Actichem MethSan Fog Boost Part B 5 ltr

Product Overview

Actichem’s MethSan range is formulated to target the residues left by the manufacture and use of methamphetamine and other clandestine drugs.

Contamination is never uniform. Depending on the ingredients used, the cooking process, how far a room sits from the activity area, and how long that activity went on, a single property can carry a wide range of contamination levels from room to room. The MethSan system is built around that variability rather than assuming one strength suits everything.

What makes the system different is that it does not rely on oxidisers alone. Alongside the oxidising chemistry that breaks down chemical and biological residues, it uses a blend of two ingredients with a strong affinity for the micro-carbon soils produced when hydrocarbons and other chemicals are heated and cooked. That pairing releases and suspends soils that have embedded themselves into paintwork and porous surfaces — which is where meth residue characteristically hides, and why surface wiping alone does not resolve it.

Fog Boost or Foam Boost?

This is the Fog Boost — the Part B formulated for wet or cold fogging application. Choose it when you are treating whole rooms, ceilings, wall surfaces and cavities and you need the chemistry to reach everywhere the residue went. If you need dwell time on vertical surfaces instead, the Foam Boost is the one you want. Many contractors carry both and use them at different stages of the same job.

The MethSan system

MethSan is a multi-part decontamination system, not a single product. The parts are designed to be used together in sequence, and ordering one without the others will leave you unable to complete the method.

Fog Boost or Foam Boost? The choice is about how you are getting the chemistry onto the surface, not about how strong it is. Fog Boost is for fogging or ULV application, where you are treating whole rooms, wall and ceiling surfaces and cavities. Foam Boost is for foam application, where dwell time on vertical surfaces is what you need. Many jobs use both at different stages.

Main wash and decontamination

The main wash has to ensure the residues are either physically removed or chemically deactivated. That is a genuine challenge given the range of chemicals typically involved, the way they deposit onto surfaces, and the variety of substrates in a normal house. Targeted oxidation working in tandem with the micro-carbon residue chemistry is what gives the system its reliability.

What Part B does

Part B is not a diluent and it is not optional. It provides hydrogen peroxide boosting activity, additional wetting properties, and the micro-carbon residue removal chemistry that distinguishes this system. Part A on its own is just peroxide. Part B is what turns it into the MethSan main wash.

Part B comes in two versions, chosen by application method rather than by strength.

MethSan Part B FOG Boost

• Three potentiators that raise the oxidising potential of the Part A solution substantially.
• Carbon residue chasing chemistry releases micro-chemical particles so they can be removed or neutralised by oxidation.
• Formulated for micro-droplet formation — specific solvents ensure the solution atomises properly through a wet or cold fogger, which is what gives coverage and penetration into micro-pores.
• Corrosion inhibitors and pH balance protect your equipment and the customer's surfaces. Fogging equipment is expensive and a poorly buffered solution will eat it.

A note on fogging

Fogging puts a fine aerosol into the air of a sealed space and leaves it suspended. That is the whole point — it is how you reach cavities, ceiling voids and the tops of surfaces you cannot physically wipe. It also means the atmosphere in that room is not one you can be in.

• Do not fog an occupied space. Confirm the property is clear, including pets, before you start.
• Use appropriate respiratory protection for entry and for any work while fog is still airborne. This is the application method with the highest inhalation exposure in the whole system.
• Observe the dwell and re-entry time for the method you are working to. Going back in early to check on things is how technicians get dosed.
• Isopropanol at 10–30% means this concentrate should be kept away from ignition sources, and the fogged atmosphere should not be created near one.

Working to a remediation standard

Methamphetamine decontamination is not a cleaning job with a stronger chemical. It is a remediation process that has to be documented and validated. Chemistry is one input.

