{"product_id":"valve-1200psi-brass-westpak-soft-touch","title":"Soft Touch Brass Wand Valve 1200 PSI","description":"\u003ch2\u003eProduct Overview \u003c\/h2\u003e\n\u003cp\u003eThe Westpak 20-0030 is a forged brass \"Soft Touch\" angled valve fitted to carpet cleaning and truckmount wands.\u003c\/p\u003e\n\u003cp\u003eUnlike a standard ball valve, which snaps open and shut, the Soft Touch valve lets the operator throttle flow smoothly. It is designed for technicians who spend long hours on the tools and want to reduce hand and wrist fatigue during a shift.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Choose It\u003c\/h2\u003e\n\u003cp\u003eSoft touch valves are a frequent topic of discussion among carpet cleaning technicians. Operators consistently report less stress on the wrists, hands and fingers because the valve does not require a hard squeeze to open, and does not slam shut like a standard ball valve. This lower-effort action is associated with reduced fatigue and a lower risk of repetitive strain problems such as carpal tunnel syndrome over a full day of cleaning.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-opening throttle action\u003c\/strong\u003e - the valve opens progressively rather than snapping open, so flow can be adjusted precisely and with less hand force, even above 1000 psi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged brass body\u003c\/strong\u003e - this 20-0030 version is machined from forged brass for strength and long service life under repeated pressure cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel ball and Teflon seat\u003c\/strong\u003e - forms a long-lasting seal that is self-cleaning and self-centering every time the valve closes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-degree angled outlet\u003c\/strong\u003e - removes the need for a separate 30-degree elbow fitting on the solution line, reducing bulk and extra joins at the wand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200 psi rated\u003c\/strong\u003e - rated for standard truckmount and portable extraction pressures. A stainless steel version of this valve (AW792) is rated to 1500 psi where higher pressure capacity is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThis valve is fitted as the flow control\/trigger valve on carpet cleaning wands, including AW29 and some Hydramaster 1.5\" Evolution wands. It is intended as a like-for-like replacement or upgrade for a worn or hard-opening ball valve on a compatible wand.\u003c\/p\u003e\n\u003cp\u003eThis valve can also be found on Wespack, PMF, Kingston, CDI and CMP-branded wands. Wand valve mounting patterns vary between manufacturers, so confirm the mounting pattern and thread size of your existing valve with our team before ordering as a replacement.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible with\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAW29 wands\u003c\/td\u003e\n\u003ctd\u003eDirect fit mounting pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProchem wands\u003c\/td\u003e\n\u003ctd\u003eDirect fit. A retrofit adapter bracket has previously been used to fit Prochem wands not originally drilled for this valve - contact CCW to confirm current availability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF, Kingston, CDI, CMP-pattern wands\u003c\/td\u003e\n\u003ctd\u003eCross-referenced by other distributors as a compatible valve pattern. Confirm mounting pattern before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWestpak AW792 (stainless steel valve)\u003c\/td\u003e\n\u003ctd\u003eSame mounting pattern. Rated to 1500 psi rather than 1200 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVendor\u003c\/td\u003e\n\u003ctd\u003eWestpak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer model\u003c\/td\u003e\n\u003ctd\u003e20-0030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW part number\u003c\/td\u003e\n\u003ctd\u003eAW791\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eForged brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall \/ stem\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003eTeflon, self-cleaning and self-centering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet angle\u003c\/td\u003e\n\u003ctd\u003e30 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum operating pressure\u003c\/td\u003e\n\u003ctd\u003e1200 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve action\u003c\/td\u003e\n\u003ctd\u003eSoft-opening \/ throttling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThread size, inlet\/outlet fitting type are both 1\/4\" Female NPT.