{"title":"Concrete Cleaning Chemicals","description":"\u003cp\u003eConcrete is porous, alkaline and unforgiving of shortcuts. It takes up oil and traffic soil into the surface rather than holding it on top, which is why a pressure wash alone lifts the loose material and leaves the stain.\u003c\/p\u003e\n\u003cp\u003eIt is also the substrate most often damaged by the wrong chemistry. Acid on a polished or sealed slab is not a cleaning decision, it is a resurfacing bill.\u003c\/p\u003e\n\u003cp\u003eThe range covers cleaning and degreasing with HydraMaster HydraBoost CT 2.95 kg and GrungeSlayer 2.9 kg, Hydro-Force Viper Peroxiblast powder 3.4 kg and Viper Peroxibright CTG 3 litre, and Actichem Oxyboost Plus in 1 kg and 4.5 kg; grout and surface work with Actichem Tile and Grout Cream in 500 ml and 5 litre; and sealing with Actichem Pre-Seal 5 litre, Instaseal and Instagloss in 15 litre, and Solv Sealer Gold 5 litre.\u003c\/p\u003e\n\u003ch2\u003eHow to choose\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEstablish what is on the slab before choosing anything.\u003c\/strong\u003e Bare, sealed, polished and burnished concrete respond differently to the same product. If you cannot tell, test an inconspicuous area and watch what the water does — a slab that darkens is porous.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOxidising and solvent degreasers solve different stains.\u003c\/strong\u003e Peroxide-based products lift organic and traffic soil. Oil that has soaked in needs to be drawn back out, and that is a dwell-and-repeat process, not a single pass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeal only when the slab is genuinely dry.\u003c\/strong\u003e Sealer over residual moisture clouds and lifts. On a wet-cleaned floor that usually means the day after, not the same afternoon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-seal and topcoat are a system.\u003c\/strong\u003e Pre-Seal prepares porous substrate so the finish coat sits evenly rather than soaking in unevenly. Skipping it costs more in product than it saves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDecide gloss level before you start.\u003c\/strong\u003e Instagloss and Solv Sealer Gold produce different finishes. Customers notice sheen far more than they notice cleanliness.\u003c\/p\u003e\n\u003cp\u003eTile and grout chemistry is in \u003ca href=\"\/collections\/tile-grout-cleaning\"\u003eTile \u0026amp; Grout Cleaning\u003c\/a\u003e, the tools in \u003ca href=\"\/collections\/tile-grout-tools-accessories\"\u003eTile \u0026amp; Grout Tools \u0026amp; Accessories\u003c\/a\u003e, spinners in \u003ca href=\"\/collections\/tile-grout-cleaning-equipment\"\u003eTile \u0026amp; Grout Cleaning Equipment\u003c\/a\u003e, and abrasives in \u003ca href=\"\/collections\/floor-pads\"\u003eFloor Pads\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"hydramaster-hydraboost-ct-2-95kg","title":"HydraMaster HydraBoost CT 2.95kg","description":"\u003ch2\u003eHydraMaster HydraBoost CT is a powdered high-powered concrete and tile and grout cleaner and degreaser\u003c\/h2\u003e\n\u003ch2\u003eHydraMaster HydraBoost CT is designed to safely and effectively dissolve, break down, dislodge, and emulsify even the grimiest soils from concrete, finished concrete, and ceramic, porcelain, and quarry tile floors and surfaces.\u003c\/h2\u003e\n\u003cp\u003eHydraBoost CT is an economical cleaner and degreaser designed to penetrate porous surfaces and dissolve the toughest build-up of oil and grease. Alkaline cleaning agents and heavy-duty surfactants are activated by the power of oxygen to allow the effervescent solution to get into every crack, crevice, and pore. It is the ideal cleaning agent for heavily soiled restaurant kitchen tile floors and other indoor and outdoor surfaces exposed to high levels of grease and oil contamination. It does so without the use of harsh chlorinated solvents or mineral spirits, leaving the surface squeaky clean and residue-free.\u003c\/p\u003e\n\u003cp\u003eHydraBoost CT is specifically designed to work in conjunction with high-powered hard surface cleaning wands such as the RX-20 with hard floor attachments, and rotary or stationary hard surface cleaning extraction wands. Its powerful formula though will work with virtually any brush agitation system, automatic floor scrubber, or even a mop and bucket cleaning system.\u003c\/p\u003e\n\u003cp\u003eHydraBoost CT is designed to be used as a preconditioning agent and applied to the surface being cleaned first. The oxygenated cleaning power of HydraBoost CT also makes it an ideal boosting agent for trashed and neglected carpet that has been exposed to high levels of oxygenated oils and grease. Simply add a couple of ounces of HydraBoost CT to your favourite traffic lane cleaner\/preconditioner for the ultimate in cleaning power.  \u003c\/p\u003e\n\u003cp\u003e \u003cb\u003eDilution:\u003c\/b\u003e 15g\/Ltr     \u003cb\u003eRTU pH:\u003c\/b\u003e 11-12pH     \u003cb\u003eContains:\u003c\/b\u003e 2.95kg \u003c\/p\u003e\n\u003ch2\u003eDirections:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead the entire label before using it. Use only as directed. Always pretest surface with cleaning solution for colour­fastness prior to cleaning. Ensure the work area is well-ventilated during application. Keep children and pets out of the area during application and drying. HydraBoost CT is not recommended for cleaning natural stone floors.\u003c\/li\u003e\n\u003cli\u003eThis product is ultra-concentrated. For normal soiling, mix 15 grams of \u003cstrong\u003e\u003cem\u003eHydraBoost CT\u003c\/em\u003e\u003c\/strong\u003e powder with one litre of warm or hot water into a professional sprayer. For extreme soiling, mix three to four ounces of powder with a gallon of warm or hot water into a professional sprayer. For application through an Inline Injection Sprayer, mix 360 grams of powder and fill the container with water. Use 4:1 dilution.\u003c\/li\u003e\n\u003cli\u003eApply mixed solution with sprayer evenly and liberally across the surface to be cleaned. You can use a pump-up sprayer or a battery-powered sprayer. If preferred, you can apply mixed solution with a damp mop, sponge, or other appropriate professional equipment. If using a mop for solution application and surface cleaning, change your mop water often to make sure that soil is not re-deposited.\u003c\/li\u003e\n\u003cli\u003eAllow for 5 -10 minutes of dwell time. For concrete, if stains have been deeply absorbed, allow 15 minutes of dwell time so the solution has time to reach into the concrete pores and crevices and the oxygen-activated effervescent solution can dissolve the soiling and lighten discoloration.\u003c\/li\u003e\n\u003cli\u003eFor best results, agitate and extract cleaning solution using warm or hot water and a rotary agitation hard surface cleaner such as the RX-20 with hard floor attachments, or rotary or stationary hard surface cleaning extraction wands For tight spaces or especially sensitive surfaces, use a hard surface cleaning wand or simply mop to rinse with clean warm or hot water.\u003c\/li\u003e\n\u003cli\u003eWhen the area has been rinsed thoroughly. Allow the floor to dry.\u003c\/li\u003e\n\u003cli\u003eFor faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFor use as a carpet cleaning solution booster\/additive\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMix 15 grams of HydraBoost CT with each litre of mixed pre-spray (traffic lane cleaner, preconditioner) solution. This mixture is not recommended for wool carpeting or residential nylon carpets that are being properly maintained. \u003c\/li\u003e\n\u003cli\u003eAlways pretest surface with boosted cleaning solution for colour­fastness prior to cleaning.\u003c\/li\u003e\n\u003cli\u003eProceed to apply the pre-spray and continue cleaning in accordance with the directions of the pre-spray. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eInformation sheets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHydraMaster’s product information sheet and product label for this item were previously linked here. Those files are no longer online — the host they were on has gone, not just the documents — so we have removed the links rather than leave you clicking on nothing. We have asked HydraMaster for current copies to host ourselves.\u003c\/p\u003e\n\u003cp\u003eThe Safety Data Sheet below is current and hosted by us. \u003cstrong\u003eIf you need the product information sheet or the label before we have them, ask us and we will get them from HydraMaster for you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eThe Australian safety data sheet issued by Aberford Holdings (importer, trading as Carpet Cleaners Warehouse) classifies HydraBoost CT as a hazardous chemical and dangerous goods: signal word \u003cstrong\u003eDanger\u003c\/strong\u003e; harmful if swallowed; causes severe skin burns and eye damage (sodium metasilicate 10–20%); may cause an allergic skin reaction; may cause respiratory irritation; toxic to aquatic life with long lasting effects. Contains sodium percarbonate — keep away from combustible material. Transport: UN 3262, Corrosive solid, basic, inorganic, n.o.s., Class 8, Packing Group II. Avoid breathing dust, wear chemical-resistant gloves and goggles, add the powder to water (never water to powder), and read the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/950-782_HydraBoost_CT_SDS_AU_31102026.pdf\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before first use. For poisons advice, call 13 11 26.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/collections\/dangerous-goods-shipping-surcharges-apply\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/CCW_Dangerous_Goods_Limited_Quantity_Mark_png.jpg\" alt=\"Dangerous goods limited quantity mark\" width=\"31\" height=\"29\"\u003e DG Shipping Surcharge Applies\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/950-782_HydraBoost_CT_SDS_AU_31102026.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – HydraBoost CT (Australian edition, Aberford Holdings, version 1.0, 31 October 2026) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202211-Hydramaster-Hydraboost-CT-950-782.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer's Safety Data Sheet – HydraBoost CT (HydraMaster, United States edition, revised 7 November 2022) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Australian sheet is prepared by Aberford Holdings from the manufacturer's US edition and reflects Aberford's own classification under the Australian WHS Regulations and the ADG Code. It is reviewed at least every five years, or sooner if the manufacturer revises the source sheet.\u003c\/p\u003e\n\u003ch2\u003eRelated products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/hydramaster-hydrasolv-hard-surface-cleaner-3-8ltr\"\u003eHydraMaster HydraSolv Hard Surface Cleaner 3.8ltr\u003c\/a\u003e — solvent-based tile and grout pre-spray\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hydramaster-grungeslayer-prespray-2-95kg\"\u003eHydraMaster GrungeSlayer Cleaner 2.9kg\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Hydramaster","offers":[{"title":"2.95KG","offer_id":50672851143,"sku":"950-782-B","price":99.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/HydraMaster-HydraBoost-CT-2_95kg.jpg?v=1780550317"},{"product_id":"bridgepoint-viper-peroxibright-ctg-3-8ltr","title":"Hydro-Force Viper Peroxibright CTG 3ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eViper Peroxibright CTG is a peroxide-activated cleaner \u003cem\u003eand brightener\u003c\/em\u003e for concrete, tile and grout. An effervescent oxygenated solution carries a mixture of specialised surfactants and non-butyl solvents into every crevice, crack and pore to emulsify, dissolve and deflocculate stubborn soiling.\u003c\/p\u003e\n\u003ch2\u003eBrightening Without Acid or Chlorine\u003c\/h2\u003e\n\u003cp\u003eThis is the reason to choose it. It brightens grout lines \u003cstrong\u003ewithout harsh acids or chlorine bleaches\u003c\/strong\u003e, which can damage grout and the surrounding flooring.\u003c\/p\u003e\n\u003cp\u003eIt is also \u003cstrong\u003eself-neutralising\u003c\/strong\u003e, so it does not need the neutralisation step that an acid product requires, and it cleans without leaving the watermarks or residue that other chemistries can.\u003c\/p\u003e\n\u003cp\u003eWhere grout is discoloured rather than mineral-scaled, this is the product. Where the problem is hard water deposits or efflorescence, that is \u003ca href=\"\/products\/bridgepoint-viper-renew-3-8ltr\"\u003eViper Renew (CH49GL)\u003c\/a\u003e instead — and Renew is an acid, with all that follows.\u003c\/p\u003e\n\u003ch2\u003eChoosing Across the Viper Range\u003c\/h2\u003e\n\u003cp\u003eThe soil decides the chemistry, and the pH direction decides the risk. Alkaline products lift greasy and organic soil; the acid product dissolves mineral deposits. They are not interchangeable.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003epH direction\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bridgepoint-viper-venom-3-8ltr\"\u003eViper Venom (CR22GL)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh alkaline, solvent fortified\u003c\/td\u003e\n\u003ctd\u003eThe general heavy-soil tile and grout prespray. Also fire and smoke work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/viper-venom-powder-with-citrus-2-7kg\"\u003eViper Venom Powder (CR23A)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh alkaline, solvent fortified\u003c\/td\u003e\n\u003ctd\u003eThe same job in powder form — greasy restaurant soils, and cheaper per litre made up.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bridgepoint-viper-peroxiblast-powder-3-4kg\"\u003eViper Peroxiblast Powder (CH48A)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAlkaline, oxygen activated\u003c\/td\u003e\n\u003ctd\u003eConcrete degreasing — oils, fats and greases. \u003cstrong\u003eNot for natural stone.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViper Peroxibright CTG (CH41GL) — this product\u003c\/td\u003e\n\u003ctd\u003eOxygen activated, self-neutralising\u003c\/td\u003e\n\u003ctd\u003eCleaning \u003cem\u003eand brightening\u003c\/em\u003e grout without acids or chlorine bleach.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bridgepoint-viper-renew-3-8ltr\"\u003eViper Renew (CH49GL)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eAcid\u003c\/strong\u003e, organic\u003c\/td\u003e\n\u003ctd\u003eMineral deposits — hard water, soap scum, efflorescence. When alkaline products have failed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAlkaline first. Most tile and grout soil is greasy and organic, and that is what the alkaline products are for. Reach for the acid only when what is left is mineral.\u003c\/p\u003e\n\u003ch2\u003eStanding Rules for Hard Surface Chemistry\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePretest in an inconspicuous area, every job.\u003c\/strong\u003e Tile, grout and stone vary, and so does what has been done to them before.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever mix products.\u003c\/strong\u003e Acid and alkaline neutralise each other and waste both; acid mixed with chlorinated products can generate chlorine gas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever let it dry on the surface.\u003c\/strong\u003e Dwell, then clean and extract while it is still wet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse thoroughly.\u003c\/strong\u003e Residue left in grout attracts soil and the floor looks worse in a month than it did before you cleaned it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate\u003c\/strong\u003e, and keep children and pets out of the area during application and drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnow your stone.\u003c\/strong\u003e Marble, travertine and limestone are calcareous and are attacked by acid. Ask before you spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTools\u003c\/h2\u003e\n\u003cp\u003eDesigned to work with rotary hard surface extractors such as the \u003ca href=\"\/products\/hydroforce-sx12-rotary-tile-cleaner\"\u003eHydro-Force SX-12 (AW104)\u003c\/a\u003e and \u003ca href=\"\/products\/hydroforce-sx15-rotary-tile-cleaner\"\u003eSX-15 (AW105)\u003c\/a\u003e, and usable with any hard surface brush or mop system. Apply with a pump-up sprayer — see the \u003ca href=\"\/products\/tcbs-the-countries-best-sprayer-12-ltr\"\u003eTCBS (AS16A)\u003c\/a\u003e for solvent-bearing chemistry, or the \u003ca href=\"\/products\/budget-commercial-sprayer-12ltr\"\u003eAS14A\u003c\/a\u003e for water-based and acid products.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes it need neutralising afterwards?\u003c\/h3\u003e\n\u003cp\u003eNo. It is self-neutralising, which is one of its main advantages over acid brighteners.\u003c\/p\u003e\n\u003ch3\u003eWill it bleach or damage the grout?\u003c\/h3\u003e\n\u003cp\u003eIt brightens without acids or chlorine bleach, which are what damage grout and surrounding materials. Pretest regardless.\u003c\/p\u003e\n\u003ch3\u003ePeroxibright or Peroxiblast?\u003c\/h3\u003e\n\u003cp\u003ePeroxibright cleans and brightens grout lines. \u003ca href=\"\/products\/bridgepoint-viper-peroxiblast-powder-3-4kg\"\u003ePeroxiblast Powder (CH48A)\u003c\/a\u003e is the alkaline degreaser for oils and greases on concrete.\u003c\/p\u003e\n\u003ch3\u003eWill it remove hard water staining?\u003c\/h3\u003e\n\u003cp\u003eNo. Mineral deposits need an acid — see \u003ca href=\"\/products\/bridgepoint-viper-renew-3-8ltr\"\u003eViper Renew (CH49GL)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with a mop?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed to suit rotary extractors but works with any hard surface brush or mop system.\u003c\/p\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202102-Hydro-Force_Viper_Peroxibright_CTG_CH41_SDS_58846e6e-1d3a-40ef-af86-4929345ba6af.pdf\"\u003eSafety Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/BP-CH41GL-Label.pdf\"\u003eProduct Label (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/BP-CH41GL-Spec-Sheet.pdf\"\u003eSpec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat We See in the Field\u003c\/h2\u003e\n\u003cp\u003eGrout that looks stained is often just soiled, and a brightener does what a customer thinks only a bleach or a colour seal can. Trying this before proposing a colour seal saves the customer money and saves you a much bigger job.\u003c\/p\u003e","brand":"Hydroforce","offers":[{"title":"3.8LTR","offer_id":50673781319,"sku":"CH41GL","price":100.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Hydro-Force-Viper-Peroxibright-CTG-3ltr.jpg?v=1780550546"},{"product_id":"bridgepoint-viper-peroxiblast-powder-3-4kg","title":"Hydro-Force Viper Peroxiblast Powder 3.4kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eViper Peroxiblast Powder is a peroxide-activated alkaline cleaner and degreaser for concrete, tile and grout. It combines surfactants and alkaline builders with an oxygen booster, and penetrates concrete on contact to soften, lift and remove oils, soils, fats and greases.\u003c\/p\u003e\n\u003ch2\u003eImportant — Not for Natural Stone\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is not for use on natural stone.\u003c\/strong\u003e That is the manufacturer's instruction, not a caution.\u003c\/p\u003e\n\u003cp\u003eFor stone work, use a product specified for it and pretest regardless.\u003c\/p\u003e\n\u003ch2\u003eChoosing Across the Viper Range\u003c\/h2\u003e\n\u003cp\u003eThe soil decides the chemistry, and the pH direction decides the risk. Alkaline products lift greasy and organic soil; the acid product dissolves mineral deposits. They are not interchangeable.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003epH direction\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bridgepoint-viper-venom-3-8ltr\"\u003eViper Venom (CR22GL)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh alkaline, solvent fortified\u003c\/td\u003e\n\u003ctd\u003eThe general heavy-soil tile and grout prespray. Also fire and smoke work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/viper-venom-powder-with-citrus-2-7kg\"\u003eViper Venom Powder (CR23A)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh alkaline, solvent fortified\u003c\/td\u003e\n\u003ctd\u003eThe same job in powder form — greasy restaurant soils, and cheaper per litre made up.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViper Peroxiblast Powder (CH48A) — this product\u003c\/td\u003e\n\u003ctd\u003eAlkaline, oxygen activated\u003c\/td\u003e\n\u003ctd\u003eConcrete degreasing — oils, fats and greases. \u003cstrong\u003eNot for natural stone.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bridgepoint-viper-peroxibright-ctg-3-8ltr\"\u003eViper Peroxibright CTG (CH41GL)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eOxygen activated, self-neutralising\u003c\/td\u003e\n\u003ctd\u003eCleaning \u003cem\u003eand brightening\u003c\/em\u003e grout without acids or chlorine bleach.