Nano-Cream is a unique and professionally formulated blend of new nano-colloidal chemistry that works synergistically with water and solvent-based cleaning ingredients. This blend is then boosted with a specialty micro-abrasive. The net result is a powerful all-rounder which delivers startling cleaning performance across a wide range of applications.
| Colour | White/Cream |
| pH | Neutral |
| Safety | Irritant |
| Pack Size | 5lt |
BENEFITS
- Safety First – Whilst Nano-Cream has been formulated to deliver “startling cleaning performance”, the ingredients have also been carefully selected for their low hazard and non-toxic safety profiles.
- Speciality Penetration Feature – The chemistry featured in Nano-Cream has the unique ability to penetrate through the soil or wax film and separate it from the substrate, enabling it to be flushed away.
- Protective Wax Coatings – Nano-Cream is unique in its ability to dissolve and remove porcelain factory-applied wax coatings.
- Grout Haze – With the help of its micro-abrasive content, Nano-Cream effortlessly removes grout haze.
- Fine Stone Compatible – Safe for use on all marble, fine stone, porcelain, and tile.
- Wide Range – Provides outstanding removal of deep-set grime and grease, factory-applied wax on porcelain, and grout haze, removes paint spots, graffiti, bitumen, tar, chewing gum, most cosmetics, and many stains caused by foods.
SUBSTRATES
Safe on all man-made and natural stone, tiles, and grout.
Do not allow Nano-Cream to contact painted surfaces and polymer or wax-coated flooring.
HOW TO USE
Read and understand the Material Safety Data Sheet before use
Always pre-test in an inconspicuous location before use to check for chemical sensitivity.
Floor Surfaces:
No dilution required
- Apply Nano-Cream directly to the affected area.
- Scrub thoroughly using a slow-speed scrubber fitted with an applicable nylon pad or brush.
- Allow 10 to 20 minutes of dwell time for penetration, dissolving, and lifting of oily soils or wax films.
- Scrub and rinse well with clean water or detergent solution.
Vertical Surfaces:
No dilution required
The thickened nature of Nano-Cream means it can be used for removing wax films, grout haze, oil, grease, paint, and graffiti off vertical surfaces.
- Apply directly to the surface or onto a nylon (non-scratch) scouring pad.
- Spread over the surface and agitate.
- Allow 5 to 10 minutes of dwell time.
- Scrub/agitate and rinse well with clean water.
SAFETY
- Not classified as dangerous according to the Australian Dangerous Goods Code for transport.
- Classified as an irritant according to the criteria of Worksafe Australia.
- Observe all safety recommendations made on the product label and MSDS.
