Hardwood Preservation Finish (Satin) is designed to be used as a preservation finish over an existing urethane finish over a hardwood floor.
- It is a low-solid blend of urethane and acrylic so that it can be easily applied over a urethane finish after a thorough cleaning and a properly prepared base finish. The base finish can be prepared by the extraction or abrasive cleaning method.
- This preservation finish serves as the wear coat and protects the original finish of the floor. Apply the finish immediately after the extraction cleaning system is finished.
- A second coat of finish is optional for the extraction cleaning system.
- Apply the finish about an hour after the abrasion cleaning system is completed. The abrasion cleaning system leaves the hardwood floor damp making it necessary for a dry time of about an hour. A second coat of finish is necessary for the abrasion cleaning system.
To apply, use terry cloth covers and a finish applicator. Once a floor has dried naturally for approximately 45 minutes, a second coat of finish is then applied and also allowed to dry naturally. The end result is a clean, refinished, and rejuvenated wood floor and a happy customer.
Dilution Ratios: RTU RTU pH: 7.8 Contains: 3.78ltrs
|Unit Of Measure||1Gal|