HydraMaster RX20 Micro Switch

Overview

Micro switch for the HydraMaster RX-20 rotary extractor. HydraMaster part number 000-157-032, listed as Switch, Micro.

The micro switch sits in the trigger assembly and controls solution flow. A worn switch shows up as solution that will not shut off cleanly, or a trigger that has to be held at an angle to work.

Specifications

• HydraMaster part number: 000-157-032
• Fitted in the handle trigger assembly, alongside the chrome momentary switch 000-157-151

Which RX-20 does this fit?

HydraMaster has built the RX-20 since the 1980s and there have been many revisions. Carpet Cleaners Warehouse supplies the current machine, the RX20 NEXTGEN, model 700-041-036 (CE, 230 V, 50 Hz).

The current owner's manual, MAN-47328 Rev. B (March 2019), covers models 700-041-030, -031, -032, -035, -036, -330, -331, -332, -333, -334 and -407. Earlier machines are covered by their own editions, going back to c. 1987.

Before ordering, check the model number on your machine's data plate. If you are unsure, contact us with the number and we will confirm the correct part.

Confirmed against the HydraMaster parts lists in the 2011 owner’s manual (models 700-041-006 and -007), the 2014 edition (700-041-006, -007, -014, -316, -318 and -322) and the current 2019 NEXTGEN edition, MAN-47328 Rev. B.

In the NEXTGEN parts lists it is item 62 of upper and lower handle assembly 604-051-213, one per machine. That is the 230 V 50 Hz CE handle — the handle fitted to model 700-041-036, which is the machine we supply.

Documents

• Owner’s Manual — MAN-47328 Rev. B, March 2019 (PDF, 15 MB)

This manual covers models 700-041-030, -031, -032, -035, -036, -330, -331, -332, -333, -334 and -407. If your machine is older, contact us with the model number from the data plate and we will send the edition that matches it.