{"title":"Actichem","description":"\u003cp\u003eShop the full range of Actichem professional cleaning and disinfection chemicals, including sanitisers, deodorisers, and specialist restoration solutions trusted by carpet cleaning and remediation professionals across Australia.\u003c\/p\u003e","products":[{"product_id":"actichem-percide-5ltr","title":"Actichem Percide 5ltr (TGA Listed)","description":"\u003cp\u003e\u003cstrong\u003eTGA listed for use against COVID-19 in the ARTG for legal supply in Australia. AUST L 332284.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s Percide is an advanced peroxide-based \u003cstrong\u003ehospital grade disinfectant\u003c\/strong\u003e for the eradication of mould and decontamination of infectious environments.\u003c\/p\u003e\n\u003cp\u003eIts formula penetrates deep into porous surfaces and reacts with mould spores and growth to eradicate them. It also removes the mould stain and brightens the surface being treated. Percide does not encapsulate or hide the mould — it attacks the spores and roots.\u003c\/p\u003e\n\u003cp\u003ePercide also displays strong biocidal activity against bacteria and viruses. Evaluated against the hospital grade disinfectant test and the AOAC hard surface carrier test, it achieves the kill rates tabulated below in 60 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA note on clearance reports:\u003c\/em\u003e earlier versions of this page said Percide ensures 100% clearance reports on every mould remediation job. Clearance depends on the whole remediation process — containment, source removal, physical removal of contaminated material, drying and independent verification. No product delivers a clearance result on its own. Percide is a very good disinfection and eradication step within that process.\u003c\/p\u003e\n\u003ch2\u003eMould\u003c\/h2\u003e\n\u003cp\u003ePercide’s peroxide formula has several design features that provide consistent, reliable results in mould remediation. It reacts aggressively on contact with mould, eradicating spores and lifting mould out of surface pores.\u003c\/p\u003e\n\u003cp\u003ePercide takes 10 minutes to achieve a greater than 4.4 log reduction against \u003cem\u003eAspergillus brasiliensis\u003c\/em\u003e. With a favourable and economical ready-to-use profile, it is a product of choice.\u003c\/p\u003e\n\u003ch2\u003eTrauma, Black Water, Biohazard Decontamination, CAT3\u003c\/h2\u003e\n\u003cp\u003ePercide’s primary function is rapid, powerful pathogen eradication even in the presence of organic soil. Its deep pore penetration makes it a strong decontamination and restoration tool for trauma, black water and bio-contamination applications.\u003c\/p\u003e\n\u003cp\u003ePercide leaves no oily or toxic residue and can be left as a residual after clean-up is complete. It is active against gram-positive and gram-negative bacteria, moulds, spores, and enveloped and non-enveloped viruses.\u003c\/p\u003e\n\u003ch2\u003eEfficacy — What the Listing Actually Covers\u003c\/h2\u003e\n\u003cp\u003eThese are the organisms and contact times behind the ARTG listing. Keep this table on file — it is what an auditor or a hygienist will ask for.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrganism\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReduction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eContact time\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspergillus brasiliensis (mould, BS EN 1650)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePenicillium chrysogenum (mould, BS EN 1650)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaphylococcus aureus\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePseudomonas aeruginosa\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSalmonella choleraesuis\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;8 log\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEscherichia coli\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;8 log\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProteus vulgaris\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;8 log\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoronavirus (Murine Hepatitis Virus)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolio Type 1 Virus\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eContact time is the step that actually disinfects.\u003c\/strong\u003e One minute for bacteria and viruses, ten minutes for mould, and the surface must stay visibly wet for that whole period. On a warm or porous surface that usually means a second pass. A one-minute claim applied for fifteen seconds is not a disinfection.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced peroxide formula\u003c\/strong\u003e — disinfection and mould eradication performance in an easy-to-use form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — the anti-microbial package is combined with super-wetting technology, enabling the biocide to penetrate faster and deeper into fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning and destaining\u003c\/strong\u003e — lifts mould from surface pores and works on mould and bacterial discolouration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates odours\u003c\/strong\u003e — at their source, by anti-microbial action against odour-causing germs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInherently biodegradable\u003c\/strong\u003e — an environmentally responsible choice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo oily or toxic residue\u003c\/strong\u003e — can be left as a residual after clean-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eObserve all safety directions and read the SDS before use.\u003c\/li\u003e\n\u003cli\u003ePercide is suitable on most carpets and fabrics; some delicate fibres, and fibres destabilised by disaster activity, could be affected.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution — read this before you spray a synthetic carpet\u003c\/h3\u003e\n\u003cp\u003ePercide is supplied ready to use, and for hard surfaces \u003cstrong\u003eno dilution is necessary\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn textiles the position is different.\u003c\/strong\u003e Actichem’s product data sheet states that \u003cstrong\u003epolypropylene accepts the undiluted product, but other synthetics require 50% dilution.\u003c\/strong\u003e That distinction did not appear on this page previously and it matters — polypropylene is common in commercial loop pile, but nylon, polyester and wool blends are not polypropylene. Identify the fibre, or dilute 50% and pre-test.\u003c\/p\u003e\n\u003ch3\u003eBoosting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor heavy mould, mix \u003cstrong\u003e9 parts Percide to 1 part \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-boost-500ml\"\u003ePercide Boost\u003c\/a\u003e\u003c\/strong\u003e for accelerated eradication and cleaning. Use within 6 hours.\u003c\/li\u003e\n\u003cli\u003eFor fogging applications Actichem specify \u003cstrong\u003e20 ml Percide Boost per litre of Percide\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePercide Boost is a corrosive Class 8 dangerous good.\u003c\/strong\u003e Percide is not. See the comparison under Safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove and clean away all wet and dry debris.\u003c\/li\u003e\n\u003cli\u003eApply Percide solution to the affected area, ensuring all surfaces come into contact with it. Apply by spray, wet fog, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate briefly where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum of 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat for heavy mould conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e after cleaning and disinfection are complete, Percide can be applied as a post-residual treatment for enhanced inhibition of fresh mould growth.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEarlier versions of this page carried no hazard information at all. Percide is a mild product by the standards of this catalogue, but \"mild\" is a conclusion the customer should be able to check, not one we should ask them to assume.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePercide is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods and carries \u003cstrong\u003eno poisons schedule\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH319\u003c\/strong\u003e — causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eGHS: Eye Irritation Category 2 — and nothing else\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: 2P\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e6.2\u003c\/strong\u003e — close to neutral\u003c\/li\u003e\n\u003cli\u003eActive: \u003cstrong\u003ehydrogen peroxide, less than 8%\u003c\/strong\u003e by weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePercide and Percide Boost are not the same hazard\u003c\/h3\u003e\n\u003cp\u003eThese two products are sold together, mixed together and stored together. They are not equivalent, and their pages used to read as though they were.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide Boost\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statement\u003c\/td\u003e\n\u003ctd\u003eH319 — serious eye irritation\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314 — severe skin burns and eye damage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUN1760, Class 8, PG II\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e6.2\u003c\/td\u003e\n\u003ctd\u003e10.4 – 10.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide, under 8%\u003c\/td\u003e\n\u003ctd\u003ePotassium hydroxide and glycolic acid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies safety glasses with side shields or chemical goggles, chemical protective gloves (neoprene recommended), overalls, a PVC apron, barrier cream and access to an eyewash unit. H319 is the reason for the eye protection — this is a fogging and spraying product, and mist finds eyes.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water for 10 to 15 minutes, removing contact lenses if present. Seek medical attention if pain persists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and wash with soap and water.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003ePercide is a peroxide. The SDS names \u003cstrong\u003ereducing agents, acids, alkalis and combustible organic matter\u003c\/strong\u003e as incompatible. In practice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with hypochlorite\u003c\/strong\u003e — \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eChlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e or pool chlorine. Two oxidisers together buy you nothing and behave unpredictably.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with acids\u003c\/strong\u003e — \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or acid rinses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with alkalis\u003c\/strong\u003e — other than Percide Boost, at the stated ratio, which is the one designed combination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not leave saturated rags or absorbent material balled up.\u003c\/strong\u003e Peroxide and combustible organic matter is a poor combination even at this concentration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso note that \u003cstrong\u003eanionic detergent residue and organic soil load reduce disinfectant performance.\u003c\/strong\u003e Clean first, rinse, then disinfect — and give it the full contact time.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP610.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eARTG listing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eAUST L 332284\u003c\/strong\u003e — hospital grade disinfectant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide, less than 8% w\/w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e6.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — hard surfaces\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — polypropylene\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — other synthetics\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e50%\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact time — disinfection\u003c\/td\u003e\n\u003ctd\u003e1 minute, surface kept wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact time — mould remediation\u003c\/td\u003e\n\u003ctd\u003e10 minutes, surface kept wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoost ratio — heavy mould\u003c\/td\u003e\n\u003ctd\u003e9 parts Percide to 1 part Percide Boost; use within 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoost ratio — fogging\u003c\/td\u003e\n\u003ctd\u003e20 ml Percide Boost per litre of Percide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH319\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eReducing agents, acids, alkalis, combustible organic matter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 8 October 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-750ml\"\u003eActichem Percide 750 ml\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-20ltr\"\u003ePercide 20 Ltr\u003c\/a\u003e — the same product in other pack sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-boost-500ml\"\u003eActichem Percide Boost 500 ml\u003c\/a\u003e — the activator for heavy mould. Corrosive Class 8 — read its page before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a peroxide product classified non-hazardous, for lighter work with no listing requirement\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e — the chlorine alternative. Corrosive dangerous goods, and not for textiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ebs.tga.gov.au\/servlet\/xmlmillr6?dbid=ebs\/PublicHTML\/pdfStore.nsf\u0026amp;docid=BA6A26FC8DD4B1D6CA25885500435028\u0026amp;agid=(PrintDetailsPublic)\u0026amp;actionid=1\"\u003eAustralian Register of Therapeutic Goods Certificate\u003c\/a\u003e — AUST L 332284\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Percide-AP610.pdf\"\u003eSafety Data Sheet — version 2.3, issued 8 October 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP610.05\u003c\/p\u003e\n\u003cp\u003eWorking to a scope that specifies a listed hospital grade disinfectant? Percide is listed, and the organism table above is what you can put in the file. If you are not sure whether your scope needs a listed product at all, contact Carpet Cleaners Warehouse before you order.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":20916698021947,"sku":"AP610.05","price":69.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Percide-5ltr-TGA-Listed.jpg?v=1780550911"},{"product_id":"actichem-deosan-5ltr","title":"Actichem Deosan 5 Ltr","description":"\u003cp\u003eDeosan is Actichem's anti-microbial odour neutraliser - the one for severe malodour where the smell is bacterial and you need the bacteria dead, not just covered. It pairs a professional malodour absorber with a blend of biocides and potentiators, so it works on two fronts at once. This listing is the 5 litre pack.\u003c\/p\u003e\n\u003cp\u003eIt is the right product for organic waste, urine, faeces, sewage, pet contamination, flooding and fire damage odours, and for mould and mildew spores. It is the wrong product on stain-resistant nylon - see the warning below before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeosan is a hazardous chemical under the WHS Regulations - signal word DANGER.\u003c\/strong\u003e It causes serious eye damage. It is not dangerous goods and ships unregulated. Read the safety section below before you order, and make sure whoever uses it has eye protection.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eSimply cleaning an area will not remove odour molecules. Bad odours exist in the air and are trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an odour control strategy.\u003c\/p\u003e\n\u003cp\u003eDeosan attacks the problem from both ends. The odour-causing bacteria and spores are destroyed by a blend of biocides and potentiators, while a professional malodour absorber encapsulates and neutralises the airborne smell. That combination is what makes it the quickest way to restore healthy indoor air quality after a sewage, flood or trauma job.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional odour neutralising technology\u003c\/strong\u003e - a professional malodour absorber that encapsulates and neutralises air-borne malodours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSophisticated anti-microbial chemistry\u003c\/strong\u003e - destroys odour-causing bacteria and spores with a powerful blend of biocides and potentiators.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh residual scent\u003c\/strong\u003e - deodorises the area with a fresh floral scent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire damage odours\u003c\/strong\u003e - effective against tough fire odours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMould and mildew\u003c\/strong\u003e - the biocidal activity also destroys mould and mildew spores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard surfaces\u003c\/strong\u003e - equally at home on hard surfaces as on textiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it earns its place\u003c\/h2\u003e\n\u003cp\u003eDeosan is highly effective on hard surfaces including concrete, plasterboard, wood, tiles and grout, and is suitable for all wool and synthetic fabrics and carpeting - with one important exception, below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewage and Category 3 water\u003c\/strong\u003e - where the odour is bacterial and the bacteria are still live.