Product Overview
Conquer is a stain remover for carpets and upholstery.
A multi-task spotting solution effective on a wide range of water-based and oily stains, with the added benefit of anti-resoiling encapsulation technology. The Conquer formulation provides serious stain removal properties across a wide scope of stain types, with a particular focus on fibre care and anti-resoiling functionality.
Thanks to the latest in polymer and surfactant technology, Conquer lives up to its name every time.
This is a great replacement for PowerClean PowerSpot.
Why Professionals Choose It
The anti-resoiling encapsulation is the point of difference. Many spotters remove the stain and leave a sticky residue that attracts soil, so the spot reappears as a darker patch within weeks. Conquer’s encapsulating polymers crystallise the residue so it releases at the next vacuum rather than holding dirt. If you have ever been called back to a “returning” stain that was actually resoiling, this is the chemistry that addresses it.
It is also the mildest spotter in our Actichem range — near-neutral pH, no skin or respiratory classification. Where it will do the job, it is the right first choice before reaching for anything stronger.
An On-Sell Opportunity
Conquer is available in a 500 ml consumer pack, which makes it a straightforward add-on sale at the end of a job. Customers get a spotter that will not damage the carpet you have just cleaned or leave a resoiling residue, and you get a product you can stand behind between visits.
How to Use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals and dye stability.
Dilution: ready to use.
Apply to the stain, agitate gently, blot with a clean white towel and allow to dry. Vacuum once dry to lift the encapsulated residue.
Safety
This listing previously described Conquer as “Non-hazardous”. That was not correct, and it has been fixed. The correction is a small one, and we would rather state it plainly than quietly change the page.
Actichem’s safety data sheet for AP462, version 3.3 issued 4 September 2025, classifies Conquer as a HAZARDOUS CHEMICAL under the Model WHS Regulations, on the basis of eye irritation alone. It is not classified as dangerous goods for transport.
- Signal word: WARNING
- H319 — causes serious eye irritation
- pH as supplied: 5.5 – 5.7 per the current SDS — mildly acidic
- HAZCHEM code: not applicable
- Poisons Schedule: not applicable
In practical terms Conquer is a low-hazard product: no skin classification, no respiratory classification, near-neutral pH. The single precaution that matters is eye protection when decanting, mixing or spraying.
We are saying that plainly because a catalogue that treats every product as equally dangerous trains people to ignore all of it. Conquer is genuinely one of the mildest products we sell, and that is useful information when you are choosing between it and something stronger such as Conquer O2 (DANGER, H318) or Bust (DANGER, H314).
Do not mix
Actichem list strong acids and oxidising or reducing agents as materials to avoid. Keep it away from the chlorine range and from concentrated peroxide products.
Personal protective equipment
Safety glasses with side shields or chemical goggles. An eyewash unit is recommended where the product is decanted regularly.
First aid
Eyes. Wash out immediately with fresh running water for 15 minutes, holding the eyelids open. Seek medical attention if irritation persists.
Skin. Wash with soap and water.
Swallowed. Rinse the mouth with water. Do not induce vomiting. Call a Poisons Information Centre or doctor.
Specifications
| Product code | AP462.05 |
| Pack size | 5 litres |
| Product type | Ready-to-use encapsulating spotter for carpets and upholstery |
| Appearance | Actichem’s SDS describes a clear light tan liquid; our records describe it as gold. Both positions are shown rather than averaged. |
| Fragrance | Aviator |
| Dilution | Ready to use |
| pH | Actichem’s current SDS states 5.5 – 5.7. Our earlier records stated 7.5. Both positions are shown; the SDS figure is the one to plan around. |
| Key components | Proprietary surfactant and two proprietary polymers, each under 10% |
| WHS classification | Hazardous chemical — eye irritation only |
| Signal word | WARNING |
| Hazard statements | H319 |
| Dangerous goods | Non-dangerous goods — not regulated for transport |
| HAZCHEM code | Not applicable |
| Poisons schedule | Not applicable |
| SDS referenced | Version 3.3, issued 4 September 2025 |
Related Products
- Actichem Conquer 500 ml spray — the consumer pack, and the on-sell size.
- Actichem Conquer 20 Ltr — bulk for high-volume operators.
- Actichem Conquer O2 — the oxygen version for stains Conquer will not shift. Stronger chemistry and a more serious classification (DANGER, H318); step up to it only when needed.
More Information
Find out what makes Conquer so special
Download our handy spotting guide
Safety Data Sheet
Actichem Conquer Safety Data Sheet — version 3.3, issued 4 September 2025
SKU: AP462.05
Not sure whether you need Conquer or the oxygen-based Conquer O2? Contact Carpet Cleaners Warehouse — the milder product handles most everyday spotting, and it is the cheaper of the two.
