Injectidry panel and wall vent carry bag, large
Injectidry Panel and Wall Vent Carry Bag 51" x 32"
Specifications
| Dimensions | 51 x 32 inches (1295 x 813 mm) |
|---|---|
| Holds | Panels and wall vents |
| Brand | Injectidry |
| Injectidry part | CB3 (Panel and Wall Vent Carry Bag 51" x 32") |
| Sold as | Each |
| CCW SKU | IDCB3 |
Panels are awkward, and that is the point of the bag
Drying panels are large, flat and easily damaged at the edges. Carried loose they get bent, and a panel that will not sit flat will not seal — which means the negative pressure goes into the room instead of the cavity.
It also keeps a used panel out of the cab. Panels come off a job carrying whatever the cavity held.
For the fittings and small parts, the rolling duffel is the companion bag.
What Goes In It
The CB3 is Injectidry's bag for the large, flat parts of a drying system:
- Vac-It floor panels — the 8-point panel (36 x 30 in), the slim panel kit and the Extra Slim (XSP) panel
- 2 ft and 4 ft wall vents from the Specialty Adapter and Adaptidry packages
Injectidry does not publish how many panels or vents the bag holds. As a guide only, the bag's flat size (1295 x 813 mm) is larger than a 36 x 30 inch 8-point panel (914 x 762 mm).
Looking After Panels in the Bag
- Wipe panels clean and let them dry before they go in. A wet panel packed away stays wet, and a bag of damp panels smells by the next job.
- Pack panels flat and face to face, seal edges protected. The seal is what makes the panel work.
- Keep sharp fittings, screws and tools out of this bag — they go in the rolling duffel.
- After a Category 2 or 3 loss, clean and disinfect panels to your normal job procedure before bagging, and clean the bag if anything went in dirty.
Frequently Asked Questions
How many panels will it hold?
Injectidry does not state a panel count. It depends on the panel type and how many wall vents share the bag. If you are planning a kit, tell us what you run and we will give you a practical answer.
Is this the bag that comes in the Injectidry packages?
Injectidry sells the CB3 separately. What bag ships with a particular Injectidry package depends on the package — check its contents list, or ask us.
What is the difference between the CB3 and the rolling duffel?
The CB3 is a flat 51 x 32 inch bag for panels and vents. The CB2 rolling duffel (38 x 16 x 16 in) is for the small parts — manifolds, caps, connectors, injectors and tubing.
Related Products
- Injectidry Rolling Duffel Bag
- Injectidry Vac-It 8-Point Panel
- Injectidry Vac-It Slim Panel Kit
- Injectidry HP-PLUS 240V Floor Drying Package
- All Injectidry parts
Injectidry parts are system-specific — HP and Direct-It use different connections. Tell us which system you run and we will confirm the part before you order.
