Gekko replacement brush for the AR51H, 14 inch
This 14” brush is a replacement brush for AR51H. Simply remove the screws holding the brush assembly (comprised of the plastic shell, rubber seal and brush) to replace the brush.
Specifications
| Width | 14 inch (356 mm) |
|---|---|
| Fits | Hydro-Force AR51H Gekko head |
| Assembly | Plastic shell, rubber seal and brush |
Replacing it
The brush assembly — plastic shell, rubber seal and brush — comes off as a unit once the retaining screws are removed. Check the rubber seal while you have it apart: a hardened seal loses vacuum at the head, and the symptom is poor recovery rather than an obvious leak.
When to replace rather than persist
Brush filaments shorten and splay with use. A worn brush stops agitating and starts skating, and on grout lines that means the tool is pushing soil around rather than lifting it. If the tool has started needing two passes where it used to need one, look at the brush before you look at the chemistry.
The spec sheet for the Gekko range is linked on the AR51H product page.
Tell us the tool or machine you are fitting this to and we will confirm it before you order.
