Solution hose for the SX-12 tile cleaning tool, 3/16 inch x 48 inch
Solution hose for SX-12 Tile Cleaning Tool 3/16" X 48" HP Hose with 1/4" MPT X 1/4FT hose ends *Notice: Maximum temperature rating of 100° C
Specifications
| Bore | 3/16 inch |
|---|---|
| Length | 48 inches (1.2 m) |
| Ends | 1/4 inch MPT x 1/4 inch FPT |
| Maximum temperature | 100 °C |
| Application | Hydro-Force SX-12 tile cleaning tool |
Important — the temperature limit is real
This hose is rated to 100 °C. A truckmount can deliver solution hotter than that. Running a high-pressure hose above its temperature rating does not produce a gradual failure — it produces a burst, with hot solution at pressure, usually where the operator is holding it.
If your machine runs hotter than 100 °C at the tool, tell us before you order and we will source a hose rated for it.
Replace it before it fails
High pressure hose on a hard surface tool is dragged across grout and tile all day. Check for abrasion at the ends and anywhere it rubs the tool, and replace on wear rather than on failure.
Tell us the tool or machine you are fitting this to and we will confirm it before you order.
