Layflat ducting for the Razorback MaxxAir low profile air mover
This lay flat ducting is suitable for use with the Razorback MaxxAir LPAM Low Profile Air Mover 50HZ/230V/AU.
Fitment
- Razorback MaxxAir LPAM low profile air mover, 50 Hz / 230 V
What layflat ducting is for
Layflat lets you put the air where the water is instead of where the machine happens to fit. Under a kitchen cabinet, into a subfloor void, behind a bath, into a wall cavity — all places an air mover cannot physically reach but its airflow can.
It packs flat, which is the other half of the point: a van carrying rigid ducting for every eventuality carries very little else.
Two rules that decide whether it works
Keep the run short and the bends gentle. Every metre and every sharp bend costs airflow, and the loss is not linear — a kinked duct can cut delivery to almost nothing while the machine sounds exactly the same.
Match the duct to the machine. Diameter and cuff arrangement differ between air movers and dehumidifiers, and a duct that does not seal at the outlet leaks its air into the room you are standing in.
The axial machine takes a different duct — the MaxxAir AAM ZE layflat ducting.
Razorback parts vary between models and production runs. Tell us the machine and its serial number and we will confirm the part before you order.
