Multi-Purpose Stain Remover
All Solv Extreme is a multi-purpose gelled solvent formulated for use on carpet and fabric that is designed to remove ballpoint pen, stamp pad, duplicating, marking, writing, felt tip, and coloured art inks. It also works effectively on latex, enamel, spray, and other types of paints. It can also be used to remove shoe polish, nail polish, cosmetics, and adhesives. It has been specially formulated to be in compliance with the latest emission regulations and to work with Bridgepoint’s Avenge Pro™ Stain Remover.
- Uses a variety of solvents to expand the type of stains that it is effective at removing.
- Special gel design to limit penetration and evaporation of solvents before their work is completed.
- VOC compliant in all states.
- The surfactant in the formula allows the product to rinse with water. Use with Avenge Pro™ to provide the ultimate in-free rinsing.
pH and fibre compatibility
Bridgepoint publish a pH figure for most products in this range, and it is the single most useful number when deciding what to put on a floor.
| pH | Typical use | Fibre caution |
| 2.8 to 5.5 | Fibre set, encapsulating guards, acid rinses, protectors | Suits wool and natural fibre. Strongly acidic products can affect some dyes — test first. |
| 6.5 to 8 | Shampoos, fabric prespray, general cleaning | Broadly fibre safe including wool. |
| 9 to 10 | Encapsulants, powders, general prespray | Usually fine on synthetic. Check the label before use on wool. |
| 11 and above | Traffic lane cleaners, fire restoration, heavy degreasing | Synthetic only unless the label says otherwise. High alkalinity damages wool and can cause browning on natural fibre. |
Rinse to a neutral or slightly acidic finish. Alkaline residue left in the pile attracts soil and can cause the carpet to resoil faster than before it was cleaned. That is what an acid rinse is for, and why the pH of the rinse matters as much as the pH of the prespray.
Frequently asked questions
Can I use this on wool?
Check the pH against the table above and read the label. Products at pH 11 and above are for synthetic fibre unless Bridgepoint state otherwise. Wool tolerates a much narrower pH band than nylon, and alkaline damage is not reversible.
Why does my carpet resoil quickly after cleaning?
Usually alkaline residue left in the pile. High pH cleaners work by breaking down soil, but anything left behind stays sticky. Rinsing to a neutral or slightly acidic finish is what prevents it.
Do I need to dilute exactly?
Yes. The dilution on the label is what the published pH refers to. Running a product stronger than specified moves the pH further from neutral, which increases both cleaning power and the risk to the fibre.
Is the documentation Australian?
The safety data sheet is the Australian edition, issued by Aberford Holdings Pty Ltd (Carpet Cleaners Warehouse) as the Australian importer and classified to Australian GHS and ADG requirements. The label, specification sheet and cleaning guide are Bridgepoint’s United States editions, provided for technical reference; the Australian SDS takes precedence where they differ.
Specifications
| Brand / product | Bridgepoint All Solv Extreme |
|---|---|
| CCW SKU | CS01A |
| Pack | 354 mL (12 US fl oz) |
| Classification | Hazardous chemical, signal word Danger. Dangerous goods Class 3 (flammable liquid), UN 1993, Packing Group II. Poisons Schedule not verified |
| Hazard statements | H225 Highly flammable liquid and vapour; H315 Causes skin irritation; H318 Causes serious eye damage; H335 May cause respiratory irritation; H336 May cause drowsiness or dizziness |
| Transport | Dangerous goods, Class 3, UN 1993 FLAMMABLE LIQUID, N.O.S. (acetone, diethylene glycol monobutyl ether), PG II. Shipped as full dangerous goods; DG surcharge applies |
| Safety data sheet | All Solv Extreme SDS (PDF), Australian edition issued by Aberford Holdings Pty Ltd (Carpet Cleaners Warehouse), version 1.0, issued 29 October 2026 |
Safety
- Classified as a hazardous chemical, signal word Danger: highly flammable, causes skin irritation and serious eye damage, and vapour may cause drowsiness or dizziness. It contains acetone and glycol ether solvents.
- Keep it away from heat, sparks, flames and hot surfaces, including truckmount exhausts and heaters. No smoking. Use with ventilation.
- Wear chemical-resistant gloves and chemical goggles when applying it, and wash hands after use.
- If it gets in the eyes, rinse with water for at least 15 minutes and get medical attention immediately. For poisons advice, call 13 11 26.
- Dangerous goods for transport: Class 3 flammable liquid, UN 1993.
Read the safety data sheet before first use.
Documents
- Safety Data Sheet – Australian edition, version 1.0, issued 29 October 2026 (PDF)
- Safety Data Sheet (United States edition, Bridgepoint, February 2023) (PDF)
- Product Label (PDF)
- Specification Sheet (PDF)
- Stain Removal & Cleaning Guide (PDF)
Bridgepoint documentation is published in the United States. Labels, specification sheets and cleaning guides are the North American editions and are provided for technical reference. Australian classification, transport and disposal requirements take precedence.
