Vacuum hose connector, 1.5 inch to 1.5 inch
Used to connect two sections of 1 1/2" vacuum hose together. Cuffs slip over hose barbs on each end. Made of indestructible polymer.
Specifications
| Connects | 1.5 inch to 1.5 inch vacuum hose |
|---|---|
| Fitting | Cuffs slip over the hose barbs at each end |
| Material | Polymer |
Joining hose costs you airflow — but less than the alternative
Every joint in a vacuum line is a restriction and a potential leak, and vacuum performance falls off with total hose length. That said, a properly cuffed joint loses far less than a damaged section of hose that is drawing air along its length.
If you are joining hose because a run has been cut out, that is good practice. If you are joining hose to reach further, check whether the machine still has the lift to do the job before you add the length.
Different sizes?
To go from 2 inch hose to a 1.5 inch wand, the part is the Vac Attack adapter.
Tell us the tool or machine you are fitting this to and we will confirm it before you order.
