Actichem Granite Polish is a premium polishing cream made in the USA exclusively for Actichem. Granite Polish is made with the highest-grade crystal abrasive commercially available. Using such high-grade ingredients ensures a consistent finish and deeper shine. Granite Polish is a ready-to-use polishing cream for achieving the final lustre on most granites. Works exceptionally well on darker granites.
Benefits
- Provides superior control during the polishing process. It is not as hot as the lower grades of powder.
- Granite Polish is super easy to work with and exceptionally resistant to orange peeling.
- Zero dust formulation.
- Rinses easily and is ideally suited for both fabrication polishing and floor polishing applications.
-
Leave a micro-coating to resist soiling.
Application areas and surface suitability
Granite Polishing Cream is ideally suited to darker granites and bluestone.
How to use
Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Do not leave unattended on sensitive surfaces.
Dilutions
Mix with water to form a slurry
Application
- Mask and tape off surrounding areas to avoid damage to other substrates.
- Remove all waxes and finishes from the stone surface before first use.
- Apply 30 – 40ml of Granite Polish in the centre of the area being polished.
- Using a slow-speed, heavy-duty machine and a natural pad, work the product over the area being polished. Add more Granite Polish as needed while keeping the cream somewhat thick.
- Work the product in a slow, even, side-to-side motion for about 10 minutes.
- Pull slurry back with a squeegee to determine gloss level.
- Once polished, wet vacuum the area. Rinse well, wet vacuum again, and assess gloss level. If the gloss level is acceptable, move on and repeat the process. Overlap areas to blend.
- When the total area is complete, rinse and wet-vacuum the entire area.
- Once the surface is dry, buff with a white pad to remove any residue.
- Immediately rinse and remove any material splashing out of the work area to prevent etching.
Colour: Grey
pH: 9
Fragrance: None
Dilution: Ready to use (mix with water)
Safety profile: Non-hazardous
Pack sizes: 1qt & 500ml
SKU: AP183