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bridgepoint-viper-renew-3-8ltr\"\u003eViper Renew (CH49GL)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eAcid\u003c\/strong\u003e, organic\u003c\/td\u003e\n\u003ctd\u003eMineral deposits — hard water, soap scum, efflorescence. When alkaline products have failed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAlkaline first. Most tile and grout soil is greasy and organic, and that is what the alkaline products are for. Reach for the acid only when what is left is mineral.\u003c\/p\u003e\n\u003ch2\u003eReplacing Solvent Degreasers\u003c\/h2\u003e\n\u003cp\u003eThe manufacturer positions Peroxiblast Powder as a safer replacement for mineral spirits and chlorinated solvent-based concrete degreasers. The reasoning is straightforward: alkalinity plus oxygen and surfactants doing the work that a solvent would otherwise do, without the solvent's flammability, fumes and disposal problems.\u003c\/p\u003e\n\u003cp\u003eCCW has not independently tested it against those products, but the substitution logic is sound and the WHS argument for getting chlorinated solvents off a site does not need much defending.\u003c\/p\u003e\n\u003ch2\u003eDilution\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eJob\u003c\/th\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal soiling\u003c\/td\u003e\n\u003ctd\u003e15 g per litre of warm or hot water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis product is ultra-concentrated. Read the entire label before use, and pretest every surface for colourfastness.\u003c\/p\u003e\n\u003ch2\u003eStanding Rules for Hard Surface Chemistry\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePretest in an inconspicuous area, every job.\u003c\/strong\u003e Tile, grout and stone vary, and so does what has been done to them before.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever mix products.\u003c\/strong\u003e Acid and alkaline neutralise each other and waste both; acid mixed with chlorinated products can generate chlorine gas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever let it dry on the surface.\u003c\/strong\u003e Dwell, then clean and extract while it is still wet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse thoroughly.\u003c\/strong\u003e Residue left in grout attracts soil and the floor looks worse in a month than it did before you cleaned it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate\u003c\/strong\u003e, and keep children and pets out of the area during application and drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnow your stone.\u003c\/strong\u003e Marble, travertine and limestone are calcareous and are attacked by acid. Ask before you spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTools\u003c\/h2\u003e\n\u003cp\u003eDesigned to work with rotary hard surface extractors such as the \u003ca href=\"\/products\/hydroforce-sx12-rotary-tile-cleaner\"\u003eHydro-Force SX-12 (AW104)\u003c\/a\u003e and \u003ca href=\"\/products\/hydroforce-sx15-rotary-tile-cleaner\"\u003eSX-15 (AW105)\u003c\/a\u003e, and usable with any hard surface brush or mop system. Apply with a pump-up sprayer — see the \u003ca href=\"\/products\/tcbs-the-countries-best-sprayer-12-ltr\"\u003eTCBS (AS16A)\u003c\/a\u003e for solvent-bearing chemistry, or the \u003ca href=\"\/products\/budget-commercial-sprayer-12ltr\"\u003eAS14A\u003c\/a\u003e for water-based and acid products.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use it on natural stone?\u003c\/h3\u003e\n\u003cp\u003eNo. The manufacturer excludes natural stone.\u003c\/p\u003e\n\u003ch3\u003eHow much powder per litre?\u003c\/h3\u003e\n\u003cp\u003e15 grams per litre of warm or hot water for normal soiling.\u003c\/p\u003e\n\u003ch3\u003eWhat is the oxygen booster doing?\u003c\/h3\u003e\n\u003cp\u003ePeroxide chemistry adds an oxidising action alongside the alkaline and surfactant cleaning, which is what lifts organic staining rather than just the grease.\u003c\/p\u003e\n\u003ch3\u003ePeroxiblast or Peroxibright?\u003c\/h3\u003e\n\u003cp\u003ePeroxiblast is the alkaline degreaser for oils and greases on concrete. \u003ca href=\"\/products\/bridgepoint-viper-peroxibright-ctg-3-8ltr\"\u003ePeroxibright CTG (CH41GL)\u003c\/a\u003e is the cleaner and brightener for grout lines.\u003c\/p\u003e\n\u003ch3\u003eWhat brush should I use?\u003c\/h3\u003e\n\u003cp\u003eIt works with virtually any hard surface brush or mop system, and with rotary extractors.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eThe Australian safety data sheet issued by Aberford Holdings (importer, trading as Carpet Cleaners Warehouse) classifies the product as a hazardous chemical and dangerous goods: signal word \u003cstrong\u003eDanger\u003c\/strong\u003e; causes severe skin burns and eye damage; may cause respiratory irritation. Transport: UN 3262, Class 8, Packing Group II. Wear chemical-resistant gloves, goggles and a face shield when handling it, and add the product to water when diluting, never the reverse. Avoid breathing dust, mist or vapour. Read the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/CH48_Viper_Peroxiblast_Powder_SDS_AU_05112026.pdf\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before first use. For poisons advice, call 13 11 26.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/collections\/dangerous-goods-shipping-surcharges-apply\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/CCW_Dangerous_Goods_Limited_Quantity_Mark_png.jpg\" alt=\"Dangerous goods limited quantity mark\" width=\"31\" height=\"29\"\u003e DG Shipping Surcharge Applies\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/CH48_Viper_Peroxiblast_Powder_SDS_AU_05112026.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Hydro-Force Viper Peroxiblast Powder (Australian edition, Aberford Holdings, version 1.0, 5 November 2026) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202302-Hydroforce-Viper_Peroxiblast_Powder-CH48-SDS_1a3fd73c-fc4b-4017-b589-86efbfce2f90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer's Safety Data Sheet – Hydro-Force Viper Peroxiblast Powder (Hydro-Force \/ Aramsco, United States edition, revised 13 February 2023) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202021-Label-Viper-Peroxiblast-Powder-2601-0227.pdf\"\u003eProduct Label (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202021-Spec-Sheet-Viper-Peroxiblast-Powder-en.pdf\"\u003eSpec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Australian sheet is prepared by Aberford Holdings from the manufacturer's US edition and reflects Aberford's own classification under the Australian WHS Regulations and the ADG Code. It is reviewed at least every five years, or sooner if the manufacturer revises the source sheet. Labels, specification sheets and cleaning guides are the manufacturer's North American editions and are provided for technical reference.\u003c\/p\u003e\n\u003ch2\u003eWhat We See in the Field\u003c\/h2\u003e\n\u003cp\u003eConcrete degreasing is where operators reach for the strongest thing on the truck. An oxygen-activated alkaline powder at the right dilution and dwell will usually get there without putting a chlorinated solvent into a workshop or a food premises.\u003c\/p\u003e","brand":"Hydroforce","offers":[{"title":"3.4KG","offer_id":50673782151,"sku":"CH48A","price":107.91,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Hydro-Force-Viper-Peroxiblast-Powder-3_4kg.jpg?v=1780550547"},{"product_id":"actichem-oxy-boost-plus-1kg","title":"Actichem Oxyboost Plus 1kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Oxyboost Plus is a super-concentrate oxidising compound designed for use both as an additive to cleaning solutions and as a stand-alone product. It provides powerful oxidising activity to cleaning solutions, with particular applications in fire restoration, stain removal and deodorising.\u003c\/p\u003e\n\u003cp\u003eIt derives its oxidising capability from \u003cstrong\u003epotentiated sodium percarbonate\u003c\/strong\u003e, which provides maximum oxygen release even at ambient temperatures. The ready-to-use solution is alkaline. It therefore offers unique performance for both hard and soft surface cleaning applications where the oxidising ability of hydrogen peroxide is limited.\u003c\/p\u003e\n\u003cp\u003eThis 1 kg pail is the trial and van-stock size. At 10 to 20 g per litre it makes 50 to 100 litres of working solution.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStain removal\u003c\/strong\u003e — powerful on tannin and colour stains such as soft drink, cordial, grass, blood and many other organic stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning booster\u003c\/strong\u003e — adding Oxyboost Plus to your cleaning solution significantly enhances results, as its oxidising and destaining power removes many soils that would otherwise be left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightens colours\u003c\/strong\u003e — enhances and brightens the colours of fabrics and carpets, and overcomes dullness and greying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFibre safe\u003c\/strong\u003e — suitable on all synthetic and most delicate fibres and fabrics, including coloured fabrics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser friendly\u003c\/strong\u003e — low-odour formula.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable on practically all water-cleanable surfaces, including painted walls, ceilings, carpets, soft furnishings, lacquered wood, metals, tiles, lino, natural stone and concrete. Care should be taken with pH-sensitive substrates such as natural fibres. A neutralising acid rinse after cleaning is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on the acid rinse.\u003c\/strong\u003e Do that as a separate, later step on a rinsed surface — never by adding acid to an Oxyboost solution. See the reactivity section below.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity. Best performance is obtained in hot solutions.\u003c\/p\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdd \u003cstrong\u003e10 to 20 g\u003c\/strong\u003e Oxyboost Plus per litre of water or ready-to-use cleaning solution.\u003c\/li\u003e\n\u003cli\u003eFor heavy-duty conditions, up to \u003cstrong\u003e30 g\/L\u003c\/strong\u003e can be added.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOxyboost Plus must not be added to acidic solutions, deodorisers, chlorine or enzyme products.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIt can be added to fire restoration detergents, carpet and upholstery presprays, alkaline tile-cleaning detergents, and water-based degreasers.\u003c\/li\u003e\n\u003cli\u003eWarm or hot water and cleaning solutions will improve performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir well and use the solution within 30 minutes.\u003c\/strong\u003e Once mixed, the oxygen is being released whether you use it or not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHard surface and carpet cleaning\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCover areas not being cleaned. Only apply solution to an area that can be cleaned and rinsed within 30 to 40 minutes.\u003c\/li\u003e\n\u003cli\u003eApply the solution to a workable area using a sprayer, sponge or scrubber machine.\u003c\/li\u003e\n\u003cli\u003eAgitate and allow 15 to 30 minutes dwell time.\u003c\/li\u003e\n\u003cli\u003eRinse the surface thoroughly with clean water. Carpets and soft furnishings are best rinsed using wet extraction equipment with a 1:100 \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-20-ltr\"\u003eRinse Pro\u003c\/a\u003e solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpot removal from carpets and fine stone\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAdd Oxyboost Plus to a warm or hot prespray or tile cleaning solution — \u003cstrong\u003enon-acidic\u003c\/strong\u003e. Neutral pH product solutions generally work best. The solution can also be made up with water alone.\u003c\/li\u003e\n\u003cli\u003eApply to the affected area.\u003c\/li\u003e\n\u003cli\u003eAgitate, allow 15 to 30 minutes dwell time, and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water, or wet-extract with a 1:100 Rinse Pro solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e spot removal on marble and other porous hard surfaces can also be achieved by applying one scoop of Oxyboost Plus powder directly to the surface. Apply a little hot water, then use a non-scratch scourer to mix and scrub the spot until a paste forms. Allow 10 to 15 minutes dwell time. Scrub again and rinse with clean water.\u003c\/p\u003e\n\u003ch3\u003eGarments and loose furnishings\u003c\/h3\u003e\n\u003cp\u003eEnsure items are water-washable — check for special washing directions from the manufacturer first.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix a soak solution of 200 to 500 ml \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e per 10 litres of warm or hot water, or commercial laundry liquid or powder. Add 50 to 100 g Oxyboost Plus. Mix well.\u003c\/li\u003e\n\u003cli\u003eSoak affected garments and loose furnishings for 1 to 4 hours.\u003c\/li\u003e\n\u003cli\u003eRinse well in clean warm water.\u003c\/li\u003e\n\u003cli\u003eMachine-washable garments should then be laundered as usual. Loose furnishings should be rinsed in a warm 1:200 Rinse Pro solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eOur page has always carried “Safety profile: Class 5.1 Oxidising Agent”, which is correct. \u003cstrong\u003eBut a transport class tells you nothing about PPE, first aid, or the fire risk this product carries on a job site.\u003c\/strong\u003e The full classification is below.\u003c\/p\u003e\n\u003cp\u003eOxyboost Plus is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH272\u003c\/strong\u003e — may intensify fire; oxidiser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH302\u003c\/strong\u003e — harmful if swallowed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH335\u003c\/strong\u003e — may cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003eAUH: repeated exposure may cause skin dryness and cracking\u003c\/li\u003e\n\u003cli\u003eGHS: \u003cstrong\u003eOxidising Solid Category 2\u003c\/strong\u003e; Acute Toxicity (Oral) Cat 4; Skin Corrosion\/Irritation Cat 2; Serious Eye Damage Cat 1; STOT SE Cat 3\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e1Y\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e10.0\u003c\/strong\u003e — our page previously said 11\u003c\/li\u003e\n\u003cli\u003eComposition: \u003cstrong\u003esodium percarbonate, greater than 60%\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN3378, Class 5.1 oxidising solid, Packing Group II\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIt is a powder, and that changes how you handle it.\u003c\/strong\u003e H335 and H318 both apply to airborne dust. Decant slowly and low, do not tip from height, and do not scoop into the airflow of a fan or air mover. Wear the goggles when opening the pail — a puff of alkaline oxidiser dust in the eye is the realistic injury with this product.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles and a full face shield\u003c\/strong\u003e, neoprene chemical protective gloves, overalls and a PVC apron, with access to an eyewash unit and a safety shower.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush continuously with running water for at least 15 minutes. Obtain medical attention without delay — H318 means the damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with running water. Seek medical attention if irritation develops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e H302 applies. Rinse the mouth, do not induce vomiting, and seek medical advice.\u003c\/p\u003e\n\u003ch2\u003e🔴 Fire Risk — the part most people do not know\u003c\/h2\u003e\n\u003cp\u003eOxyboost Plus is an \u003cstrong\u003eoxidiser\u003c\/strong\u003e. It does not burn, but it makes other things burn far more readily, and it can start a fire with no ignition source at all.\u003c\/p\u003e\n\u003cp\u003eThe SDS states that \u003cstrong\u003econtact with combustible material — wood, paper, cloth, sawdust — may produce spontaneous combustion or violent decomposition.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn a job site that means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not sweep spilled powder into a bin with paper, cloth or sawdust.\u003c\/strong\u003e Collect it separately and flush the area with plenty of water.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not store the pail on or near timber offcuts, rags, cardboard or absorbent granules.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not leave cloths or towels loaded with concentrated powder or paste balled up in a bucket or van.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the lid closed and keep it dry.\u003c\/strong\u003e Moisture starts the oxygen release, and a sealed container of reacting percarbonate will pressurise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the same hazard family as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e, our 50% hydrogen peroxide, and it deserves the same respect.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid, Chlorine, Deodorisers or Enzymes\u003c\/h2\u003e\n\u003cp\u003eThe four exclusions already on this page are correct, and the SDS explains why. Oxyboost Plus is incompatible with \u003cstrong\u003eacids, reducing agents, alkalis, organic solvents, metallic salts and combustible organic matter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcids\u003c\/strong\u003e — destroy the alkaline percarbonate chemistry and can generate heat and rapid gas evolution. Never add to \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eGrout Restore 60\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or any acid rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChlorine\u003c\/strong\u003e — never combine with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eChlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e, pool chlorine or any hypochlorite. Two oxidisers together give you no extra performance and an unpredictable reaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnzyme products\u003c\/strong\u003e — the oxidiser destroys the enzyme. You lose both products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeodorisers\u003c\/strong\u003e — oxidised fragrance chemistry gives unpredictable and often unpleasant results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvents and organic matter\u003c\/strong\u003e — combustion risk, as above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMetallic salts are named as incompatible.\u003c\/strong\u003e The surface list above includes metals, and that is correct for the diluted working solution on a sound surface — but avoid contact between the neat powder and rusted or corroded metal, which catalyses rapid decomposition.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP446.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm\u003c\/td\u003e\n\u003ctd\u003eWhite powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eSodium percarbonate, greater than 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e10 to 20 g per litre; up to 30 g\/L heavy duty; 50 to 100 g per 10 L soak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage per pack\u003c\/td\u003e\n\u003ctd\u003e50 to 100 litres of working solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolution life\u003c\/td\u003e\n\u003ctd\u003eUse within 30 minutes of mixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e15 to 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH272, H302, H315, H318, H335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e1Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN3378, Class 5.1 oxidising solid, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDo not mix with\u003c\/td\u003e\n\u003ctd\u003eAcids, chlorine products, deodorisers, enzyme products, reducing agents, organic solvents, metallic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeep away from\u003c\/td\u003e\n\u003ctd\u003eWood, paper, cloth, sawdust and other combustible material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 26 May 2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Actichem’s current published sheet for this product is dated May 2022 and is the oldest in their range. We have asked them for a current version and will update this page when it is issued.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eActichem Oxyboost Plus 4.5 kg\u003c\/a\u003e — the same product in the production pail\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e — 50% hydrogen peroxide, liquid. Same oxidising role, higher hazard, and a Class 5.1 liquid rather than a solid.