Axle for a Razorback Drago 1600psi. A 20 mm wheel axle for the Drago portable extractor, supplied to replace an axle that has worn, bent or corroded.
Specifications
| Diameter | 20 mm |
|---|---|
| Application | Razorback Drago 1600 psi |
| Length | Not published — specific to the Drago, and different from the Balboa axle |
| SKU | RB2010-DRAGO |
Model-specific
This axle is for the Drago 1600 psi. CCW's current Drago models are the Drago 1600 and Drago 1600 Auto. The Balboa takes its own axle. Check the machine before ordering.
Fitting a new axle
Work on a bench rather than on the floor of a van. Support the machine so it cannot roll, and check the wheel bearings while the axle is out — a worn axle and worn bearings almost always arrive together, and replacing one without the other means doing the job twice.
What a worn axle looks like
A wheel that wobbles or sits out of line, a machine that pulls to one side when wheeled, or a wheel that has started to rub the frame. None of those are urgent faults and all of them make the machine harder to control on a ramp or a staircase, which is where damage to a property happens.
Frequently asked questions
Will the Balboa axle fit my Drago?
No. Both are 20 mm in diameter but the lengths differ. Order the axle for your model.
Are wheels or fixings included?
No. This listing is the axle only.
I am not sure which machine I have. What do you need?
The model and serial number from the machine plate. We will confirm the axle before you order.
Razorback parts vary between models and production runs. Tell us the machine and its serial number and we will confirm the part before you order.
