{"product_id":"actichem-methsan-fog-boost-part-b-5-ltr","title":"Actichem MethSan Fog Boost Part B 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s MethSan range is formulated to target the residues left by the manufacture and use of methamphetamine and other clandestine drugs.\u003c\/p\u003e\n\u003cp\u003eContamination is never uniform. Depending on the ingredients used, the cooking process, how far a room sits from the activity area, and how long that activity went on, a single property can carry a wide range of contamination levels from room to room. The MethSan system is built around that variability rather than assuming one strength suits everything.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes the system different\u003c\/strong\u003e is that it does not rely on oxidisers alone. Alongside the oxidising chemistry that breaks down chemical and biological residues, it uses a blend of two ingredients with a strong affinity for the \u003cstrong\u003emicro-carbon soils\u003c\/strong\u003e produced when hydrocarbons and other chemicals are heated and cooked. That pairing releases and suspends soils that have embedded themselves into paintwork and porous surfaces — which is where meth residue characteristically hides, and why surface wiping alone does not resolve it.\u003c\/p\u003e\n\u003ch3\u003eFog Boost or Foam Boost?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eFog Boost\u003c\/strong\u003e — the Part B formulated for \u003cstrong\u003ewet or cold fogging application\u003c\/strong\u003e. Choose it when you are treating whole rooms, ceilings, wall surfaces and cavities and you need the chemistry to reach everywhere the residue went. If you need dwell time on vertical surfaces instead, the \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-foam-boost-part-b-5-ltr\"\u003eFoam Boost\u003c\/a\u003e is the one you want. Many contractors carry both and use them at different stages of the same job.\u003c\/p\u003e\n\u003ch2\u003eThe MethSan system\u003c\/h2\u003e\n\u003cp\u003eMethSan is a \u003cstrong\u003emulti-part decontamination system\u003c\/strong\u003e, not a single product. The parts are designed to be used together in sequence, and ordering one without the others will leave you unable to complete the method.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStep 1 — Prewash\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-prewash-5-ltr\"\u003eMethSan PreWash\u003c\/a\u003e (DR634)\u003c\/td\u003e\n\u003ctd\u003eAlkaline prewash that lifts the surface soil, films and hydrocarbon residue so the main wash can reach the substrate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStep 2 — Main wash, Part A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-part-a-5-ltr\"\u003eMethSan Part A\u003c\/a\u003e (DR610)\u003c\/td\u003e\n\u003ctd\u003ePotentiated hydrogen peroxide. The oxidising half of the system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStep 2 — Main wash, Part B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-fog-boost-part-b-5-ltr\"\u003eFog Boost\u003c\/a\u003e (DR636) or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-foam-boost-part-b-5-ltr\"\u003eFoam Boost\u003c\/a\u003e (DR638)\u003c\/td\u003e\n\u003ctd\u003eThe boost partner, chosen by application method — fogging or foam application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFog Boost or Foam Boost?\u003c\/strong\u003e The choice is about how you are getting the chemistry onto the surface, not about how strong it is. \u003cstrong\u003eFog Boost\u003c\/strong\u003e is for fogging or ULV application, where you are treating whole rooms, wall and ceiling surfaces and cavities. \u003cstrong\u003eFoam Boost\u003c\/strong\u003e is for foam application, where dwell time on vertical surfaces is what you need. Many jobs use both at different stages.\u003c\/p\u003e\n\u003ch2\u003eMain wash and decontamination\u003c\/h2\u003e\n\u003cp\u003eThe main wash has to ensure the residues are either physically removed or chemically deactivated. That is a genuine challenge given the range of chemicals typically involved, the way they deposit onto surfaces, and the variety of substrates in a normal house. Targeted oxidation working in tandem with the micro-carbon residue chemistry is what gives the system its reliability.\u003c\/p\u003e\n\u003ch2\u003eWhat Part B does\u003c\/h2\u003e\n\u003cp\u003ePart B is not a diluent and it is not optional. It provides \u003cstrong\u003ehydrogen peroxide boosting activity\u003c\/strong\u003e, additional wetting properties, and the micro-carbon residue removal chemistry that distinguishes this system. \u003cstrong\u003ePart A on its own is just peroxide.\u003c\/strong\u003e Part B is what turns it into the MethSan main wash.\u003c\/p\u003e\n\u003cp\u003ePart B comes in two versions, chosen by application method rather than by strength.\u003c\/p\u003e\n\u003ch2\u003eMethSan Part B FOG Boost\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree potentiators\u003c\/strong\u003e that raise the oxidising potential of the Part A solution substantially.