Regular price $13,903.03

PHOENIX D850 PORTABLE DESICCANT SERIES

Low Grains, Wide Operating Range

The Phoenix D850 provides the perfect blend of portability, versatility, and performance the restoration industry has been seeking in a medium-capacity desiccant dehumidifier.

  • The included remote humidistat and process blower speed control allow you to tailor the drying to the task at hand.

  • Wide operating range and ultra-low grain depression.

  • The D850 operates both vertically or horizontally and is perfect for low clearance applications

The Phoenix D850 combines the wide operating range and ultra-low grains of all of the Phoenix desiccants with the portability of an LGR like our Phoenix 250 Max. The included remote humidistat and process blower speed control allow you to tailor the drying to the task at hand. The D850 operates both vertically or horizontally and is perfect for low clearance applications, fitting inside most crawlspaces. The lower carrying handle makes moving the unit down stairs, as well as into and out of a crawlspace, a breeze.

The Phoenix D850 delivers up to 850 CFM of ultra-low grain process air and removes a stunning 175 liters per day at AHAM conditions. The true four-hole design* allows for positive, neutral, or negative pressurization of the affected area. Three-hole desiccants** inherently pull unaffected and/or outside air into the drying chamber.

Power to the unit is provided by either a 30- or 50- amp, grounded power cord (both are included). The reactivation air stream is ducted through 6” flex duct, which is also provided with the unit.Power to the unit is provided by either a 30- or 50- amp, grounded power cord (both are included). The reactivation air stream is ducted through 6” flex duct, which is also provided with the unit.

* Having completely separate process and regeneration airstreams.
** Where regeneration airstream is pulled from the process airstream.

PRODUCT SPECIFICATIONS

Part Numbers: 4034000
Power: 208-240 VAC, 50/60 Hz, Single Phase
30A or 50A Branch Circuit Protection
(24A or 40A Actual Amp Draw)
Water Removal: 175 Liters (370 Pints)/Day @ AHAM (26.7°C, 60%)
CFM: 1,440 m3/hr (850 CFM)
Filter: Pleated 20” x 20” x 2” Media MERV 11 (Process)
Pleated 9” x 11 3⁄8” x 13⁄4” Media MERV 11
Ducting Options: Process Inlet: 18” or 12” Flex-Duct (Optional)
Process Outlet: 10” Lay-Flat Collar (Optional)
Reactivation Inlet: 6” Flex-Duct (Optional)
Reactivation Outlet: 6” Flex-Duct (Required)
Cord Length: 1 cord either for 30 Amp operation or 50 Amp
Unit Dimensions: 51 cm x 104 cm x 66 cm
Operating Range: -23°C to 49°C


PRODUCT DOWNLOADS

pdfPhoenix D850 International Spec Sheet

pdfPhoenix D850 International Manual

pdfDesiccant Specification Chart