{"product_id":"actichem-methsan-part-a-20-ltr","title":"Actichem MethSan Part A 20 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s MethSan range is formulated to target the residues left by the manufacture and use of methamphetamine and other clandestine drugs.\u003c\/p\u003e\n\u003cp\u003eContamination is never uniform. Depending on the ingredients used, the cooking process, how far a room sits from the activity area, and how long that activity went on, a single property can carry a wide range of contamination levels from room to room. The MethSan system is built around that variability rather than assuming one strength suits everything.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes the system different\u003c\/strong\u003e is that it does not rely on oxidisers alone. Alongside the oxidising chemistry that breaks down chemical and biological residues, it uses a blend of two ingredients with a strong affinity for the \u003cstrong\u003emicro-carbon soils\u003c\/strong\u003e produced when hydrocarbons and other chemicals are heated and cooked. That pairing releases and suspends soils that have embedded themselves into paintwork and porous surfaces — which is where meth residue characteristically hides, and why surface wiping alone does not resolve it.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e20 litre\u003c\/strong\u003e bulk pack, for contractors doing remediation work regularly. \u003cstrong\u003eRead the shelf life note below before buying at this size\u003c\/strong\u003e — peroxide loses activity in storage, so 20 litres is the right buy if you will use it, and the wrong buy if it will sit. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-part-a-5-ltr\"\u003e5 litre\u003c\/a\u003e suits a single property.\u003c\/p\u003e\n\u003ch2\u003eThe MethSan system\u003c\/h2\u003e\n\u003cp\u003eMethSan is a \u003cstrong\u003emulti-part decontamination system\u003c\/strong\u003e, not a single product. The parts are designed to be used together in sequence, and ordering one without the others will leave you unable to complete the method.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStep 1 — Prewash\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-prewash-5-ltr\"\u003eMethSan PreWash\u003c\/a\u003e (DR634)\u003c\/td\u003e\n\u003ctd\u003eAlkaline prewash that lifts the surface soil, films and hydrocarbon residue so the main wash can reach the substrate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStep 2 — Main wash, Part A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-part-a-5-ltr\"\u003eMethSan Part A\u003c\/a\u003e (DR610)\u003c\/td\u003e\n\u003ctd\u003ePotentiated hydrogen peroxide. The oxidising half of the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStep 2 — Main wash, Part B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-fog-boost-part-b-5-ltr\"\u003eFog Boost\u003c\/a\u003e (DR636) or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-foam-boost-part-b-5-ltr\"\u003eFoam Boost\u003c\/a\u003e (DR638)\u003c\/td\u003e\n\u003ctd\u003eThe boost partner, chosen by application method — fogging or foam application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFog Boost or Foam Boost?\u003c\/strong\u003e The choice is about how you are getting the chemistry onto the surface, not about how strong it is. \u003cstrong\u003eFog Boost\u003c\/strong\u003e is for fogging or ULV application, where you are treating whole rooms, wall and ceiling surfaces and cavities. \u003cstrong\u003eFoam Boost\u003c\/strong\u003e is for foam application, where dwell time on vertical surfaces is what you need. Many jobs use both at different stages.\u003c\/p\u003e\n\u003ch2\u003eMethSan Part A\u003c\/h2\u003e\n\u003cp\u003ePart A is the oxidising half of the main wash.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePotentiated hydrogen peroxide\u003c\/strong\u003e — a peroxide blend formulated to enhance its oxidising activity well beyond what the peroxide concentration alone would suggest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper wetting agents\u003c\/strong\u003e — rapid penetration into porous surfaces, which is where the residue is.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaks down organic residues\u003c\/strong\u003e including bacterial and mould contamination commonly present in these properties alongside the drug residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on what we do and do not claim.\u003c\/strong\u003e This listing previously described Part A as providing “powerful complementary anti-microbial action tackling bacteria, viruses and mould”. \u003cstrong\u003eWe have removed that wording.\u003c\/strong\u003e Terms like antimicrobial, sanitiser and disinfectant are regulated in Australia, and we can find no ARTG or APVMA listing for this product. Hydrogen peroxide is a genuine and effective oxidiser against organic contamination — that much is chemistry — but we are not prepared to make a regulated efficacy claim we cannot evidence. We have asked Actichem whether a listing exists. If one does, we will say so and quote the number.\u003c\/p\u003e\n\u003ch2\u003eMain wash and decontamination\u003c\/h2\u003e\n\u003cp\u003eThe main wash has to ensure the residues are either physically removed or chemically deactivated. That is a genuine challenge given the range of chemicals typically involved, the way they deposit onto surfaces, and the variety of substrates in a normal house. Targeted oxidation working in tandem with the micro-carbon residue chemistry is what gives the system its reliability.\u003c\/p\u003e\n\u003ch2\u003eWorking to a remediation standard\u003c\/h2\u003e\n\u003cp\u003eMethamphetamine decontamination is not a cleaning job with a stronger chemical. It is a \u003cstrong\u003eremediation process that has to be documented and validated.\u003c\/strong\u003e Chemistry is one input.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssess before you treat.\u003c\/strong\u003e Contamination varies enormously between properties, and within a single property, depending on what was cooked or smoked, for how long, where, and how the air moved. Pre-remediation sampling tells you where you actually stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork to the applicable guideline.\u003c\/strong\u003e Australian remediation work is conducted with reference to the Commonwealth \u003cem\u003eClandestine Drug Laboratory Remediation Guidelines\u003c\/em\u003e and the relevant state or territory health department requirements. Confirm the current clearance criteria applying to your job before you quote it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidate afterwards.\u003c\/strong\u003e Post-remediation sampling is what closes the job out. \u003cstrong\u003eNo chemical, including this one, can be claimed to have achieved clearance without it.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument everything.\u003c\/strong\u003e Products used, dilutions, methods, dwell times, areas treated, and the sampling results. This is a job that gets reviewed after the fact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe supply the chemistry. \u003cstrong\u003eWe are not in a position to certify a property, and neither is any product.