• Assess before you treat. Contamination varies enormously between properties, and within a single property, depending on what was cooked or smoked, for how long, where, and how the air moved. Pre-remediation sampling tells you where you actually stand.
• Work to the applicable guideline. Australian remediation work is conducted with reference to the Commonwealth Clandestine Drug Laboratory Remediation Guidelines and the relevant state or territory health department requirements. Confirm the current clearance criteria applying to your job before you quote it.
• Validate afterwards. Post-remediation sampling is what closes the job out. No chemical, including this one, can be claimed to have achieved clearance without it.
• Document everything. Products used, dilutions, methods, dwell times, areas treated, and the sampling results. This is a job that gets reviewed after the fact.

We supply the chemistry. We are not in a position to certify a property, and neither is any product. If you are new to meth remediation, get trained and get an independent sampler involved before you take the work on.

Safety

This listing previously carried no safety information at all. That was an omission on our part and it has been corrected.

Actichem’s safety data sheet for DR636, version 1.1 issued 7 August 2023, classifies MethSan FOG Boost as a hazardous chemical with the signal word DANGER.

• H318 — causes serious eye damage (Serious Eye Damage Category 1)
• H315 — causes skin irritation (Skin Corrosion/Irritation Category 2)
• Not a dangerous good. No poisons schedule.

⚠ H318 — serious eye damage

This is the highest eye classification in the GHS system. It is damage, not irritation — a splash can cause permanent injury. The concentrate is alkaline at pH 10.1, and alkaline eye injuries are characteristically painless at first and progressive, which is why people under-react to them.

Chemical goggles, not safety glasses, whenever the concentrate is decanted, diluted or applied. If it gets in an eye, flush with running water immediately, hold the eyelids apart, and seek medical attention without delay — do not wait to see whether it settles.

⚠ H315 and prolonged contact

Remediation is not a five-minute job. You will be in a contaminated property for hours, repeatedly wetting surfaces overhead. Cumulative contact is what causes the skin problems on these jobs, not a single splash. Wear proper protective clothing and change out of anything that gets soaked.

⚠ Part A and Part B — storage and mixing

This deserves a moment because the safety data sheets read confusingly if you take them in isolation.

• Part A is an oxidiser. Its sheet says to keep it away from reducing agents, acids, alkalis and combustible organic matter.
• Both Part B products are alkaline (pH 10.1 – 10.7) and their sheets say they are incompatible with oxidising agents.

Read literally, each says to keep away from the other. In practice these statements are about bulk storage and uncontrolled mixing, not about the working solution the system is designed around. What that means on the job:

• Store the parts separately. Not on the same pallet, not in the same bund, not stacked on each other in the van.
• Combine only at the point of use, at the dilution and in the order Actichem specifies for the method you are using.
• Use mixed solution promptly and do not keep it. Do not mix a batch today for tomorrow.
• Never seal mixed solution in a closed container. Peroxide solutions decompose slowly and release oxygen. A sealed drum or a capped pump-up left overnight builds pressure. Vent it, or better, do not store it at all.
• Never add anything else — no acids, no chlorine products, no other cleaners. This system is chemistry, and adding a third thing to it is how people get hurt.

Ventilation and personal protective equipment

This product is fogged, which makes respiratory protection the priority rather than an afterthought. Use protection appropriate to the fogging method and the space. Chemical goggles — a fogged atmosphere reaches your eyes whether you splash anything or not. Protective clothing. An eyewash unit should be on site.

First aid

Eyes. Wash out immediately with fresh running water, holding the eyelids apart. Seek medical attention without delay.

Skin. Immediately remove all contaminated clothing. Flush skin and hair with running water.

Swallowed. Rinse the mouth with water. Seek medical advice without delay.

Specifications

Related Products

• MethSan Part A (DR610) — required. This product does nothing without it.
• MethSan PreWash (DR634) — step 1 of the system.
• MethSan Part B Foam Boost (DR638) — the alternative Part B, for foam application.

Safety Data Sheet

Actichem MethSan FOG Boost safety data sheet (DR636, version 1.1, 7 August 2023)

SKU: DR636.05

Setting up for meth remediation for the first time, or unsure which parts of the system your job needs? Call us before you order — a Part B on its own will not complete a remediation.