Tramex SP52 spare pins – 35 mm, 10 pack
Genuine Tramex replacement pins for the hammer-action probe, for deep moisture readings in timber, drywall and other building materials.
Specifications
| Model | SP52 |
| Length | 35 mm |
| Pack size | 10 |
Fits
The pins are the same for both probe versions – it is the probe's meter connector that differs, not the pins.
Change them before they mislead you
Pins are consumable. A bent or blunt pin makes poor contact and reads low; worn or chipped insulation lets the pin read along its length instead of at the tip, which quietly turns a depth reading into a surface reading. Neither failure announces itself – the meter still gives a number. Replace pins on condition, not when they finally break.
Not sure which pins fit your probe? Contact Carpet Cleaners Warehouse with the probe or meter model before ordering.
