HotShot UHT is a concentrated blend of solvents, surfactants and builders, designed to make fast work of even the toughest traffic lanes yet gentle enough to be used on wool and advanced-generation nylon carpet and fabrics.
Product code RP191000. pH 7.5.
Features
- Submicron technology ensures fast penetration into the smallest crevices and pores to release and suspend soils for easy removal (red clay soil, carbon dust, smoke damage).
- Free-rinsing neutral formula will not contribute to re-soiling.
- Contains no optical brighteners or toxic solvents. Razorback states it conforms to AS/NZS 3733:1995, AS/NZS 4849.1:2003 and IICRC S001.
- UHT: Ultra High-Temperature formulation for use with high-performance truck-mounted and portable extraction machines.
- Economical to use: dilutes at 32:1. Razorback states one litre of concentrate will clean up to 320 square metres of carpet.
Directions for use
- Vacuum the area to be cleaned thoroughly before any cleaning process.
- Pre-test in an inconspicuous area for colourfastness.
- Mix HotShot UHT with hot water at a rate of 32:1 (rates below).
- Prespray over the area to be cleaned, let dwell for 5 to 10 minutes and extract. For heavily soiled carpet use a heavier application of prespray. Do not allow prespray to dry before extracting.
- For best results follow the standard carpet cleaning practices outlined in AS/NZS 3733:1995 and IICRC S001.
Mixing rates
| Method | Rate |
|---|---|
| Pump-up sprayer | 240 ml of concentrate per 8 litres of hot water |
| In-line sprayer, yellow tip (8:1) | 1.3 litres of concentrate, then fill the container with warm water |
| In-line sprayer, brown tip (32:1) | Use neat |
| Upholstery | 16:1 |
| Booster | Compatible with CitraBoost and OxyBoost. Use as directed. |
Where HotShot UHT fits
HotShot UHT is a neutral-pH prespray built for hot-water extraction. The neutral pH is why it can go on wool and nylon. For heavier soiling on synthetics, step up to PowerShot UHT; for oily or greasy soil, add CitraBoost. Finish with an acid rinse such as e-Rinse EFR where browning or wicking is a risk.
Specifications
| Product code | RP191000 |
|---|---|
| pH | 7.5 |
| Standard dilution | 32:1 (upholstery 16:1) |
| Pack size | 4 litres |
| SKU | RP191000-4L |
Safety
From the safety data sheet (Aberford Holdings Pty Ltd (Razorback), issued April 2023):
- Signal word: WARNING
- Hazard statements: H320 Causes eye irritation
- Poisons schedule: Not scheduled
- Transport: Not classified as dangerous goods for road and rail transport (ADG Code).
Wear eye protection. If it gets in the eyes, rinse cautiously with water for several minutes and remove contact lenses if easy to do.
For poisoning advice in Australia, call the Poisons Information Centre on 13 11 26. Always read the full safety data sheet before use.
Frequently asked questions
Can I use HotShot UHT on wool?
Yes. It is pH 7.5 and made to be gentle enough for wool. Pre-test for colourfastness first.
Does it need to be used hot?
It is formulated for hot-water extraction and mixed with hot water. It will work warm, but heat is where it performs best.
Can I let it dwell longer on heavy soiling?
Give it 5 to 10 minutes and apply more product on heavy soiling, but do not let it dry before extracting.
What other size is available?
The 200 litre drum.
