CONCROBIUM MOULD STAIN REMOVER (A+B) 1.18KG PER 2PACK

Regular price $156.18 - $195.23

Buy In Bulk & Save!

Qty Price
inc GST
Discount
1 - 3 $195.23 Each 0% Off
4 - 7 $185.47 Each 5% Off
8 - 15 $175.71 Each 10% Off
16 - 143 $165.95 Each 15% Off
144 - + $156.18 Each 20% Off

Concrobium Mould Stain Remover (A+B) 1.18Kg Per 2Pack

MOULD STAIN REMOVER BY CONCROBIUM

Eradicate Mould Staining with Less Labor

Concrobium Mould Stain Remover delivers exceptional mould stain removal with no brushing, sanding or blasting. That helps professional restoration contractors reduce labour costs and complete jobs more quickly. The unique solution can be applied with any standard sprayer, so mould stain removal projects can be completed without the capital equipment investments and operating expenses associated with dry ice and soda blasting techniques.

The proprietary solution employs liquid oxidative technology to facilitate physical mould removal, but it contains none of the harsh chemicals associated with traditional oxidation products. The 2013 Liquid Tri-Phasic Mould Stain Remediation study provides scientific proof that Concrobium Mould Stain Remover physically removes mould as well as, or better than traditional abrasive techniques, at a fraction of the labour investment.

Directions for Use

1. Pour 1.2 gallons (4.7) of warm water (80-100F or 27-38C) into a bucket or other open vessel. Water temperature outside this range may reduce product effectiveness.

2. Add entire contents of Part 1 of 2 and Part 2 of 2 to the bucket and stir solution with mixing stick until dissolved. IMPORTANT: mix well to ensure the contents of both containers are dissolved. Do not seal the bucket while mixing. The properly mixed solution may not be completely clear.

3. WAIT AT LEAST 30MINS FROM INITIAL MIXING, stirring occasionally to dissolve all crystals, and then apply to the target area using an electric or manual pump sprayer. Note: Product efficacy may be diminished if applied in temperatures below 50F or 10C.

4. For best results, apply liberally and maximize surface dwell time. To avoid drying, apply in smaller sections and/or reapply the product as required. For heavy mould staining ensure the surface remains wetted out for up to 1 hour.

PRODUCT MUST BE APPLIED WITHIN 2 HOURS OF INITIAL MIXING or efficiency will be diminished. This product has a characteristic pungent odor that will dissipate overnight. A second application and/or some light scrubbing may be needed for surfaces with heavy mold staining. this product is not a registered antimicrobial. Use concrobium mold control prior to and after application of this product to eliminate mold spores and odors and to prevent regrowth.