Power Strip is a new generation floor coating stripper that is guaranteed to work quickly and effectively, saving you time and money. Powerstrip is possibly the most advanced floor coating stripper on the market today. Powerstrip is designed to tackle tough solvent sealers and polish build-ups on resilient flooring such as terracotta, terrazzo and concrete. This truly is a remarkable achievement in coatings removal technology. Safer, more powerful stripping solutions mean peace of mind for everybody.
BENEFITS
- Power-packed – Serious stripping action on solvent based coatings, burnish build-ups and semi-permanent sealers.
- Fresh Fragrance – Fresh citrus fragrance makes Powerstrip pleasant to use.
- Fast action – begins to liquefy coating immediately on contact with the surface.
- Labour saving – Minimal scrubbing is required, ensuring that time and labour are minimised. Powerstrip is highly economical in use.
- Versatile – Safe to use on a wide variety of surfaces.
- Low odour, Low Foam – Minimises user discomfort.
- Free rinsing – Exceptionally easy to rinse slurry and residues.
Recommended applications:
Powerstrip is safe for use on most resilient floors and quickly softens and emulsifies old, worn and discoloured finishes for easy removal. Powerstrip is ideal for removing solvent sealers, base sealers and polish build-ups from natural stone, concrete and terrazzo. Do not use on wood, vinyl, linoleum or plastic flooring.
HOW TO USE
Read and understand the MSDS before use. Always pre-test in an inconspicuous location. Power strip can be used at a dilution of 1:10 for removing light build-ups, or up to 1:4 for heavy build-up and UHS burnished coatings.
***Do not use on vinyl and linoleum floors***
Directions:
- Sweep the area thoroughly to remove any soiling that could damage the floor if caught under scrubbing equipment
- Apply solution liberally to the floor area with a cotton mop, ensuring that the area is thoroughly wet. (Always work in small controllable area sizes)
- Allow at least 5 minutes dwell time and then agitate with a low-speed rotary scrubber or auto-scrubber fitted with a black, brown or high productivity pad.
- Be careful to ensure that the area does not “dry out” on the surface.
- After scrubbing, pick up the slurry and rinse thoroughly with clean water to ensure that all stripper and sealer residues are removed.
- Allow the floor to dry before proceeding with the restoration process and re-strip any areas that may still have polish build-up or that were missed in the first application.
Colour: Orange/Tan
pH: 12
Fragrance: Mild
Dilution: 1:4 to 1:10
Safety profile: Non-hazardous
SKU: AP404.05
