PMF 4.5 inch upholstery tool, 500 psi, stainless head, internal jets
The wider stainless upholstery tool in the range, with internal jets, rated to 500 psi.
Specifications
| Head width | 4.5 inch (114 mm) |
|---|---|
| Maximum pressure | 500 psi |
| Head material | Stainless steel |
| Jet arrangement | Internal |
Where the extra inch earns its keep
On lounge cushions, mattresses and vehicle seats the wider head covers ground faster and leaves fewer overlap marks. On tight upholstery — dining chairs, arms, piping — it is the wrong tool, because you cannot keep the whole slot in contact and the vacuum breaks. Most operators carry both a 3.5 and a 4.5.
The 3.5 inch equivalents are the AW50A with a stainless head and the AW50-U1560PSB with a plastic head.
Service parts
- Valve repair kit: V5B repair kit for V, V1245 and V4N series valves
- Solution hose: 12 inch upholstery tool hose
- Jet tube assembly for the AW51D variant: jet tube with sleeve
Jets are consumables
Jets wear invisibly. A worn jet changes the spray pattern, drops the solution temperature reaching the fibre and alters chemical draw — and the result reads as uneven cleaning rather than a worn part. Replace brass jets every six months and stainless jets annually on a tool in regular use.
Tell us the machine and the pressure you run and we will confirm the right tool before you order.
