Overview
On/off switch for the Razorback Sandia extractor. Sandia part number 10-0803.
Important — this is the extractor switch, not the spotter switch
Sandia use different switches across the range and they are not interchangeable:
- 10-0803 — extractor. This part.
- 10-0025 — backpacks and spotters, two per machine on the 3-gallon Spot-XTract.
Check the machine before ordering. We could not locate 10-0803 in the Sandia parts documentation we hold — our SpotX manual covers the 3-gallon spotter, not the extractor range — so the fitment above rests on CCW's own record rather than a manufacturer parts list.
Send us the machine model and a photo of the switch, with the terminals visible, and we will confirm before you order.
Check the switch before the motor
A rocker switch on an extractor is operated many times a day on a machine that gets wet and knocked about. It is one of the most likely things to fail and one of the cheapest to replace.
- One function works and another does not — a switch fault. Motors and pumps do not fail selectively like that.
- Works only if you hold the rocker — worn contacts.
- Nothing at all — check the lead and the strain relief first. A cord damaged where it enters a dragged machine is common.
Electrical safety
Isolate at the plug before you start. Anything showing corrosion at the terminals comes out of service until properly checked — this is wet-use equipment, and workplace electrical testing and tagging obligations generally apply.
Photograph the wiring before you disconnect anything, and note the switch's orientation.
Measure before you order
Rocker switches look near-identical across body sizes and pole configurations. Check the panel cut-out and count the terminals on the one you are removing.
Frequently asked questions
Will it fit my spotter?
No — that takes 10-0025.
Which extractors does it suit?
CCW's record lists it for the Sandia extractor range. We could not confirm it against a parts list — send us the model and we will check.
What are the electrical ratings?
Not stated in the documentation we hold. Ask us if you need the specification.
Send us the machine model and a photo of the switch terminals and we will confirm before you order.
