Protimeter wire hole brush, 3/4 inch
A wire brush sized to clean out a 3/4 inch drilled hole before a humidity sleeve is inserted.
Specifications
| Part number | BLD4653 |
|---|---|
| Diameter | 3/4 inch (19 mm) |
| Function | Clears drilling dust from the hole before the sleeve is fitted |
The step that gets skipped
Concrete dust left in a drilled hole holds its own moisture and changes what the sensor equilibrates with. Every in-situ relative humidity method calls for the hole to be cleared, and it is the step most often rushed because nothing obviously goes wrong when you skip it.
What goes wrong is subtler: the reading is slightly off, in an unpredictable direction, and there is no way to tell from the number itself. On a floor that is close to the limit, that is the difference between laying and not laying.
Matching bit: the 3/4 inch masonry drill bit.
Tell us which Protimeter you run and we will confirm the right part before you order.
