{"product_id":"protimeter-mms3-meter-basic-kit","title":"Protimeter MMS3® Basic Kit","description":"\u003ch2\u003eProtimeter MMS3 Basic Kit\u003c\/h2\u003e\u003cp\u003eThe MMS3 is Protimeter's current-generation moisture measurement system: a pin moisture meter, a non-invasive scanner, a thermo-hygrometer and an infrared surface thermometer in one instrument, with Bluetooth logging to the Protimeter Connect app.\u003c\/p\u003e\n\u003cp\u003eThe Basic Kit is the entry point into the MMS3 range. It supplies the instrument, the Quickstick ST humidity sensor and the heavy duty moisture probe in a soft touch pouch. Despite the \"meter only\" description used in some price lists, it is not a bare instrument — it arrives ready to measure moisture, humidity and surface temperature.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMMS3 instrument\u003c\/li\u003e\n\u003cli\u003eQuickstick ST humidity and temperature sensor\u003c\/li\u003e\n\u003cli\u003eHeavy duty moisture probe\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003cli\u003e2 × AA alkaline batteries\u003c\/li\u003e\n\u003cli\u003eCompact soft touch case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho this kit suits\u003c\/h3\u003e\n\u003cp\u003eTechnicians who already own probes and cases from an earlier Protimeter and are replacing the instrument, and buyers who want the lowest-cost route into the MMS3 and will add probes as the work demands them. If you expect the meter to live in a van and take knocks, one of the hard-case kits is the better buy.\u003c\/p\u003e\n\u003ch2\u003eFour instruments in one\u003c\/h2\u003e\n\u003ch3\u003ePin mode\u003c\/h3\u003e\n\u003cp\u003eMeasures moisture where the pins make contact. Use it to quantify how far moisture has travelled and to track a structure drying out day by day. Built-in pins for surface work, or plug in the heavy duty probe, deep wall probes or a hammer electrode to read at depth.\u003c\/p\u003e\n\u003ch3\u003eNon-invasive scan mode\u003c\/h3\u003e\n\u003cp\u003eReads below the surface without marking it, using radio frequency. Standard mode reads to about 19 mm; sensitivity mode reads to about 12 cm. Use it to map the extent of a problem before deciding where to put pins. Surface moisture does not distort the reading.\u003c\/p\u003e\n\u003cp\u003eMetal in the substrate — reinforcing mesh, foil-backed insulation, metal lath — produces false high readings. Confirm anything unexpected in pin mode.\u003c\/p\u003e\n\u003ch3\u003eHygrometry\u003c\/h3\u003e\n\u003cp\u003eWith a Hygrostick or Quickstick fitted, the MMS3 measures relative humidity, air temperature, dew point, specific humidity and vapour pressure. This is the mode used to verify dehumidifier performance, to test equilibrium relative humidity in concrete slabs, and to establish whether conditions favour mould growth.\u003c\/p\u003e\n\u003ch3\u003eInfrared surface temperature\u003c\/h3\u003e\n\u003cp\u003eA non-contact laser thermometer reads surface temperature and compares it against dew point, so you can identify surfaces at risk of condensation without touching them.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWater damage restoration — establishing the extent of intrusion, then documenting the drying curve\u003c\/li\u003e\n\u003cli\u003eBuilding inspection and pre-purchase survey\u003c\/li\u003e\n\u003cli\u003eConcrete slab moisture testing, including in-situ relative humidity\u003c\/li\u003e\n\u003cli\u003eTimber and timber flooring, with calibration scales for 150 species\u003c\/li\u003e\n\u003cli\u003eMould investigation and indoor air quality assessment\u003c\/li\u003e\n\u003cli\u003eInsurance assessment, where a defensible record of readings matters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich MMS3 kit should you buy?\u003c\/h2\u003e\n\u003cp\u003eEvery kit contains the same MMS3 instrument. The difference is which probes and sensors are packed with it, and whether it ships in a soft pouch or a hard case. Buying the right kit is cheaper than buying the meter twice.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003cth\u003eBasic (BLD9800)\u003c\/th\u003e\n\u003cth\u003eStandard (BLD9800-C)\u003c\/th\u003e\n\u003cth\u003eSurvey in Case (BLD9800-C-S)\u003c\/th\u003e\n\u003cth\u003eRestoration (BLD9800-C-R)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMMS3 instrument\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuickstick ST humidity sensor\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeavy duty moisture probe\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHygrostick with extension lead\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e127 mm deep wall probes\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeavy duty hammer electrode\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug-in