
Product Overview
The Razorback MaxxAir LPAM Variable Speed is a low profile air mover for water damage restoration and carpet drying. It stands 21 cm high, weighs 9.5 kg and runs on standard 240 V mains, drawing 0.78 A. A rotary dial sets the speed anywhere between Low and Max, so you can match the airflow to the job rather than choosing between fixed speeds.
The low, flat housing pushes air across the floor surface, sits in places a taller air mover will not, and stacks for transport and storage.
Key Features
- Variable speed control on a rotary dial, Low to Max
- Low current draw: 0.78 A at 240 V
- Low profile housing, 21 cm high
- Three operating positions to direct the airflow
- Stackable for transport and storage
- Built-in carry handle and cord wrap
- Circuit breaker
- 4.5 m power cord
- Accepts the optional Razorback MaxxAir Filter Add-On
Applications
- Water damage and flood restoration
- Drying carpet and hard floors after cleaning
- Subfloors, crawl spaces and other low-clearance areas
- General structural drying alongside dehumidifiers
Who Should Consider Something Else
- If you need high-volume airflow over a long distance, look at an axial unit such as the Razorback MaxxAir AAM Axial Air Mover.
- If the job specifies HEPA air filtration, use a dedicated air scrubber such as the Razorback MaxxGuard 550. An air mover with a filter fitted is not a substitute.
Technical Specifications
| SKU | RBR-MALPAM-VS |
|---|---|
| Supply | 240 V, 50 Hz, Australian plug |
| Rated power | 160 W |
| Current draw | 0.78 A |
| Motor speed | 1380 RPM |
| Speed control | Variable, rotary dial (Low to Max) |
| Airflow | Not yet confirmed |
| Dimensions (L x W x H) | 50 x 42.5 x 21 cm |
| Carton size | 55 x 43.5 x 23 cm |
| Weight | 9.5 kg |
| Power cord | 4.5 m |
Power, current draw and motor speed are taken from the rating label on the unit. We have not listed airflow because we do not yet hold a confirmed figure.
Operating Advice
- Plug into an earthed outlet on an RCD-protected circuit.
- Indoor use only. Do not operate in standing water or rain.
- Place on a level, stable surface and keep the air intake and outlet clear.
- Switch off before moving the unit.
- Do not use near flammable liquids or vapours.
Maintenance
- Before each job, check the cord and plug for damage and check for loose fasteners.
- Keep the intake screens clean. Blocked screens cut airflow and make the motor work harder.
- Periodically remove lint from the motor, screens and blower wheel with compressed air or a vacuum.
- Do not clean with a pressure washer.
- If the unit sounds different to normal, stop and have it checked.
Frequently Asked Questions
How many can I run on one circuit?
The rating label shows 0.78 A at 240 V, so several units can share a standard 10 A circuit. Add up everything else on that circuit, including dehumidifiers, before you plug in.
Can the units be stacked?
Yes. The housing is designed to stack for transport and storage.
Does the filter add-on turn it into an air scrubber?
The filter add-on filters the air the unit draws in. Its filtration grade has not been confirmed, so do not rely on it where HEPA filtration is specified.
Can I use it outdoors?
No. It is for indoor use only and must be kept out of standing water and rain.
Not sure which air mover suits your work? Contact Carpet Cleaners Warehouse and we will help you choose before you order.