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-20-ltr\"\u003eActichem Rinse Pro\u003c\/a\u003e — the 1:100 rinse specified in the methods above\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — the soak partner for garments and loose furnishings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202207-_Actichem-Oxyboost-Plus-AP446.pdf\"\u003eActichem Oxyboost Plus Safety Data Sheet — version 2.3, issued 26 May 2022\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\u003cp\u003eA tub of Oxyboost doesn't mean every carpet needs an oxidiser. Use it for a job and fibre that actually suit it, measure the dose and mix fresh enough for the treatment to work. Don't pour it into a mystery bucket or combine it with other chemicals to 'give it a kick'.\u003c\/p\u003e\u003chr\u003e\n\u003cp\u003eSKU: AP446.01\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorking a fire job and unsure whether to boost with Oxyboost Plus or use a peroxide liquid? Contact Carpet Cleaners Warehouse. The right oxidiser depends on the substrate, the soil and how long you have on site.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"1KG","offer_id":20928449413179,"sku":"AP446.01","price":31.68,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Oxyboost-Plus-1kg.jpg?v=1780550930"},{"product_id":"hydramaster-grungeslayer-prespray-2-95kg","title":"HydraMaster GrungeSlayer Cleaner 2.9kg","description":"\u003ch2\u003eHydramaster GrungeSlayer... Cleaning Agent for Trashed \u0026amp; Grungy Tile\/Grout or Concrete Floors\u003c\/h2\u003e\n\u003ch2\u003eGrungeSlayer is a powder prespray agent to be applied on neglected tile and concrete floors that have a high level of grunge, soil and grease build-up. It slays the grime and restores the floor to a clean and shiny condition.\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"hydramaster grungeslayer\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/grungeslayerbefroreafter.png?v=1611712374\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSlay Grungy and Soiled Floors, GRUNGESLAYER is a powder prespray agent to be applied prior to cleaning with a hard surface extraction wand or tool.\u003cbr\u003e\u003cbr\u003eSometimes when you are asked to restoratively clean a neglected, heavily soiled hard surface floor, you simply have to slay the “ beast” – The beast can take many forms but is comprised of a heavy build-up of grime, grease, oil and soil that is literally sucking the life and appearance out of a flooring investment. That is what GrungeSlayer is all about, making you the hero by slaying the beast!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrungeSlayer works to effectively as a powder prespray or as a booster\/additive to clean and restore reglected tile or concrete.\u003c\/li\u003e\n\u003cli\u003eWorks best using a rotary agitation hard surface tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInformation sheets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHydraMaster’s product information sheet and product label for this item were previously linked here. Those files are no longer online — the host they were on has gone, not just the documents — so we have removed the links rather than leave you clicking on nothing. We have asked HydraMaster for current copies to host ourselves.\u003c\/p\u003e\n\u003cp\u003eThe Safety Data Sheet below is current and hosted by us. \u003cstrong\u003eIf you need the product information sheet or the label before we have them, ask us and we will get them from HydraMaster for you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I8M8i0CH85k\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eThe Australian safety data sheet issued by Aberford Holdings (importer, trading as Carpet Cleaners Warehouse) classifies GrungeSlayer as a hazardous chemical and dangerous goods: signal word \u003cstrong\u003eDanger\u003c\/strong\u003e; may be corrosive to metals; causes severe skin burns and eye damage (sodium hydroxide and sodium metasilicate; 1% solution pH 12); may cause an allergic skin reaction; may cause respiratory irritation; toxic to aquatic life with long lasting effects. Transport: UN 3262, Corrosive solid, basic, inorganic, n.o.s., Class 8, Packing Group I. Avoid breathing dust, wear chemical-resistant gloves, goggles and a face shield, add the powder to water (never water to powder), keep away from aluminium and galvanised fittings, and read the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/950-156_GrungeSlayer_Cleaner_SDS_AU_31102026.pdf\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before first use. For poisons advice, call 13 11 26.\u003c\/p\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/950-156_GrungeSlayer_Cleaner_SDS_AU_31102026.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – GrungeSlayer Cleaner (Australian edition, Aberford Holdings, version 1.0, 31 October 2026) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202211-Hydramaster-Grungeslayer-950-156.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer's Safety Data Sheet – GrungeSlayer Cleaner (HydraMaster, United States edition, revised 7 November 2022) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Australian sheet is prepared by Aberford Holdings from the manufacturer's US edition and reflects Aberford's own classification under the Australian WHS Regulations and the ADG Code. It is reviewed at least every five years, or sooner if the manufacturer revises the source sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/collections\/dangerous-goods-shipping-surcharges-apply\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/CCW_Dangerous_Goods_Limited_Quantity_Mark_png.jpg\" alt=\"Dangerous goods limited quantity mark\" width=\"31\" height=\"29\"\u003e\u003cspan\u003eDG Shipping Surcharge Applies\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hydramaster-hydraboost-ct-2-95kg\"\u003eHydraMaster HydraBoost CT 2.95kg\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hydramaster-hydrasolv-hard-surface-cleaner-3-8ltr\"\u003eHydraMaster HydraSolv Hard Surface Cleaner 3.8ltr\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Hydramaster","offers":[{"title":"2.95KG","offer_id":37912881692825,"sku":"950-156-B","price":99.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/HydraMaster-GrungeSlayer-Cleaner-2_9kg.jpg?v=1780551149"},{"product_id":"actichem-tile-and-grout-cream-5l","title":"Actichem Tile and Grout Cream 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Tile \u0026amp; Grout Cream is a thickened solvent gel for the hard-surface jobs that water-based cleaners cannot solve — factory wax coatings on porcelain, grout haze, ground-in grease and oil, paint spots, gum, cosmetics and sticky residues on stone, tile, concrete and masonry.\u003c\/p\u003e\n\u003cp\u003eTwo things make it work. The first is the solvent blend: heavy hydrotreated naphtha and d-limonene, which dissolve waxes, oils and adhesive residues that detergents simply cannot reach. The second is that it is a gel rather than a liquid, so it stays where you put it — including on a vertical surface — and keeps working through a 10 to 20 minute dwell instead of running off. A fine micro-abrasive gives it mechanical bite for grout haze.\u003c\/p\u003e\n\u003cp\u003eIt is a genuinely capable product. It is also, on Actichem's own current safety data sheet, the most hazardous chemical in Actichem's hard-surface range. Please read the safety section below before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do I need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 ml (AP152.005)\u003c\/strong\u003e — spot work, grout haze on a single job, vertical and detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 litre (AP152.05)\u003c\/strong\u003e — full-floor wax stripping, restoration work and regular commercial use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth packs are the same formulation. Note that Actichem's dangerous goods exemption applies to packs of 5 litres or less, which covers both pack sizes offered here.\u003c\/p\u003e\n\u003ch2\u003eImportant Safety Correction\u003c\/h2\u003e\n\u003cp\u003eUntil this page was reviewed, Carpet Cleaners Warehouse described Tile \u0026amp; Grout Cream as non-hazardous, with ingredients \"selected for their low hazard and non-toxic safety profiles\". \u003cstrong\u003eThat was wrong, and we have corrected it.\u003c\/strong\u003e If you have bought this product from us previously and wrote your risk assessment on that basis, please read this section and revise it.\u003c\/p\u003e\n\u003cp\u003eActichem's current safety data sheet — version 2.3, issued 9 July 2025 — classifies Tile \u0026amp; Grout Cream as follows.\u003c\/p\u003e\n\u003ch3\u003eClassification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH360D — May damage the unborn child.\u003c\/strong\u003e Toxic to Reproduction Category 1B. This is the classification that matters most and it is driven by the N-methyl-2-pyrrolidone content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH304 — May be fatal if swallowed and enters airways.\u003c\/strong\u003e Aspiration Hazard Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH226 — Flammable liquid and vapour.\u003c\/strong\u003e Flammable Liquids Category 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317 — May cause an allergic skin reaction.\u003c\/strong\u003e Skin Sensitiser Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315 — Causes skin irritation.\u003c\/strong\u003e Skin Corrosion\/Irritation Category 2.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePoisons Schedule 5.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComposition\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNaphtha, petroleum, heavy, hydrotreated (CAS 64742-48-9)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ed-Limonene (CAS 5989-27-5)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eN-methyl-2-pyrrolidone (CAS 872-50-4)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat this means in practice\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkers who are pregnant, or who may become pregnant, should not use this product.\u003c\/strong\u003e H360D is a reproductive toxicity classification, not a precaution. N-methyl-2-pyrrolidone is listed in Schedules 5 and 6 of the Poisons Standard. If your crew includes anyone in that position, plan the job around it — this is a substitution decision, not a personal-protective-equipment decision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation is essential, not advisory.\u003c\/strong\u003e Actichem specifies local exhaust ventilation where natural ventilation is poor, and a gas filter for organic compounds or a combination vapour\/aerosol filter to AS\/NZS 1715 and 1716. Small bathrooms, unventilated commercial kitchens and enclosed plant rooms are exactly where this product is most often used and where the exposure risk is highest. Open the space up, or use forced ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreat it as flammable.\u003c\/strong\u003e H226. Keep it away from heat, sparks, open flame and hot surfaces. Do not use it near a gas hot water service pilot light, a running burnisher motor, or hot work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317 is a sensitiser warning.\u003c\/strong\u003e Repeated skin contact can produce an allergic reaction that then recurs at much lower exposures. Once someone is sensitised to d-limonene, they stay sensitised.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever siphon or transfer by mouth, and never decant into a drink container.\u003c\/strong\u003e H304 means a small quantity aspirated into the lungs can be fatal. Keep it in its labelled container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye and face protection:\u003c\/strong\u003e safety glasses with side shields or chemical goggles. \u003cstrong\u003eBody:\u003c\/strong\u003e overalls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix\u003c\/strong\u003e with oxidising agents, strong acids, nitrates or chlorine bleach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eActichem's own product listing now also carries the DANGER classification. Our previous description was simply out of date.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Choose It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt removes factory wax from porcelain.\u003c\/strong\u003e This is the job it is best known for. New porcelain tile often arrives with a protective wax coating that ordinary cleaners smear rather than remove, leaving a patchy sheen that shows up under raking light. Tile \u0026amp; Grout Cream dissolves it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrout haze.\u003c\/strong\u003e The micro-abrasive content lets it cut cementitious haze without the acid wash that would attack the grout itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stays put.\u003c\/strong\u003e A gel body means full dwell time on vertical surfaces — shower walls, splashbacks, feature stone, graffiti on masonry — where a liquid degreaser would simply run to the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent power without an aggressive pH.\u003c\/strong\u003e Because the cleaning is done by solvents rather than caustic, it can be used on marble, limestone and other acid- and alkali-sensitive stone that a strong degreaser would etch or dull.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt penetrates films.\u003c\/strong\u003e The formulation separates soil and wax films from the substrate so they can be flushed away, rather than emulsifying them into a slurry that redeposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFactory wax coating removal from porcelain and ceramic tile\u003c\/li\u003e\n\u003cli\u003eGrout haze removal from tile and stone\u003c\/li\u003e\n\u003cli\u003eGrease, oil and grime removal from natural stone, polished concrete and tile\u003c\/li\u003e\n\u003cli\u003eStain removal from stone, concrete and tile — sticky residues, paint spots, chewing gum, food and drink staining, cosmetics\u003c\/li\u003e\n\u003cli\u003eGraffiti and adhesive residue on masonry and vertical surfaces\u003c\/li\u003e\n\u003cli\u003eDeep-set grime and grease on marble, fine stone, porcelain and tile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous location. Ready to use — do not dilute.\u003c\/p\u003e\n\u003ch3\u003eFloor surfaces\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVentilate the area before you start.\u003c\/li\u003e\n\u003cli\u003eApply Tile \u0026amp; Grout Cream directly to the affected area.\u003c\/li\u003e\n\u003cli\u003eScrub thoroughly with a slow-speed scrubber fitted with a suitable nylon pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 20 minutes dwell time for penetration and lifting of oily soils or wax films. Do not let it dry out.\u003c\/li\u003e\n\u003cli\u003eScrub again, then rinse well with clean water or a detergent solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eVertical surfaces\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply directly to the surface, or onto a non-scratch nylon scouring pad.\u003c\/li\u003e\n\u003cli\u003eSpread over the surface and agitate.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes dwell time.\u003c\/li\u003e\n\u003cli\u003eScrub or agitate, then rinse well with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eAfter the job\u003c\/h3\u003e\n\u003cp\u003eRinse thoroughly. Solvent residue left on a floor will attract soil, can soften some sealers and coatings, and will interfere with any sealer applied afterwards. If you intend to seal the surface, allow it to dry completely and confirm the sealer manufacturer's requirements before application.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility and Cautions\u003c\/h2\u003e\n\u003cp\u003eActichem lists natural stone, ceramic and porcelain, concrete and masonry, rubber and vinyl as suitable surfaces. Some practical qualifications are worth stating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt will remove sealers and coatings as well as wax.\u003c\/strong\u003e That is the same chemistry working. If the floor is sealed and you want to keep the sealer, this is the wrong product. If you are stripping to re-seal, it is the right one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVinyl and rubber:\u003c\/strong\u003e pre-test. Solvent gels can soften some plasticised vinyl and can lift the pattern layer on cheaper sheet vinyl with extended dwell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolished stone:\u003c\/strong\u003e the micro-abrasive is fine, but on a high-gloss honed or polished finish it should be worked with a soft nylon pad rather than an aggressive one, and pre-tested in a hidden area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePainted and powder-coated surfaces:\u003c\/strong\u003e it removes paint spots, which means it can also attack the paint you want to keep. Keep it off skirtings, painted door frames and coated aluminium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjacent carpet and soft furnishings:\u003c\/strong\u003e mask them. A solvent gel on carpet is a difficult problem to reverse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing it in an unventilated room.\u003c\/strong\u003e This is the single most common mistake with this product and the most consequential one, given the classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssuming pH 6 means mild.\u003c\/strong\u003e Actichem publishes a pH of 6 for this product on their marketing material, while the safety data sheet records pH as not applicable — which is correct, because the product is a water-immiscible solvent gel with a relative density of 0.89. There is no meaningful aqueous pH to measure. Do not use the pH figure as a guide to how gentle the product is; the hazard here comes from the solvents, not from acidity or alkalinity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLetting it dry on the surface.\u003c\/strong\u003e Dwell means damp, not dry. A dried film is harder to rinse and can leave a residue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkipping the rinse.\u003c\/strong\u003e Solvent residue attracts soil and defeats any sealer applied afterwards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing it as a general-purpose floor cleaner.\u003c\/strong\u003e It is a stripping and spot-removal product. For routine maintenance cleaning of sealed stone, use a neutral cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring it near ignition sources or in a hot vehicle\u003c\/strong\u003e in an Australian summer. H226.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP152\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAP152.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite gel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eOrange citrus (from the d-limonene content)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e0.89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility in water\u003c\/td\u003e\n\u003ctd\u003eImmiscible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — solvent gel, not an aqueous solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 – 20 minutes (floors); 5 – 10 minutes (vertical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH226, H304, H315, H317, H360D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons Schedule\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport in packs of 5 litres or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eOxidising agents, strong acids, nitrates, chlorine bleach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActichem's safety data sheet records the flash point as \"not available\" while classifying the product as a Category 3 flammable liquid, which implies a flash point between 23 °C and 60 °C. We have asked Actichem to publish the measured value. Until they do, treat the product as flammable and store it accordingly.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does a citrus-smelling cream carry a DANGER classification?\u003c\/h3\u003e\n\u003cp\u003eThe citrus smell is d-limonene, which makes up 30 to 60% of the product. It is a natural terpene solvent, but \"natural\" and \"low hazard\" are not the same thing — d-limonene is a skin sensitiser and an aspiration hazard. The reproductive toxicity classification comes from the N-methyl-2-pyrrolidone content, which is present at under 10% and carries no odour at all. A pleasant smell tells you nothing useful about a product's hazard profile.\u003c\/p\u003e\n\u003ch3\u003eIs there a safer alternative for routine tile and grout cleaning?\u003c\/h3\u003e\n\u003cp\u003eYes, and for most maintenance work you should be using one. Tile \u0026amp; Grout Cream is a stripping and problem-solving product, not a routine cleaner. For regular cleaning of sealed stone and tile, Actichem Stone Soap or a neutral detergent is the right tool. Reserve this product for wax removal, grout haze and stains that nothing milder will shift.