\u003c\/strong\u003e If you are new to meth remediation, get trained and get an independent sampler involved before you take the work on.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously carried no safety information at all.\u003c\/strong\u003e That was an omission on our part and it has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for DR610, version 1.1 issued 9 August 2023, classifies MethSan Part A as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eWARNING\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH319\u003c\/strong\u003e — causes serious eye irritation (Eye Irritation Category 2)\u003c\/li\u003e\n\u003cli\u003eNot a dangerous good. No poisons schedule. HAZCHEM \u003cstrong\u003e2P\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIn fairness to the product, Part A is the milder half of this system.\u003c\/strong\u003e One hazard statement, near-neutral at pH 6.2, and hydrogen peroxide below 8%. The Prewash and both Part B boosters are classified DANGER with serious eye damage. If you are setting up your PPE for a MethSan job, \u003cstrong\u003eset it for the worst product in the kit, not this one.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe practical risk with Part A is that it is commonly \u003cstrong\u003efogged or sprayed\u003c\/strong\u003e, often overhead, in an enclosed space you have deliberately sealed. Chemical goggles rather than safety glasses, and appropriate respiratory protection for the application method. An eyewash unit should be on site.\u003c\/p\u003e\n\u003ch3\u003e⚠ Part A and Part B — storage and mixing\u003c\/h3\u003e\n\u003cp\u003eThis deserves a moment because the safety data sheets read confusingly if you take them in isolation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart A is an oxidiser.\u003c\/strong\u003e Its sheet says to keep it away from reducing agents, acids, \u003cstrong\u003ealkalis\u003c\/strong\u003e and combustible organic matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth Part B products are alkaline\u003c\/strong\u003e (pH 10.1 – 10.7) and their sheets say they are \u003cstrong\u003eincompatible with oxidising agents\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRead literally, each says to keep away from the other. In practice these statements are about \u003cstrong\u003ebulk storage and uncontrolled mixing\u003c\/strong\u003e, not about the working solution the system is designed around. What that means on the job:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore the parts separately.\u003c\/strong\u003e Not on the same pallet, not in the same bund, not stacked on each other in the van.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombine only at the point of use\u003c\/strong\u003e, at the dilution and in the order Actichem specifies for the method you are using.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse mixed solution promptly and do not keep it.\u003c\/strong\u003e Do not mix a batch today for tomorrow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever seal mixed solution in a closed container.\u003c\/strong\u003e Peroxide solutions decompose slowly and \u003cstrong\u003erelease oxygen\u003c\/strong\u003e. A sealed drum or a capped pump-up left overnight builds pressure. Vent it, or better, do not store it at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever add anything else\u003c\/strong\u003e — no acids, no chlorine products, no other cleaners. This system is chemistry, and adding a third thing to it is how people get hurt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage and shelf life\u003c\/h3\u003e\n\u003cp\u003eHydrogen peroxide solutions \u003cstrong\u003edecompose slowly over time, releasing oxygen\u003c\/strong\u003e. Two consequences worth knowing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep containers vented as supplied.\u003c\/strong\u003e Do not decant Part A into a sealed, non-vented container and leave it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOld stock is weaker stock.\u003c\/strong\u003e Peroxide loses activity in storage. On a job where the result is going to be validated by sampling, working from a drum that has sat in a hot shed for two years is a false economy. Rotate stock and buy to the size of the work in front of you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStore cool, out of direct sunlight, away from reducing agents, acids, alkalis and combustible organic matter.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water for \u003cstrong\u003e10 to 15 minutes\u003c\/strong\u003e, holding the eyelids apart. Seek medical attention if pain persists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Rinse the mouth with water. Seek medical advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eDR610.20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003ePotentiated hydrogen peroxide oxidiser — MethSan main wash, Part A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild peroxide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e6.2\u003c\/strong\u003e — near neutral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide (CAS 7722-84-1) under 8%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eReducing agents, acids, alkalis, combustible organic matter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDecomposition\u003c\/td\u003e\n\u003ctd\u003eSolutions decompose slowly, releasing oxygen. Do not seal in a non-vented container.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH319\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e2P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 9 August 2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-part-a-5-ltr\"\u003eMethSan Part A 5 litre\u003c\/a\u003e — the same product in the smaller pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-prewash-5-ltr\"\u003eMethSan PreWash\u003c\/a\u003e (DR634) — step 1 of the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-fog-boost-part-b-5-ltr\"\u003eMethSan Part B Fog Boost\u003c\/a\u003e (DR636) — the Part B partner for fogging application.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-foam-boost-part-b-5-ltr\"\u003eMethSan Part B Foam Boost\u003c\/a\u003e (DR638) — the Part B partner for foam application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202308-Actichem-MethSan-Part-A-DR610.pdf\"\u003eActichem MethSan Part A safety data sheet (DR610, version 1.1, 9 August 2023)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: DR610.20\u003c\/p\u003e\n\u003cp\u003eSetting up for meth remediation for the first time, or unsure which parts of the system your job needs? Call us before you order. Buying Part A without a Part B, or without the Prewash, will stop you part way through the method.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"20LTR","offer_id":52316690710741,"sku":"DR610.20","price":208.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/DR610.20.png?v=1784607548","url":"https:\/\/ccwonline.com.au\/products\/actichem-methsan-part-a-20-ltr","provider":"Carpet Cleaners Warehouse","version":"1.0","type":"link"}