Protimeter BLD5060 heavy duty moisture probe including cap
A plug-in two-pin moisture probe on a lead, for measurement in awkward corners and hard-to-reach areas.
Supplied
- Two-pin probe
- Lead
- Jack plug connector
- Cap
Compatible meters
- Protimeter MMS3
- Protimeter MMS2
- Protimeter SurveyMaster
- Protimeter Mini, Mini C and Digital Mini
- Protimeter TimberMaster
Heavy duty means it survives site use
The lightweight BLD5079 extension probe does the same job in a more delicate package. The BLD5060 is the one to carry if the probe lives in a van and gets used on masonry and structural timber rather than on finished surfaces.
Keep the cap on
The cap protects the pins and the operator. Pins carried uncapped bend, and bent pins read low — telling you a substrate is drier than it is.
Related products
Related probes
- Mini extension pin probe (BLD5079) — the lighter alternative for occasional use
- Deep wall probes 127 mm (BLD5018) — for depth rather than reach
- Heavy duty hammer electrode (BLD5055) — for driving into timber
Meters this fits
- Protimeter MMS3 — and the MMS2 it replaced
- Protimeter SurveyMaster
- Protimeter TimberMaster
- Protimeter Digital Mini
- Protimeter Mini C and Protimeter Mini
It does not fit the HygroMaster range, which measures air rather than materials, or the non-invasive Aquant and ReachMaster Pro, which take no probes at all.
Tell us which Protimeter you run and we will confirm the right part before you order.
