Replacement pressure gauge reading to 2,500 psi, for higher-pressure portable extractors and hard-surface work.
Read the Range Before You Buy
A gauge is most accurate through the middle of its range. A 2,500 psi gauge on a machine running 400 psi puts your working pressure in the first sixth of the dial, where small movements are hard to read. Match the gauge to the machine. For a 500 psi carpet cleaning portable, a 600 psi gauge gives a far more useful dial. This 2,500 psi gauge suits machines running high pressure for tile and hard-surface cleaning.
Fits
- Razorback Drago fibreglass portables
- Razorback Balboa fibreglass portables
- Razorback Creed fibreglass portables
It suits any Razorback fibreglass portable. For other machines, check the thread and dial size of your existing gauge, or send us a photo and the model.
Fitting
- Release all pressure from the system and switch the machine off.
- Unscrew the old gauge.
- Clean the thread and apply suitable thread sealant.
- Fit the new gauge, tighten by the hex, not the case, and check for leaks under pressure.
Specifications
| Part | Pressure gauge |
|---|---|
| CCW SKU | SV3259 |
| Range | 0–2,500 psi |
| Fits | Razorback fibreglass portables: Drago, Balboa, Creed |
| Thread / dial size | Ask us |
Frequently Asked Questions
Will it fit my machine?
It fits Razorback fibreglass portables (Drago, Balboa, Creed). For other machines, send us a photo and the model.
Why not use a 2,500 psi gauge on a carpet machine?
It works, but at carpet pressures the needle sits near zero and is hard to read. Use a 600 psi gauge for carpet work.
Why does my gauge needle shake?
Pump pulsation. It is normal to a degree; a liquid-filled gauge damps it.
Tell us the machine and its serial number, and we will confirm the part before you order.
