Replacement glide for the US Products Evolution 2 inch wand.
Fitment
- US Products Evolution wand, 2 inch
What a glide changes
A bare wand head drags, so the operator pushes harder, the head lifts at the front and the vacuum seal breaks intermittently. A glide lifts the head onto a low-friction face so it slides, and holds a consistent gap so airflow into the slot is even along its length. The wand pushes more easily, the carpet comes up drier, and the operator can work at a consistent speed.
Check the tube size
This is the 2 inch glide. The 1.5 inch version is separate.
Specifications
| Part number | 2097B; HydraMaster 108-213 (HydraMaster UK listing) |
|---|---|
| Fits | Evolution wand with 2 inch tube (HydraMaster supplies the 2 inch Evolution wand with a 16 inch head) |
| Material | Delrin (acetal), per HydraMaster's description of the Evolution wand glides and US distributor listings |
| Screws | Not stated; ask us |
Fitting
- Remove the old glide screws and lift the glide off the head.
- Clean the head face so the new glide sits flat.
- Fit the new glide and tighten the screws evenly; do not over-tighten into the head.
- Check the slot gap is even along its length before using the wand.
Frequently asked questions
Will the 1.5 inch glide fit my 2 inch wand?
No. The 2 inch Evolution has a wider 16 inch head. Order the glide for your tube size.
Does it fit other 2 inch wands?
No. It is shaped for the Evolution head. For other wands see Wand Glides.
Glides are dimension-specific. Measure your wand head or send us a photograph with a tape across it and we will confirm before you order.
