
Red Relief for Wool offers a safer approach to removing dye stains from wool, at the customer's risk and with their consent. It is a three-part Pro's Choice kit for synthetic food dye stains, such as cordial, fruit punch and sports drinks, in wool carpet and rugs. Pro's Choice note that this includes wool dyed with vegetable dyes. It is made in the USA by Chemical Technologies International (CTI).
Wool is less forgiving than nylon. Pro's Choice say this process needs close attention to detail and patience, and that you should practise on test stains before treating a customer's carpet. For synthetic carpet, the standard Red Relief A&B kit uses a heat-transfer method.
What Is in the Kit
- Part A and Part B: the two halves of the dye remover. Mix them in equal parts to make the ready-to-use solution.
- Part C, CSS: Pro's Choice CSS Colour Stabiliser and Souring Agent. You apply it at the end of the process to neutralise the stain-removal chemistry. CTI's safety data describes its purpose as preventing colour bleed and controlling browning.
Specifications
| Brand | Pro's Choice |
| Manufacturer | Chemical Technologies International Inc. (USA) |
| Type | Three-part food dye stain remover for wool |
| Contents | 3 × 473 mL (A, B and C) |
| Dilution ratio | A and B mixed in equal parts, used as mixed (RTU); CSS diluted 1 part to 3 parts water |
| RTU pH | 6.5 |
| SKU | CS14W |
Directions (Pro's Choice)
- Thoroughly extraction rinse the stained area, then follow with several vacuum-only dry strokes.
- Mix equal portions of solution A and solution B.
- Wet only the stained fibres with the mixed solution.
- Allow up to 10 minutes of dwell time for the stain to disappear or turn light yellow.
- Thoroughly flush and extraction rinse, then follow with vacuum strokes.
- If needed, repeat steps 2 to 5. Pro's Choice allow up to four repeats for severe stains.
- Saturate the area with CSS solution: 1 part CSS to 3 parts water.
- Allow 3 minutes of dwell time.
- Extraction rinse and groom the fibres.
- Dry the area as quickly as possible.
Correction: this page previously showed the standard Red Relief heat-transfer method, which uses a steam iron and treats Red Relief as a two-part product. Pro's Choice's directions for the wool kit use dwell time and repeat applications instead of heat, and finish with CSS. The directions above are Pro's Choice's wool method. Follow the directions on the label of the kit you receive.
Working on Wool
- Test in an inconspicuous area first, and get the customer's consent before you start. The original listing said this, and it still applies.
- Apply to the stained fibres only. Flooding the area spreads chemistry onto dyed fibres that do not need it.
- Be patient with dwell time and repeats rather than adding heat.
- Do not skip the CSS step. It neutralises the stain-removal chemistry, which matters on wool.
- Dry fast. Wool that stays wet is prone to browning.
Safety
Each part has its own Australian safety data sheet issued by Aberford Holdings (importer, trading as Carpet Cleaners Warehouse), linked under Documents below. Read all three before first use. For poisons advice, call 13 11 26.
- Part A: the Australian sheet classifies it as a hazardous chemical: signal word Danger; harmful if swallowed; causes serious eye damage; contact with acids liberates toxic gas. Not dangerous goods. Wear safety goggles and gloves when handling it.
- Part B: the Australian sheet classifies it as a hazardous chemical and dangerous goods: signal word Danger; flammable liquid and vapour; causes serious eye damage; may cause drowsiness or dizziness. Transport: UN 1993, Class 3, Packing Group III. Wear safety goggles and gloves when handling it. Keep it away from heat, sparks and open flames, and use it with ventilation. Avoid breathing dust, mist or vapour.
- Part C (CSS): the Australian sheet classifies it as a hazardous chemical: signal word Warning; causes serious eye irritation. Not dangerous goods. Wear eye protection and gloves when handling it.
- Mix only in a clean container, and do not mix any part with other chemicals.
Frequently Asked Questions
Why is there a third bottle?
Part C is CSS, a colour stabiliser and souring agent. It goes on last, diluted 1:3 with water, to neutralise the stain-removal chemistry before the final rinse.
Can I use a steam iron to speed it up?
Pro's Choice's wool directions do not use heat. They rely on dwell time and repeat applications instead. Part B is also a flammable liquid.
How many times can I repeat the process?
Pro's Choice allow the mix, apply, dwell and rinse steps to be repeated up to four times for severe stains.
Will it remove coffee, tea or wine from wool?
Red Relief for Wool is made for synthetic food dyes. For organic stains such as coffee, tea, wine and urine on wool, see Stain Magic for Wool.
Can I use it on nylon?
For synthetic carpet, the standard Red Relief A&B kit is the usual choice.
Related Products
Documents
- Safety Data Sheet – Pro's Choice Red Relief for Wool Part A (Australian edition, Aberford Holdings, version 1.0, 5 November 2026) (PDF)
- Safety Data Sheet – Pro's Choice Red Relief for Wool Part B (Australian edition, Aberford Holdings, version 1.0, 5 November 2026) (PDF)
- Safety Data Sheet – Pro's Choice Red Relief for Wool Part C (Australian edition, Aberford Holdings, version 1.0, 5 November 2026) (PDF)
- Manufacturer's Safety Data Sheet – Red Relief for Wool Parts A, B and C (Chemical Technologies International, United States edition, revised 13 February 2023) (PDF)
The Australian sheet is prepared by Aberford Holdings from the manufacturer's US edition and reflects Aberford's own classification under the Australian WHS Regulations and the ADG Code. It is reviewed at least every five years, or sooner if the manufacturer revises the source sheet. Labels, specification sheets and cleaning guides are the manufacturer's North American editions and are provided for technical reference.
Working on a wool rug or a natural-fibre carpet you have not treated before? Contact Carpet Cleaners Warehouse with the fibre, dye type and stain before you order.