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on marble?\u003c\/h3\u003e\n\u003cp\u003eYes — it is one of the reasons the product exists. Because it works by solvent action rather than acid or caustic, it does not etch calcareous stone the way an acidic tile cleaner would. Pre-test on polished finishes and use a soft pad.\u003c\/p\u003e\n\u003ch3\u003eWill it damage grout?\u003c\/h3\u003e\n\u003cp\u003eIt is not acidic, so it does not attack cementitious grout the way an acid haze remover can. It will, however, remove a grout sealer along with everything else. Plan to re-seal.\u003c\/p\u003e\n\u003ch3\u003eWhat ventilation is actually enough?\u003c\/h3\u003e\n\u003cp\u003eActichem specifies local exhaust ventilation where natural ventilation is poor, and respiratory protection with an organic vapour filter to AS\/NZS 1715 and 1716. As a working rule: if you can smell it strongly and the room is enclosed, ventilation is not adequate. Open external doors and windows, use a fan to move air out of the space rather than around it, and take breaks outside the area.\u003c\/p\u003e\n\u003ch3\u003eCan it be diluted to make it go further or make it milder?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a gel formulation supplied ready to use. Adding water to a water-immiscible product breaks the gel and does not reduce the hazard of the solvent that remains.\u003c\/p\u003e\n\u003ch3\u003eDoes the 5 litre pack attract a dangerous goods surcharge?\u003c\/h3\u003e\n\u003cp\u003eActichem's safety data sheet states the product is not regulated for transport of dangerous goods in packs of 5 litres or less, which covers both pack sizes we supply. If a shipping surcharge appears at checkout that you believe is incorrect, contact us before ordering.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-500ml\"\u003eActichem Tile \u0026amp; Grout Cream 500 ml\u003c\/a\u003e — the same formulation in the other pack size. Identical classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-soap-5-ltr\"\u003eActichem Stone Soap\u003c\/a\u003e — the routine maintenance cleaner for sealed stone. Use this for regular work and keep Tile \u0026amp; Grout Cream for the problems.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-sealer-pro-5l\"\u003eActichem Stone Sealer Pro\u003c\/a\u003e — the sealer to apply after stripping. Non-hazardous, water based.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — neutral cleaner recommended for ongoing maintenance of sealed surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eTile \u0026amp; Grout Cream does a job that nothing milder will do: it strips factory wax, grout haze, ground-in grease and adhesive residue from stone, tile, concrete and masonry, on horizontal and vertical surfaces alike, without the acid or caustic attack that would damage the substrate. That capability is worth having in the van.\u003c\/p\u003e\n\u003cp\u003eIt is also a Category 1B reproductive toxicant, an aspiration hazard and a flammable liquid, and it was previously listed on this page as non-hazardous. It is the right product for a specific set of jobs, used with proper ventilation, by someone who has read the safety data sheet. It is the wrong product for routine floor maintenance and the wrong product for anyone who is or may become pregnant.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-TG-CreamAP152.pdf\"\u003eActichem Tile \u0026amp; Grout Cream Safety Data Sheet — version 2.3, issued 9 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf your safe work method statement for this product was written on the basis that it was non-hazardous, it needs to be redone.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP152.05\u003c\/p\u003e\n\u003cp\u003eNot sure whether you need a stripper or a maintenance cleaner? Contact Carpet Cleaners Warehouse before you order. On most hard-floor jobs the milder product is the correct one — and where it is not, we would rather you knew what you were handling.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"EACH","offer_id":44122346455253,"sku":"AP152.05","price":342.76,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Tile-and-Grout-Cream-5L.jpg?v=1780551501"},{"product_id":"actichem-oxyboost-plus-4-5-kg","title":"Actichem Oxyboost Plus 4.5 kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Oxyboost Plus is a super-concentrate oxidising compound designed for use both as an additive to cleaning solutions and as a stand-alone product. It provides powerful oxidising activity to cleaning solutions, with particular applications in fire restoration, stain removal and deodorising.\u003c\/p\u003e\n\u003cp\u003eIt derives its oxidising capability from \u003cstrong\u003epotentiated sodium percarbonate\u003c\/strong\u003e, which provides maximum oxygen release even at ambient temperatures. The ready-to-use solution is alkaline. It therefore offers unique performance for both hard and soft surface cleaning applications where the oxidising ability of hydrogen peroxide is limited.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStain removal\u003c\/strong\u003e — powerful on tannin and colour stains such as soft drink, cordial, grass, blood and many other organic stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning booster\u003c\/strong\u003e — adding Oxyboost Plus to your cleaning solution significantly enhances results, as its oxidising and destaining power removes many soils that would otherwise be left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightens colours\u003c\/strong\u003e — enhances and brightens the colours of fabrics and carpets, and overcomes dullness and greying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFibre safe\u003c\/strong\u003e — suitable on all synthetic and most delicate fibres and fabrics, including coloured fabrics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser friendly\u003c\/strong\u003e — low-odour formula.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable on practically all water-cleanable surfaces, including painted walls, ceilings, carpets, soft furnishings, lacquered wood, metals, tiles, lino, natural stone and concrete. Care should be taken with pH-sensitive substrates such as natural fibres. A neutralising acid rinse after cleaning is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on the acid rinse.\u003c\/strong\u003e Do that as a separate, later step on a rinsed surface — never by adding acid to an Oxyboost solution. See the reactivity section below.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity. Best performance is obtained in hot solutions.\u003c\/p\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdd \u003cstrong\u003e10 to 20 g\u003c\/strong\u003e Oxyboost Plus per litre of water or ready-to-use cleaning solution.\u003c\/li\u003e\n\u003cli\u003eFor heavy-duty conditions, up to \u003cstrong\u003e30 g\/L\u003c\/strong\u003e can be added.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOxyboost Plus must not be added to acidic solutions, deodorisers, chlorine or enzyme products.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIt can be added to fire restoration detergents, carpet and upholstery presprays, alkaline tile-cleaning detergents, and water-based degreasers.\u003c\/li\u003e\n\u003cli\u003eWarm or hot water and cleaning solutions will improve performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir well and use the solution within 30 minutes.\u003c\/strong\u003e Once mixed, the oxygen is being released whether you use it or not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHard surface and carpet cleaning\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCover areas not being cleaned. Only apply solution to an area that can be cleaned and rinsed within 30 to 40 minutes.\u003c\/li\u003e\n\u003cli\u003eApply the solution to a workable area using a sprayer, sponge or scrubber machine.\u003c\/li\u003e\n\u003cli\u003eAgitate and allow 15 to 30 minutes dwell time.\u003c\/li\u003e\n\u003cli\u003eRinse the surface thoroughly with clean water. Carpets and soft furnishings are best rinsed using wet extraction equipment with a 1:100 \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-20-ltr\"\u003eRinse Pro\u003c\/a\u003e solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpot removal from carpets and fine stone\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAdd Oxyboost Plus to a warm or hot prespray or tile cleaning solution — \u003cstrong\u003enon-acidic\u003c\/strong\u003e. Neutral pH product solutions generally work best. The solution can also be made up with water alone.\u003c\/li\u003e\n\u003cli\u003eApply to the affected area.\u003c\/li\u003e\n\u003cli\u003eAgitate, allow 15 to 30 minutes dwell time, and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water, or wet-extract with a 1:100 Rinse Pro solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e spot removal on marble and other porous hard surfaces can also be achieved by applying one scoop of Oxyboost Plus powder directly to the surface. Apply a little hot water, then use a non-scratch scourer to mix and scrub the spot until a paste forms. Allow 10 to 15 minutes dwell time. Scrub again and rinse with clean water.\u003c\/p\u003e\n\u003ch3\u003eGarments and loose furnishings\u003c\/h3\u003e\n\u003cp\u003eEnsure items are water-washable — check for special washing directions from the manufacturer first.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix a soak solution of 200 to 500 ml \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e per 10 litres of warm or hot water, or commercial laundry liquid or powder. Add 50 to 100 g Oxyboost Plus. Mix well.\u003c\/li\u003e\n\u003cli\u003eSoak affected garments and loose furnishings for 1 to 4 hours.\u003c\/li\u003e\n\u003cli\u003eRinse well in clean warm water.\u003c\/li\u003e\n\u003cli\u003eMachine-washable garments should then be laundered as usual. Loose furnishings should be rinsed in a warm 1:200 Rinse Pro solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eOur page has always carried “Safety profile: Class 5.1 Oxidising Agent”, which is correct. \u003cstrong\u003eBut a transport class tells you nothing about PPE, first aid, or the fire risk this product carries on a job site.\u003c\/strong\u003e The full classification is below.\u003c\/p\u003e\n\u003cp\u003eOxyboost Plus is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH272\u003c\/strong\u003e — may intensify fire; oxidiser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH302\u003c\/strong\u003e — harmful if swallowed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH335\u003c\/strong\u003e — may cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003eAUH: repeated exposure may cause skin dryness and cracking\u003c\/li\u003e\n\u003cli\u003eGHS: \u003cstrong\u003eOxidising Solid Category 2\u003c\/strong\u003e; Acute Toxicity (Oral) Cat 4; Skin Corrosion\/Irritation Cat 2; Serious Eye Damage Cat 1; STOT SE Cat 3\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e1Y\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e10.0\u003c\/strong\u003e — our page previously said 11\u003c\/li\u003e\n\u003cli\u003eComposition: \u003cstrong\u003esodium percarbonate, greater than 60%\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN3378, Class 5.1 oxidising solid, Packing Group II\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIt is a powder, and that changes how you handle it.\u003c\/strong\u003e H335 and H318 both apply to airborne dust. Decant slowly and low, do not tip from height, and do not scoop into a fan or air mover’s airflow. Wear the goggles when opening the pail — a puff of alkaline oxidiser dust in the eye is the realistic injury with this product.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles and a full face shield\u003c\/strong\u003e, neoprene chemical protective gloves, overalls and a PVC apron, with access to an eyewash unit and a safety shower.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush continuously with running water for at least 15 minutes. Obtain medical attention without delay — H318 means the damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with running water. Seek medical attention if irritation develops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e H302 applies. Rinse the mouth, do not induce vomiting, and seek medical advice.\u003c\/p\u003e\n\u003ch2\u003e🔴 Fire Risk — the part most people do not know\u003c\/h2\u003e\n\u003cp\u003eOxyboost Plus is an \u003cstrong\u003eoxidiser\u003c\/strong\u003e. It does not burn, but it makes other things burn far more readily, and it can start a fire with no ignition source at all.\u003c\/p\u003e\n\u003cp\u003eThe SDS states that \u003cstrong\u003econtact with combustible material — wood, paper, cloth, sawdust — may produce spontaneous combustion or violent decomposition.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn a job site that means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not sweep spilled powder into a bin with paper, cloth or sawdust.\u003c\/strong\u003e Collect it separately and flush the area with plenty of water.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not store the pail on or near timber offcuts, rags, cardboard or absorbent granules.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not leave cloths or towels loaded with concentrated powder or paste balled up in a bucket or van.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the lid closed and keep it dry.\u003c\/strong\u003e Moisture starts the oxygen release, and a sealed container of reacting percarbonate will pressurise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the same hazard family as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e, our 50% hydrogen peroxide, and it deserves the same respect.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid, Chlorine, Deodorisers or Enzymes\u003c\/h2\u003e\n\u003cp\u003eThe four exclusions already on this page are correct, and the SDS explains why. Oxyboost Plus is incompatible with \u003cstrong\u003eacids, reducing agents, alkalis, organic solvents, metallic salts and combustible organic matter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcids\u003c\/strong\u003e — destroy the alkaline percarbonate chemistry and can generate heat and rapid gas evolution. Never add to \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eGrout Restore 60\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or any acid rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChlorine\u003c\/strong\u003e — never combine with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eChlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e, pool chlorine or any hypochlorite. Two oxidisers together give you no extra performance and an unpredictable reaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnzyme products\u003c\/strong\u003e — the oxidiser destroys the enzyme. You lose both products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeodorisers\u003c\/strong\u003e — oxidised fragrance chemistry gives unpredictable and often unpleasant results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvents and organic matter\u003c\/strong\u003e — combustion risk, as above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMetallic salts are named as incompatible.\u003c\/strong\u003e The surface list above includes metals, and that is correct for the diluted working solution on a sound surface — but avoid contact between the neat powder and rusted or corroded metal, which catalyses rapid decomposition.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP446.045\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm\u003c\/td\u003e\n\u003ctd\u003eWhite powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eSodium percarbonate, greater than 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e10 to 20 g per litre; up to 30 g\/L heavy duty; 50 to 100 g per 10 L soak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolution life\u003c\/td\u003e\n\u003ctd\u003eUse within 30 minutes of mixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e15 to 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH272, H302, H315, H318, H335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e1Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN3378, Class 5.1 oxidising solid, Packing Group II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDo not mix with\u003c\/td\u003e\n\u003ctd\u003eAcids, chlorine products, deodorisers, enzyme products, reducing agents, organic solvents, metallic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeep away from\u003c\/td\u003e\n\u003ctd\u003eWood, paper, cloth, sawdust and other combustible material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 26 May 2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Actichem’s current published sheet for this product is dated May 2022 and is the oldest in their range. We have asked them for a current version and will update this page when it is issued.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eActichem Oxyboost Plus 1 kg — the same product in the smaller pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e — 50% hydrogen peroxide, liquid. Same oxidising role, higher hazard, and a Class 5.1 liquid rather than a solid.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-20-ltr\"\u003eActichem Rinse Pro\u003c\/a\u003e — the 1:100 rinse specified in the methods above\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — the soak partner for garments and loose furnishings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202207-_Actichem-Oxyboost-Plus-AP446.pdf\"\u003eActichem Oxyboost Plus Safety Data Sheet — version 2.3, issued 26 May 2022\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\u003cp\u003eA tub of Oxyboost doesn't mean every carpet needs an oxidiser. Use it for a job and fibre that actually suit it, measure the dose and mix fresh enough for the treatment to work. Don't pour it into a mystery bucket or combine it with other chemicals to 'give it a kick'.\u003c\/p\u003e\u003chr\u003e\n\u003cp\u003eSKU: AP446.045\u003c\/p\u003e\n\u003cp\u003eWorking a fire job and unsure whether to boost with Oxyboost Plus or use a peroxide liquid? Contact Carpet Cleaners Warehouse. The right oxidiser depends on the substrate, the soil and how long you have on site.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"4.5KG","offer_id":44309998534869,"sku":"AP446.045","price":89.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Oxyboost-Plus-4_5-kg.jpg?v=1780551557"},{"product_id":"actichem-tile-and-grout-cream-500ml","title":"Actichem Tile and Grout Cream 500ml","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Tile \u0026amp; Grout Cream is a thickened solvent gel for the hard-surface jobs that water-based cleaners cannot solve — factory wax coatings on porcelain, grout haze, ground-in grease and oil, paint spots, gum, cosmetics and sticky residues on stone, tile, concrete and masonry.\u003c\/p\u003e\n\u003cp\u003eTwo things make it work. The first is the solvent blend: heavy hydrotreated naphtha and d-limonene, which dissolve waxes, oils and adhesive residues that detergents simply cannot reach. The second is that it is a gel rather than a liquid, so it stays where you put it — including on a vertical surface — and keeps working through a 10 to 20 minute dwell instead of running off. A fine micro-abrasive gives it mechanical bite for grout haze.\u003c\/p\u003e\n\u003cp\u003eIt is a genuinely capable product. It is also, on Actichem's own current safety data sheet, the most hazardous chemical in Actichem's hard-surface range. Please read the safety section below before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do I need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 ml (AP152.005)\u003c\/strong\u003e — spot work, grout haze on a single job, vertical and detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 litre (AP152.05)\u003c\/strong\u003e — full-floor wax stripping, restoration work and regular commercial use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth packs are the same formulation. Note that Actichem's dangerous goods exemption applies to packs of 5 litres or less, which covers both pack sizes offered here.\u003c\/p\u003e\n\u003ch2\u003eImportant Safety Correction\u003c\/h2\u003e\n\u003cp\u003eUntil this page was reviewed, Carpet Cleaners Warehouse described Tile \u0026amp; Grout Cream as non-hazardous, with ingredients \"selected for their low hazard and non-toxic safety profiles\". \u003cstrong\u003eThat was wrong, and we have corrected it.\u003c\/strong\u003e If you have bought this product from us previously and wrote your risk assessment on that basis, please read this section and revise it.