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUrine and animal contamination\u003c\/strong\u003e - carpet, underlay, subfloor, concrete.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlood and water damage\u003c\/strong\u003e - including the plasterboard and framing behind the wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMould and mildew\u003c\/strong\u003e - destroys spores rather than bleaching the stain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire damage\u003c\/strong\u003e - tough smoke and combustion odours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant - not for stain-resistant nylon\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDeosan will possibly remove some or all of the stain-resistant treatment from stain-resistant nylon carpet.\u003c\/strong\u003e Do not use it on that fibre unless you have made a considered decision to.\u003c\/p\u003e\n\u003cp\u003eThe practical caveat CCW have always given still applies: stain-resistant carpet that is severely soiled by organic contaminants will already have lost a high proportion of its stain-resistant treatment. On a sewage or urine job that carpet is often past saving anyway. That is a judgement call for the technician on site, not a rule - but make it knowingly.\u003c\/p\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eCCW's long-standing recommendation is \u003cstrong\u003e50 to 100 ml per litre of water (1:10 to 1:20)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eActichem currently publish a wider range of \u003cstrong\u003e1:10 to 1:50\u003c\/strong\u003e (20 to 90 ml per litre). We have asked them to confirm which is current. Until they do, use the stronger CCW range on heavy organic contamination and the weaker end only for light residual work.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution directly onto the odour source.\u003c\/li\u003e\n\u003cli\u003eAllow \u003cstrong\u003e10 minutes of reaction time\u003c\/strong\u003e before further cleaning or rinsing.\u003c\/li\u003e\n\u003cli\u003eWhen used after cleaning, a light rinse is enough to remove excess Deosan solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAlways ensure the Deosan makes physical contact with the odour source.\u003c\/strong\u003e This is the whole job. A deodoriser that cannot reach the contamination does nothing.\u003c\/p\u003e\n\u003cp\u003eDeosan can be applied before cleaning, after cleaning, or both. \u003cstrong\u003eIf large amounts of organic matter are present, always treat the area again after cleaning has removed the soiling\u003c\/strong\u003e - even if you already treated it beforehand.\u003c\/p\u003e\n\u003cp\u003eFor large areas, a 1:100 solution can be made up and used as a light post-spray, raked into the carpet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not mix Deosan with any other cleaning solution.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the routine 1:10 to 1:20 rate, a 5 litre pack makes roughly 50 to 100 litres of working solution.\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003eActichem's current safety data sheet for AP433, version 2.3 issued 8 August 2025, classifies Deosan as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e under the WHS Regulations, and as \u003cstrong\u003enon-dangerous goods\u003c\/strong\u003e under the ADG Code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSkin Corrosion\/Irritation, Category 2\u003c\/li\u003e\n\u003cli\u003eSerious Eye Damage, Category 1\u003c\/li\u003e\n\u003cli\u003eSkin Sensitisation, Category 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHazard statements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e - Causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317\u003c\/strong\u003e - May cause an allergic skin reaction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e - Causes serious eye damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eH318 is the one that matters.\u003c\/strong\u003e Serious Eye Damage Category 1 means a splash of concentrate in the eye can cause irreversible damage. Actichem specify an \u003cstrong\u003eeye wash unit\u003c\/strong\u003e in the personal protective equipment for this product, which is not something they do lightly. Decanting a 5 litre jerrican without eye protection is not an acceptable risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH317 is cumulative.\u003c\/strong\u003e Skin sensitisation builds with repeated exposure and does not go away. A technician who handles concentrate bare-handed for long enough can end up unable to work around the product at all.\u003c\/p\u003e\n\u003cp\u003ePersonal protective equipment Actichem specify for handling the concentrate: \u003cstrong\u003esafety glasses with side shields or chemical goggles, chemical protective gloves (butyl, neoprene or Viton), overalls, barrier cream and skin cleansing cream, and access to an eye wash unit.\u003c\/strong\u003e Maintain adequate ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransport is a separate question to hazard.\u003c\/strong\u003e The HAZCHEM code is not applicable and the product is not regulated for the transport of dangerous goods. That is a shipping rule. It does not make the product safe to handle without protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis page previously described Deosan's safety profile as \"Irritant\". That was wrong and understated the hazard.\u003c\/strong\u003e The classification above comes directly from Actichem's current safety data sheet.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202508-Actichem-Deosan-AP433.pdf\"\u003eDownload the Deosan AP433 Safety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deosan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP433\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP433.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre (also available in 20 litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrate - dilute before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eOrange-tan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003ePowder Fresh (the safety data sheet describes the odour as floral)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5 (neutral)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive chemistry\u003c\/td\u003e\n\u003ctd\u003eBiocides and potentiators plus a professional malodour absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:10 to 1:20 (CCW); 1:100 as a light post-spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003ctd\u003eYes, under the WHS Regulations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNo - not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deosan-20-ltr\"\u003eDeosan 20 Ltr\u003c\/a\u003e - the same product in the bulk pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deozyme-5ltr\"\u003eDeozyme 5 Ltr\u003c\/a\u003e - enzyme digester for organic material that is still present.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic 5 Ltr\u003c\/a\u003e - concentrated neutraliser for decaying matter and rotting organic material.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deofresh-citrus-5-ltr\"\u003eDeofresh Citrus 5 Ltr\u003c\/a\u003e - routine carpet deodorising and fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV Citrus 5 Ltr\u003c\/a\u003e - for fogging a whole space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeosan, Deozyme, Deostor or Deofresh?\u003c\/h2\u003e\n\u003cp\u003eThese ranges are not interchangeable, and buying the wrong one is the most common mistake with Actichem odour control. The question that sorts them is \u003cstrong\u003ewhat is producing the smell right now.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeosan\u003c\/strong\u003e - live bacteria and microbial growth. It kills the organisms producing the odour and neutralises what is already in the air. The only one in the range with biocidal action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeozyme\u003c\/strong\u003e - the organic source is still physically present. It digests the material rather than killing bacteria. Note that Deozyme relies on live bacteria to work, so \u003cstrong\u003eDeosan and Deozyme should not be used together or in sequence without a thorough rinse\u003c\/strong\u003e - Deosan's biocides will kill Deozyme's organisms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeostor\u003c\/strong\u003e - a specific residue, most often fire and smoke. The heavy neutraliser. Several Deostor products carry a materially higher hazard classification again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeofresh\u003c\/strong\u003e - routine carpet work and everyday malodours, with a fragrance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy is Deosan classified DANGER when other deodorisers are not?\u003c\/h3\u003e\n\u003cp\u003eBecause it contains biocides. The chemistry that kills bacteria and mould spores is also the chemistry that damages eyes and skin. Actichem's safety data sheet classifies it Serious Eye Damage Category 1, hazard statement H318. Wear eye protection and gloves for the concentrate.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on stain-resistant nylon?\u003c\/h3\u003e\n\u003cp\u003eNot without accepting that it may strip some or all of the stain-resistant treatment. On carpet that is already severely contaminated with organics, much of that treatment will have gone anyway - but make that call deliberately, and pre-test.\u003c\/p\u003e\n\u003ch3\u003eCan I use Deosan and Deozyme together?\u003c\/h3\u003e\n\u003cp\u003eNo, not without rinsing thoroughly in between. Deozyme works by means of live Bacillus organisms. Deosan is a biocide. It will kill them and you lose the enzyme digestion you paid for.\u003c\/p\u003e\n\u003ch3\u003eDoes it kill mould?\u003c\/h3\u003e\n\u003cp\u003eActichem state the biocidal activity destroys mould and mildew spores. It is not a stain remover - it will not bleach out existing mould staining. If you need the mark gone as well as the spores, that is a different product.\u003c\/p\u003e\n\u003ch3\u003eHow far does 5 litres go?\u003c\/h3\u003e\n\u003cp\u003eAt the 50-100 ml per litre rate, roughly 50 to 100 litres of working solution. As a 1:100 post-spray it goes a great deal further.\u003c\/p\u003e\n\u003ch3\u003eDo I have to rinse it?\u003c\/h3\u003e\n\u003cp\u003eWhen Deosan is used after cleaning, a light rinse is sufficient to remove excess solution. The deliberate 1:100 post-spray raked into carpet is meant to stay.\u003c\/p\u003e\n\u003ch3\u003eWill it fix the smell on its own?\u003c\/h3\u003e\n\u003cp\u003eOnly if it can reach the source. Deosan has to make physical contact with the contamination. No deodoriser fixes an odour sealed under contaminated underlay, a wet subfloor or a cavity - that has to come out first.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eWith Deosan, the question we keep coming back to is “Did the product actually touch the contamination?” On urine, sewage or other organic odours, treating the carpet face while the contamination is sitting in the backing or substrate underneath is only treating half the job. Where there’s a lot of organic matter, clean the bulk contamination away and treat again if necessary rather than expecting the first application to work through a layer of soil.\u003c\/p\u003e\n\u003cp\u003eAlso worth remembering: Deosan shouldn’t be mixed with other cleaning solutions, and it can affect the stain-resistant treatment on some stain-resistant nylon carpets.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether you need Deosan, Deozyme, Deostor or Deofresh for the job in front of you? Ring us before you order and we will talk it through.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":20916800225339,"sku":"AP433.05","price":89.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Deosan-5ltr.jpg?v=1780550912"},{"product_id":"actichem-deozyme-5ltr","title":"Actichem Deozyme 5 Ltr","description":"\u003cp\u003eDeozyme is Actichem's enzyme odour digester - the one you reach for when the smell is coming from something organic that is still there. It blends four active enzymes and Bacillus organisms with a patented odour neutraliser, so it digests the source rather than covering it. This listing is the 5 litre pack.\u003c\/p\u003e\n\u003cp\u003eIt is the right product for human and animal waste, spoiled food, decaying matter, necrotic tissue and sewage. It is the wrong product if the source has already been removed and you only need a fragrance.\u003c\/p\u003e\n\u003cp\u003eDeozyme is a hazardous chemical under the WHS Regulations - signal word Warning, and a Category 1 skin sensitiser. It is not dangerous goods and ships unregulated. Read the safety section below before you order.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eSimply cleaning an area will not remove odour molecules. Bad odours exist in the air and are trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an odour control strategy.\u003c\/p\u003e\n\u003cp\u003eDeozyme works on two fronts at once. The patented neutraliser pairs with airborne odour molecules on a molecular level, and the quad-enzyme and Bacillus action digests the organic material producing the smell. That second half is what separates it from every other product in the Actichem odour range.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional odour neutralising technology\u003c\/strong\u003e - a patented formula that works by odour-pairing on a molecular level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSophisticated enzyme chemistry\u003c\/strong\u003e - powerful quad-enzyme action digests organic odour sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide application\u003c\/strong\u003e - eliminates the stench of decaying matter, necrotic tissue, sewage and human or animal remains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerial odour control\u003c\/strong\u003e - neutralises air-borne malodours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface odour control\u003c\/strong\u003e - neutralises odours trapped in fabrics, carpet, wood and porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh residual scent\u003c\/strong\u003e - deodorises the area with a fresh floral scent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it earns its place\u003c\/h2\u003e\n\u003cp\u003eDeozyme is highly effective on most water-cleanable surfaces including synthetic materials, wood, concrete, stone, tiles and grout. It is also suitable for all wool and synthetic fibres, though pre-testing is recommended, especially on delicate fibres, to confirm dye and fibre stability and sensitivity to chemicals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrauma and decomposition work\u003c\/strong\u003e - necrotic tissue and human or animal remains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewage and Category 3 water\u003c\/strong\u003e - where the odour is bacterial in origin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUrine contamination\u003c\/strong\u003e - carpet, underlay, subfloor, concrete.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpoiled food and waste\u003c\/strong\u003e - bins, cool rooms, waste areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorous substrates\u003c\/strong\u003e - concrete, grout, timber, where the odour has soaked in and a surface clean will not reach it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe one thing that will stop it working\u003c\/h2\u003e\n\u003cp\u003eDeozyme relies on live bacteria. \u003cstrong\u003eHot water, bleach and chlorinated products may kill the active bacteria in this product.\u003c\/strong\u003e They will not affect its odour-counteracting properties, but they will kill the digestion half of the job - which is the half you bought it for.\u003c\/p\u003e\n\u003cp\u003eIn practice that means: mix with cool or lukewarm water, not hot; do not run it through a machine that has just had a chlorinated product through it without rinsing; and \u003cstrong\u003edo not mix Deozyme with any other product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShake well before use.\u003c\/strong\u003e The active organisms settle.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eAdd 30-60 ml per litre of water (1:16 to 1:32) depending on soil conditions.\u003cbr\u003eFor heavy soil conditions, up to 100 ml per litre can be added.\u003c\/p\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals, and on sensitive surfaces pre-test for dye and fibre stability as well.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution to a workable area using a sprayer, sponge or scrubber machine.\u003c\/li\u003e\n\u003cli\u003eDo not allow the solution to dry onto the surface.\u003c\/li\u003e\n\u003cli\u003eAgitate and allow 30 minutes of dwell time. Keep the area moist with the solution.\u003c\/li\u003e\n\u003cli\u003eRinse the surface thoroughly using clean water. A high-pressure or wet extraction washing system will give the best result.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eA 1:100 Deozyme solution can be left as a residual on resilient surfaces for further odour removal and re-odorising activity.