High Pressure Solution Live Reel Swivel Assembly

Regular price $527.87

SKU:AR34

Product Overview

A live swivel assembly for a high pressure solution hose reel.

A live reel is one you can draw solution through while it is still turning. The swivel is the joint that makes that possible — it carries the solution from the fixed feed line into the rotating drum without leaking and without winding the hose up.

It fits the Space Saver Solution Reel (AR11). Plumbing from the swivel to your truckmount is not included — see "What Else You Need" below.

Important — This Is the High Pressure Version

CCW stocks two live reel swivel assemblies and they are not interchangeable on rating.

Assembly Rating Use
AR34 (this product) 4,000 psi, 250 degrees F High pressure solution lines, including tile and grout work
Low-Pressure Live Reel Swivel Assembly (AR35) Low pressure Fresh water / garden hose reels (primary); low pressure solution reels

Fitting a low pressure swivel to a high pressure line is the mistake worth avoiding. Going the other way is safe but unnecessary.

Construction

  • Smooth-forged brass elbow, so it does not scratch what it touches on the reel
  • Swivel built from stainless steel and nickel-plated brass
  • Shorter profile than most competing assemblies, so it stays out of the way while hose is being reeled in
  • American made

Specifications

Maximum pressure 4,000 psi
Maximum temperature 250 degrees F (approximately 121 degrees C)
Swivel materials Stainless steel and nickel-plated brass
Elbow Smooth-forged brass
Suits Space Saver Solution Reel (AR11)
Plumbing to truckmount Not included

Hydro-Force does not publish the thread sizes for this assembly. Tell us the reel and the line you are fitting it to and we will confirm before you order.

What Else You Need

The swivel only takes care of the reel itself. Additional plumbing — a leader hose and fittings — is required to connect the swivel to your truckmount, and is not included. Tell us your machine and van layout and we will quote the full setup.

Live Reel or Storage Reel

A storage reel holds the hose and nothing else — you unwind what you need and connect it. A live reel is plumbed, so you pull off only the hose you need and leave the rest wound with pressure already through it.

The difference on a job is real: less hose on the client's floor, less to coil at the end, and no connecting and disconnecting at the reel. The swivel is the wearing part of that arrangement, because it is a rotating seal carrying pressurised solution.

Operating Advice

  • A live swivel is a wearing part. Treat a weep at the swivel as a service item, not a fault, and change it before it becomes a leak inside the van.
  • Depressurise before working on it.
  • Keep the reel turning freely. A stiff reel puts side load through the swivel that it was not designed to carry.
  • Do not exceed the rating to gain a little pressure at the tool. The swivel is the component in that line least tolerant of being pushed.

Frequently Asked Questions

What is the difference between this and the AR35?

Pressure rating. This one is rated to 4,000 psi and 250 degrees F. The AR35 is the low pressure version, best suited to fresh water / garden hose reels and also used on low pressure solution reels.

Which reel does it fit?

It is specified for the Space Saver Solution Reel (AR11). For any other reel, tell us which one and we will check.

Is the hose to the truckmount included?

No. Additional plumbing from the swivel to your truckmount is required and sold separately.

Why does a swivel eventually leak?

Because it is a rotating seal carrying pressurised hot solution. Every seal in that duty is a consumable; the question is how long, not whether.

Can I fit it to a low pressure reel?

Yes. A higher rated swivel on a lower pressure line is safe. It is the reverse that causes failures.

Do I need a live reel at all?

Only if you want to draw solution with the hose still on the drum. A storage reel and a normal connection works, it just means handling the whole hose every job.

Related Products

What We See in the Field

The swivel is the part of a van fit-out that gets ignored until it drips on something expensive. It is a rotating seal in a hot pressurised line inside a vehicle, and the sensible position is to carry a spare rather than to find out how long the one on the reel has left.