\u003c\/p\u003e\n\u003cp\u003eActichem's current safety data sheet — version 2.3, issued 9 July 2025 — classifies Tile \u0026amp; Grout Cream as follows.\u003c\/p\u003e\n\u003ch3\u003eClassification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH360D — May damage the unborn child.\u003c\/strong\u003e Toxic to Reproduction Category 1B. This is the classification that matters most and it is driven by the N-methyl-2-pyrrolidone content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH304 — May be fatal if swallowed and enters airways.\u003c\/strong\u003e Aspiration Hazard Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH226 — Flammable liquid and vapour.\u003c\/strong\u003e Flammable Liquids Category 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317 — May cause an allergic skin reaction.\u003c\/strong\u003e Skin Sensitiser Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315 — Causes skin irritation.\u003c\/strong\u003e Skin Corrosion\/Irritation Category 2.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePoisons Schedule 5.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComposition\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNaphtha, petroleum, heavy, hydrotreated (CAS 64742-48-9)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ed-Limonene (CAS 5989-27-5)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eN-methyl-2-pyrrolidone (CAS 872-50-4)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat this means in practice\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkers who are pregnant, or who may become pregnant, should not use this product.\u003c\/strong\u003e H360D is a reproductive toxicity classification, not a precaution. N-methyl-2-pyrrolidone is listed in Schedules 5 and 6 of the Poisons Standard. If your crew includes anyone in that position, plan the job around it — this is a substitution decision, not a personal-protective-equipment decision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation is essential, not advisory.\u003c\/strong\u003e Actichem specifies local exhaust ventilation where natural ventilation is poor, and a gas filter for organic compounds or a combination vapour\/aerosol filter to AS\/NZS 1715 and 1716. Small bathrooms, unventilated commercial kitchens and enclosed plant rooms are exactly where this product is most often used and where the exposure risk is highest. Open the space up, or use forced ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreat it as flammable.\u003c\/strong\u003e H226. Keep it away from heat, sparks, open flame and hot surfaces. Do not use it near a gas hot water service pilot light, a running burnisher motor, or hot work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317 is a sensitiser warning.\u003c\/strong\u003e Repeated skin contact can produce an allergic reaction that then recurs at much lower exposures. Once someone is sensitised to d-limonene, they stay sensitised.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever siphon or transfer by mouth, and never decant into a drink container.\u003c\/strong\u003e H304 means a small quantity aspirated into the lungs can be fatal. Keep it in its labelled container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye and face protection:\u003c\/strong\u003e safety glasses with side shields or chemical goggles. \u003cstrong\u003eBody:\u003c\/strong\u003e overalls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix\u003c\/strong\u003e with oxidising agents, strong acids, nitrates or chlorine bleach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eActichem's own product listing now also carries the DANGER classification. Our previous description was simply out of date.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Choose It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt removes factory wax from porcelain.\u003c\/strong\u003e This is the job it is best known for. New porcelain tile often arrives with a protective wax coating that ordinary cleaners smear rather than remove, leaving a patchy sheen that shows up under raking light. Tile \u0026amp; Grout Cream dissolves it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrout haze.\u003c\/strong\u003e The micro-abrasive content lets it cut cementitious haze without the acid wash that would attack the grout itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stays put.\u003c\/strong\u003e A gel body means full dwell time on vertical surfaces — shower walls, splashbacks, feature stone, graffiti on masonry — where a liquid degreaser would simply run to the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent power without an aggressive pH.\u003c\/strong\u003e Because the cleaning is done by solvents rather than caustic, it can be used on marble, limestone and other acid- and alkali-sensitive stone that a strong degreaser would etch or dull.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt penetrates films.\u003c\/strong\u003e The formulation separates soil and wax films from the substrate so they can be flushed away, rather than emulsifying them into a slurry that redeposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFactory wax coating removal from porcelain and ceramic tile\u003c\/li\u003e\n\u003cli\u003eGrout haze removal from tile and stone\u003c\/li\u003e\n\u003cli\u003eGrease, oil and grime removal from natural stone, polished concrete and tile\u003c\/li\u003e\n\u003cli\u003eStain removal from stone, concrete and tile — sticky residues, paint spots, chewing gum, food and drink staining, cosmetics\u003c\/li\u003e\n\u003cli\u003eGraffiti and adhesive residue on masonry and vertical surfaces\u003c\/li\u003e\n\u003cli\u003eDeep-set grime and grease on marble, fine stone, porcelain and tile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous location. Ready to use — do not dilute.\u003c\/p\u003e\n\u003ch3\u003eFloor surfaces\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVentilate the area before you start.\u003c\/li\u003e\n\u003cli\u003eApply Tile \u0026amp; Grout Cream directly to the affected area.\u003c\/li\u003e\n\u003cli\u003eScrub thoroughly with a slow-speed scrubber fitted with a suitable nylon pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 20 minutes dwell time for penetration and lifting of oily soils or wax films. Do not let it dry out.\u003c\/li\u003e\n\u003cli\u003eScrub again, then rinse well with clean water or a detergent solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eVertical surfaces\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply directly to the surface, or onto a non-scratch nylon scouring pad.\u003c\/li\u003e\n\u003cli\u003eSpread over the surface and agitate.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes dwell time.\u003c\/li\u003e\n\u003cli\u003eScrub or agitate, then rinse well with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eAfter the job\u003c\/h3\u003e\n\u003cp\u003eRinse thoroughly. Solvent residue left on a floor will attract soil, can soften some sealers and coatings, and will interfere with any sealer applied afterwards. If you intend to seal the surface, allow it to dry completely and confirm the sealer manufacturer's requirements before application.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility and Cautions\u003c\/h2\u003e\n\u003cp\u003eActichem lists natural stone, ceramic and porcelain, concrete and masonry, rubber and vinyl as suitable surfaces. Some practical qualifications are worth stating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt will remove sealers and coatings as well as wax.\u003c\/strong\u003e That is the same chemistry working. If the floor is sealed and you want to keep the sealer, this is the wrong product. If you are stripping to re-seal, it is the right one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVinyl and rubber:\u003c\/strong\u003e pre-test. Solvent gels can soften some plasticised vinyl and can lift the pattern layer on cheaper sheet vinyl with extended dwell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolished stone:\u003c\/strong\u003e the micro-abrasive is fine, but on a high-gloss honed or polished finish it should be worked with a soft nylon pad rather than an aggressive one, and pre-tested in a hidden area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePainted and powder-coated surfaces:\u003c\/strong\u003e it removes paint spots, which means it can also attack the paint you want to keep. Keep it off skirtings, painted door frames and coated aluminium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjacent carpet and soft furnishings:\u003c\/strong\u003e mask them. A solvent gel on carpet is a difficult problem to reverse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing it in an unventilated room.\u003c\/strong\u003e This is the single most common mistake with this product and the most consequential one, given the classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssuming pH 6 means mild.\u003c\/strong\u003e Actichem publishes a pH of 6 for this product on their marketing material, while the safety data sheet records pH as not applicable — which is correct, because the product is a water-immiscible solvent gel with a relative density of 0.89. There is no meaningful aqueous pH to measure. Do not use the pH figure as a guide to how gentle the product is; the hazard here comes from the solvents, not from acidity or alkalinity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLetting it dry on the surface.\u003c\/strong\u003e Dwell means damp, not dry. A dried film is harder to rinse and can leave a residue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkipping the rinse.\u003c\/strong\u003e Solvent residue attracts soil and defeats any sealer applied afterwards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing it as a general-purpose floor cleaner.\u003c\/strong\u003e It is a stripping and spot-removal product. For routine maintenance cleaning of sealed stone, use a neutral cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring it near ignition sources or in a hot vehicle\u003c\/strong\u003e in an Australian summer. H226.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP152\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAP152.005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e500 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite gel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eOrange citrus (from the d-limonene content)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e0.89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility in water\u003c\/td\u003e\n\u003ctd\u003eImmiscible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — solvent gel, not an aqueous solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 – 20 minutes (floors); 5 – 10 minutes (vertical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH226, H304, H315, H317, H360D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons Schedule\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport in packs of 5 litres or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eOxidising agents, strong acids, nitrates, chlorine bleach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActichem's safety data sheet records the flash point as \"not available\" while classifying the product as a Category 3 flammable liquid, which implies a flash point between 23 °C and 60 °C. We have asked Actichem to publish the measured value. Until they do, treat the product as flammable and store it accordingly.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does a citrus-smelling cream carry a DANGER classification?\u003c\/h3\u003e\n\u003cp\u003eThe citrus smell is d-limonene, which makes up 30 to 60% of the product. It is a natural terpene solvent, but \"natural\" and \"low hazard\" are not the same thing — d-limonene is a skin sensitiser and an aspiration hazard. The reproductive toxicity classification comes from the N-methyl-2-pyrrolidone content, which is present at under 10% and carries no odour at all. A pleasant smell tells you nothing useful about a product's hazard profile.\u003c\/p\u003e\n\u003ch3\u003eIs there a safer alternative for routine tile and grout cleaning?\u003c\/h3\u003e\n\u003cp\u003eYes, and for most maintenance work you should be using one. Tile \u0026amp; Grout Cream is a stripping and problem-solving product, not a routine cleaner. For regular cleaning of sealed stone and tile, Actichem Stone Soap or a neutral detergent is the right tool. Reserve this product for wax removal, grout haze and stains that nothing milder will shift.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on marble?\u003c\/h3\u003e\n\u003cp\u003eYes — it is one of the reasons the product exists. Because it works by solvent action rather than acid or caustic, it does not etch calcareous stone the way an acidic tile cleaner would. Pre-test on polished finishes and use a soft pad.\u003c\/p\u003e\n\u003ch3\u003eWill it damage grout?\u003c\/h3\u003e\n\u003cp\u003eIt is not acidic, so it does not attack cementitious grout the way an acid haze remover can. It will, however, remove a grout sealer along with everything else. Plan to re-seal.\u003c\/p\u003e\n\u003ch3\u003eWhat ventilation is actually enough?\u003c\/h3\u003e\n\u003cp\u003eActichem specifies local exhaust ventilation where natural ventilation is poor, and respiratory protection with an organic vapour filter to AS\/NZS 1715 and 1716. As a working rule: if you can smell it strongly and the room is enclosed, ventilation is not adequate. Open external doors and windows, use a fan to move air out of the space rather than around it, and take breaks outside the area.\u003c\/p\u003e\n\u003ch3\u003eCan it be diluted to make it go further or make it milder?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a gel formulation supplied ready to use. Adding water to a water-immiscible product breaks the gel and does not reduce the hazard of the solvent that remains.\u003c\/p\u003e\n\u003ch3\u003eDoes the 5 litre pack attract a dangerous goods surcharge?\u003c\/h3\u003e\n\u003cp\u003eActichem's safety data sheet states the product is not regulated for transport of dangerous goods in packs of 5 litres or less, which covers both pack sizes we supply. If a shipping surcharge appears at checkout that you believe is incorrect, contact us before ordering.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-5l\"\u003eActichem Tile \u0026amp; Grout Cream 5 litre\u003c\/a\u003e — the same formulation in the other pack size. Identical classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-soap-5-ltr\"\u003eActichem Stone Soap\u003c\/a\u003e — the routine maintenance cleaner for sealed stone. Use this for regular work and keep Tile \u0026amp; Grout Cream for the problems.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-sealer-pro-5l\"\u003eActichem Stone Sealer Pro\u003c\/a\u003e — the sealer to apply after stripping. Non-hazardous, water based.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — neutral cleaner recommended for ongoing maintenance of sealed surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eTile \u0026amp; Grout Cream does a job that nothing milder will do: it strips factory wax, grout haze, ground-in grease and adhesive residue from stone, tile, concrete and masonry, on horizontal and vertical surfaces alike, without the acid or caustic attack that would damage the substrate. That capability is worth having in the van.\u003c\/p\u003e\n\u003cp\u003eIt is also a Category 1B reproductive toxicant, an aspiration hazard and a flammable liquid, and it was previously listed on this page as non-hazardous. It is the right product for a specific set of jobs, used with proper ventilation, by someone who has read the safety data sheet. It is the wrong product for routine floor maintenance and the wrong product for anyone who is or may become pregnant.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-TG-CreamAP152.pdf\"\u003eActichem Tile \u0026amp; Grout Cream Safety Data Sheet — version 2.3, issued 9 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf your safe work method statement for this product was written on the basis that it was non-hazardous, it needs to be redone.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP152.005\u003c\/p\u003e\n\u003cp\u003eNot sure whether you need a stripper or a maintenance cleaner? Contact Carpet Cleaners Warehouse before you order. On most hard-floor jobs the milder product is the correct one — and where it is not, we would rather you knew what you were handling.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"500ML","offer_id":44832439042261,"sku":"AP152.005","price":49.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Tile-and-Grout-Cream-500ml.jpg?v=1780551589"},{"product_id":"actichem-instaseal-15-ltr","title":"Actichem Instaseal 15 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eInstaseal is a tough, semi-permanent, water-based floor sealer and base coat using thermoplastic technology. It provides a durable surface for interior or exterior applications.\u003c\/p\u003e\n\u003cp\u003eIt is formulated to protect fine stone flooring, terrazzo, terracotta and concrete from foot traffic and trolley wear in busy public areas, and it resists water blotching, scuffing and black heel marks.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e15 litre\u003c\/strong\u003e bulk pack — around 750 to 1,200 m² per coat, for contractors doing floor work at volume. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003e5 litre\u003c\/a\u003e suits smaller jobs.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTenacious bond\u003c\/strong\u003e — bonds to porous surfaces to form a durable, non-slip surface with a low sheen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide surface suitability\u003c\/strong\u003e — marble and fine stone, concrete, terrazzo, slate, pavers and vinyl flooring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase coat\u003c\/strong\u003e — an ideal foundation for high-gloss acrylic finishes such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eInstagloss\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e — prevents powdering and degradation of concrete and stone floors, and dramatically improves the cleanability of porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified non-hazardous\u003c\/strong\u003e — see the safety section below. In a category where the topcoat carries a reproductive toxicity classification, that is worth knowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy seal first?\u003c\/h2\u003e\n\u003cp\u003ePorous stone and concrete drink polish. Building gloss directly on an absorbent substrate takes more coats, costs more, and gives a poorer result because the finish keeps sinking in rather than levelling.\u003c\/p\u003e\n\u003cp\u003eSealing first solves three things at once:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer topcoats.\u003c\/strong\u003e Two coats of Instaseal cuts the Instagloss requirement from 3–5 coats to 2–3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower cost.\u003c\/strong\u003e Sealer is doing the filling; you are not paying gloss-finish prices to fill pores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower exposure.\u003c\/strong\u003e Instagloss is classified \u003cstrong\u003eH360Df, reproductive toxicity\u003c\/strong\u003e. Fewer coats of it means less handling and less time in the space. \u003cstrong\u003eSealing first is a genuine safety improvement, not just a cost one.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eA topical floor sealer and base coat.\u003c\/p\u003e\n\u003ch3\u003eSlip resistance\u003c\/h3\u003e\n\u003cp\u003eInstaseal displays satisfactory slip resistance when tested to the Australian Standards. \u003cstrong\u003eFor large commercial projects, conduct site-specific slip testing\u003c\/strong\u003e to confirm the rating achieved on the actual substrate. Slip resistance is a property of the coating \u003cem\u003eand\u003c\/em\u003e the floor under it, and a commercial client will expect a tested figure rather than an assurance.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use. Always pre-test in an inconspicuous location.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003ePreparation\u003c\/h3\u003e\n\u003cp\u003eStrip off old polish and wax residues with a floor coatings remover. \u003cstrong\u003eRinse thoroughly with clean water and let the floor dry completely.\u003c\/strong\u003e Sealer applied over residue or a damp floor will not bond, and the only fix is to strip it and start again.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eReady to use. Do not dilute.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply \u003cstrong\u003e2 to 4 coats\u003c\/strong\u003e depending on porosity and expected traffic. \u003cstrong\u003eIf it is functioning as a base coat under Instagloss, 2 coats is the figure\u003c\/strong\u003e, followed by 2 to 3 coats of Instagloss.