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon residue chasing chemistry\u003c\/strong\u003e releases micro-chemical particles so they can be removed or neutralised by oxidation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormulated for micro-droplet formation\u003c\/strong\u003e — specific solvents ensure the solution atomises properly through a wet or cold fogger, which is what gives coverage and penetration into micro-pores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion inhibitors and pH balance\u003c\/strong\u003e protect your equipment and the customer's surfaces. Fogging equipment is expensive and a poorly buffered solution will eat it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA note on fogging\u003c\/h3\u003e\n\u003cp\u003eFogging puts a fine aerosol into the air of a sealed space and leaves it suspended. That is the whole point — it is how you reach cavities, ceiling voids and the tops of surfaces you cannot physically wipe. It also means \u003cstrong\u003ethe atmosphere in that room is not one you can be in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not fog an occupied space.\u003c\/strong\u003e Confirm the property is clear, including pets, before you start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate respiratory protection\u003c\/strong\u003e for entry and for any work while fog is still airborne. This is the application method with the highest inhalation exposure in the whole system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObserve the dwell and re-entry time\u003c\/strong\u003e for the method you are working to. Going back in early to check on things is how technicians get dosed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsopropanol at 10–30%\u003c\/strong\u003e means this concentrate should be kept away from ignition sources, and the fogged atmosphere should not be created near one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWorking to a remediation standard\u003c\/h2\u003e\n\u003cp\u003eMethamphetamine decontamination is not a cleaning job with a stronger chemical. It is a \u003cstrong\u003eremediation process that has to be documented and validated.\u003c\/strong\u003e Chemistry is one input.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssess before you treat.\u003c\/strong\u003e Contamination varies enormously between properties, and within a single property, depending on what was cooked or smoked, for how long, where, and how the air moved. Pre-remediation sampling tells you where you actually stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork to the applicable guideline.\u003c\/strong\u003e Australian remediation work is conducted with reference to the Commonwealth \u003cem\u003eClandestine Drug Laboratory Remediation Guidelines\u003c\/em\u003e and the relevant state or territory health department requirements. Confirm the current clearance criteria applying to your job before you quote it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValidate afterwards.\u003c\/strong\u003e Post-remediation sampling is what closes the job out. \u003cstrong\u003eNo chemical, including this one, can be claimed to have achieved clearance without it.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument everything.\u003c\/strong\u003e Products used, dilutions, methods, dwell times, areas treated, and the sampling results. This is a job that gets reviewed after the fact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe supply the chemistry. \u003cstrong\u003eWe are not in a position to certify a property, and neither is any product.\u003c\/strong\u003e If you are new to meth remediation, get trained and get an independent sampler involved before you take the work on.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously carried no safety information at all.\u003c\/strong\u003e That was an omission on our part and it has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for DR636, version 1.1 issued 7 August 2023, classifies MethSan FOG Boost as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage (Serious Eye Damage Category 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation (Skin Corrosion\/Irritation Category 2)\u003c\/li\u003e\n\u003cli\u003eNot a dangerous good. No poisons schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H318 — serious eye damage\u003c\/h3\u003e\n\u003cp\u003eThis is the highest eye classification in the GHS system. It is \u003cstrong\u003edamage\u003c\/strong\u003e, not irritation — a splash can cause permanent injury. The concentrate is alkaline at \u003cstrong\u003epH 10.1\u003c\/strong\u003e, and alkaline eye injuries are characteristically \u003cstrong\u003epainless at first and progressive\u003c\/strong\u003e, which is why people under-react to them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles, not safety glasses\u003c\/strong\u003e, whenever the concentrate is decanted, diluted or applied. If it gets in an eye, flush with running water immediately, hold the eyelids apart, and \u003cstrong\u003eseek medical attention without delay\u003c\/strong\u003e — do not wait to see whether it settles.