\u003c\/p\u003e\n\u003cp\u003eAt the routine 1:16 to 1:32 rate, a 5 litre pack makes roughly 80 to 165 litres of working solution.\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003eActichem's current safety data sheet for AP438, version 2.4 issued 11 August 2025, classifies Deozyme as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e under the WHS Regulations, and as \u003cstrong\u003enon-dangerous goods\u003c\/strong\u003e under the ADG Code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal word: WARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSkin Sensitisation, Category 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHazard statement:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317\u003c\/strong\u003e - May cause an allergic skin reaction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eH317 is the one that catches people out.\u003c\/strong\u003e Sensitisation is cumulative and permanent. A technician who decants concentrate bare-handed a few times a week for a year can end up unable to work around the product at all. Glove up for the concentrate even though the working solution is dilute.\u003c\/p\u003e\n\u003cp\u003ePersonal protective equipment Actichem specify for handling the concentrate: safety glasses with side shields, elbow-length protective gloves, and overalls. Maintain adequate ventilation and avoid skin and eye contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransport is a separate question to hazard.\u003c\/strong\u003e The HAZCHEM code is not applicable and the product is not regulated for the transport of dangerous goods. That is a shipping rule. It does not make the product non-hazardous in use, in storage, or on site - the safety data sheet states plainly that this is a hazardous chemical.\u003c\/p\u003e\n\u003cp\u003eRead the full safety data sheet before use, and make sure whoever actually uses the product has a copy.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202508-Actichem-Deozyme-AP438.pdf\"\u003eDownload the Deozyme AP438 Safety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deozyme\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP438.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre (also available in 500 ml trigger spray)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrate - dilute before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear light tan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFloral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e8.5 - 8.8 (mildly alkaline)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive chemistry\u003c\/td\u003e\n\u003ctd\u003eFour enzymes plus Bacillus organisms and a patented odour neutraliser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:32 to 1:16 routine; up to 1:10 on heavy soil; 1:100 as a residual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003ctd\u003eYes, under the WHS Regulations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNo - not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deozyme-500ml\"\u003eDeozyme 500 ml\u003c\/a\u003e - the same product in a ready-to-fill trigger spray pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic 5 Ltr\u003c\/a\u003e - concentrated neutraliser for decaying matter and rotting organic material.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deofresh-citrus-5-ltr\"\u003eDeofresh Citrus 5 Ltr\u003c\/a\u003e - routine carpet deodorising and fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV Citrus 5 Ltr\u003c\/a\u003e - for fogging a whole space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeozyme, Deostor, Deofresh or Odourtak?\u003c\/h2\u003e\n\u003cp\u003eThese four ranges are not interchangeable, and buying the wrong one is the most common mistake with Actichem odour control. The question that sorts them is \u003cstrong\u003ewhere the odour is coming from right now.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeozyme\u003c\/strong\u003e - the source is organic and still present. Waste, decomposition, sewage, spoiled food. It digests the material producing the smell. It is the only one in the range that does that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeostor\u003c\/strong\u003e - the source is a specific residue, most often fire and smoke, or severe persistent odours. It is the heavy neutraliser, and several Deostor products carry a materially higher hazard classification than Deozyme does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeofresh\u003c\/strong\u003e - routine carpet work. Goes into your prespray or your rinse, deals with everyday malodours and leaves a fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdourtak\u003c\/strong\u003e - the odour is in the air and in porous materials across a whole space. It is fogged, not sprayed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does hot water matter?\u003c\/h3\u003e\n\u003cp\u003eDeozyme contains live Bacillus organisms. Hot water, bleach and chlorinated products may kill them. The product will still neutralise odour molecules, but the enzyme digestion - the reason you chose it over a straight neutraliser - stops. Mix it cool.\u003c\/p\u003e\n\u003ch3\u003eHow far does 5 litres go?\u003c\/h3\u003e\n\u003cp\u003eAt the routine 30-60 ml per litre rate, roughly 80 to 165 litres of working solution. At the heavy-soil rate of 100 ml per litre, roughly 50 litres. As a 1:100 residual it goes a great deal further.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on wool?\u003c\/h3\u003e\n\u003cp\u003eYes - Actichem state it is suitable for all wool and synthetic fibres. Pre-test in an inconspicuous spot for dye and fibre stability first, especially on delicate fibres. Note that Deozyme is mildly alkaline at pH 8.5-8.8, which is worth knowing if you are working to a specification that sets a pH range.\u003c\/p\u003e\n\u003ch3\u003eDo I have to rinse it?\u003c\/h3\u003e\n\u003cp\u003eYes, on the surfaces you are cleaning - rinse thoroughly with clean water, and do not let the solution dry on the surface. The exception is the deliberate 1:100 residual on resilient surfaces, which is meant to stay.\u003c\/p\u003e\n\u003ch3\u003eIs Deozyme hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes. Actichem's safety data sheet classifies it as a hazardous chemical under the WHS Regulations, signal word Warning, with a Category 1 skin sensitisation classification. It is not dangerous goods, so it ships unregulated, but that is a transport rule rather than a hazard rating. Wear gloves and eye protection when handling the concentrate.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with a sanitiser to save a step?\u003c\/h3\u003e\n\u003cp\u003eNo. Do not mix Deozyme with any other product. Beyond the usual chemical-compatibility reasons, chlorinated and bleach-based products will kill the organisms doing the work.\u003c\/p\u003e\n\u003ch3\u003eWill it fix the smell on its own?\u003c\/h3\u003e\n\u003cp\u003eOnly if it can reach the source. No deodoriser fixes an odour whose source is still sealed under something - contaminated underlay, a wet subfloor, a cavity. Deozyme is unusually good at dealing with organic material it can actually contact, which is why dwell time and keeping the area moist matter so much.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eThe classic urine call starts with, “I’ve treated the spot three times and it still smells.” The first thing we’d ask is whether the treatment reached everywhere the urine travelled, because the visible mark is often smaller than the affected area underneath. Deozyme also needs time to work — apply it thoroughly, keep it moist during the reaction period and let the enzyme process do its job instead of spraying it on and immediately extracting it back out.\u003c\/p\u003e\n\u003cp\u003eAnother field trap is chemistry. Hot water, chlorine and bleach can kill the active bacteria, and Deozyme shouldn’t be mixed with other products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether you need Deozyme, Deostor, Deofresh or Odourtak for the job in front of you? Ring us before you order and we will talk it through.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":20916909146171,"sku":"AP438.05","price":193.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Deozyme-5ltr.jpg?v=1780550912"},{"product_id":"actichem-biosan-ii-5ltr","title":"Actichem Biosan II 5ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s Biosan II is a \u003cstrong\u003ehospital grade disinfectant\u003c\/strong\u003e and micro-organism decontaminant. It is a single-step, hospital-grade disinfectant with strong cleaning power, effective against a wide variety of pathogenic micro-organisms including viruses, bacteria, fungi, mould and mildew.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKills SARS-CoV-2 (COVID-19 virus). TGA listed — \u003ca href=\"https:\/\/www.tga.gov.au\/resources\/covid-19-disinfectants\/ap439-biosan-ii-everard-paynter-and-keith-paynter-family-trust-ap439-biosan-ii-disinfectant-hospital-grade\"\u003eAUST L 332364\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order, understand what is in the drum.\u003c\/strong\u003e Biosan II is supplied as a \u003cem\u003econcentrate\u003c\/em\u003e, diluted 1:16 to 1:64 before use. \u003cstrong\u003eThe working solution is mild, low-odour and safe around food areas. The concentrate is a corrosive Class 8 dangerous good.\u003c\/strong\u003e Almost everything below follows from that distinction, and earlier versions of this page did not make it.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHospital grade, single step\u003c\/strong\u003e — cleans and disinfects in one pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutstanding cleaning power\u003c\/strong\u003e alongside the biocidal action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePleasant fresh fragrance\u003c\/strong\u003e — lemon verbena.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for food preparation environments\u003c\/strong\u003e at working dilution, with the rinsing note below observed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable on carpets and fabrics\u003c\/strong\u003e at working dilution — with one important exception, see Special Use Notes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaves an active residue\u003c\/strong\u003e that remains effective for hours after cleaning.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKills mould.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — the anti-microbial package is combined with super-wetting technology, enabling the biocide to penetrate more quickly and deeply into fibres and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates odours\u003c\/strong\u003e at their source by anti-microbial action against odour-causing germs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad spectrum of activity\u003c\/strong\u003e against a wide range of micro-organisms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOrganisms Covered by the Listing\u003c\/h2\u003e\n\u003cp\u003eBiosan II is effective against:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eStaphylococcus aureus\u003c\/em\u003e (MRSA \/ golden staph)\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eEscherichia coli\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePseudomonas aeruginosa\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eProteus vulgaris\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eAspergillus brasiliensis\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003ePoliovirus Type 1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSARS-CoV-2 (COVID-19 virus)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSalmonella choleraesuis\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTen minutes dwell time, surface kept visibly wet.\u003c\/strong\u003e That is the step that actually disinfects. A listed product applied for thirty seconds is a clean, not a disinfection — and on a warm or porous surface, keeping it wet for ten minutes usually means a second pass.\u003c\/p\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eDisinfects bio-contaminated surfaces affected by dirty water, flood water, sewage, and human and animal body fluids. Kills mould.\u003c\/p\u003e\n\u003cp\u003eActichem list the following as suitable at working dilution: carpet, natural stone, wool, upholstery, ceramic, porcelain, concrete, masonry, leather, plasterboard, rubber and vinyl.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNot to be used on skin.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot to be used on medical devices or other therapeutic goods.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecial Use Notes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e🔴 Biosan II will affect the stain-resistant treatment on 5th and 6th generation nylon.\u003c\/strong\u003e This is the most commercially important line on the page for a carpet cleaner. Those carpets carry a manufacturer’s stain-resist warranty, and stripping the treatment is not something a rinse will fix. Identify the fibre and the generation before you disinfect residential or hospitality nylon, and if you cannot, pre-test in a wardrobe and tell the client what you have found.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not mix Biosan II with detergents or other chemicals.\u003c\/strong\u003e Biosan II is a quaternary ammonium compound, and \u003cstrong\u003eQACs are deactivated by anionic detergent residue.\u003c\/strong\u003e That is not just a safety instruction — a QAC applied over an unrinsed anionic prespray simply does not disinfect. Clean, rinse, then disinfect, and rinse your equipment before changing over.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eObserve all safety directions and read the SDS before use.\u003c\/li\u003e\n\u003cli\u003ePre-cleaning and prior removal of organic load will enhance results. Organic soil consumes biocide.\u003c\/li\u003e\n\u003cli\u003eFollow certified disaster restoration guidelines for positive sanitisation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:16\u003c\/strong\u003e (64 ml per litre) — positive disinfection, decontamination and mould remediation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:64 to 1:50\u003c\/strong\u003e (16 to 20 ml per litre) — clean surface disinfection and odour control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eOur specification block previously listed 1:16 to 1:32. Actichem’s current directions give the two ratios above, and we have published those.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution to a workable area using a sprayer, sponge or scrubber machine.\u003c\/li\u003e\n\u003cli\u003eAgitate and allow \u003cstrong\u003e10 minutes dwell time\u003c\/strong\u003e, keeping the surface wet.\u003c\/li\u003e\n\u003cli\u003eRinse the surface using clean water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt 1:64, Biosan II does not need to be rinsed.\u003c\/strong\u003e If left to air dry, a residual coating remains for extended protection from micro-organisms.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFood premises:\u003c\/strong\u003e the 1:64 no-rinse method is what makes Biosan II convenient in food environments. Where a food contact surface is involved, follow your food safety plan — many require a potable rinse regardless of the product.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page described Biosan II as completely non-toxic, non-corrosive, neutral pH and non-hazardous. All four of those statements were wrong for the concentrate, and we have corrected them.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are a fair description of the \u003cem\u003ediluted working solution\u003c\/em\u003e, which is what most users ever touch. They are not a description of what arrives in the drum.\u003c\/p\u003e\n\u003cp\u003eBiosan II concentrate is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e10.5\u003c\/strong\u003e — our page previously said 7.5 and described the product as neutral pH\u003c\/li\u003e\n\u003cli\u003eActives: quaternary ammonium compound blend, EDTA tetrasodium salt, isopropanol and two proprietary surfactants — each below 10%\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN3267, Class 8, Packing Group II.\u003c\/strong\u003e DG shipping surcharge applies.\u003c\/li\u003e\n\u003cli\u003ePoisons schedule: not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOn “non-corrosive and safe on metal surfaces”.\u003c\/strong\u003e The diluted solution is fine on metal. The concentrate is classified corrosive and ships as Class 8. Do not decant it into unlined metal containers and do not leave concentrate standing on metal.\u003c\/p\u003e\n\u003ch3\u003eConcentrate and working solution are not the same product\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eBiosan II concentrate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eBiosan II RTU\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eHazardous chemical, dangerous goods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-hazardous, non-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statement\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUN3267, Class 8, PG II\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot regulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003ctd\u003e8 – 9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQAC content\u003c\/td\u003e\n\u003ctd\u003eBlend, under 10%\u003c\/td\u003e\n\u003ctd\u003eUnder 1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you want the performance without handling a Class 8 corrosive, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-biosan-ii-wipes\"\u003eBiosan II Wipes\u003c\/a\u003e and the ready-to-use presentation exist for exactly that reason.