Product Overview
DEMA FOAMit 10 inch poly wand with spray tip, for the 25 gallon (DEMA 925) portable foamer with 3/4 inch discharge hose. It gives the operator control of the angle and flow of chemical at the hand rather than at the machine.
Fitment
FOAMit lists the poly wand assembly for its portable foam units with 3/4 inch hose. The 10 gallon foamer uses a 1/2 inch hose — check your hose size before ordering.
Control Is the Point
High-volume chemical application in a plant or a wash bay is about putting product where it is needed and nowhere else. A spray tip on a controllable wand gives you angle and flow at the operator's hand.
Match It to the Unit
Foam units are set up for a specific hose and tip. Substituting a wand or tip with a different orifice changes the flow and foam the system delivers. Tell us your set-up before you change tips.
Specifications
| CCW SKU | D9.PW10ST |
| Type | Poly wand with spray tip |
| Wand length | 10 inch (25 cm) |
| Colour | Black |
| Hose size | 3/4 inch discharge hose |
| Fits | DEMA FOAMit 25 gallon portable foamer (925) |
Frequently Asked Questions
Does it fit the 10 gallon foamer?
The 10 gallon unit uses a 1/2 inch hose. This wand is for 3/4 inch hose units.
Why change from the stainless wand?
The poly wand with spray tip gives more control over spray angle and flow.
What we see in the field
If the foam coming off the wand is patchy, don't blame the chemical straight away. Check the tip for dried product and make sure the air and solution supply are behaving properly. Rinse the wand when you're finished; dried foam concentrate is a nuisance to shift out of a small spray opening.
Tell us the chemical you plan to apply and the size of the area, and we will help you choose the right unit and seal material.
You might also like