\u003c\/li\u003e\n\u003cli\u003eApply with a clean polish applicator, spreading a thin coat using slightly overlapping strokes.\u003c\/li\u003e\n\u003cli\u003eAllow \u003cstrong\u003e30 to 40 minutes\u003c\/strong\u003e to dry.\u003c\/li\u003e\n\u003cli\u003eApply subsequent coats \u003cstrong\u003eat right angles to the previous coat\u003c\/strong\u003e for even coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstagloss can go on as soon as the Instaseal is touch dry\u003c\/strong\u003e — you do not need to wait out a full cure between the two products.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllow at least 12 hours before returning the floor to normal use.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRepeated thin coats beat one heavy application.\u003c\/strong\u003e Coverage is 50–80 m² per litre per coat depending on porosity.\u003c\/p\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eMaintain the sealed floor with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eProNeutro\u003c\/a\u003e neutral cleaner. On flat, smooth floors a higher sheen can be obtained by buffing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeutral is the operative word.\u003c\/strong\u003e An alkaline cleaner will progressively soften and dull a thermoplastic sealer, which is why floors maintained with general-purpose detergent stop responding to buffing.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eVerified non-hazardous — and we checked.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP420 records Instaseal as a \u003cstrong\u003enon-hazardous chemical and non-dangerous goods.\u003c\/strong\u003e No signal word, no hazard statements, no poisons schedule, pH 7. The sheet states that all ingredients are non-hazardous.\u003c\/p\u003e\n\u003cp\u003eWe are being explicit because we have been correcting a great many pages in this catalogue that claimed “non-hazardous” when the safety data sheet said otherwise — including \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eInstagloss\u003c\/a\u003e, the topcoat that goes over this product. \u003cstrong\u003eThis one is correct.\u003c\/strong\u003e We read the sheet and confirmed it.\u003c\/p\u003e\n\u003ch3\u003eOne caveat we want to be open about\u003c\/h3\u003e\n\u003cp\u003eThe published safety data sheet for AP420 is dated \u003cstrong\u003e2 July 2021\u003c\/strong\u003e — the oldest current sheet we have found anywhere in the Actichem range, where almost everything else carries a 2025 revision. Its composition section also names no ingredients, CAS numbers or percentages at all, only the statement that all ingredients are non-hazardous.\u003c\/p\u003e\n\u003cp\u003eWe have no reason to think the classification is wrong. But it is a four-year-old document with thinner disclosure than the rest of the range, and \u003cstrong\u003ewe have asked Actichem for a current revision.\u003c\/strong\u003e We would rather tell you that than present it as freshly confirmed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP420.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eWater-based thermoplastic floor sealer and base coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eOpaque blue liquid (SDS); white when dried down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e50–80 m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e2–4; 2 when used as a base coat under Instagloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e30–40 minutes between coats; \u003cstrong\u003e12 hours before normal use\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7\u003c\/strong\u003e (Actichem SDS). This listing previously stated 7.5.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNon-hazardous chemical\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eNone — not applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.2, issued 2 July 2021 — see the caveat above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eActichem Instaseal 5 litre\u003c\/a\u003e — the same product in the smaller pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eActichem Instagloss\u003c\/a\u003e — the high-gloss topcoat. \u003cstrong\u003eRead its safety section before you order it\u003c\/strong\u003e — it is classified H360Df, reproductive toxicity.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — the neutral cleaner for maintaining sealed floors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202107-Actichem-Instaseal-AP420.pdf\"\u003eActichem Instaseal safety data sheet (AP420, version 2.2, 2 July 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\u003cp\u003e“It's touch dry—can we start walking on it?” Not yet. With Instaseal, preparation and the full return-to-service time matter just as much as the drying between coats.\u003c\/p\u003e\u003chr\u003e\n\u003cp\u003eSKU: AP420.15\u003c\/p\u003e\n\u003cp\u003ePlanning a floor sealing and finishing job and not sure how many coats of each product you need? Tell us the substrate, the area and the traffic. Getting the coat schedule right first time saves both product and a return visit.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15LTR","offer_id":52320315310293,"sku":"AP420.15","price":306.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Instaseal-15-ltr.jpg?v=1780551755"},{"product_id":"actichem-instagloss-15-ltr","title":"Actichem Instagloss 15 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eInstagloss is a high-gloss acrylic polymer floor polish. It blends durability and hardness for traffic, black heel mark resistance, and wet-look repairability.\u003c\/p\u003e\n\u003cp\u003eIt is easy to apply and dries to an instant brilliant gloss, which suits institutions, medical facilities, offices, homes, retail outlets and similar. Its levelling properties are good enough that it can be used as a \u003cstrong\u003esingle-step finish\u003c\/strong\u003e, without a base sealer. The high solids content builds quickly, so fewer coats reach the required gloss and protection.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e15 litre\u003c\/strong\u003e bulk pack — around 750 to 1,200 m² per coat, for contractors doing floor work at volume. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003e5 litre\u003c\/a\u003e suits smaller jobs.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrilliant wet-look gloss\u003c\/strong\u003e from the first application of two or more coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent repairability\u003c\/strong\u003e — responds well to cleaning and buffing programs, and revives to a deep shine when buffed or burnished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating performance\u003c\/strong\u003e — durability and resistance to traffic marks, black heel marks and scuffing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlip resistance\u003c\/strong\u003e — conforms with the \u003cstrong\u003eAS\/NZS 4586:2004\u003c\/strong\u003e slip resistance classification of new pedestrian surface materials, wet and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber floors\u003c\/strong\u003e — provides a durable protective coating that enhances the natural grain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable for vinyl, linoleum, slate, terrazzo, terracotta, marble and granite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn stone surfaces and polished concrete, apply a base coat of \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eInstaseal\u003c\/a\u003e first.\u003c\/strong\u003e Porous stone will drink polish, and sealing first is both cheaper and gives a better finish than trying to build gloss directly on an absorbent substrate.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use\u003c\/strong\u003e — see the safety section below, which has changed substantially. \u003cstrong\u003eAlways pre-test in an inconspicuous location.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003ePreparation\u003c\/h3\u003e\n\u003cp\u003eStrip off old polish and wax residues with a floor coatings remover. \u003cstrong\u003eRinse the floor thoroughly with clean water and let it dry completely.\u003c\/strong\u003e Polish applied over residue or damp floor will cloud, and the only fix is to strip it and start again.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eReady to use. Do not dilute.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply \u003cstrong\u003e3 to 5 coats\u003c\/strong\u003e depending on the porosity of the surface and expected traffic. \u003cstrong\u003eIf Instaseal has been used as a base coat, 2 to 3 coats will do\u003c\/strong\u003e — and Instagloss can go on as soon as the Instaseal is touch dry.\u003c\/li\u003e\n\u003cli\u003eApply with a clean polish applicator, spreading a thin coat using slightly overlapping strokes.\u003c\/li\u003e\n\u003cli\u003eAllow \u003cstrong\u003e30 to 40 minutes\u003c\/strong\u003e to dry.\u003c\/li\u003e\n\u003cli\u003eApply each subsequent coat \u003cstrong\u003eat right angles to the previous coat.\u003c\/strong\u003e This is what gives even coverage — applying every coat in the same direction builds ridges you will see under lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow at least 12 hours before returning the floor to normal use.\u003c\/strong\u003e Polish that is dry to touch is not yet cured; putting traffic on it early is the most common cause of early failure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRepeated thin, evenly spread coats beat one heavy application.\u003c\/strong\u003e A heavy coat skins over on top while still soft underneath, and that is what produces the soft, marking finish people blame on the product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 50–80 m² per litre per coat, depending on porosity.\u003c\/p\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eMaintain the finish with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eProNeutro\u003c\/a\u003e neutral cleaner. \u003cstrong\u003eNeutral is the operative word\u003c\/strong\u003e — an alkaline cleaner will progressively soften and dull an acrylic polish, which is why floors maintained with general-purpose detergent stop responding to buffing.\u003c\/p\u003e\n\u003cp\u003eBuff regularly with a white, grey or red pad using an electric or battery polishing machine capable of 150 to 1000 rpm.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section before your next job. This listing previously recorded “Safety profile: Non-hazardous”. That was seriously wrong\u003c\/strong\u003e, and this is one of the most significant corrections we have made across our whole range.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP422, version 2.4 issued 5 August 2025, classifies Instagloss as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH360Df\u003c\/strong\u003e — \u003cstrong\u003emay damage the unborn child. Suspected of damaging fertility.\u003c\/strong\u003e (Reproductive Toxicity Category 1B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317\u003c\/strong\u003e — may cause an allergic skin reaction (Skin Sensitiser Category 1B)\u003c\/li\u003e\n\u003cli\u003eNot a dangerous good. No poisons schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H360Df — reproductive toxicity\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the most serious class of hazard statement in the GHS system, and it needs to be read properly rather than skimmed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eH360Df is not an irritation warning. It says the product \u003cstrong\u003emay damage an unborn child\u003c\/strong\u003e, and is \u003cstrong\u003esuspected of damaging fertility\u003c\/strong\u003e. The driver is \u003cstrong\u003edibutyl phthalate\u003c\/strong\u003e (CAS 84-74-2) at under 10% — a plasticiser that is restricted or being phased out in a number of product categories internationally for exactly this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this means practically:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnyone who is pregnant, may become pregnant, or is trying to conceive should not apply this product.\u003c\/strong\u003e That applies to the applicator and to anyone else in the area while it is being applied and drying. This is a conversation worth having with your team rather than assuming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate the area properly during application and drying.\u003c\/strong\u003e You are coating a whole floor, so the exposed surface area is large and the exposure period is hours, not minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the area clear of occupants during application and the drying period.\u003c\/strong\u003e In a medical facility, a childcare centre, an aged care home or a residence, plan the job around that requirement rather than working around people.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not eat, drink or smoke while applying.\u003c\/strong\u003e Wash before breaks and at the end of the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe are being direct about this because “non-hazardous” on this page may have led people to apply it without ventilation, with others present, or while pregnant.\u003c\/strong\u003e We are sorry. If that describes a job you have done, the sensible step is to speak to a doctor rather than worry about it privately.\u003c\/p\u003e\n\u003ch3\u003e⚠ H317 — skin sensitisation\u003c\/h3\u003e\n\u003cp\u003eSensitisation is cumulative and permanent. \u003cstrong\u003eOnce you are sensitised, you stay sensitised\u003c\/strong\u003e, and thereafter even brief contact can trigger dermatitis. Floor applicators who lay polish week after week are the exposure group this catches. Keep it off your skin as routine, not as a reaction to a rash.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eAvoid \u003cstrong\u003estrong acids, strong oxidisers, permanganates, nitrates, oxidising agents and chlorine bleaches.\u003c\/strong\u003e In practice: do not strip a floor with a chlorine product and then coat over it without a thorough rinse.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Rinse with water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with water. \u003cstrong\u003eIf a rash develops, stop using the product\u003c\/strong\u003e and seek medical advice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Remove to fresh air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Give water and contact a Poisons Information Centre.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP422.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHigh-gloss acrylic polymer floor polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eOpaque white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e50–80 m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e3–5, or 2–3 over an Instaseal base coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e30–40 minutes between coats; \u003cstrong\u003e12 hours before normal use\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.5\u003c\/strong\u003e (Actichem SDS). This listing previously stated 7.5; we have asked Actichem to confirm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eEthylene\/acrylic acid copolymer (CAS 9010-77-9) 30–60%; \u003cstrong\u003edibutyl phthalate (CAS 84-74-2) under 10%\u003c\/strong\u003e; tris(2-butoxyethyl) phosphate (CAS 78-51-3) under 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlip resistance\u003c\/td\u003e\n\u003ctd\u003eConforms with AS\/NZS 4586:2004, wet and dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eStrong acids, strong oxidisers, permanganates, nitrates, oxidising agents, chlorine bleaches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eH360Df\u003c\/strong\u003e, H317\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.4, issued 5 August 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eActichem Instagloss 5 litre\u003c\/a\u003e — the same product in the smaller pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eActichem Instaseal\u003c\/a\u003e — the base sealer. Verified \u003cstrong\u003enon-hazardous\u003c\/strong\u003e. Using it reduces the number of Instagloss coats needed, which reduces both cost and exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — the neutral cleaner for maintaining the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202508-Actichem-Instagloss-AP422.pdf\"\u003eActichem Instagloss safety data sheet (AP422, version 2.4, 5 August 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\u003cp\u003eThe client wants a wet-look floor, but one thick coat rarely gives the finish they're picturing. Instagloss rewards clean preparation and thin, even applications. Walk the floor under side lighting before coating; scratches and old polish ridges don't disappear under fresh gloss.\u003c\/p\u003e\u003chr\u003e\n\u003cp\u003eSKU: AP422.15\u003c\/p\u003e\n\u003cp\u003eIf the reproductive toxicity classification is a problem for your team or your site — and in a childcare, medical or aged care setting it reasonably might be — talk to us. We would rather help you find an appropriate alternative than sell you something you should not be using.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15LTR","offer_id":52320315375829,"sku":"AP422.15","price":296.01,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Instagloss-15-ltr.jpg?v=1780551756"},{"product_id":"actichem-pre-seal-5-ltr","title":"Actichem Pre-Seal 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Pre-Seal — sold by Actichem as Preseal Pro, product code AP171 — is a penetrating pre-sealer applied to stone, masonry and cement products \u003cem\u003ebefore\u003c\/em\u003e and during installation, not after it.\u003c\/p\u003e\n\u003cp\u003eIts job is to stop water getting into the material at the point in its life when the material is most vulnerable: during fabrication, transport and the wet trades. Water ingress at that stage is what causes tile warp, picture framing around grout lines, moisture staining from the bed and adhesive, and construction stains that are permanent by the time the site is handed over.\u003c\/p\u003e\n\u003cp\u003eThe key design constraint is that a pre-sealer must not interfere with adhesive bond strength. A film-forming sealer applied before installation would compromise the bond. Pre-Seal is a penetrating silane-type treatment that works inside the pore structure, so the adhesive still keys into the substrate.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Use It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt prevents defects rather than fixing them.\u003c\/strong\u003e Picture framing, tile warp and moisture staining cannot be cleaned off after the fact. They are installation faults, and this is the product that avoids them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt does not compromise adhesive bond.\u003c\/strong\u003e That is the difference between a pre-sealer and simply sealing early with a normal sealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier grout clean-up.\u003c\/strong\u003e Grout smear releases from a pre-sealed surface far more readily, which saves labour on every tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVapour permeable.\u003c\/strong\u003e It does not trap moisture in the substrate or hinder the natural passage of water vapour — important on anything laid over a slab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-sided sealing is supported.\u003c\/strong\u003e Dip-sealing is an approved application method, which is the gold standard for protecting stone against moisture from the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost-effective.\u003c\/strong\u003e It is formulated to work alongside the rest of the Actichem penetrating sealer range rather than duplicate it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Information — Please Read Before Ordering\u003c\/h2\u003e\n\u003cp\u003eThe previous version of this page carried no safety information at all. Actichem's current safety data sheet — version 2.2, issued 15 July 2025 — classifies Pre-Seal as \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eClassification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318 — Causes serious eye damage.\u003c\/strong\u003e Eye Irritation Category 1. This is the top eye category, not eye irritation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315 — Causes skin irritation.\u003c\/strong\u003e Skin Corrosion\/Irritation Category 2.\u003c\/li\u003e\n\u003cli\u003ePoisons Schedule: not applicable\u003c\/li\u003e\n\u003cli\u003eNot regulated for transport of dangerous goods\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003epH 10.5 as supplied.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIngredients: potassium methylsiliconate (CAS 31795-24-1) \u0026lt;5%; isopropanol (CAS 67-63-0) \u0026lt;10%; balance withheld as trade secret\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat that means on site\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye protection is mandatory, and the application method makes it more important, not less.