Concrobium Pro Mold Control

Dual Purpose, Non-toxic Anti-microbial

Concrobium Pro Mold Control offers mould remediation and prevention in a single solution, making it a versatile antimicrobial for restoration pros. The EPA-registered product can be deployed during the “knock down” phases of restoration projects to control mould spore proliferation and can be applied on restored surfaces for ongoing mould protection.

The odourless, category lV solution contains no harmful chemicals and requires no special handling or personal protective equipment. It contains zero VOCs, making it the ideal solution for restoration contractors with customers who are chemically sensitive.

Recommended Uses:

Concrobium Pro Mold Control can be used in homes, businesses, institutions, cottages, RVs, boats – anywhere that mould takes hold.

• Disaster restoration - mould remediation and prevention following flooding and leaks.
• Construction and renovation – pre-treatment of building materials (e.g. drywall, lumber) for mould prevention; elimination of mould found during renovations.
• Speciality mould clean-up and prevention – Cars, RVs, boats, sporting equipment.

Safe for use on virtually any surface (finished and unfinished): drywall, lumber, plaster, concrete, siding, shingles, composite decking, metal, marble, tile, grout, fabric, upholstery, furniture, and clothing.

Safe for use on hard surfaces and fabrics.

Benefits:

• A single solution remediates and prevents mould
• No bleach, ammonia, or VOCs
• EPA-registered for hard surface and fabric applications
• Requires zero isolation time and has no odour
• Can be fogged to treat large and inaccessible spaces
• Ready-to-use solution – no mixing required

Faqs:

Is Concrobium Pro Mold Control EPA-registered?

• Yes, the EPA registration number is 82552-1

   

How can Concrobium Pro Mold Control be used during mould remediation?

• The solution can be used to:
• Reduce environmental spore counts during the remediation process – When fogged, Mold Control can attract particulates in the air and cause them to precipitate, thus cleaning the air (i.e. reducing airborne spore counts).
• Protect restored surfaces against mould growth – Mold Control forms a protective, microscopic coating on surfaces that resists microbial growth. Mould Control is an EPA-registered Fungistat and will stop mould growth.

When in the remediation process can I use Concrobium Pro Mold Control?

• Mould Control can be applied as the very last step in a mould remediation project (for ongoing prevention) and also during the “knock-down” phase to make the indoor environment safer.
• The solution can also be used to treat debris bags and other surfaces where it’s desirable to reduce mould spore counts.

What kind of surface coverage can I expect from Concrobium Pro Mold Control?

• Surface coverage will depend on surface absorbency and application method. Fogging will provide the greatest coverage – 1 gallon (3.8Ltrs) will provide approximately 1,600 sq. ft. (160sqr meters) of coverage (the equivalent of all the walls, ceiling, and floor in a 20’ x 20’ room).
• If using a compression or garden sprayer, a fine mist nozzle should cover approximately 250-500 sq ft (25-50 sqr meters) per 1 gallon (3.8ltr) jug.

How long does Concrobium Pro Mold Control take to dry?

• Drying time depends on humidity levels and temperature in the area as well as the surface to which the solution was applied. Generally, it will dry in less than 2 hours.

Will Concrobium Pro Mold Control freeze?

• Yes, Concrobium Pro Mold Control can freeze in sub-zero temperatures. If it does freeze, the product can still be used after thawing by stirring or shaking.