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies neoprene chemical protective gloves, safety glasses with side shields or chemical goggles, barrier cream and access to an eyewash unit. \u003cstrong\u003eWear them when decanting and diluting\u003c\/strong\u003e — that is the only step at which you handle the concentrate, and it is the step people skip because the working solution is so mild.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush continuously with running water for at least 15 minutes. Obtain medical attention without delay — H314 means eye damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with large amounts of water. Seek medical attention.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe SDS lists no known incompatible materials for storage, which is unusual in this range and worth noting honestly. The practical restrictions come from the chemistry rather than the hazard:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnionic detergents deactivate QACs.\u003c\/strong\u003e Do not mix Biosan II with detergents or other chemicals, and rinse equipment before changeover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with acids or oxidisers\u003c\/strong\u003e as a general rule — not because Biosan II is unusually reactive, but because nothing is gained and the disinfectant is destroyed. That includes \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eChlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003ePerox\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e and the other acid restorers.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDilute into water, not into another product.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP439.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eARTG listing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eAUST L 332364\u003c\/strong\u003e — hospital grade disinfectant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eLight tan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eLemon Verbena\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — disinfection, decontamination, mould\u003c\/td\u003e\n\u003ctd\u003e1:16 (64 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — clean surface and odour control\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:64 (16 to 20 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 minutes, surface kept wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRinse\u003c\/td\u003e\n\u003ctd\u003eRequired at 1:16; not required at 1:64 if air dried\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActives\u003c\/td\u003e\n\u003ctd\u003eQuaternary ammonium compound blend, EDTA tetrasodium, isopropanol — each \u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN3267, Class 8, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDo not use on\u003c\/td\u003e\n\u003ctd\u003eSkin; medical devices or other therapeutic goods; 5th and 6th generation stain-resist nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 4.3, issued 11 August 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-biosan-ii-20-ltr\"\u003eActichem Biosan II 20 Ltr\u003c\/a\u003e — the production pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-biosan-ii-wipes\"\u003eActichem Biosan II Wipes\u003c\/a\u003e — ready to use, no dilution and no Class 8 concentrate to handle\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e — the peroxide alternative, also hospital grade and TGA listed (AUST L 332284), signal word WARNING and \u003cstrong\u003enot\u003c\/strong\u003e dangerous goods. Worth comparing if the Class 8 concentrate is a problem for your storage or freight.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — non-classified peroxide product for lighter work with no listing requirement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tga.gov.au\/resources\/covid-19-disinfectants\/ap439-biosan-ii-everard-paynter-and-keith-paynter-family-trust-ap439-biosan-ii-disinfectant-hospital-grade\"\u003eTGA listing — AUST L 332364\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Biosan-ll-info-sheet.pdf\"\u003eProduct Information Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202508-Actichem-Biosan-II-AP439.pdf\"\u003eSafety Data Sheet — version 4.3, issued 11 August 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP439.05\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDisinfecting stain-resist nylon, or working to a scope that names a specific listed product? Contact Carpet Cleaners Warehouse before you order. Biosan II and Percide are both hospital grade and TGA listed, and which one suits depends on the substrate, the storage you have, and what your scope actually requires.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":20916972814395,"sku":"AP439.05","price":115.67,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Biosan-II-5ltr.jpg?v=1780550913"},{"product_id":"actichem-fire-fix-5ltr","title":"Actichem Fire Fix 5ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Fire Fix is a \u003cstrong\u003esolvent-free, non-caustic restoration cleaner\u003c\/strong\u003e for removing ingrained soils, carbon, soot, fire residues and rubber from hard and semi-porous surfaces.\u003c\/p\u003e\n\u003cp\u003eIt is a highly concentrated multi-surface heavy-duty industrial cleaner for floors, walls, carpets, hard surfaces and porous surfaces, across professional cleaning and disaster restoration work. It is also an excellent cleaner for safety flooring.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire and smoke restoration\u003c\/strong\u003e — a highly concentrated cleaner built for fire and smoke damage work rather than adapted to it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy soiling\u003c\/strong\u003e — removes oil, soot, smoke deposits, particulate and carbon soiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetrating action\u003c\/strong\u003e — lifts and suspends soils from smooth and porous surfaces alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharged soils\u003c\/strong\u003e — very effective on filtration soiling, ventilation dust and olefin carpet cleaning. This is a genuinely useful property: charged soils are electrostatically bound to the fibre and resist ordinary detergents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent free, no caustics\u003c\/strong\u003e — a water-based low VOC formulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree rinsing\u003c\/strong\u003e — designed to rinse out with clear water, which matters on a restoration job where residue means re-soiling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e5 litre\u003c\/strong\u003e pack. At 1:50 that makes 250 litres of working solution, so it goes further than it looks. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-20-ltr\"\u003e20 litre\u003c\/a\u003e suits restoration contractors working fire jobs regularly.\u003c\/p\u003e\n\u003ch2\u003eWhere to use it\u003c\/h2\u003e\n\u003cp\u003eSuitable for carpeting and hard surfaces affected by smoke damage, soot and heavy soiling.\u003c\/p\u003e\n\u003ch3\u003eImportant — where not to use it\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use on water-sensitive fabrics, unsealed timber, aluminium, or other delicate surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe aluminium exclusion is the one people forget.\u003c\/strong\u003e Fire Fix is alkaline, and alkaline solutions attack aluminium — window frames, door tracks, kick plates, light fittings, ducting and appliance panels are all commonly aluminium and all commonly adjacent to the surfaces you are cleaning after a fire. Mask them, or accept that you will be replacing them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlways pre-test in an inconspicuous area before proceeding.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eShake well before use.\u003c\/strong\u003e Fire Fix is concentrated enough that it will separate in the container. That is normal — but a drum that has not been shaken will dose inconsistently and give you variable results across a job.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNormal soil\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–20 ml per litre of warm water (1:100 to 1:50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeavy soil and restoration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 ml per litre of warm water (1:20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCeiling cleaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdd 50 ml \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eOxyboost\u003c\/a\u003e per 5 litres of Fire Fix solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressure washing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 part Fire Fix to 4 parts water, metered at the desired setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNote the range.\u003c\/strong\u003e Fire Fix runs from 1:100 to 1:20 — a five-fold difference. Starting at the strong end on every job is expensive and increases the risk to sensitive surfaces. Start at the weakest dilution that will do the work and step up only where the soil demands it.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply by sprayer, sponge or floor machine.\u003c\/li\u003e\n\u003cli\u003eAllow \u003cstrong\u003e10 to 15 minutes contact time.\u003c\/strong\u003e This product works on dwell — scrubbing immediately instead of waiting is the most common way to waste it.\u003c\/li\u003e\n\u003cli\u003eFor heavy soil, scrub if needed, then rinse the surface thoroughly with clean water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarpets and fabrics should be extraction rinsed\u003c\/strong\u003e with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-5-ltr\"\u003eActichem Rinse Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor ceilings, apply the Fire Fix and Oxyboost solution with specialised spray equipment.\u003c\/li\u003e\n\u003cli\u003eCover all sensitive furnishings before you start.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e⚠ A word about ceiling work\u003c\/h3\u003e\n\u003cp\u003eSpraying an alkaline cleaner onto a ceiling means the solution comes back down — onto your face, into your eyes, and onto everything below. \u003cstrong\u003eGiven the H318 classification below, ceiling application is the highest-risk task this product is used for.\u003c\/strong\u003e Chemical goggles are not optional for it, and full head and face protection is sensible. Mask the floor and contents before you start, not after the first pass.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety: Irritant”. That understated it\u003c\/strong\u003e and has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for DR986, version 2.1 issued 24 May 2021, classifies Fire Fix as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage (Category 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation (Skin Corrosion\/Irritation Category 2)\u003c\/li\u003e\n\u003cli\u003eNot a dangerous good. No poisons schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H318 — serious eye damage\u003c\/h3\u003e\n\u003cp\u003eThis is the highest eye classification in the GHS system. \u003cstrong\u003eDamage, not irritation\u003c\/strong\u003e — a splash of the concentrate can cause permanent injury. “Irritant” was the wrong word for it.\u003c\/p\u003e\n\u003cp\u003eThe concentrate is \u003cstrong\u003epH 11\u003c\/strong\u003e, driven by tetrapotassium pyrophosphate and monoethanolamine. Alkaline eye injuries are characteristically \u003cstrong\u003epainless at first and progressive\u003c\/strong\u003e, which is why people under-react to them. \u003cstrong\u003eChemical goggles whenever the concentrate is decanted or diluted, and whenever solution is sprayed overhead.\u003c\/strong\u003e Flush for 10 to 15 minutes if it happens, and get it looked at.\u003c\/p\u003e\n\u003ch3\u003e⚠ Prolonged contact\u003c\/h3\u003e\n\u003cp\u003eRestoration work is long. You are in a fire-damaged property for hours with solution running down your arms off overhead surfaces. \u003cstrong\u003eCumulative exposure is what causes the skin problems on these jobs\u003c\/strong\u003e, not a single splash. Wear proper protective clothing and change out of anything that gets soaked.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eActichem’s sheet records incompatible materials as \u003cstrong\u003e“none known”\u003c\/strong\u003e. We do not think that is complete for an alkaline product at pH 11, and we have raised it with them. As a working rule: \u003cstrong\u003edo not mix Fire Fix with acids or with any chlorine or hypochlorite product\u003c\/strong\u003e, and do not add anything to it other than Oxyboost as directed above.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water for \u003cstrong\u003e10 to 15 minutes\u003c\/strong\u003e, holding the eyelids apart. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately remove contaminated clothing. Flush skin and hair with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Immediately give a glass of water. Seek medical advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eDR986.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAlkaline, solvent-free heavy duty restoration cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear yellow liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eLemon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:100 to 1:20 depending on soil; 1:4 for pressure washing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e11\u003c\/strong\u003e as concentrate (Actichem SDS). This listing previously stated 9.9–10.4; we have asked Actichem to confirm which figure is current.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eTetrapotassium pyrophosphate (CAS 7320-34-5) 10–30%; EDTA tetrasodium salt (CAS 64-02-8) under 10%; sodium benzoate (CAS 532-32-1) under 10%; monoethanolamine (CAS 141-43-5) under 10%; nonylphenol ethoxylate (CAS 9016-45-9) under 10%; proprietary surfactants under 10% each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot suitable for\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWater-sensitive fabrics, unsealed timber, aluminium, delicate surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.1, issued 24 May 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFire Fix or Fire Restore?\u003c\/h2\u003e\n\u003cp\u003eBoth are Actichem restoration cleaners and they are not the same product.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire Fix\u003c\/strong\u003e (this product) — pH 11, DANGER with H315 and H318, no poisons schedule. Solvent-free and non-caustic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eFire Restore\u003c\/a\u003e\u003c\/strong\u003e — pH 12.8, DANGER with \u003cstrong\u003eH314, severe skin burns and eye damage\u003c\/strong\u003e, and \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e. A materially more aggressive product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFire Fix is the one to reach for first.\u003c\/strong\u003e Where it will do the job, it is the lower-hazard product by a clear margin. Step up to Fire Restore when the soil genuinely demands it, not by default.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-20-ltr\"\u003eActichem Fire Fix 20 litre\u003c\/a\u003e — the same product in the bulk pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eActichem Fire Restore\u003c\/a\u003e — the heavier-duty restoration cleaner. Read the comparison above before choosing.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eActichem Oxyboost Plus\u003c\/a\u003e — the oxygen booster used with Fire Fix for ceiling work.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-5-ltr\"\u003eActichem Rinse Pro\u003c\/a\u003e — the recommended extraction rinse for carpets and fabrics after Fire Fix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202105-Actichem-Fire-Fix-DR986.pdf\"\u003eActichem Fire Fix safety data sheet (DR986, version 2.1, 24 May 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: DR986.05\u003c\/p\u003e\n\u003cp\u003eWorking a fire job and not sure whether Fire Fix or Fire Restore suits the surfaces in front of you? Tell us what you are dealing with. Getting this choice right saves both chemical cost and the risk of damaging something you then have to replace.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5L","offer_id":20921776046139,"sku":"DR986.05","price":101.26,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Fire-Fix-5ltr.jpg?v=1780550929"},{"product_id":"actichem-fire-restore-5ltr","title":"Actichem Fire Restore 5ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Fire Restore cuts through the tough oily soils created by fire activity and the resulting smoke and soot.\u003c\/p\u003e\n\u003cp\u003eWhere a fire has consumed synthetic materials — paint, plastics, rubber — the soot deposits contain significant amounts of \u003cstrong\u003eoils and resins\u003c\/strong\u003e, and those penetrate deep into porous surfaces. That is why soot on masonry does not respond to ordinary detergents: you are not cleaning off dust, you are cleaning out an oily resin that has soaked in. Fire Restore is formulated to penetrate resilient porous surfaces and release those deposits.