\u003c\/strong\u003e This product is applied by saturating a surface, often by sprayer, often overhead of the operator's hands, and often by people who are dipping tiles. Potassium siliconate at pH 10.5 in an eye is a Category 1 eye damage event. Chemical goggles are the sensible choice over safety glasses here.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHave an eyewash available.\u003c\/strong\u003e Actichem specifies an eyewash unit. On a fabrication bench or a dip tank, that means a plumbed or bottled eyewash within reach of the operator — not a tap at the other end of the yard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintain adequate ventilation at all times.\u003c\/strong\u003e Actichem's wording, not a softened version of it. The isopropanol content evaporates during cure, and dip-sealing in an enclosed shed concentrates it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsopropanol is flammable.\u003c\/strong\u003e The product itself is not classified as a flammable liquid and the safety data sheet records the flash point as not applicable, but the solvent flashing off during cure is. No hot work, no smoking, no grinding sparks near a freshly treated batch or an open dip tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective clothing.\u003c\/strong\u003e Actichem specifies barrier cream and skin cleansing cream in addition to the usual work clothing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use methylated spirits to remove residue while the product is wet\u003c\/strong\u003e near an ignition source — see the residue-removal note below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your safe work method statement for pre-sealing was written without a DANGER classification in it, it needs to be redone.\u003c\/p\u003e\n\u003ch2\u003eRecommended Substrates\u003c\/h2\u003e\n\u003cp\u003eFormulated to protect construction and fine stone, masonry and cement products during fabrication, transportation and installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarble, limestone and travertine\u003c\/li\u003e\n\u003cli\u003eSandstone, granite, basalt and bluestone\u003c\/li\u003e\n\u003cli\u003eCement and clay pavers\u003c\/li\u003e\n\u003cli\u003eTerracotta, Saltillo and quarry tile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous location.\u003c\/p\u003e\n\u003ch3\u003ePreparation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe material surface must be totally clean, dry and free of any chemical residue.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not apply in direct sunlight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eApply at temperatures between 10 °C and 28 °C.\u003c\/li\u003e\n\u003cli\u003eCoverage is 5 to 20 m² per litre per coat, depending on porosity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply one coat by generously saturating the surface using a polish applicator, roller or sprayer. Ensure even coverage.\u003c\/li\u003e\n\u003cli\u003eDip-sealing is also an approved method, and is the preferred approach where six-sided protection is required.\u003c\/li\u003e\n\u003cli\u003eThe surface must remain shiny and wet with a liquid film for at least 30 seconds. Very porous substrates will need more product to achieve this.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes for absorption, then remove the excess with a clean dry towel.\u003c\/li\u003e\n\u003cli\u003eTen minutes after the last application, wipe off any sealer remaining on the surface using absorbent toweling or an applicator.\u003c\/li\u003e\n\u003cli\u003eResidue that has dried on the surface can be removed by moistening the towel with methylated spirits. Do this in a ventilated area and away from ignition sources.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCuring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllow 24 hours before fabrication or installation.\u003c\/li\u003e\n\u003cli\u003eKeep dry for 12 hours.\u003c\/li\u003e\n\u003cli\u003eFull cure in 24 to 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese times are the whole value of the product. Pre-sealing a batch of tiles and laying them the same afternoon gives you neither the protection nor the bond behaviour you paid for.\u003c\/p\u003e\n\u003ch2\u003eWhere Pre-Seal Fits in the Sealing Programme\u003c\/h2\u003e\n\u003cp\u003ePre-Seal and a finish sealer do different jobs at different times and are not alternatives to each other.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Seal\u003c\/strong\u003e goes on before and during installation. It protects against water, grout, adhesive and construction contamination while the trades are still on site, without compromising the adhesive bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStone Sealer Pro\u003c\/strong\u003e goes on after installation, once the surface is clean, dry and fully cured. It provides the long-term oil and water repellency the client actually lives with.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn a high-value stone installation, using both is the correct specification. Using only a finish sealer means the material has already absorbed whatever it was going to absorb before you got there.\u003c\/p\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplying to a damp or contaminated surface.\u003c\/strong\u003e The material must be totally clean, dry and chemical-free. A penetrating pre-sealer cannot get into pores that are already full of water or saw slurry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplying in direct sun or above 28 °C.\u003c\/strong\u003e The carrier flashes off before the active penetrates, which gives you surface residue instead of protection. On an Australian site this is the most common failure and it is entirely avoidable — work early, work shaded, or work indoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot keeping the surface wet for the full 30 seconds.\u003c\/strong\u003e On porous terracotta or sandstone you will need noticeably more product than the coverage figure suggests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaving residue to dry.\u003c\/strong\u003e Wipe it back within the stated window. Dried residue needs methylated spirits and effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstalling before 24 hours.\u003c\/strong\u003e Both the protection and the bond behaviour depend on the cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreating it as a substitute for the finish sealer.\u003c\/strong\u003e It is not, and the client will notice within a year.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking without eye protection because \"it is only a pre-sealer\".\u003c\/strong\u003e H318.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAP171.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePenetrating pre-sealer for natural stone and porous tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear, water-white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003eMiscible in water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e5 – 20 m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e10 – 28 °C, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWet film dwell\u003c\/td\u003e\n\u003ctd\u003eMinimum 30 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBefore fabrication or installation\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeep dry\u003c\/td\u003e\n\u003ctd\u003e12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003e24 – 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons Schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActichem's safety data sheet lists pack sizes of 5 litres and 15 litres. Carpet Cleaners Warehouse stocks both. For a large fabrication run, see the \u003ca href=\"\/products\/actichem-pre-seal-15-ltr\"\u003e15 litre pack\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill pre-sealing stop my tiles bonding?\u003c\/h3\u003e\n\u003cp\u003eNo — that is the specific problem this product is formulated to avoid. It is a penetrating treatment, not a film former, so the adhesive still keys into the pore structure. A general-purpose sealer applied before installation would be a different story, and that is why \"just seal it early\" is not a substitute.\u003c\/p\u003e\n\u003ch3\u003eWhat is picture framing and how does pre-sealing prevent it?\u003c\/h3\u003e\n\u003cp\u003ePicture framing is the darker border you sometimes see around the edge of each tile after installation. It is moisture and fines from the adhesive bed and grout wicking into the porous edges of the tile and staying there. Pre-sealing the material — particularly by dip-sealing for six-sided coverage — stops that ingress before it can happen. Once it has happened, it is very difficult to reverse.\u003c\/p\u003e\n\u003ch3\u003eWhat is tile warp and is this really the fix?\u003c\/h3\u003e\n\u003cp\u003ePorous tiles that absorb moisture unevenly from a wet bed can distort. Reducing absorption reduces that distortion. Pre-Seal significantly inhibits warping; it is not a guarantee against every combination of tile, bed and site condition, and it does not replace correct bedding practice.\u003c\/p\u003e\n\u003ch3\u003eCan I dip-seal rather than brush or spray?\u003c\/h3\u003e\n\u003cp\u003eYes. Dip-sealing is an approved method and gives true six-sided protection, which is the best outcome for high-value stone. Note that a dip tank concentrates the exposure risk — an open bath of a DANGER-classified, pH 10.5 liquid needs ventilation, eye protection and an eyewash close at hand.\u003c\/p\u003e\n\u003ch3\u003eDo I still need to seal after installation?\u003c\/h3\u003e\n\u003cp\u003eYes. Pre-Seal protects the material through the build. Stone Sealer Pro provides the long-term stain and oil repellency the finished floor needs. They are complementary, not alternatives.\u003c\/p\u003e\n\u003ch3\u003eHow much will I need?\u003c\/h3\u003e\n\u003cp\u003eCoverage runs from 5 to 20 m² per litre per coat, which is a very wide band because porosity varies enormously between granite and terracotta. Estimate from a test area on the actual material rather than from the midpoint of that range.\u003c\/p\u003e\n\u003ch3\u003eWhat if it dries on the surface before I wipe it back?\u003c\/h3\u003e\n\u003cp\u003eMoisten a towel with methylated spirits and work the residue off. Do it in a ventilated area and away from ignition sources. Prevention is easier — set the batch size so you can wipe back within the stated window.\u003c\/p\u003e\n\u003ch3\u003eCan I apply it outdoors in summer?\u003c\/h3\u003e\n\u003cp\u003eOnly within 10 °C to 28 °C and out of direct sunlight. On most Australian summer days that means early morning, late afternoon or under cover. Applying to hot stone gives poor penetration and surface residue.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-sealer-pro-5l\"\u003eActichem Stone Sealer Pro\u003c\/a\u003e — the finish sealer to apply after installation and cure. Non-hazardous, water based.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-soap-5-ltr\"\u003eActichem Stone Soap\u003c\/a\u003e — the maintenance cleaner for the finished floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-gel-pro-5-ltr\"\u003eActichem Stone Gel Pro\u003c\/a\u003e — acid-free cream cleanser for scale and soap scum on stone.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-5l\"\u003eActichem Tile \u0026amp; Grout Cream\u003c\/a\u003e — grout haze and wax removal. \u003cstrong\u003eClassified DANGER with a reproductive toxicity statement — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003ePre-Seal is the product that separates a stone installation that still looks right in five years from one that was compromised before the grout went in. It stops water, grout and adhesive contamination entering the material during fabrication and installation, makes grout clean-up easier, and does it without compromising adhesive bond.\u003c\/p\u003e\n\u003cp\u003eIt is a DANGER-classified product with a Category 1 eye damage statement at pH 10.5, applied by saturation and often by dipping — an application method that puts the operator close to the liquid. Goggles, ventilation and an eyewash within reach are the baseline. Observe the temperature limits and the 24-hour cure, and it will do exactly what it is designed to do.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-Preseal-Pro-AP171.pdf\"\u003eActichem Preseal Pro Safety Data Sheet — version 2.2, issued 15 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\u003cp\u003eYou can't seal through dirt, damp or leftover stripper. With Pre-Seal, the test patch tells you more than the coverage figure on the label.\u003c\/p\u003e\u003chr\u003e\n\u003cp\u003eSKU: AP171.05\u003c\/p\u003e\n\u003cp\u003ePlanning a stone installation and not sure whether to pre-seal, dip-seal or seal only on completion? Contact Carpet Cleaners Warehouse before you order. The decision has to be made before the material is laid, and it is not one you can revisit afterwards.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":52320315900117,"sku":"AP171.05","price":54.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Pre-Seal-5-ltr.jpg?v=1780551762"},{"product_id":"actichem-solv-sealer-gold-5ltr","title":"Actichem Solv Sealer Gold 5ltr","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Solv Sealer Gold is the premium solvent-borne penetrating sealer in the Actichem range, and the one to specify when the substrate is dense, the exposure is harsh, or the client expects the protection to outlast the warranty period on everything else in the building.\u003c\/p\u003e\n\u003cp\u003eIt combines nano-scale fluorochemical technology with specialist penetrating solvents. The solvent carrier is the point: it drives the fluoropolymer into small-pore, dense substrates that a water-based sealer struggles to enter — dense granite, basalt, engineered stone, tight-bodied porcelain and hard-fired clay. Once cured it leaves an invisible barrier inside the pore structure that repels both water-borne and oil-borne contamination.\u003c\/p\u003e\n\u003cp\u003eActichem states protection of up to 15 years, independently performance tested by a NATA-accredited stone laboratory.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Choose It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise chemistry.\u003c\/strong\u003e A blend of nano-scale, small-particle fluorochemical technology with specialist penetrating solvents, formulated for high penetration into small-pore dense substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium dual protection.\u003c\/strong\u003e Resists water-borne and oil-borne contaminants — food and beverage staining, oil and grease spills, biological growth such as mould and mildew, spalling, efflorescence, pollution and weathering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile.\u003c\/strong\u003e Works across a wide substrate range, with particular distinction on natural stone, porous engineered stone and clay products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural look.\u003c\/strong\u003e Does not alter the natural appearance of fine stone, nor change surface texture, slip characteristics or colouring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface safe.\u003c\/strong\u003e Will not etch or damage recommended substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent penetration where water-based will not go.\u003c\/strong\u003e On a dense, low-porosity substrate a solvent carrier is the difference between protection and a surface residue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Information — Please Read Before Ordering\u003c\/h2\u003e\n\u003cp\u003eThe previous version of this page described the safety profile as \"Class 3 Flammable\" and carried no link to a safety data sheet. Flammability is correct but it is only part of the classification, and this is a Poisons Schedule 5 product with an aspiration hazard.\u003c\/p\u003e\n\u003cp\u003eActichem's safety data sheet — version 2.2, issued 30 July 2021 — classifies Solv Sealer Gold as follows.\u003c\/p\u003e\n\u003ch3\u003eClassification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH226 — Flammable liquid and vapour.\u003c\/strong\u003e Flammable Liquids Category 3. Flash point above 25 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH304 — May be fatal if swallowed and enters airways.\u003c\/strong\u003e Aspiration Hazard Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH319 — Causes serious eye irritation.\u003c\/strong\u003e Eye Irritation Category 2A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315 — Causes skin irritation.\u003c\/strong\u003e Skin Corrosion\/Irritation Category 2.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePoisons Schedule 5.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHAZCHEM 3Y.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content 463 g\/L.\u003c\/strong\u003e This is a high-VOC product. If the job is Green Star or has a VOC limit in the specification, use the water-based Stone Sealer Pro instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComposition\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNaphtha, petroleum, hydrotreated heavy (CAS 64742-48-9)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProprietary silane\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003en-Butyl acetate (CAS 123-86-4)\u003c\/td\u003e\n\u003ctd\u003e10 – \u0026lt;30%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMethyl ethyl ketone (CAS 78-93-3)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProprietary fluoropolymer\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePropylene glycol monomethyl ether acetate (CAS 108-65-6)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDangerous goods — the pack size changes the answer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTransport status\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 ml, 2.5 L, 5 L\u003c\/td\u003e\n\u003ctd\u003eNot regulated for dangerous goods — exempt at 5 litres or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 L\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eUN 1993, Class 3, Packing Group III\u003c\/strong\u003e — Flammable Liquid, N.O.S. (contains n-butyl acetate). HAZCHEM 3Y. Limited quantity 5 L.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis matters when you consign it. The 5 litre pack you can freight normally. The 15 litre pack is fully regulated dangerous goods and needs to be consigned as such.\u003c\/p\u003e\n\u003ch3\u003eWhat this means on site\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreat it as a flammable liquid, because it is one.\u003c\/strong\u003e No smoking, no hot work, no grinding, no pilot lights. A sealer job generates a large evaporating surface area of Class 3 solvent across a whole floor. This is the single biggest risk with this product and it is easy to underestimate because the liquid itself looks like water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate properly.\u003c\/strong\u003e Actichem states natural ventilation is adequate in most circumstances. A sealed-up apartment, a basement or a shower recess is not most circumstances. Get air moving out of the space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever siphon by mouth and never decant into an unlabelled or drink container.\u003c\/strong\u003e H304 — a small quantity aspirated into the lungs can be fatal. The product looks exactly like water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye protection:\u003c\/strong\u003e safety glasses with side shields or chemical goggles. Actichem also specifies overalls, a PVC apron and an eyewash unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt dissolves rubber, many plastics, resins and some coatings.\u003c\/strong\u003e This is stated in Section 10 and it has practical consequences — check that your sprayer seals, pump diaphragms, buckets and applicator handles are solvent-compatible before you start, or you will discover the problem mid-job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with\u003c\/strong\u003e caustics, strong acids, oxidising agents or nitrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended Substrates\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite, marble, limestone, travertine, basalt and bluestone\u003c\/li\u003e\n\u003cli\u003eSandstone and slate\u003c\/li\u003e\n\u003cli\u003eTerracotta, quarry and porous tile\u003c\/li\u003e\n\u003cli\u003ePorous engineered stone\u003c\/li\u003e\n\u003cli\u003eConcrete, masonry and brick\u003c\/li\u003e\n\u003cli\u003eGrout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous location, including for appearance.\u003c\/p\u003e\n\u003ch3\u003eConditions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDo not apply above 40 °C.