\u003c\/p\u003e\n\u003ch3\u003e⚠ H315 and prolonged contact\u003c\/h3\u003e\n\u003cp\u003eRemediation is not a five-minute job. You will be in a contaminated property for hours, repeatedly wetting surfaces overhead. \u003cstrong\u003eCumulative contact is what causes the skin problems on these jobs\u003c\/strong\u003e, not a single splash. Wear proper protective clothing and change out of anything that gets soaked.\u003c\/p\u003e\n\u003ch3\u003e⚠ Part A and Part B — storage and mixing\u003c\/h3\u003e\n\u003cp\u003eThis deserves a moment because the safety data sheets read confusingly if you take them in isolation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart A is an oxidiser.\u003c\/strong\u003e Its sheet says to keep it away from reducing agents, acids, \u003cstrong\u003ealkalis\u003c\/strong\u003e and combustible organic matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth Part B products are alkaline\u003c\/strong\u003e (pH 10.1 – 10.7) and their sheets say they are \u003cstrong\u003eincompatible with oxidising agents\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRead literally, each says to keep away from the other. In practice these statements are about \u003cstrong\u003ebulk storage and uncontrolled mixing\u003c\/strong\u003e, not about the working solution the system is designed around. What that means on the job:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore the parts separately.\u003c\/strong\u003e Not on the same pallet, not in the same bund, not stacked on each other in the van.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombine only at the point of use\u003c\/strong\u003e, at the dilution and in the order Actichem specifies for the method you are using.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse mixed solution promptly and do not keep it.\u003c\/strong\u003e Do not mix a batch today for tomorrow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever seal mixed solution in a closed container.\u003c\/strong\u003e Peroxide solutions decompose slowly and \u003cstrong\u003erelease oxygen\u003c\/strong\u003e. A sealed drum or a capped pump-up left overnight builds pressure. Vent it, or better, do not store it at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever add anything else\u003c\/strong\u003e — no acids, no chlorine products, no other cleaners. This system is chemistry, and adding a third thing to it is how people get hurt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation and personal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThis product is fogged, which makes respiratory protection the priority rather than an afterthought. Use protection appropriate to the fogging method and the space. Chemical goggles — a fogged atmosphere reaches your eyes whether you splash anything or not. Protective clothing. An eyewash unit should be on site.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water, holding the eyelids apart. \u003cstrong\u003eSeek medical attention without delay.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately remove all contaminated clothing. Flush skin and hair with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Rinse the mouth with water. Seek medical advice without delay.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eDR636.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAlkaline Part B booster for fogging application — MethSan main wash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear blue liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eLemon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.1\u003c\/strong\u003e as concentrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eIsopropanol (CAS 67-63-0) 10–30%; sodium carbonate (CAS 497-19-8) under 10%; EDTA tetrasodium salt (CAS 64-02-8) under 10%; proprietary quaternary ammonium compound under 10%; proprietary surfactants under 10% each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids and oxidising agents — see the Part A and Part B note above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 7 August 2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-part-a-5-ltr\"\u003eMethSan Part A\u003c\/a\u003e (DR610) — \u003cstrong\u003erequired\u003c\/strong\u003e. This product does nothing without it.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-prewash-5-ltr\"\u003eMethSan PreWash\u003c\/a\u003e (DR634) — step 1 of the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-methsan-foam-boost-part-b-5-ltr\"\u003eMethSan Part B Foam Boost\u003c\/a\u003e (DR638) — the alternative Part B, for foam application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202308-Actichem-MethSan-Fog-Boost-Part-B-DR636.pdf\"\u003eActichem MethSan FOG Boost safety data sheet (DR636, version 1.1, 7 August 2023)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: DR636.05\u003c\/p\u003e\n\u003cp\u003eSetting up for meth remediation for the first time, or unsure which parts of the system your job needs? Call us before you order — a Part B on its own will not complete a remediation.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":52316690776277,"sku":"DR636.05","price":151.14,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-MethSan-Fog-Boost-Part-B-5-ltr.jpg?v=1780551749","url":"https:\/\/ccwonline.com.au\/products\/actichem-methsan-fog-boost-part-b-5-ltr","provider":"Carpet Cleaners Warehouse","version":"1.0","type":"link"}