Injectidry inline manifold, 1.25 inch push to connect
Injectidry 1.25" Push to Connect Inline Manifold for use with HP products
Specifications
| Size | 1.25 inch |
|---|---|
| Connection | Push to connect |
| System | Injectidry HP |
How the HP system works
Injectidry HP is a negative-pressure wall drying system. A blower pulls air out of a wall cavity through a manifold and a set of hose lines; injectors let replacement air in through small holes drilled in the lining. Air moves through the cavity rather than past it, which is the only way to dry a wall without opening it up.
Everything in the range is about maintaining that airflow path. A leak anywhere in the manifold, a capped port left open, or a blocked injector, and the system draws the easy air instead of the air you need moved.
Building the run
Inline manifolds let you take multiple hose lines off a single run without breaking it. That is what makes it practical to dry a long wall or several rooms from one blower — you extend the run and tap off it rather than running separate lines back to the machine.
Push-to-connect fittings seal on the tube, so cut the tube square. A tube cut at an angle will hold mechanically and leak.
Close the end of a run with an end cap. Join to hose with a hose barb.
Injectidry parts are system-specific — HP and Direct-It use different connections. Tell us which system you run and we will confirm the part before you order.