surface temperature sensor\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuick start guide\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase\u003c\/th\u003e\n\u003ctd\u003eSoft touch pouch\u003c\/td\u003e\n\u003ctd\u003eHard plastic case\u003c\/td\u003e\n\u003ctd\u003eHard plastic case\u003c\/td\u003e\n\u003ctd\u003eHard plastic case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-mms3-standard-kit\"\u003eMMS3 Standard Kit\u003c\/a\u003e — the Basic Kit in a hard case\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-mms3-survey-kit\"\u003eMMS3 Survey Kit in Case\u003c\/a\u003e — the most complete kit for building survey and concrete work\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-mms3-restoration-kit\"\u003eMMS3 Restoration Kit\u003c\/a\u003e — adds the hammer electrode for reading at depth in timber\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePin moisture range\u003c\/th\u003e\n\u003ctd\u003e6% to 100% WME (readings above 30% are relative)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePin measurement depth\u003c\/th\u003e\n\u003ctd\u003eUp to 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNon-invasive range\u003c\/th\u003e\n\u003ctd\u003e60 to 999 relative. Up to 19 mm in standard mode, up to 12 cm in sensitivity mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInfrared surface temperature\u003c\/th\u003e\n\u003ctd\u003e−20°C to 80°C, accuracy ±2°C. Laser pointer, 12:1 distance-to-spot ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHumidity – with Hygrostick\u003c\/th\u003e\n\u003ctd\u003e30–40% RH ±3% at 20°C; 41–98% RH ±2% at 20°C. Air temperature −10°C to 50°C ±0.3°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHumidity – with Quickstick ST\u003c\/th\u003e\n\u003ctd\u003e0–10% RH ±3% at 25°C; 10–70% ±2%; 70–99% ±3%. Air temperature 0°C to 50°C ±0.5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug-in surface temperature probe\u003c\/th\u003e\n\u003ctd\u003eBLD5808. Range 0°C to 70°C, accuracy ±0.7°C at 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData storage\u003c\/th\u003e\n\u003ctd\u003e10,000 readings on the instrument\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eBluetooth to the Protimeter Connect app (iOS and Android)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e2.4″ TFT colour LCD, 320 × 240, adjustable backlight with outdoor mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBatteries\u003c\/th\u003e\n\u003ctd\u003e2 × AA alkaline, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGross weight\u003c\/th\u003e\n\u003ctd\u003e309 g (instrument with batteries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory compliance\u003c\/th\u003e\n\u003ctd\u003eCE, RoHS, ETL, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e24 months on the instrument. Excludes wear on accessories and consumables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatible probes and sensors\u003c\/h2\u003e\n\u003cp\u003eEvery accessory below is confirmed by Protimeter as fitting the MMS range.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-heavy-duty-hammer-electrode-probe\"\u003eHeavy duty hammer electrode (BLD5055)\u003c\/a\u003e — drives insulated pins into hardwood, joists and structural timber\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-deep-wall-probes-5inch-127mm\"\u003eDeep wall probes 127 mm (BLD5018)\u003c\/a\u003e — reads inside wall cavities and insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-hd-2-pin-moisture-probe-inc-cap\"\u003eHeavy duty moisture probe (BLD5060)\u003c\/a\u003e — the standard plug-in probe for hard-to-reach areas\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/protimeter-2-pin-moisture-probe-and-lead\"\u003eMini extension pin probe (BLD5079)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-blade-type-baseboard-moisture-probe\"\u003eBaseboard probe (BLD5025)\u003c\/a\u003e — reads behind skirting without removing it\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/protimeter-eifs-probe-inc-100mm-pins\"\u003eEIFS probe (BLD5070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-single-replacement-hygrostick-pol4750\"\u003eHygrostick humidity sensor (POL4750)\u003c\/a\u003e — for high humidity and harsh environments, 30–98% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-quickstick-st-1-100-rh-pol8751\"\u003eShort Quickstick ST sensor (POL8751)\u003c\/a\u003e — faster response, full 0–99% RH range\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/protimeter-surface-temperature-sensor-bld5808\"\u003ePlug-in surface temperature sensor (BLD5808)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/protimeter-humidity-box-for-use-with-protimeter-mms-and-hygromaster\"\u003eHumidity box (BLD4711)\u003c\/a\u003e — surface equilibrium RH on concrete floors\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/protimeter-calibration-device-bld5086\"\u003eCalcheck calibration check device (BLD5086)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant — two part numbers that are easily confused\u003c\/h3\u003e\n\u003cp\u003eThe plug-in surface temperature sensor is \u003cstrong\u003eBLD5808\u003c\/strong\u003e. \u003ca href=\"\/products\/protimeter-extension-lead-mini-hygrostick\"\u003eBLD5806\u003c\/a\u003e is the extension lead for mini Hygrosticks and is not a temperature probe. Ordering BLD5806 expecting a temperature sensor is a common mistake.