FabriCap Ultra is a unique upholstery cleaning detergent which is based on proprietary technology to provide a total solution to upholstery, delicate fabric and rug cleaning. This innovative multi-task product can be used in one of three ways:
- Encapsulation Cleaning – for upholstery fabrics and delicate area rugs, a 1:16 solution of FabriCap Ultra is spray applied, agitated and allowed to dry.
- Low Moisture (Dry) Cleaning – for delicate cottons, a 1:4 solution of FabriCap Ultra is whipped up to produce a rich foam which is then used to dry-clean the cotton fabric.
- Wet Cleaning Delicate Fabrics – for water cleanable fine fabrics, a 1:16 solution of FabriCap Ultra is spray applied, agitated and rinse/extracted with Clean Rinse.
| Colour | Light tan |
| pH | 6.0 - 6.5 RTU |
| Fragrance | Fresh floral |
| Dilution | 1:16 |
| Safety | Non-Hazardous |
| Pack Size | 5Lt, 20Lt, 200Lt |
BENEFITS
Encapsulating – an advanced blend of high performance embritteling and encapsulation agents encapsulate the emulsified soil, embritteling it for easy vacuum removal.
Releases Upholstery Soiling – FabriCap Ultra contains ingredients which specifically target body oils and fats, beverage and food stains and organic soils.
Dye and Fabric Stability – the mildly acidic character of FabriCap Ultra helps prevent cellulosic browning and stabilizes fibre dyes.
Leaving Fabrics Chemical Free – FabriCap Ultra residues left in the upholstery or rug fibres dry down to a light, brittle crystal which quickly breaks away from the fibre and is left chemical free.
No Resoiling – FabriCap Ultra’s unique embritteling and anti-resoiling polymer ensure that fabrics and fibres stay cleaner for longer.
Fibre Safe – safe for use on all water cleanable fibres including silk, cotton, linen, wool, stain-resistant nylon and all synthetic fibres.
User Friendly – low odour formula – pleasant to use.
What is the difference between FabriCap Ultra and a carpet encapsulating cleaner?
Upholstery Special shares a number of similarities with a carpet encapsulating cleaner but with a few critical differences -
- FabriCap Ultra has a mildly acidic pH which stabilizes dyes and helps prevent browning.
- The cleaning ingredients chosen for FabriCap Ultra specifically target the oily, greasy soiling typical to upholstery.
- Specialty stain removal agents are included to assist with the removal of beverage, and tannin staining.
HOW TO USE
Delicate Area Rugs – delicate area rugs which are water-cleanable can be cleaned using encapsulation cleaning or the wet cleaning method.
Delicate Cotton Fabrics – these are best cleaned used the Low Moisture (Dry) Cleaning Method.
Fine Fabrics – upholstery which is water cleanable is best cleaned using the Wet Cleaning Method or the Encapsulation Method.
Note: If the fabric or rug is to be protected using a fluorochemical protector the treated area must be extract/rinsed.
Directions
Always pretest in an inconspicuous location for substrate sensitivity to chemicals.
HOW TO USE
Delicate Area Rugs – delicate area rugs which are water-cleanable can be cleaned using encapsulation cleaning or the wet cleaning method.
Delicate Cotton Fabrics – these are best cleaned used the Low Moisture (Dry) Cleaning Method.
Fine Fabrics – upholstery which is water cleanable is best cleaned using the Wet Cleaning Method or the Encapsulation Method.
Note: If the fabric or rug is to be protected using a fluorochemical protector the treated area must be extract/rinsed.
Directions
Always pretest in an inconspicuous location for substrate sensitivity to chemicals.
Encapsulation Cleaning
- 1. Vacuum fabric to remove all loose soil.
- 2. Mix 250ml FabriCap Ultra with 4 Litres clean water.
- 3. Spray apply this solution onto the fabric until it is wetted out. (1 litre of ready to use solution should cover approximately a 4 seater lounge suite.)
- 4. Agitate solution using a bonnet mitt or an upholstery cleaning brush.
- 5. Remove excess moisture with a clean, white, dry terry towel.
- 6. Allow to dry. Assist drying by increasing ventilation.
- 7. Leave to dry for at least 24 hours before dry vacuuming to remove dry, embrittled soil.
Low Moisture (Dry) Cleaning
- 1. Vacuum fabric to remove all loose soil.
- 2. Mix 250ml FabriCap Ultra with 1 litre clean water.
- 3. Whip-up solution to create a rich foam
- 4. Apply this foam onto the fabric using a sea sponge, bonnet mitt or upholstery cleaning brush. Agitate to remove maximum amount of soiling.
- 5. Remove excess foam and moisture with a clean, white, dry terry towel.
- 6. Allow to dry. Assist drying by increasing ventilation.
- 7. Leave to dry for at least 24 hours before dry vacuuming to remove dry, embrittled soil.
Wet Cleaning Delicate Fabrics
- 1. Vacuum fabric or rug to remove all loose soil.
- 2. Mix 250ml FabriCap Ultra with 4 Litres clean water.
- 3. Spray apply this solution onto the fabric until it is wetted out. (1 litre of ready to use solution should cover approximately a 4 seater lounge suit or 4m2)
- 4. Agitate solution using a bonnet mitt or an upholstery cleaning brush.
- 5. Rinse extract using Powerclean Clean Rinse.
- 6. Allow to dry. Assist drying by increasing ventilation.