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e5 litre\u003c\/strong\u003e pack. At 1:10 that makes 50 litres of working solution — enough for a moderate job. Structural fire work covers large areas fast, so the \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-20l\"\u003e20 litre\u003c\/a\u003e is usually the right buy for restoration contractors.\u003c\/p\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eresilient surfaces\u003c\/strong\u003e including tiles, concrete, masonry, terracotta, natural stone and unsealed lino.\u003c\/p\u003e\n\u003cp\u003eMost painted concrete floors, powder-coated metals, zincalume, construction timber and structural steel can also be cleaned with Fire Restore, \u003cstrong\u003ebut pre-test for substrate chemical sensitivity first.\u003c\/strong\u003e If you strike a sensitive substrate, try a weaker dilution or switch to \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for area\u003c\/strong\u003e — designed for fast removal of soot from resilient surfaces where the areas to be cleaned are large. On a structural fire job the economics are driven by square metres, not by bottles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetrating chemistry\u003c\/strong\u003e — releases ingrained soils and micro-size smoke particles from porous and semi-porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e — also effective on general grime and oils on tiles, masonry and concrete outside restoration work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour control\u003c\/strong\u003e — this is the part people underestimate. \u003cstrong\u003eSoot removal is odour removal.\u003c\/strong\u003e You cannot deodorise a surface that is still holding oily smoke residue; sealing or fogging over it buys weeks, not years. Effective removal of the soiling is an integral part of eliminating the associated odour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal to moderate soil\u003c\/strong\u003e — 50–100 ml per litre of water (1:20 to 1:10).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy soil\u003c\/strong\u003e — up to 200 ml per litre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitive surfaces\u003c\/strong\u003e — always pre-test, and consider a weaker dilution or Fire Fix instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover areas not being cleaned.\u003c\/strong\u003e On a fire job that means most of the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly apply solution to an area you can clean and rinse within 30 to 40 minutes.\u003c\/strong\u003e Working in sections is not a suggestion — see the note below.\u003c\/li\u003e\n\u003cli\u003eApply with a sprayer, sponge or scrubber machine. \u003cstrong\u003eDo not allow the solution to dry onto the surface.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAgitate and allow \u003cstrong\u003e10 to 15 minutes dwell.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRe-agitate areas of heavy soiling.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water. A high-pressure washing system gives the best result.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e⚠ Why the 30 to 40 minute working area matters\u003c\/h3\u003e\n\u003cp\u003eFire Restore is \u003cstrong\u003epH 12.8\u003c\/strong\u003e. If it dries on the surface you have a concentrated caustic residue sitting on the substrate with nothing left to carry it away — which is how etching, staining and coating damage happen, and how a job that was going well turns into a repair. It also makes the residue far harder to rinse.\u003c\/p\u003e\n\u003cp\u003eWork in sections you can finish. On a hot day or in a building with air movers running, make the sections smaller, not larger.\u003c\/p\u003e\n\u003ch3\u003eAdding Oxyboost Plus — odour control and stain removal\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eOxyboost Plus\u003c\/a\u003e is a concentrated oxygen oxidising powder. Added to diluted Fire Restore it oxidises malodour molecules and lifts stubborn stains.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix the Fire Restore solution using \u003cstrong\u003ewarm water, 40–60 °C.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd \u003cstrong\u003e10–20 grams of Oxyboost Plus per litre\u003c\/strong\u003e of ready-to-use Fire Restore solution. Stir well to dissolve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the solution within 30 minutes.\u003c\/strong\u003e Oxygen chemistry starts working the moment it dissolves — a bucket mixed an hour ago is largely spent, and you are then cleaning with plain Fire Restore while paying for Oxyboost.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003ePlease read this section before your next job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously stated that Fire Restore “is not classified as dangerous goods” and that this makes it “substantially safer in use and in transport”. The second half of that was wrong and we have removed it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDangerous goods classification is a \u003cstrong\u003etransport\u003c\/strong\u003e classification. It describes the risk of carrying a substance in a vehicle. \u003cstrong\u003eIt says nothing about how safe a product is to use\u003c\/strong\u003e, and Fire Restore is a clear example of why the two should never be conflated: it is not regulated for transport, and it is also \u003cstrong\u003ethe most severely classified product in our fire restoration range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for DR164, version 5.1 issued 24 May 2021, classifies Fire Restore as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes \u003cstrong\u003esevere skin burns and eye damage\u003c\/strong\u003e (Skin Corrosion Category 1B, Serious Eye Damage Category 1)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHAZCHEM \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H314 — severe skin burns and eye damage\u003c\/h3\u003e\n\u003cp\u003eH314 is a \u003cstrong\u003ecorrosive\u003c\/strong\u003e classification. It is a step above the H315 skin irritation and H318 eye damage carried by Fire Fix: this product will burn skin, not merely irritate it.\u003c\/p\u003e\n\u003cp\u003eThe concentrate is \u003cstrong\u003epH 12.8.\u003c\/strong\u003e Two things about alkaline burns that catch people out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey do not hurt straight away.\u003c\/strong\u003e Acid burns announce themselves; alkali burns are often painless at first, so the natural reaction is to finish what you are doing and wash it off later. By then the damage is done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey keep going.\u003c\/strong\u003e Alkalis saponify skin and continue penetrating until they are physically removed. That is why the first aid below says flush \u003cem\u003econtinuously\u003c\/em\u003e, and why a quick rinse is not enough.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles and full protective clothing\u003c\/strong\u003e whenever the concentrate is handled, and whenever solution is applied overhead or by pressure washer. An eyewash unit should be on site. If concentrate contacts skin, \u003cstrong\u003eflush the body and clothing with large amounts of water immediately\u003c\/strong\u003e and keep flushing.\u003c\/p\u003e\n\u003ch3\u003e⚠ Poisons Schedule 6\u003c\/h3\u003e\n\u003cp\u003eSchedule 6 brings labelling and storage obligations. Keep it in its original labelled container, store it securely away from food and out of reach of children, and do not decant it into anything unlabelled.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAvoid acids and oxidising agents.\u003c\/strong\u003e Do not mix Fire Restore with acidic cleaners, and do not add chlorine or hypochlorite products to it. The one addition Actichem sanctions is Oxyboost Plus at the rate given above.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Immediately hold the eyelids apart and flush the eye \u003cstrong\u003econtinuously\u003c\/strong\u003e with running water. Seek medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately flush the body and clothing with \u003cstrong\u003elarge amounts of water\u003c\/strong\u003e. Remove contaminated clothing while flushing. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Remove to fresh air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Immediately give a glass of water. Seek medical attention without delay.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eDR164.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHighly alkaline soot and smoke residue cleaner for resilient surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear blue liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild pine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:20 to 1:10; up to 200 ml\/L for heavy soil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.8\u003c\/strong\u003e as supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003ePotassium pyrophosphate (CAS 7320-34-5); EDTA tetrasodium salt (CAS 64-02-8); monoethanolamine (CAS 141-43-5); ethylene glycol monobutyl ether (CAS 111-76-2); nonylphenol ethoxylate (CAS 9016-45-9). All under 10%.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids and oxidising agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — severe skin burns and eye damage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eActichem states not regulated for transport. \u003cstrong\u003eThis is a transport classification only and does not indicate the product is mild in use.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 5.1, issued 24 May 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFire Restore or Fire Fix?\u003c\/h2\u003e\n\u003cp\u003eBoth are Actichem restoration cleaners. They are not interchangeable, and the difference is significant.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFire Fix\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eFire Restore\u003c\/strong\u003e (this product)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12.8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314 — corrosive\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest on\u003c\/td\u003e\n\u003ctd\u003eCarpets, fabrics, general surfaces, safety flooring\u003c\/td\u003e\n\u003ctd\u003eResilient surfaces — masonry, concrete, tile, stone — over large areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReach for \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e first.\u003c\/strong\u003e Where it will do the job it is the lower-hazard product by a clear margin, and it is the one suited to carpets and fabrics. Fire Restore is the right tool when you are working oily soot out of masonry, concrete and stone over large areas — not the default for every fire job.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-20l\"\u003eActichem Fire Restore 20 litre\u003c\/a\u003e — the same product in the bulk pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — the lower-hazard restoration cleaner. Read the comparison above.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eActichem Oxyboost Plus\u003c\/a\u003e — oxygen booster for odour control and stain removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202105-Actichem-Fire-Restore-DR164.pdf\"\u003eActichem Fire Restore safety data sheet (DR164, version 5.1, 24 May 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: DR164.05\u003c\/p\u003e\n\u003cp\u003eDG shipping surcharge applies.\u003c\/p\u003e\n\u003cp\u003eScoping a fire job and unsure which product suits the surfaces involved? Tell us what you are dealing with. Choosing correctly saves chemical cost and avoids damaging a substrate you then have to make good.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5L","offer_id":20921810550843,"sku":"DR164.05","price":83.71,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Fire-Restore-5ltr.jpg?v=1780550930"},{"product_id":"actichem-oxy-boost-plus-1kg","title":"Actichem Oxyboost Plus 1kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Oxyboost Plus is a super-concentrate oxidising compound designed for use both as an additive to cleaning solutions and as a stand-alone product. It provides powerful oxidising activity to cleaning solutions, with particular applications in fire restoration, stain removal and deodorising.\u003c\/p\u003e\n\u003cp\u003eIt derives its oxidising capability from \u003cstrong\u003epotentiated sodium percarbonate\u003c\/strong\u003e, which provides maximum oxygen release even at ambient temperatures. The ready-to-use solution is alkaline. It therefore offers unique performance for both hard and soft surface cleaning applications where the oxidising ability of hydrogen peroxide is limited.\u003c\/p\u003e\n\u003cp\u003eThis 1 kg pail is the trial and van-stock size. At 10 to 20 g per litre it makes 50 to 100 litres of working solution.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStain removal\u003c\/strong\u003e — powerful on tannin and colour stains such as soft drink, cordial, grass, blood and many other organic stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning booster\u003c\/strong\u003e — adding Oxyboost Plus to your cleaning solution significantly enhances results, as its oxidising and destaining power removes many soils that would otherwise be left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightens colours\u003c\/strong\u003e — enhances and brightens the colours of fabrics and carpets, and overcomes dullness and greying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFibre safe\u003c\/strong\u003e — suitable on all synthetic and most delicate fibres and fabrics, including coloured fabrics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser friendly\u003c\/strong\u003e — low-odour formula.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable on practically all water-cleanable surfaces, including painted walls, ceilings, carpets, soft furnishings, lacquered wood, metals, tiles, lino, natural stone and concrete. Care should be taken with pH-sensitive substrates such as natural fibres. A neutralising acid rinse after cleaning is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on the acid rinse.\u003c\/strong\u003e Do that as a separate, later step on a rinsed surface — never by adding acid to an Oxyboost solution. See the reactivity section below.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity. Best performance is obtained in hot solutions.\u003c\/p\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdd \u003cstrong\u003e10 to 20 g\u003c\/strong\u003e Oxyboost Plus per litre of water or ready-to-use cleaning solution.\u003c\/li\u003e\n\u003cli\u003eFor heavy-duty conditions, up to \u003cstrong\u003e30 g\/L\u003c\/strong\u003e can be added.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOxyboost Plus must not be added to acidic solutions, deodorisers, chlorine or enzyme products.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIt can be added to fire restoration detergents, carpet and upholstery presprays, alkaline tile-cleaning detergents, and water-based degreasers.\u003c\/li\u003e\n\u003cli\u003eWarm or hot water and cleaning solutions will improve performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir well and use the solution within 30 minutes.\u003c\/strong\u003e Once mixed, the oxygen is being released whether you use it or not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHard surface and carpet cleaning\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCover areas not being cleaned. Only apply solution to an area that can be cleaned and rinsed within 30 to 40 minutes.\u003c\/li\u003e\n\u003cli\u003eApply the solution to a workable area using a sprayer, sponge or scrubber machine.\u003c\/li\u003e\n\u003cli\u003eAgitate and allow 15 to 30 minutes dwell time.\u003c\/li\u003e\n\u003cli\u003eRinse the surface thoroughly with clean water. Carpets and soft furnishings are best rinsed using wet extraction equipment with a 1:100 \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-20-ltr\"\u003eRinse Pro\u003c\/a\u003e solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpot removal from carpets and fine stone\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAdd Oxyboost Plus to a warm or hot prespray or tile cleaning solution — \u003cstrong\u003enon-acidic\u003c\/strong\u003e. Neutral pH product solutions generally work best. The solution can also be made up with water alone.\u003c\/li\u003e\n\u003cli\u003eApply to the affected area.\u003c\/li\u003e\n\u003cli\u003eAgitate, allow 15 to 30 minutes dwell time, and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water, or wet-extract with a 1:100 Rinse Pro solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e spot removal on marble and other porous hard surfaces can also be achieved by applying one scoop of Oxyboost Plus powder directly to the surface. Apply a little hot water, then use a non-scratch scourer to mix and scrub the spot until a paste forms. Allow 10 to 15 minutes dwell time. Scrub again and rinse with clean water.\u003c\/p\u003e\n\u003ch3\u003eGarments and loose furnishings\u003c\/h3\u003e\n\u003cp\u003eEnsure items are water-washable — check for special washing directions from the manufacturer first.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix a soak solution of 200 to 500 ml \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e per 10 litres of warm or hot water, or commercial laundry liquid or powder. Add 50 to 100 g Oxyboost Plus. Mix well.