Axle for a Razorback Balboa. A 20 mm wheel axle for the Balboa portable extractor, supplied to replace an axle that has worn, bent or corroded.
Specifications
| Diameter | 20 mm |
|---|---|
| Application | Razorback Balboa |
| Length | Not published — specific to the Balboa, and different from the Drago axle |
| SKU | RB2010-BALBOA |
Model-specific
This axle is for the Balboa. CCW's current Balboa models are the Balboa 700 and Balboa 700 Auto. The Drago 1600 psi takes its own axle. The diameter is the same and the length is not — check the machine before ordering.
Check the wheels while it is apart
A worn axle usually comes with worn bearings in the wheels. Replacing one and not the other means doing the job twice.
Fitting a new axle
Work on a bench rather than on the floor of a van. Support the machine so it cannot roll, and check the wheel bearings while the axle is out — a worn axle and worn bearings almost always arrive together, and replacing one without the other means doing the job twice.
What a worn axle looks like
A wheel that wobbles or sits out of line, a machine that pulls to one side when wheeled, or a wheel that has started to rub the frame. None of those are urgent faults and all of them make the machine harder to control on a ramp or a staircase, which is where damage to a property happens.
Frequently asked questions
Will the Drago axle fit my Balboa?
No. Both are 20 mm in diameter but the lengths differ. Order the axle for your model.
Are wheels or fixings included?
No. This listing is the axle only.
I am not sure which machine I have. What do you need?
The model and serial number from the machine plate. We will confirm the axle before you order.
Razorback parts vary between models and production runs. Tell us the machine and its serial number and we will confirm the part before you order.
