A 38L pneumatic portable fogger that operates on compressed air.
Draws from pre-mixed solution
Powered by compressed air
3 nozzles mounted on a telescoping mast
Droplet size: 15 microns at 50 psi (3.4 bar)
Polypropylene and Kynar nozzle construction
A full tank of solution will supply the unit for approximately 1.5 hours
Optional timer with delay functionality - start the unit and leave the room before it begins fogging
The hinged back plate provides tool-free access to components
Quick-change pump
Natural colour tank for easy visibility of product levels
Hinged lid
Front-facing drain
In-line filter to protect the pump from debris
Requirements
COMPRESSED AIR
50 psi (3.4 bar) with 7 cfm (198.3 l/min)
LIQUID TEMPERATURE RANGE
4.4-37˚C
CHEMICAL COMPATIBILITY
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Specifications
POWER TYPE
Compressed air
CHEMICAL PICKUP TYPE
Draws from pre-mixed solution
NUMBER OF PRODUCTS THE UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)
One product
SUCTION LINE LENGTH/DIAMETER
9.5 mm inside diameter
CAPACITY
47.32 litres
FLOW RATE*
3.7 gal/hour (14 l/hour) at each nozzle
PUMP SEALS
Santoprene, (optional Viton, or Kalrez)
DROPLET SIZE
15 microns at 50 psi (3.4 bar)
COVERAGE AREA**
1 litre of solution will cover approximately 1000 cubic feet (28.3 cubic meters), up to a system max of 47,320 cubic feet (1340 cubic meters)
RUN TIME FROM FULL TANK**
Approx. 1.5 hours
NUMBER OF NOZZLES
3 nozzles
WHEEL TYPE
Two 25.4 cm non-marking wheels
MAST HEIGHT
1.1 meters to 2.6 meters
RUN TIMER
optional (allow 4-5 months delivery)
The fogger user manual for this product used to be linked here from the manufacturer. FOAMit rebuilt its website and the manual is no longer published — the link on FOAMit’s own support page is broken too. The link here also pointed at the two-nozzle manual, which is the wrong document for this three-nozzle unit. We have removed the link rather than leave you clicking on nothing, and we have asked FOAMit for a current copy to host ourselves. If you need the manual now, ask us and we will get it for you.
