New Stain Zone removes a wide range of difficult stains such as mustard, furniture and wood stains, shoe polish, urine stains, vomit, pigments, coffee, tea, and other organic dyes and materials.
Stain Zone is a single product system and doesn’t require mixing, special sprayers, or anything else! Stain Zone works by removing, oxidising, or making invisible stains that resist conventional spotting.
When residual discolouration remains, this product will continue to work as it dries.
Single Product Stain Remover - Single product system
Caution:
- For use with synthetic carpet or fabrics only
- Not recommended for natural fabrics
- For professional use only.
Dilution Ratios: RTU RTU pH: 5.5 Contains:946ml
Information Documents
Choosing a spotter by stain type
Spotting failures are almost always a chemistry mismatch, not a technique problem. The pH of the spotter has to suit what you are removing.
| Stain | Chemistry | Product |
| Protein — blood, milk, vomit, egg, food | Alkaline, pH 10.5 | Protein Spotter |
| Rust | Acidic, pH 4.5, no neutralising needed | T-Rust |
| Coffee and tea | Acidic, pH 4–4.5, applied hot | Coffee Stain Remover |
| Red food dye, cordial, sports drink | Neutral, pH 7–7.5 | Red Zone Ready |
| Mixed or unknown organic and synthetic dyes | Oxidising system | Stain Zone |
| Chewing gum, tar, oily spots | Citrus solvent gel | Gel Break |
| General purpose, wide range | Solvent-based | Avenge Stain Remover |
Finish with a residue rinse. Professional-strength spotters leave residue that attracts soil and can wick back. Spot Stop neutralises alkaline residue and lays down an encapsulating polymer, which is what stops the mark reappearing a week later.
Frequently asked questions
Why did the spot come back?
Two usual causes. Either contamination remains below the surface and has wicked back up as the carpet dried, or spotter residue has been left in the pile and is attracting soil. A residue rinse with Spot Stop addresses the second; the first needs proper extraction of the affected area.
Can I use an alkaline spotter on any stain?
No. Alkaline spotters suit protein. On rust or coffee they achieve nothing and can set the stain. Match the chemistry to the stain — see the table above.
Do I need to neutralise after spotting?
After alkaline spotters, yes. T-Rust is the exception — Bridgepoint state it requires no neutralising and rinses with clear water. In general, leaving a professional-strength spotter in the pile without rinsing creates a resoiling problem where you solved a stain problem.
Will these damage wool or natural fibre?
Check the label before use. Several of the oxidising products are specified for synthetic carpet and fabrics only and are not recommended for natural fibres. Test in an inconspicuous area on anything you have not treated before.
Is the documentation Australian?
The safety data sheet is the Australian edition, issued by Aberford Holdings Pty Ltd (Carpet Cleaners Warehouse) as the Australian importer and classified to Australian GHS and ADG requirements. The label, specification sheet and cleaning guide are Bridgepoint’s United States editions, provided for technical reference; the Australian SDS takes precedence where they differ.
Specifications
| Brand / product | Bridgepoint Stain Zone |
|---|---|
| CCW SKU | CS28QT |
| Pack | 946 mL (1 US quart) |
| Classification | Hazardous chemical, signal word Danger. Shipped as dangerous goods Class 5.1 (oxidising), UN 2984, Packing Group III (Aberford Holdings decision; see SDS Section 16). Poisons Schedule not verified |
| Hazard statements | H332 Harmful if inhaled; H315 Causes skin irritation; H318 Causes serious eye damage |
| Transport | Shipped as dangerous goods, Class 5.1, UN 2984 HYDROGEN PEROXIDE, AQUEOUS SOLUTION, PG III. DG surcharge applies |
| Safety data sheet | Stain Zone SDS (PDF), Australian edition issued by Aberford Holdings Pty Ltd (Carpet Cleaners Warehouse), version 1.0, issued 29 October 2026 |
Safety
- Classified as a hazardous chemical, signal word Danger: harmful if inhaled, causes skin irritation and serious eye damage. It contains hydrogen peroxide (up to 8%) and glycol ether solvents and is an oxidiser.
- Keep it away from combustible materials and do not return unused product to the bottle. Avoid breathing the mist; use with ventilation.
- Wear chemical-resistant gloves and chemical goggles, and wash hands after use.
- If it gets in the eyes, rinse with water for at least 15 minutes and get medical attention immediately. For poisons advice, call 13 11 26.
- Shipped as dangerous goods: Class 5.1 oxidising liquid, UN 2984.
Read the safety data sheet before first use.
Documents
- Safety Data Sheet – Australian edition, version 1.0, issued 29 October 2026 (PDF)
- Safety Data Sheet (United States edition, Bridgepoint, February 2023) (PDF)
- Product Label (PDF)
- Self-Print Mini Labels (DOC)
- Specification Sheet (PDF)
- Stain Removal & Cleaning Guide (PDF)
Bridgepoint documentation is published in the United States. Labels, specification sheets and cleaning guides are the North American editions and are provided for technical reference. Australian classification, transport and disposal requirements take precedence.
