Swivel cuff, 2 inch, for Hide-A-Hose
Now you can hide your solution hose within the vacuum hose line and you can forget the hassles of trying to work with separate hoses lying all around! 2inch/50mm
What Hide-A-Hose changes on a job
Running the solution line inside the vacuum hose leaves one hose on the floor instead of two. That is not just tidiness — two loose hoses catch on furniture, mark skirtings and are the most common trip hazard a technician creates in an occupied property. One hose is faster to lay, faster to pull back and far less likely to end in a damage claim.
Why the swivel matters
A cuff that does not swivel transmits every twist of the hose into the wand, and the operator ends up fighting the line instead of cleaning. On a long run the hose will otherwise wind itself up over the course of a room.
Important — Hide-A-Hose and PMF valves
If you are building a Hide-A-Hose wand around a PMF V4N valve, PMF specifies that a special internal inlet valve must be used with Hide-A-Hose. Tell us what you are assembling and we will make sure the right internal part comes with it.
Tell us the tool or machine you are fitting this to and we will confirm it before you order.
