Jet tube with sleeve for the PMF AW51D HyDry Deluxe tool
The internal jet tube assembly, complete with sleeve, for the 4.5 inch PMF HyDry Deluxe upholstery tool (AW51D).
Specifications
| Application | PMF AW51D HyDry Deluxe, 4.5 inch |
|---|---|
| Supplied | Jet tube with sleeve |
When the jet tube is the fault
Internal-jet tools spray from inside the head, so a partially blocked or corroded jet tube shows up as a weak or lopsided spray pattern that cannot be fixed by cleaning the visible parts. If the tool has lost coverage on one side, or the pattern has gone from a fan to a stream, the tube is where to look.
Fitment
Specified for the AW51D. We have not verified that it fits other PMF tools. If you are servicing the 3.5 inch AW50D, or an AW51A, AW50A or AW45, tell us and we will confirm the right part rather than assume.
Frequently asked questions
Can I clear a blocked tube instead of replacing it?
Often, yes. Flush it and clean the jet. Replace the tube if it is corroded, cracked or still sprays unevenly after cleaning.
Does it include the jet tip?
This listing is the jet tube with sleeve. If you need a jet tip as well, ask us and we will confirm the size for your tool.
What we see in the field
A HyDry that's spraying sideways may only need its jet tube cleaned or reseated. Lay the tiny parts out in order when you pull it apart — they're easy to lose.
Tell us the wand or tool you are working on and we will confirm the part before you order.