\u003c\/li\u003e\n\u003cli\u003eSoak affected garments and loose furnishings for 1 to 4 hours.\u003c\/li\u003e\n\u003cli\u003eRinse well in clean warm water.\u003c\/li\u003e\n\u003cli\u003eMachine-washable garments should then be laundered as usual. Loose furnishings should be rinsed in a warm 1:200 Rinse Pro solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eOur page has always carried “Safety profile: Class 5.1 Oxidising Agent”, which is correct. \u003cstrong\u003eBut a transport class tells you nothing about PPE, first aid, or the fire risk this product carries on a job site.\u003c\/strong\u003e The full classification is below.\u003c\/p\u003e\n\u003cp\u003eOxyboost Plus is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH272\u003c\/strong\u003e — may intensify fire; oxidiser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH302\u003c\/strong\u003e — harmful if swallowed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH335\u003c\/strong\u003e — may cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003eAUH: repeated exposure may cause skin dryness and cracking\u003c\/li\u003e\n\u003cli\u003eGHS: \u003cstrong\u003eOxidising Solid Category 2\u003c\/strong\u003e; Acute Toxicity (Oral) Cat 4; Skin Corrosion\/Irritation Cat 2; Serious Eye Damage Cat 1; STOT SE Cat 3\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e1Y\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e10.0\u003c\/strong\u003e — our page previously said 11\u003c\/li\u003e\n\u003cli\u003eComposition: \u003cstrong\u003esodium percarbonate, greater than 60%\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN3378, Class 5.1 oxidising solid, Packing Group II\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIt is a powder, and that changes how you handle it.\u003c\/strong\u003e H335 and H318 both apply to airborne dust. Decant slowly and low, do not tip from height, and do not scoop into the airflow of a fan or air mover. Wear the goggles when opening the pail — a puff of alkaline oxidiser dust in the eye is the realistic injury with this product.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles and a full face shield\u003c\/strong\u003e, neoprene chemical protective gloves, overalls and a PVC apron, with access to an eyewash unit and a safety shower.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush continuously with running water for at least 15 minutes. Obtain medical attention without delay — H318 means the damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with running water. Seek medical attention if irritation develops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e H302 applies. Rinse the mouth, do not induce vomiting, and seek medical advice.\u003c\/p\u003e\n\u003ch2\u003e🔴 Fire Risk — the part most people do not know\u003c\/h2\u003e\n\u003cp\u003eOxyboost Plus is an \u003cstrong\u003eoxidiser\u003c\/strong\u003e. It does not burn, but it makes other things burn far more readily, and it can start a fire with no ignition source at all.\u003c\/p\u003e\n\u003cp\u003eThe SDS states that \u003cstrong\u003econtact with combustible material — wood, paper, cloth, sawdust — may produce spontaneous combustion or violent decomposition.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn a job site that means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not sweep spilled powder into a bin with paper, cloth or sawdust.\u003c\/strong\u003e Collect it separately and flush the area with plenty of water.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not store the pail on or near timber offcuts, rags, cardboard or absorbent granules.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not leave cloths or towels loaded with concentrated powder or paste balled up in a bucket or van.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the lid closed and keep it dry.\u003c\/strong\u003e Moisture starts the oxygen release, and a sealed container of reacting percarbonate will pressurise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the same hazard family as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e, our 50% hydrogen peroxide, and it deserves the same respect.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid, Chlorine, Deodorisers or Enzymes\u003c\/h2\u003e\n\u003cp\u003eThe four exclusions already on this page are correct, and the SDS explains why. Oxyboost Plus is incompatible with \u003cstrong\u003eacids, reducing agents, alkalis, organic solvents, metallic salts and combustible organic matter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcids\u003c\/strong\u003e — destroy the alkaline percarbonate chemistry and can generate heat and rapid gas evolution. Never add to \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eGrout Restore 60\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or any acid rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChlorine\u003c\/strong\u003e — never combine with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eChlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e, pool chlorine or any hypochlorite. Two oxidisers together give you no extra performance and an unpredictable reaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnzyme products\u003c\/strong\u003e — the oxidiser destroys the enzyme. You lose both products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeodorisers\u003c\/strong\u003e — oxidised fragrance chemistry gives unpredictable and often unpleasant results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvents and organic matter\u003c\/strong\u003e — combustion risk, as above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMetallic salts are named as incompatible.\u003c\/strong\u003e The surface list above includes metals, and that is correct for the diluted working solution on a sound surface — but avoid contact between the neat powder and rusted or corroded metal, which catalyses rapid decomposition.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP446.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm\u003c\/td\u003e\n\u003ctd\u003eWhite powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eSodium percarbonate, greater than 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e10 to 20 g per litre; up to 30 g\/L heavy duty; 50 to 100 g per 10 L soak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage per pack\u003c\/td\u003e\n\u003ctd\u003e50 to 100 litres of working solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolution life\u003c\/td\u003e\n\u003ctd\u003eUse within 30 minutes of mixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e15 to 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH272, H302, H315, H318, H335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e1Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN3378, Class 5.1 oxidising solid, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDo not mix with\u003c\/td\u003e\n\u003ctd\u003eAcids, chlorine products, deodorisers, enzyme products, reducing agents, organic solvents, metallic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeep away from\u003c\/td\u003e\n\u003ctd\u003eWood, paper, cloth, sawdust and other combustible material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 26 May 2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Actichem’s current published sheet for this product is dated May 2022 and is the oldest in their range. We have asked them for a current version and will update this page when it is issued.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eActichem Oxyboost Plus 4.5 kg\u003c\/a\u003e — the same product in the production pail\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e — 50% hydrogen peroxide, liquid. Same oxidising role, higher hazard, and a Class 5.1 liquid rather than a solid.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-20-ltr\"\u003eActichem Rinse Pro\u003c\/a\u003e — the 1:100 rinse specified in the methods above\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — the soak partner for garments and loose furnishings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202207-_Actichem-Oxyboost-Plus-AP446.pdf\"\u003eActichem Oxyboost Plus Safety Data Sheet — version 2.3, issued 26 May 2022\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP446.01\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorking a fire job and unsure whether to boost with Oxyboost Plus or use a peroxide liquid? Contact Carpet Cleaners Warehouse. The right oxidiser depends on the substrate, the soil and how long you have on site.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"1KG","offer_id":20928449413179,"sku":"AP446.01","price":42.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Oxyboost-Plus-1kg.jpg?v=1780550930"},{"product_id":"actichem-percide-boost-500ml","title":"Actichem Percide Boost 500ml","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s Percide Boost accelerates the micro-organism killing power and destaining ability of \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003ePercide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePercide Boost is an activator, not a stand-alone product.\u003c\/strong\u003e It is added to Percide at 1 part Boost to 9 parts Percide. With that easy 1:9 mixing ratio it is convenient in use and produces dramatic results — everything the original Percide offers, but faster, and on heavy-duty work with less effort. \u003cstrong\u003eThis 500 ml pack is matched to a 5 litre Percide\u003c\/strong\u003e, which is the pairing most remediation contractors want.\u003c\/p\u003e\n\u003cp\u003eTake mould eradication as a case in point: the 1:9 Percide Boost and Percide mix destroys mould in five minutes. Percide’s peroxide formula has a lethal effect on mould spores, and when mixed with Percide Boost the hydroxyl reaction on mould growth is dramatically accelerated. That reduces the time required to eliminate spores and to lift and remove discolouration and soiling.\u003c\/p\u003e\n\u003cp\u003eActichem report that the Percide and Percide Boost mix takes only 5 minutes to achieve a greater than 4.5 log reduction when tested against \u003cem\u003eAspergillus brasiliensis\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety section before you open this container.\u003c\/strong\u003e Percide on its own is a mild product — signal word WARNING, not classified as dangerous goods. \u003cstrong\u003ePercide Boost is not.\u003c\/strong\u003e It is a corrosive Class 8 dangerous good. The two are sold together and used together, and their pages have not made that difference clear until now.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced peroxide formula\u003c\/strong\u003e — Percide comprises a unique peroxide formula for disinfection and mould eradication performance in an easy-to-use form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — the anti-microbial package is combined with super-wetting technology, enabling the biocide to penetrate faster and deeper into the inner structure of fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning and destaining\u003c\/strong\u003e — lifts mould from surface pores and provides cleaning and destaining action on mould and bacterial discolouration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates odours\u003c\/strong\u003e — at their source, by anti-microbial action against odour-causing germs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInherently biodegradable\u003c\/strong\u003e — an environmentally responsible choice at working dilution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eObserve all safety directions and read the SDS before use.\u003c\/li\u003e\n\u003cli\u003ePercide is suitable on most carpets and fabrics; some delicate fibres, and fibres destabilised by disaster activity, could be affected.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMixing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePercide itself requires no dilution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix 9 parts Percide and 1 part Percide Boost\u003c\/strong\u003e for enhanced cleaning action. \u003cstrong\u003eUse within 6 hours.\u003c\/strong\u003e This 500 ml pack treats 4.5 litres of Percide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever apply Percide Boost neat to a surface.\u003c\/strong\u003e It is not a cleaning product on its own and at pH 10.4 to 10.6 with potassium hydroxide it will damage substrates that the mixed solution will not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove and clean away all wet and dry debris.\u003c\/li\u003e\n\u003cli\u003eApply the Percide solution to the affected area.\u003c\/li\u003e\n\u003cli\u003eEnsure all surfaces come into contact with the solution. Apply by spray, wet fog, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate briefly where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum of 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat for heavy mould conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e for heavy mould situations, mix Percide with Percide Boost for accelerated eradication and cleaning performance, and agitate thoroughly. After cleaning and disinfection is complete, Percide can be applied as a post-residual treatment for enhanced inhibition of fresh mould growth.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page carried no hazard information at all, and described the chemistry as low-toxicity and easy to use. That description belongs to Percide. It does not describe Percide Boost.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePercide Boost is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Serious Eye Damage Category 1; Skin Corrosion\/Irritation Category 1B\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e10.4 to 10.6\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: potassium hydroxide, glycolic acid, sodium carbonate, EDTA tetrasodium salt, potassium pyrophosphate, a quaternary ammonium compound and a proprietary surfactant — each below 10%\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN1760, Class 8, Packing Group II\u003c\/strong\u003e, proper shipping name “CORROSIVE LIQUID, N.O.S. (contains potassium hydroxide)”\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePercide and Percide Boost are not the same hazard\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide Boost\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statement\u003c\/td\u003e\n\u003ctd\u003eH319 — serious eye irritation\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314 — severe skin burns and eye damage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUN1760, Class 8, PG II\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e6.2\u003c\/td\u003e\n\u003ctd\u003e10.4 – 10.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide, under 8%\u003c\/td\u003e\n\u003ctd\u003ePotassium hydroxide and glycolic acid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e2P\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe mixed 9:1 working solution is dominated by the Percide, and it is the mild thing. \u003cstrong\u003eThe concentrate in this container is not.\u003c\/strong\u003e Every splash risk with this product happens at the moment you decant and mix it — that is when the goggles matter. A 500 ml bottle poured into an open pail of Percide is exactly that moment.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies elbow-length PVC gloves, chemical goggles, overalls and a PVC apron, with access to an eyewash unit.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay — H314 means eye damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and footwear immediately and flush with large amounts of water. Alkaline burns are often painless at first and deepen over minutes.\u003c\/p\u003e\n\u003ch2\u003eMixing and Compatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAvoid contact with acids and oxidising agents.\u003c\/strong\u003e Percide Boost is alkaline; mixing it with a strong acid releases heat quickly enough to boil and spit corrosive liquid.\u003c\/p\u003e\n\u003cp\u003eNever mix, and never allow contact in a bucket, sprayer, fogger tank, drain or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or any acid rinse or descaler\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e, pool chlorine or any hypochlorite\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eOxyboost Plus\u003c\/a\u003e or any other oxidiser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe only thing Percide Boost should ever be mixed with is Percide, at 1:9.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP611.005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e500 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRole\u003c\/td\u003e\n\u003ctd\u003eActivator for Percide — not a stand-alone product\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio\u003c\/td\u003e\n\u003ctd\u003e1 part Boost to 9 parts Percide — this pack treats 4.5 litres of Percide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolution life\u003c\/td\u003e\n\u003ctd\u003eUse the mixed solution within 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e1 minute disinfection; 10 minutes mould remediation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.4 to 10.