\u003c\/p\u003e\n\u003ch2\u003eOperating Advice\u003c\/h2\u003e\n\u003cp\u003eUse the lever to start, stop and throttle solution flow at the wand. The soft-opening design allows flow to be metered gradually, rather than snapping fully open or shut, so use a light, progressive squeeze rather than the full-force action needed on a standard ball valve.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cp\u003eThe self-cleaning, self-centering ball and Teflon seat are designed to maintain a good seal with normal use. Please apply \u003ca rel=\"noopener\" href=\"https:\/\/ccwonline.com.au\/products\/inox-mx6-rubber-grease-tube?_pos=2\u0026amp;_sid=16530d3a8\u0026amp;_ss=r\" target=\"_blank\"\u003erubber grease\u003c\/a\u003e to the o rings on the valve stem every 100 hours.  If the valve begins to leak, stick, or loses its smooth throttling action, the \u003ca rel=\"noopener\" href=\"https:\/\/ccwonline.com.au\/products\/kit-valve-repair-soft-touch?_pos=1\u0026amp;_sid=d689d7476\u0026amp;_ss=r\" target=\"_blank\"\u003eSoft Touch Valve Repair Kit (AW794\u003c\/a\u003e) rebuilds both the brass (AW791) and stainless steel (AW792) versions of this valve.\u003c\/p\u003e\n\u003cp\u003eIf a rebuilt valve continues to leak or will not hold pressure after repair, replacement is generally the more reliable option. As a general rule change the whole valve after re-kitting 3-4 times. \u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this valve fit my wand?\u003c\/h3\u003e\n\u003cp\u003eIt is a direct fit for AW29 and Evolution 1.5\" wands. It is also cross-referenced by other suppliers to PMF, Kingston, CDI and CMP-pattern wands, but mounting patterns differ between brands, so confirm fitment with our team before ordering as a replacement.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the brass and stainless steel versions?\u003c\/h3\u003e\n\u003cp\u003eThe brass AW791 valve is rated to 1200 psi. The stainless steel AW792 version uses the same design but is rated to 1500 psi, which suits higher-pressure or hot water extraction setups.\u003c\/p\u003e\n\u003ch3\u003eWhy does this valve feel different to a standard wand valve?\u003c\/h3\u003e\n\u003cp\u003eStandard wand valves snap fully open or shut with a hard quarter-turn or trigger action. This Soft Touch valve opens progressively, so it can be throttled with less hand force, reducing fatigue over a full day of cleaning.\u003c\/p\u003e\n\u003ch3\u003eCan a worn valve be repaired instead of replaced?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003ca rel=\"noopener\" href=\"https:\/\/ccwonline.com.au\/products\/kit-valve-repair-soft-touch?_pos=1\u0026amp;_sid=19b456780\u0026amp;_ss=r\" target=\"_blank\"\u003eSoft Touch Valve Repair Kit (AW794)\u003c\/a\u003e suits both the brass and stainless steel versions of this valve.\u003c\/p\u003e\n\u003ch3\u003eDo I need a mounting bracket to fit this valve?\u003c\/h3\u003e\n\u003cp\u003eOnly if retrofitting a wand that was not originally drilled for this valve pattern. Contact CCW to confirm current bracket availability for your wand.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/kit-valve-repair-soft-touch\"\u003eSoft Touch Valve Repair Kit (AW794)\u003c\/a\u003e - rebuilds both brass and stainless steel versions of this valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/wand-valve-aw29-251-30\"\u003eWand Valve 251-30 (Kingston pattern)\u003c\/a\u003e - for wands fitted with a Kingston\/CMP-pattern valve rather than a Westpak-pattern valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe Westpak 20-0030 Soft Touch valve is a forged brass, 1200 psi angled control valve built to reduce hand and wrist fatigue on carpet cleaning and truckmount wands. Its self-cleaning stainless steel ball and Teflon seat, 30-degree outlet and progressive throttle action make it a straightforward upgrade or replacement for a worn or hard-opening wand valve on a compatible AW29, Hydramaster Evolution 1.5\" cross-referenced pattern wand.\u003c\/p\u003e","brand":"Westpak","offers":[{"title":"EACH","offer_id":54220187599061,"sku":"AW791","price":95.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/AW791.jpg?v=1783770190","url":"https:\/\/ccwonline.com.au\/products\/valve-1200psi-brass-westpak-soft-touch","provider":"Carpet Cleaners Warehouse","version":"1.0","type":"link"}