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not apply if rain is expected within 2 hours.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIf rain has preceded the work, allow the surface 24 hours to dry completely before sealing.\u003c\/li\u003e\n\u003cli\u003eThe surface must be clean, dry and free of coatings, wax, sealer residue and grout haze.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply ready to use. Do not dilute.\u003c\/li\u003e\n\u003cli\u003eApply 1 to 3 coats depending on porosity, saturating the surface with a polish applicator, roller or sprayer.\u003c\/li\u003e\n\u003cli\u003eKeep the surface visibly shiny and wet for at least one minute.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes absorption, then move the excess across the surface with a squeegee.\u003c\/li\u003e\n\u003cli\u003eWait 20 to 30 minutes between coats.\u003c\/li\u003e\n\u003cli\u003eWipe off any sealer remaining on the surface after 10 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-structure, highly porous substrates: approximately 5 – 10 m² per litre per coat\u003c\/li\u003e\n\u003cli\u003eDense, less porous substrates: approximately 10 – 20 m² per litre per coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCuring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep off traffic for 12 hours.\u003c\/li\u003e\n\u003cli\u003eKeep the surface dry for 24 hours.\u003c\/li\u003e\n\u003cli\u003eFull cure in 24 to 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExpected Life and Maintenance\u003c\/h2\u003e\n\u003cp\u003eActichem states ultimate protection for up to 15 years. Application method, weather conditions, traffic and cleaning regime all affect actual wear.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlan on re-application every 5 to 7 years where harsh conditions exist.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid solvents, strong acids and strong alkalis\u003c\/strong\u003e on the sealed surface. Nothing shortens sealer life faster than aggressive routine cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActichem recommends ProNeutro\u003c\/strong\u003e as the maintenance cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eField test for whether re-sealing is due: drop water on the surface in several places. If it beads and sits, the sealer is working. If it darkens the stone and soaks in within a minute, it is time to re-seal.\u003c\/p\u003e\n\u003ch3\u003eImportant limitation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNot to be used as sub-terrain waterproofing.\u003c\/strong\u003e A penetrating sealer resists staining and reduces absorption; it is not a waterproofing membrane and does not replace one. Do not specify it for retaining walls, tanking or anything with hydrostatic pressure behind it.\u003c\/p\u003e\n\u003ch2\u003eSolv Sealer Gold or Stone Sealer Pro?\u003c\/h2\u003e\n\u003cp\u003eThis is the decision most customers actually need help with, so it is worth setting out plainly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSolv Sealer Gold (AP176)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eStone Sealer Pro (AP172)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eSolvent\u003c\/td\u003e\n\u003ctd\u003eWater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStated life\u003c\/td\u003e\n\u003ctd\u003eUp to 15 years\u003c\/td\u003e\n\u003ctd\u003eUp to 7 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest on\u003c\/td\u003e\n\u003ctd\u003eDense, low-porosity substrates; harsh exposure\u003c\/td\u003e\n\u003ctd\u003eMedium to high porosity stone, clay and cement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification\u003c\/td\u003e\n\u003ctd\u003eDANGER — flammable, aspiration hazard, Schedule 5\u003c\/td\u003e\n\u003ctd\u003eNon-hazardous, non-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC\u003c\/td\u003e\n\u003ctd\u003e463 g\/L\u003c\/td\u003e\n\u003ctd\u003eVery low — meets Green Star Office Design v3 IEQ-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 L transport\u003c\/td\u003e\n\u003ctd\u003eUN 1993 Class 3 PG III\u003c\/td\u003e\n\u003ctd\u003eNot regulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOccupied premises\u003c\/td\u003e\n\u003ctd\u003eRequires solvent management and ventilation planning\u003c\/td\u003e\n\u003ctd\u003eStraightforward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Solv Sealer Gold\u003c\/strong\u003e where the substrate is dense and a water-based sealer will not penetrate, where exposure is harsh, or where maximum service life justifies the handling requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Stone Sealer Pro\u003c\/strong\u003e where the substrate is porous enough to take a water-based sealer, where the job is in an occupied building, or where the specification carries a VOC limit. On most porous stone and paving it will do the job with none of the solvent management.\u003c\/p\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing a damp substrate.\u003c\/strong\u003e A solvent sealer and residual moisture do not mix — you will get poor penetration and a patchy result. Twenty-four hours dry after rain, minimum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking in the heat.\u003c\/strong\u003e Above 40 °C the solvent flashes off before the fluoropolymer is drawn in. That is not just a wasted coat; it is surface residue you then have to remove.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing a sprayer with incompatible seals.\u003c\/strong\u003e Section 10 says it dissolves rubber and many plastics. Check first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderestimating the fire risk\u003c\/strong\u003e because the liquid looks like water. A whole floor of evaporating Class 3 solvent in an enclosed space is a serious hazard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecifying it on a Green Star job.\u003c\/strong\u003e 463 g\/L VOC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreating it as waterproofing.\u003c\/strong\u003e It is not, and the manufacturer says so.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsigning the 15 litre pack as general freight.\u003c\/strong\u003e UN 1993, Class 3, Packing Group III.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP176\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAP176.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSolvent-based penetrating sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive chemistry\u003c\/td\u003e\n\u003ctd\u003eNano-scale fluorochemical with proprietary silane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear, water-white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — solvent based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e0.85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility in water\u003c\/td\u003e\n\u003ctd\u003eImmiscible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInitial boiling point\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC\u003c\/td\u003e\n\u003ctd\u003e463 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e5 – 10 m²\/L porous; 10 – 20 m²\/L dense, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e1 – 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraffic\u003c\/td\u003e\n\u003ctd\u003eAfter 12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003e24 – 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH226, H304, H315, H319\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons Schedule\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods — 5 L\u003c\/td\u003e\n\u003ctd\u003eNot regulated (exempt at 5 L or less)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods — 15 L\u003c\/td\u003e\n\u003ctd\u003eUN 1993, Class 3, PG III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActichem lists pack sizes of 500 ml, 2.5 L, 5 L and 15 L for AP176. Carpet Cleaners Warehouse currently stocks the 5 litre. Contact us for the other sizes.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs 15 years realistic?\u003c\/h3\u003e\n\u003cp\u003eThat is Actichem's stated figure and it is supported by NATA-accredited laboratory testing. Real-world life depends on how the floor is cleaned more than on anything else — a surface maintained with a neutral cleaner will approach it; a surface scrubbed with an alkaline degreaser every week will not. Actichem's own recommendation is re-application every 5 to 7 years in harsh conditions, and that is the figure to plan a maintenance budget around.\u003c\/p\u003e\n\u003ch3\u003eWhy choose solvent over water-based?\u003c\/h3\u003e\n\u003cp\u003ePenetration. On a dense substrate — hard granite, basalt, tight porcelain, dense engineered stone — a water-based sealer struggles to enter the pore structure, so much of it stays on the surface and gets wiped away. A solvent carrier gets in. On genuinely porous material like terracotta or sandstone, a water-based sealer penetrates perfectly well and the solvent brings you nothing but handling problems.\u003c\/p\u003e\n\u003ch3\u003eWill it change how the stone looks?\u003c\/h3\u003e\n\u003cp\u003eNo. It does not alter appearance, surface texture, slip characteristics or colouring. Pre-test anyway — it costs five minutes and a small offcut.\u003c\/p\u003e\n\u003ch3\u003eCan I use it in an occupied building?\u003c\/h3\u003e\n\u003cp\u003eIt can be done, but it needs planning: ventilation, exclusion of the area, no ignition sources, and an occupant who understands there will be solvent odour for some hours. In an occupied residential or healthcare setting, Stone Sealer Pro is usually the better answer.\u003c\/p\u003e\n\u003ch3\u003eCan I use it as waterproofing under tiles or behind a retaining wall?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem states plainly that it is not to be used as sub-terrain waterproofing. It reduces absorption and resists staining; it does not withstand hydrostatic pressure and it is not a membrane.\u003c\/p\u003e\n\u003ch3\u003eWhat do I clean a sealed floor with?\u003c\/h3\u003e\n\u003cp\u003eA neutral cleaner. Actichem recommends ProNeutro. Stone Soap is also suitable on natural stone. Avoid solvents, strong acids and strong alkalis.\u003c\/p\u003e\n\u003ch3\u003eDoes the 5 litre pack attract a dangerous goods surcharge?\u003c\/h3\u003e\n\u003cp\u003eIt should not — the safety data sheet exempts packs of 5 litres or less. The 15 litre pack is fully regulated. If you see a surcharge on a 5 litre order that you believe is incorrect, contact us before completing it.\u003c\/p\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eBetween 5 and 20 m² per litre per coat, at one to three coats. That is a very wide band, and porosity is the variable. Seal a test area on the actual substrate and measure from that rather than from the midpoint of the range.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-sealer-pro-5l\"\u003eActichem Stone Sealer Pro\u003c\/a\u003e — the water-based alternative. Non-hazardous, very low VOC, Green Star compliant. The right choice on porous substrates and in occupied buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-pre-seal-5-ltr\"\u003eActichem Pre-Seal\u003c\/a\u003e — pre-installation protection against grout, adhesive and construction staining.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — the maintenance cleaner Actichem recommends for sealed surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-soap-5-ltr\"\u003eActichem Stone Soap\u003c\/a\u003e — routine cleaning of sealed natural stone.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-5l\"\u003eActichem Tile \u0026amp; Grout Cream\u003c\/a\u003e — wax, coating and grout haze removal before sealing. \u003cstrong\u003eClassified DANGER with a reproductive toxicity statement — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eSolv Sealer Gold is the sealer for the jobs that defeat water-based products: dense substrates, harsh exposure, and clients who want a sealing cycle measured in years rather than seasons. The solvent carrier is what makes that possible, and it is also what you have to manage.\u003c\/p\u003e\n\u003cp\u003eIt is a DANGER-classified, Poisons Schedule 5, Category 3 flammable liquid with an aspiration hazard and 463 g\/L VOC, and the 15 litre pack is fully regulated dangerous goods. Where those constraints fit the job, nothing in the range protects better. Where they do not, Stone Sealer Pro will do the work with none of the handling.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/cce-actichem_Solv_Sealer_Gold_SDS_2021_Pack.pdf\" target=\"_blank\" rel=\"noopener\"\u003eActichem Solv Sealer Gold Safety Data Sheet — version 2.2, issued 30 July 2021 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the current published Actichem sheet, which is now more than five years old. CCW has asked Actichem to confirm whether a more recent revision exists and will replace this link if one is issued.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP176.05\u003c\/p\u003e\n\u003cp\u003eNot sure whether your substrate needs a solvent-based or a water-based sealer? Contact Carpet Cleaners Warehouse before you order. The answer depends on porosity, and getting it wrong means either a wasted drum of expensive sealer or a floor that is not properly protected.\u003c\/p\u003e\n\u003col\u003e\u003c\/ol\u003e\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\u003cp\u003eSolvent sealer jobs aren't decided by how shiny the sample looks while it's wet. Clean, dry stone and even application matter; pooling on the surface can leave a patchy result. Allow for ventilation and keep ignition sources out of the work area.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":53945023398101,"sku":"AP176.05","price":445.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Solv-Sealer-Gold-5ltr.jpg?v=1780551807"},{"product_id":"actichem-pre-seal-15-ltr","title":"Actichem Pre-Seal 15 ltr","description":"\u003cp\u003eActichem Pre-Seal — sold by Actichem as Preseal Pro, product code AP171 — is a premium penetrating pre-sealer applied to stone, masonry and cement products before and during installation. This is the 15 litre pack for fabricators and large installations. The same product is available as a \u003ca href=\"\/products\/actichem-pre-seal-5-ltr\"\u003e5 litre pack\u003c\/a\u003e, and that page carries the full application guide.\u003c\/p\u003e\n\u003cp\u003eThe 15 litre pack is ordered in on request, so allow extra lead time.\u003c\/p\u003e\n\u003ch2\u003eWhat it does\u003c\/h2\u003e\n\u003cp\u003ePre-Seal is formulated to dramatically inhibit the ingress of moisture into construction and fine stone, masonry and cement products during the installation process. It does this without compromising adhesive bond strength, while helping prevent tile warp and other installation defects. It is cost-effective and works in conjunction with the rest of the Actichem penetrating sealer range.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application\u003c\/strong\u003e — penetrates quickly and is easy to apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetains newness\u003c\/strong\u003e — protects against staining and water absorption during fabrication, transport and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects\u003c\/strong\u003e — enables easier removal of grout smear, helps prevent “framing” caused by grout moisture ingress, and helps prevent construction and installation stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVapour permeable\u003c\/strong\u003e — will not trap moisture and does not hinder the natural passage of water vapour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents installation defects\u003c\/strong\u003e — significantly inhibits tile warping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety information — please read before ordering\u003c\/h2\u003e\n\u003cp\u003eActichem's current safety data sheet (version 2.2, issued 15 July 2025) classifies Pre-Seal as \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH318 — Causes serious eye damage (Category 1).\u003c\/li\u003e\n\u003cli\u003eH315 — Causes skin irritation.\u003c\/li\u003e\n\u003cli\u003epH 10.5 as supplied. Contains potassium methylsiliconate (\u0026lt;5%) and isopropanol (\u0026lt;10%).\u003c\/li\u003e\n\u003cli\u003ePoisons Schedule: not applicable. Not regulated for transport of dangerous goods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWear chemical goggles and gloves, keep an eyewash within reach, and maintain adequate ventilation at all times, particularly when dip-sealing. The isopropanol flashing off during cure is flammable: no hot work, smoking or grinding sparks near a freshly treated batch or an open dip tank.\u003c\/p\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble, limestone and travertine\u003c\/li\u003e\n\u003cli\u003eSandstone, granite, basalt and bluestone\u003c\/li\u003e\n\u003cli\u003eCement and clay pavers\u003c\/li\u003e\n\u003cli\u003eTerracotta, Saltillo and quarry tile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePreparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe material surface must be totally clean, dry and chemical free.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight. Apply at temperatures between 10 °C and 28 °C.\u003c\/li\u003e\n\u003cli\u003eCoverage is 5 to 20 m² per litre per coat. At that rate a 15 litre pack treats roughly 75 to 300 m² in one coat, depending on porosity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDirections\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eApply one coat by generously saturating the surface using a polish applicator, roller or sprayer. Ensure even coverage. Dip-sealing is also an approved method for six-sided sealing.\u003c\/li\u003e\n\u003cli\u003eThe surface must be shiny wet with a liquid film for at least 30 seconds. Very porous substrates may need more sealer.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes for the sealer to absorb, then remove the excess with a clean dry towel.\u003c\/li\u003e\n\u003cli\u003eTen minutes after the last application, wipe off any sealer remaining on the surface with absorbent towelling or an applicator. Moisten the towel with methylated spirits to remove residues that have dried on the surface — in a ventilated area, away from ignition sources.\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours before fabrication or installation. Keep dry for 12 hours. Full cure in 24 to 48 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n\u003ctd\u003eAP171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAP171.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003ePenetrating pre-sealer for natural stone and porous tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003epH as supplied\u003c\/th\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDilution\u003c\/th\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e5 – 20 m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e10 – 28 °C, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal word\u003c\/th\u003e\n\u003ctd\u003eDANGER (H315, H318)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDangerous goods\u003c\/th\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003e5 litre or 15 litre?\u003c\/h3\u003e\n\u003cp\u003eEstimate from a test area on the actual material, because coverage runs from 5 to 20 m² per litre. For a single bathroom or a small paving job the \u003ca href=\"\/products\/actichem-pre-seal-5-ltr\"\u003e5 litre pack\u003c\/a\u003e is enough. For a fabrication run, a dip tank or a whole house of stone, the 15 litre pack is the practical size.\u003c\/p\u003e\n\u003ch3\u003eWill pre-sealing stop my tiles bonding?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a penetrating treatment, not a film former, and is formulated so adhesive bond strength is not compromised.\u003c\/p\u003e\n\u003ch3\u003eDo I still need to seal after installation?\u003c\/h3\u003e\n\u003cp\u003eYes. Pre-Seal protects the material through the build. A finish sealer such as \u003ca href=\"\/products\/actichem-tile-and-grout-sealer-pro-5l\"\u003eActichem Stone Sealer Pro\u003c\/a\u003e provides the long-term stain repellency once the floor is laid, clean and cured.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-Preseal-Pro-AP171.pdf\" target=\"_blank\" rel=\"noopener\"\u003eActichem Preseal Pro Safety Data Sheet — version 2.2, issued 15 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003ePlanning a stone installation and not sure whether to pre-seal, dip-seal or seal only on completion? Contact Carpet Cleaners Warehouse before you order. The decision has to be made before the material is laid.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15LTR","offer_id":68195427844309,"sku":"AP171.15","price":155.24,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem_20Pre-Seal_2015_20ltr.jpg?v=1794459194"}],"url":"https:\/\/ccwonline.com.au\/collections\/concrete.oembed?page=2","provider":"Carpet Cleaners Warehouse","version":"1.0","type":"link"}