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the MMS3 replace the MMS2?\u003c\/h3\u003e\n\u003cp\u003eYes. The MMS3 is the current generation. It adds Bluetooth and the Protimeter Connect app, on-board storage for 10,000 readings, a colour display and a deeper non-invasive sensitivity mode. MMS2 accessories carry across — probes, Hygrosticks, Quicksticks and leads are shared between the two generations.\u003c\/p\u003e\n\u003ch3\u003eCan I test concrete slabs to ASTM F2170 with this?\u003c\/h3\u003e\n\u003cp\u003eThe MMS3 performs the measurement, but in-situ relative humidity testing also needs sleeves, a drill bit and a hole brush. Those are supplied in the flooring accessory range rather than in these kits.\u003c\/p\u003e\n\u003ch3\u003eWhich humidity sensor should I use?\u003c\/h3\u003e\n\u003cp\u003eThe Quickstick ST responds faster and covers the full 0–99% RH range, which suits general restoration work. The Hygrostick is the choice for sustained high humidity and harsh conditions such as equilibrium RH in concrete, where it operates between 30% and 98% RH. Both are replaceable and both are consumable — they drift with age and exposure.\u003c\/p\u003e\n\u003ch3\u003eHow often should it be calibrated?\u003c\/h3\u003e\n\u003cp\u003ePin mode can be checked in the field at any time with the Calcheck device (BLD5086). For a documented conformance certificate, twelve months is a sensible starting interval, adjusted to your own work environment and quality procedures. Certification is available in Australia.\u003c\/p\u003e\n\u003ch3\u003eWhy does the scan mode read high on a wall that feels dry?\u003c\/h3\u003e\n\u003cp\u003eNon-invasive mode responds to anything conductive behind the surface, not only water. Reinforcing mesh, foil-backed insulation, metal lath, pipework and wiring all produce false highs. Confirm with pins before recording a reading.\u003c\/p\u003e\n\u003ch3\u003eAre readings above 30% WME accurate?\u003c\/h3\u003e\n\u003cp\u003eNo, and Protimeter says so plainly. Above roughly 30% the pin scale becomes relative rather than absolute. It still tells you the material is wet and still tracks the direction of drying, which is what matters on a restoration job.\u003c\/p\u003e\u003ch2\u003eCare and maintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRefit the pin cap after every use. Bent or broken pins are the most common cause of an instrument coming in for repair, and the cap is a low-cost replaceable part\u003c\/li\u003e\n\u003cli\u003eCheck pin mode against the Calcheck device before any job where the reading will be reported to a third party\u003c\/li\u003e\n\u003cli\u003eTreat humidity sensors as consumables. Replace rather than attempt to recalibrate them\u003c\/li\u003e\n\u003cli\u003eRemove the batteries if the instrument is going into storage for an extended period\u003c\/li\u003e\n\u003cli\u003eClean pins with a dry cloth. Do not immerse the instrument or use solvents on the display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Protimeter_MMS3_BLD9800_Manual_2024-09.pdf\"\u003eMMS3 instruction manual (INS9800 Rev B, September 2024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Protimeter_MMS3_BLD9800_Spec_2024-09.pdf\"\u003eMMS3 datasheet (AAS-920-791F, September 2024)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Protimeter_MMS3_Connect_App_BLD9800_Spec.pdf\"\u003eProtimeter Connect app guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Protimeter_Wood_Calibration_Tables_INS003_Spec_2014-12.pdf\"\u003eWood calibration tables (INS003 Rev C) – 150 timber species\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\n\u003cp\u003eNot sure which kit or which sensor suits the work you do? Contact Carpet Cleaners Warehouse before ordering and we will help you select the right configuration the first time.\u003c\/p\u003e","brand":"Protimeter","offers":[{"title":"EACH","offer_id":54859227791573,"sku":"GEPBLD9800","price":2112.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/GEPBLD9800.png?v=1788841499","url":"https:\/\/ccwonline.com.au\/products\/protimeter-mms3-meter-basic-kit","provider":"Carpet Cleaners Warehouse","version":"1.0","type":"link"}