Q.C.T. with OxyBreak™ is a synergistic combination of specialty surfactants, hydrogen peroxide, and D-Limonene that quickly cleans and brightens the grimiest concrete, quarry tile, and ceramic tile and grout floors, fixtures, and walls.
Q.C.T. with OxyBreak™ safely lightens and brightens grout lines without leaving water marks or residue.
You get the advantage of hydrogen peroxide’s brightening power without the problems because it’s stabilized! Add to that the activating and boosting effects that OxyBreak™ has on citrus solvents, and the solution penetrates every crack, crevice, and pore to emulsify and dissolve even the most stubborn soiling and grime.
Q.C.T. with OxyBreak™ brightens grout without attacking and demineralizing unlike harsh acid-based cleaners or chlorine bleach It also self neutralizes so you don’t need to worry about neutralizing the grout lines after cleaning and brightening them.
Q.C.T with OxyBreak™ will work effectively with the hard surface attachments for the RX-20 Rotary Extractor, as well as rotary and stationary hard surface cleaning wands. It also can be safely and effectively used with virtually any hard surface floor cleaning brush or mop system.
- Available Sizes: 3.8ltr
Directions:
- Always pre-test all cleaning solutions in an inconspicuous area for colorfastness prior to application.
- For normal soiling, mix 250ml/Ltr of warm or hot water (1:4) into a professional spray applicator. For heavy soiling, mix 500ml/Ltr of warm or hot water into a professional spray applicator. For application through a standard injection sprayer, mix 950ml of Q.C.T. with Oxybreak and top up with water.
- Apply mixed solution evenly in an overlapping pattern across the surface to be cleaned. You can also apply a mixed solution with a damp mop, sponge, or other professional application equipment. If using a mop for solution application and surface cleaning, change your mop water often to make sure that the soil is not re-deposited.
- Allow the solution to dwell for 2-10 minutes. Agitate grout lines with a grout brush if needed.
- For best cleaning and brightening results, agitate and extract cleaning solution using hot water and an RX20 equipped with hard surface cleaning attachments or a rotary extraction tool. In tight spaces, or on sensitive surfaces and floors with loose grout, use a stationary hard surface cleaning wand or simply mop with rinse water. Rinse the area thoroughly and allow it to dry.
- For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.
- Rinse sprayer used for solution application with water thoroughly after each use.
Information Sheets
Production Information Sheet
Safety Data Sheet
Product Label