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN1760, Class 8, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids and oxidising agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.2, issued 9 October 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-boost-5ltr\"\u003eActichem Percide Boost 5 Ltr\u003c\/a\u003e — the production pack, matched to a 20 litre Percide and up\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide 5 Ltr\u003c\/a\u003e — the product this boosts, and the natural pairing for this pack size. WARNING rather than DANGER, and not dangerous goods.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-20ltr\"\u003eActichem Percide 20 Ltr\u003c\/a\u003e — the production pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a non-classified peroxide alternative where no boosting is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Percide-Boost-AP611.pdf\"\u003eActichem Percide Boost Safety Data Sheet — version 2.2, issued 9 October 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRead the Percide SDS as well. The working solution is governed by both.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorking a mould job and not sure whether you need the Boost at all? Percide on its own handles most remediation work; the Boost is for heavy growth and tight timeframes. Contact Carpet Cleaners Warehouse — if you do not need a Class 8 corrosive on the van, we will tell you so.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"500ML","offer_id":20932277829691,"sku":"AP611.005","price":20.24,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Percide-Boost-500ml.jpg?v=1780550931"},{"product_id":"actichem-percide-boost-5ltr","title":"Actichem Percide Boost 5ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s Percide Boost accelerates the micro-organism killing power and destaining ability of \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003ePercide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePercide Boost is an activator, not a stand-alone product.\u003c\/strong\u003e It is added to Percide at 1 part Boost to 9 parts Percide. With that easy 1:9 mixing ratio it is convenient in use and produces dramatic results — everything the original Percide offers, but faster, and on heavy-duty work with less effort.\u003c\/p\u003e\n\u003cp\u003eTake mould eradication as a case in point: the 1:9 Percide Boost and Percide mix destroys mould in five minutes. Percide’s peroxide formula has a lethal effect on mould spores, and when mixed with Percide Boost the hydroxyl reaction on mould growth is dramatically accelerated. That reduces the time required to eliminate spores and to lift and remove discolouration and soiling.\u003c\/p\u003e\n\u003cp\u003eActichem report that the Percide and Percide Boost mix takes only 5 minutes to achieve a greater than 4.5 log reduction when tested against \u003cem\u003eAspergillus brasiliensis\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety section before you open this container.\u003c\/strong\u003e Percide on its own is a mild product — signal word WARNING, not classified as dangerous goods. \u003cstrong\u003ePercide Boost is not.\u003c\/strong\u003e It is a corrosive Class 8 dangerous good. The two are sold together and used together, and their pages have not made that difference clear until now.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced peroxide formula\u003c\/strong\u003e — Percide comprises a unique peroxide formula for disinfection and mould eradication performance in an easy-to-use form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — the anti-microbial package is combined with super-wetting technology, enabling the biocide to penetrate faster and deeper into the inner structure of fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning and destaining\u003c\/strong\u003e — lifts mould from surface pores and provides cleaning and destaining action on mould and bacterial discolouration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates odours\u003c\/strong\u003e — at their source, by anti-microbial action against odour-causing germs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInherently biodegradable\u003c\/strong\u003e — an environmentally responsible choice at working dilution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eObserve all safety directions and read the SDS before use.\u003c\/li\u003e\n\u003cli\u003ePercide is suitable on most carpets and fabrics; some delicate fibres, and fibres destabilised by disaster activity, could be affected.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMixing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePercide itself requires no dilution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix 9 parts Percide and 1 part Percide Boost\u003c\/strong\u003e for enhanced cleaning action. \u003cstrong\u003eUse within 6 hours.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever apply Percide Boost neat to a surface.\u003c\/strong\u003e It is not a cleaning product on its own and at pH 10.4 to 10.6 with potassium hydroxide it will damage substrates that the mixed solution will not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove and clean away all wet and dry debris.\u003c\/li\u003e\n\u003cli\u003eApply the Percide solution to the affected area.\u003c\/li\u003e\n\u003cli\u003eEnsure all surfaces come into contact with the solution. Apply by spray, wet fog, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate briefly where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum of 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat for heavy mould conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e for heavy mould situations, mix Percide with Percide Boost for accelerated eradication and cleaning performance, and agitate thoroughly. After cleaning and disinfection is complete, Percide can be applied as a post-residual treatment for enhanced inhibition of fresh mould growth.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page carried no hazard information at all, and described the chemistry as low-toxicity and easy to use. That description belongs to Percide. It does not describe Percide Boost.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePercide Boost is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Serious Eye Damage Category 1; Skin Corrosion\/Irritation Category 1B\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e10.4 to 10.6\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: potassium hydroxide, glycolic acid, sodium carbonate, EDTA tetrasodium salt, potassium pyrophosphate, a quaternary ammonium compound and a proprietary surfactant — each below 10%\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN1760, Class 8, Packing Group II\u003c\/strong\u003e, proper shipping name “CORROSIVE LIQUID, N.O.S. (contains potassium hydroxide)”\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePercide and Percide Boost are not the same hazard\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide Boost\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statement\u003c\/td\u003e\n\u003ctd\u003eH319 — serious eye irritation\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314 — severe skin burns and eye damage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUN1760, Class 8, PG II\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e6.2\u003c\/td\u003e\n\u003ctd\u003e10.4 – 10.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide, under 8%\u003c\/td\u003e\n\u003ctd\u003ePotassium hydroxide and glycolic acid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e2P\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe mixed 9:1 working solution is dominated by the Percide, and it is the mild thing. \u003cstrong\u003eThe concentrate in this container is not.\u003c\/strong\u003e Every splash risk with this product happens at the moment you decant and mix it — that is when the goggles matter.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies elbow-length PVC gloves, chemical goggles, overalls and a PVC apron, with access to an eyewash unit.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay — H314 means eye damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and footwear immediately and flush with large amounts of water. Alkaline burns are often painless at first and deepen over minutes.\u003c\/p\u003e\n\u003ch2\u003eMixing and Compatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAvoid contact with acids and oxidising agents.\u003c\/strong\u003e Percide Boost is alkaline; mixing it with a strong acid releases heat quickly enough to boil and spit corrosive liquid.\u003c\/p\u003e\n\u003cp\u003eNever mix, and never allow contact in a bucket, sprayer, fogger tank, drain or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or any acid rinse or descaler\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e, pool chlorine or any hypochlorite\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eOxyboost Plus\u003c\/a\u003e or any other oxidiser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe only thing Percide Boost should ever be mixed with is Percide, at 1:9.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP611.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRole\u003c\/td\u003e\n\u003ctd\u003eActivator for Percide — not a stand-alone product\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio\u003c\/td\u003e\n\u003ctd\u003e1 part Boost to 9 parts Percide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolution life\u003c\/td\u003e\n\u003ctd\u003eUse the mixed solution within 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e1 minute disinfection; 10 minutes mould remediation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e10.4 to 10.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN1760, Class 8, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids and oxidising agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.2, issued 9 October 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-boost-500ml\"\u003eActichem Percide Boost 500 ml\u003c\/a\u003e — the same product in the smaller pack, matched to a 5 litre Percide\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide 5 Ltr\u003c\/a\u003e — the product this boosts. WARNING rather than DANGER, and not dangerous goods.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-20ltr\"\u003eActichem Percide 20 Ltr\u003c\/a\u003e — the production pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a non-classified peroxide alternative where no boosting is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Percide-Boost-AP611.pdf\"\u003eActichem Percide Boost Safety Data Sheet — version 2.2, issued 9 October 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRead the Percide SDS as well. The working solution is governed by both.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorking a mould job and not sure whether you need the Boost at all? Percide on its own handles most remediation work; the Boost is for heavy growth and tight timeframes. Contact Carpet Cleaners Warehouse — if you do not need a Class 8 corrosive on the van, we will tell you so.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":31095090053179,"sku":"AP611.05","price":68.86,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Percide-Boost-5ltr.jpg?v=1780550945"},{"product_id":"actichem-fire-restore-20l","title":"Actichem Fire Restore 20ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Fire Restore cuts through the tough oily soils created by fire activity and the resulting smoke and soot.\u003c\/p\u003e\n\u003cp\u003eWhere a fire has consumed synthetic materials — paint, plastics, rubber — the soot deposits contain significant amounts of \u003cstrong\u003eoils and resins\u003c\/strong\u003e, and those penetrate deep into porous surfaces. That is why soot on masonry does not respond to ordinary detergents: you are not cleaning off dust, you are cleaning out an oily resin that has soaked in. Fire Restore is formulated to penetrate resilient porous surfaces and release those deposits.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e20 litre\u003c\/strong\u003e bulk pack — the usual choice for restoration contractors, because structural fire work covers large areas quickly. At 1:10 it makes 200 litres of working solution. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003e5 litre\u003c\/a\u003e suits a single moderate job.\u003c\/p\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eresilient surfaces\u003c\/strong\u003e including tiles, concrete, masonry, terracotta, natural stone and unsealed lino.\u003c\/p\u003e\n\u003cp\u003eMost painted concrete floors, powder-coated metals, zincalume, construction timber and structural steel can also be cleaned with Fire Restore, \u003cstrong\u003ebut pre-test for substrate chemical sensitivity first.\u003c\/strong\u003e If you strike a sensitive substrate, try a weaker dilution or switch to \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for area\u003c\/strong\u003e — designed for fast removal of soot from resilient surfaces where the areas to be cleaned are large. On a structural fire job the economics are driven by square metres, not by bottles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetrating chemistry\u003c\/strong\u003e — releases ingrained soils and micro-size smoke particles from porous and semi-porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e — also effective on general grime and oils on tiles, masonry and concrete outside restoration work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour control\u003c\/strong\u003e — this is the part people underestimate. \u003cstrong\u003eSoot removal is odour removal.\u003c\/strong\u003e You cannot deodorise a surface that is still holding oily smoke residue; sealing or fogging over it buys weeks, not years. Effective removal of the soiling is an integral part of eliminating the associated odour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal to moderate soil\u003c\/strong\u003e — 50–100 ml per litre of water (1:20 to 1:10).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy soil\u003c\/strong\u003e — up to 200 ml per litre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitive surfaces\u003c\/strong\u003e — always pre-test, and consider a weaker dilution or Fire Fix instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover areas not being cleaned.\u003c\/strong\u003e On a fire job that means most of the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly apply solution to an area you can clean and rinse within 30 to 40 minutes.\u003c\/strong\u003e Working in sections is not a suggestion — see the note below.\u003c\/li\u003e\n\u003cli\u003eApply with a sprayer, sponge or scrubber machine. \u003cstrong\u003eDo not allow the solution to dry onto the surface.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAgitate and allow \u003cstrong\u003e10 to 15 minutes dwell.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRe-agitate areas of heavy soiling.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water. A high-pressure washing system gives the best result.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e⚠ Why the 30 to 40 minute working area matters\u003c\/h3\u003e\n\u003cp\u003eFire Restore is \u003cstrong\u003epH 12.8\u003c\/strong\u003e. If it dries on the surface you have a concentrated caustic residue sitting on the substrate with nothing left to carry it away — which is how etching, staining and coating damage happen, and how a job that was going well turns into a repair. It also makes the residue far harder to rinse.\u003c\/p\u003e\n\u003cp\u003eWork in sections you can finish. On a hot day or in a building with air movers running, make the sections smaller, not larger.\u003c\/p\u003e\n\u003ch3\u003eAdding Oxyboost Plus — odour control and stain removal\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eOxyboost Plus\u003c\/a\u003e is a concentrated oxygen oxidising powder. Added to diluted Fire Restore it oxidises malodour molecules and lifts stubborn stains.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix the Fire Restore solution using \u003cstrong\u003ewarm water, 40–60 °C.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd \u003cstrong\u003e10–20 grams of Oxyboost Plus per litre\u003c\/strong\u003e of ready-to-use Fire Restore solution. Stir well to dissolve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the solution within 30 minutes.\u003c\/strong\u003e Oxygen chemistry starts working the moment it dissolves — a bucket mixed an hour ago is largely spent, and you are then cleaning with plain Fire Restore while paying for Oxyboost.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003ePlease read this section before your next job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously stated that Fire Restore “is not classified as dangerous goods” and that this makes it “substantially safer in use and in transport”. The second half of that was wrong and we have removed it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDangerous goods classification is a \u003cstrong\u003etransport\u003c\/strong\u003e classification. It describes the risk of carrying a substance in a vehicle. \u003cstrong\u003eIt says nothing about how safe a product is to use\u003c\/strong\u003e, and Fire Restore is a clear example of why the two should never be conflated: it is not regulated for transport, and it is also \u003cstrong\u003ethe most severely classified product in our fire restoration range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for DR164, version 5.1 issued 24 May 2021, classifies Fire Restore as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes \u003cstrong\u003esevere skin burns and eye damage\u003c\/strong\u003e (Skin Corrosion Category 1B, Serious Eye Damage Category 1)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHAZCHEM \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H314 — severe skin burns and eye damage\u003c\/h3\u003e\n\u003cp\u003eH314 is a \u003cstrong\u003ecorrosive\u003c\/strong\u003e classification. It is a step above the H315 skin irritation and H318 eye damage carried by Fire Fix: this product will burn skin, not merely irritate it.