Encap-HydrOx Powerful Hydrogen Peroxide Encapsulation Detergent

Encapsulation Carpet Cleaning Products.

Releasit Encap-HydrOx is a total carpet cleaning system that handles a wide range of carpet care needs.

With its hydrogen fortified encapsulation formula, Encap-HydrOx is a unique 7-in-1 textile cleaning product:

Encap-HydrOx is an encapsulating shampoo.
Encap-HydrOx is an encapsulating bonnet/pad cleaner.
Encap-HydrOx is an encapsulating hot water extraction detergent.
Encap-HydrOx is an encapsulating traffic lane cleaner.
Encap-HydrOx is an encapsulating de-browner.
Encap-HydrOx is an encapsulating upholstery cleaner.

Releasit Encap-HydrOx is an environmentally friendly product. It's formulated with a special hydrogen peroxide-stable encapsulation polymer that crystallizes beautifully.

Releasit Encap-HydrOx adds OXYGEN to the cleaning to loosen organic-based soil and remove browning. Encap-HydrOx can be used in a wide variety of cleaning applications.

Releasit Encap-HydrOx Unlocks protein soil from the fiber.

Releasit Encap-HydrOx Brightens the carpet naturally (NO Optical Brighteners).

Releasit Encap-HydrOx combines a HIGHLY ACTIVE hydrogen peroxide detergent blend with a special crystallizing polymer. The crystallizing polymer captures soil. The encapsulated residue that is left in the carpet following cleaning can be extracted from the carpet during the routine post-vacuuming process.

The unique crystallizing encapsulation polymer in Releasit Encap-HydrOx resists re-soiling. The micro-encapsulated soil particles will not reattach to the carpet fiber. Carpets that are cleaned with Releasit Encap-HydrOx stay clean longer than with traditional detergents.

Releasit Encap-HydrOx dries to a crystallized residue. No rinsing is required. The non-sticky encapsulated residue will not attract more soil. Carpets stay clean longer. Safe for stain-resist, and all synthetic fibers.

Releasit Encap-HydrOx helps reduce contaminants associated with indoor air pollutants.

Releasit Encap-HydrOx also neutralizes many odors naturally.

Releasit Encap-HydrOx has powerful protein spot removal capabilities. Encap-HydrOx removes Blood, Coffee, Chocolate, Red Wine, Urine Stains, Soft Drinks, Food Stains, and more.

Disinfection:

While no method of carpet cleaning can claim to totally disinfect a carpet, it is possible to lower the microbial and viral content.
This document describes the hydrogen peroxide content that is present in Encap-HydrOx: Hydrogen Peroxide Activity

Cleaning Directions:

Shampoo Encap Method:

Mix Encap-HydrOx at 10 oz per gallon of warm or hot water.
Apply with a coarse tip sprayer or with a shower-feed solution tank.
Scrub the carpet thoroughly making overlapping passes with a Cimex, rotary, or cylindrical brush machine.
Rinsing is not required.
Vacuum at the next scheduled vacuuming interval.

Traffic Lane Pre-Spray:

Mix Encap-HydrOx at 12 oz per gallon.
Apply with a pump or battery-powered sprayer using a coarse spray tip.
Apply a heavier amount in more soiled areas.
Allow 5-10 minutes of dwell time.

Hot Water Extraction:

Mix Encap-HydrOx at 1-2 oz per gallon in portable extractors.
For truck-mounts mix 1 quart per 5 gallons of stock solution.

Protein Spot Removal:

Mix 1 part Encap-HydrOx with 3 parts water.
Apply a liberal amount of the spotting mixture to the spot.
Allow 5-10 minutes of dwell time.
Blot with a towel.
Rinsing is not normally required.

Browning Treatment:

Mix Encap-HydrOx at 140ml per Litre.
Spray the affected area thoroughly.
Allow 10 minutes of dwell time.
Clean using minimal moisture, and dry the area quickly!

Upholstery Shampoo:

Mix Encap-HydrOx at 10 oz per gallon of warm or hot water.
Apply evenly using a coarse tip sprayer.
Brush the fabric gently with a horsehair brush or equivalent SOFT bristled brush.
Gently towel off the upholstery or extract with a clear water rinse.

NOTE: Always test for color-fastness in an inconspicuous area if there's any chance of color loss or color migration.

Safety Data Sheet

When to use Encap-HydrOx


Brand:	Foster
Coupler Type:	Quick Disconnect Socket
Maximum Pressure:	5200 psi
Safety Factor:	4:1
Socket Size:	1/4"
Thread Size:	1/4 in (female)
Material:	Brass
O-Ring Material:	Buna-N
Maximum Fluid Temperature:	121 degrees (C)
Country of Origin:	United States

Flo-Thru Brass Quick Connect - ¼" F/F

You might also like

Browsing History