PHOENIX D385 PORTABLE DESICCANT SERIES
Low Price, High Performance
The Phoenix D385 provides the perfect combination of features and performance for the restoration professionals.
Ingeniously designed to operate vertically or horizontally.
Wide operating range and ultra-low grain depression.
Four hole design allows for effective positive, neutral or negative pressure operation
Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs.
The Phoenix D385 is not like the “toy” portable desiccant dehumidifiers that lack real capacity. The D385 delivers 320 CFM (544 m3/hr) of ultra-low grain process air. The true four hole configuration allows the Phoenix D385 to be located in the affected area with the 60 CFM (102 m3/hr) re-activation air stream isolated from the drying chamber. The D385’s four hole design allows the restoration contractor to set-up for effective positive, neutral or negative pressure operation.
Designed to operate vertically or horizontally, the D385 will fit inside most crawlspaces. Having the D385 securely inside, rather than outside the crawlspace access, avoids the possibility of someone tampering with the unit.
The Phoenix D385 is easy to transport and set-up. The D385 will fit on your truck in the areas already designed for your LGRs and will move on to the jobsite with the same portability. All the power to the unit is provided by two 230 volt grounded power cords. Simply plug the cords into separate 10 amp outlets. Each cord draws only 5.5 amps to power the D385. The re-activation air stream is ducted through 6” (15.25cm) flex duct provided with the unit and stores conveniently in the top of the unit.
The Phoenix D385 makes it possible for every restoration contractor to add the ultra-low grain performance of a desiccant with real water removal capacity to their equipment fleet.
Features of the Phoenix D385
- Operates vertically or horizontally
- Wide operating range
- Process airflow 320 CFM (544 m3/hr)
- Reactivation airflow 60 CFM (102 m3/hr)
- 55L (116 pints) water removal per day at AHAM
- Ultra low grains
- Two 7 meter (23’) power cords: Each 230-240/50 Hz, 5.5 Amps per cord, 11 Amps/230 Volts total
- Unlimited ducting possibilities
- Legendary stainless construction