\u003c\/p\u003e\n\u003cp\u003eThe concentrate is \u003cstrong\u003epH 12.8.\u003c\/strong\u003e Two things about alkaline burns that catch people out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey do not hurt straight away.\u003c\/strong\u003e Acid burns announce themselves; alkali burns are often painless at first, so the natural reaction is to finish what you are doing and wash it off later. By then the damage is done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey keep going.\u003c\/strong\u003e Alkalis saponify skin and continue penetrating until they are physically removed. That is why the first aid below says flush \u003cem\u003econtinuously\u003c\/em\u003e, and why a quick rinse is not enough.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles and full protective clothing\u003c\/strong\u003e whenever the concentrate is handled, and whenever solution is applied overhead or by pressure washer. An eyewash unit should be on site. If concentrate contacts skin, \u003cstrong\u003eflush the body and clothing with large amounts of water immediately\u003c\/strong\u003e and keep flushing.\u003c\/p\u003e\n\u003ch3\u003e⚠ Poisons Schedule 6\u003c\/h3\u003e\n\u003cp\u003eSchedule 6 brings labelling and storage obligations. Keep it in its original labelled container, store it securely away from food and out of reach of children, and do not decant it into anything unlabelled.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAvoid acids and oxidising agents.\u003c\/strong\u003e Do not mix Fire Restore with acidic cleaners, and do not add chlorine or hypochlorite products to it. The one addition Actichem sanctions is Oxyboost Plus at the rate given above.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Immediately hold the eyelids apart and flush the eye \u003cstrong\u003econtinuously\u003c\/strong\u003e with running water. Seek medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately flush the body and clothing with \u003cstrong\u003elarge amounts of water\u003c\/strong\u003e. Remove contaminated clothing while flushing. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Remove to fresh air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Immediately give a glass of water. Seek medical attention without delay.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eDR164.20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHighly alkaline soot and smoke residue cleaner for resilient surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear blue liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild pine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:20 to 1:10; up to 200 ml\/L for heavy soil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.8\u003c\/strong\u003e as supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003ePotassium pyrophosphate (CAS 7320-34-5); EDTA tetrasodium salt (CAS 64-02-8); monoethanolamine (CAS 141-43-5); ethylene glycol monobutyl ether (CAS 111-76-2); nonylphenol ethoxylate (CAS 9016-45-9). All under 10%.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids and oxidising agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — severe skin burns and eye damage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eActichem states not regulated for transport. \u003cstrong\u003eThis is a transport classification only and does not indicate the product is mild in use.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 5.1, issued 24 May 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFire Restore or Fire Fix?\u003c\/h2\u003e\n\u003cp\u003eBoth are Actichem restoration cleaners. They are not interchangeable, and the difference is significant.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFire Fix\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eFire Restore\u003c\/strong\u003e (this product)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e12.8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314 — corrosive\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e6\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest on\u003c\/td\u003e\n\u003ctd\u003eCarpets, fabrics, general surfaces, safety flooring\u003c\/td\u003e\n\u003ctd\u003eResilient surfaces — masonry, concrete, tile, stone — over large areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReach for \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eFire Fix\u003c\/a\u003e first.\u003c\/strong\u003e Where it will do the job it is the lower-hazard product by a clear margin, and it is the one suited to carpets and fabrics. Fire Restore is the right tool when you are working oily soot out of masonry, concrete and stone over large areas — not the default for every fire job.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eActichem Fire Restore 5 litre\u003c\/a\u003e — the same product in the smaller pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — the lower-hazard restoration cleaner. Read the comparison above.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-oxyboost-plus-4-5-kg\"\u003eActichem Oxyboost Plus\u003c\/a\u003e — oxygen booster for odour control and stain removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202105-Actichem-Fire-Restore-DR164.pdf\"\u003eActichem Fire Restore safety data sheet (DR164, version 5.1, 24 May 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: DR164.20\u003c\/p\u003e\n\u003cp\u003eDG shipping surcharge applies.\u003c\/p\u003e\n\u003cp\u003eScoping a fire job and unsure which product suits the surfaces involved? Tell us what you are dealing with. Choosing correctly saves chemical cost and avoids damaging a substrate you then have to make good.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"20L","offer_id":35516194160793,"sku":"DR164.20","price":279.29,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Fire-Restore-20ltr.jpg?v=1780550966"},{"product_id":"actichem-mould-exterminator-5l","title":"Actichem Mould Exterminator 5L","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eMould Exterminator’s unique, super-wetting formula provides consistent, reliable results in mould remediation every time. Its powerful stain removal can be seen almost instantly when applied to mould-affected surfaces. Mould Exterminator penetrates deep into the affected surface and completely destroys the mould hyphae and root system.\u003c\/p\u003e\n\u003cp\u003eTo be clear about what that does and does not promise: clearance on a remediation job depends on the whole process — containment, source removal, physical removal of contaminated material, drying, and independent verification. No single product delivers a clearance result. Mould Exterminator is one step in that process.\u003c\/p\u003e\n\u003cp\u003eMould Exterminator is ready to use. No mixing is required. It is the pre-blended version of the chemistry produced by adding \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer\u003c\/a\u003e to pool chlorine, supplied at working strength so that you do not have to handle 12.5% sodium hypochlorite yourself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to use does not mean low hazard.\u003c\/strong\u003e Mould Exterminator is a hypochlorite bleach classified as corrosive dangerous goods. Read the Safety section below before you open the container.\u003c\/p\u003e\n\u003ch2\u003eDirections for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove and clean away all wet and dry debris.\u003c\/li\u003e\n\u003cli\u003eApply Mould Exterminator to the affected area. Do not dilute.\u003c\/li\u003e\n\u003cli\u003eEnsure all surfaces come into contact with the product. Apply by spray, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate areas with heavy organic or mould build-up.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWhere spray application is used, ventilate the area and use respiratory protection. Spraying a corrosive hypochlorite solution generates mist, and H335 applies.\u003c\/p\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eIdeal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways. Suitable for natural stone, ceramic and porcelain, concrete and masonry, and timber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use or allow contact on carpets, fabrics or sensitive surfaces.\u003c\/strong\u003e This is Actichem’s own restriction and it matters here, because Mould Exterminator sits alongside carpet and upholstery chemistry in our range. It is a hypochlorite bleach and will strip dye and damage fibres. For mould odour and staining on textiles, ask us for a textile-appropriate product instead.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisinfects\u003c\/strong\u003e bio-contaminated surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKills\u003c\/strong\u003e mould (including roots and hyphae) and removes the staining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — to provide complete mould removal of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the Hypochlorous Acid to penetrate faster and deeper into the inner structure of fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning\u003c\/strong\u003e — Mould Exterminator also provides outstanding cleaning power to remove the accompanying organic grime.\u003c\/li\u003e\n\u003cli\u003eAlmost instant stain removal with no scrubbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page described Mould Exterminator as a safe product and carried no hazard information. That was wrong, and we have corrected it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMould Exterminator is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH335\u003c\/strong\u003e — may cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH290\u003c\/strong\u003e — may be corrosive to metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUH031\u003c\/strong\u003e — contact with acid liberates toxic gas\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; STOT Single Exposure (Respiratory) Category 3\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e11.9\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActive: sodium hypochlorite, less than 10%, with sodium lauryl ether sulphate and a proprietary surfactant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePersonal protective equipment.\u003c\/strong\u003e Elbow-length PVC gloves; chemical goggles wherever there is any chance of eye contact; overalls and a PVC apron. A PVC protective suit may be required where exposure is severe. Access to an eye wash unit and a safety shower is specified by the SDS. H314 means this product causes irreversible eye damage and burns skin — the goggles and gloves are not a formality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — eyes.\u003c\/strong\u003e Immediately hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — skin.\u003c\/strong\u003e Remove contaminated clothing immediately. Flush skin and hair with running water and soap. Seek medical attention if irritation occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — inhalation.\u003c\/strong\u003e Remove the person from the contaminated area to fresh air and keep them at rest. If breathing is difficult, transport to hospital without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — ingestion.\u003c\/strong\u003e Do NOT induce vomiting. Rinse the mouth with water, give small amounts of liquid, and seek medical advice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage.\u003c\/strong\u003e Store in a cool, dry, well-ventilated area. \u003cstrong\u003eDo not store near acids or oxidising agents.\u003c\/strong\u003e The product may be corrosive to metals — do not decant into or store in unlined metal containers.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMould Exterminator liberates chlorine gas on contact with acid (AUH031).\u003c\/strong\u003e Chlorine gas causes severe respiratory injury and can be fatal in a confined space such as a bathroom, shower recess, sub-floor or plant room — exactly the places this product is used.\u003c\/p\u003e\n\u003cp\u003eNever mix Mould Exterminator with, and never allow it to pool into, run into or share equipment with, any of the following acid products we also supply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eActichem Rust Remover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eActichem Crete Clean\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e and the other tile and grout restorers\u003c\/li\u003e\n\u003cli\u003eAny acid rinse, descaler, toilet bowl cleaner or efflorescence remover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso never mix with ammonia or ammoniated cleaners\u003c\/strong\u003e, which form \u003cstrong\u003echloramine gas\u003c\/strong\u003e with hypochlorite — a gas that causes severe respiratory injury and can be fatal in a confined space such as a bathroom, sub-floor or roof cavity. \u003cstrong\u003eIn our own range that means \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-bust-5-ltr\"\u003eActichem Bust\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-protein-spotter-5l\"\u003eActichem Protein Spotter\u003c\/a\u003e\u003c\/strong\u003e, both alkaline ammoniated spotters commonly carried in the same kit as a chlorine product. It also includes household ammonia and many glass and multi-purpose cleaners. \u003cstrong\u003eNever spray one onto a surface still wet with the other.\u003c\/strong\u003e If an acid step and a chlorine step are both required on the same job, rinse thoroughly with clean water between them and use separate, clearly labelled equipment.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP726.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use — do not dilute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear yellow liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eChlorine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003eMiscible in water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e11.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eSodium hypochlorite, less than 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e1 minute disinfection; 10 minutes mould remediation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314, H335, H290, AUH031\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods. The SDS states the product is not regulated for transport in packs of 5 litres or less, so this 5 litre pack falls within that exemption.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarine pollutant\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.3, issued 25 December 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-20l\"\u003eActichem Mould Exterminator 20L\u003c\/a\u003e — the same product in the bulk pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer\u003c\/a\u003e — the additive version, for blending into your own pool chlorine at a lower cost per litre of working solution\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a chlorine-free, peroxide-based alternative. Its SDS classifies it as a non-hazardous chemical and non-dangerous goods, which makes it the better choice in occupied buildings, near textiles, or wherever bleach is unsuitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInformation Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/617_Mould_Exterminator_Actichem.pdf\"\u003eProduct Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/AP726.05-Mould-Exterminator-25122025.pdf\"\u003eSafety Data Sheet — version 1.3, issued 25 December 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eWorking in an occupied building, or near carpet, fabric or finished timber? Talk to Carpet Cleaners Warehouse before you order. A chlorine-free product is often the right call, and we would rather help you choose correctly than sell you the wrong chemistry.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":43384921882837,"sku":"AP726.05","price":60.67,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Mould-Exterminator-5L.jpg?v=1780551431"},{"product_id":"actichem-mould-exterminator-20l","title":"Actichem Mould Exterminator 20L","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eMould Exterminator’s unique, super-wetting formula provides consistent, reliable results in mould remediation every time. Its powerful stain removal can be seen almost instantly when applied to mould-affected surfaces. Mould Exterminator penetrates deep into the affected surface and completely destroys the mould hyphae and root system.\u003c\/p\u003e\n\u003cp\u003eTo be clear about what that does and does not promise: clearance on a remediation job depends on the whole process — containment, source removal, physical removal of contaminated material, drying, and independent verification. No single product delivers a clearance result. Mould Exterminator is one step in that process.\u003c\/p\u003e\n\u003cp\u003eMould Exterminator is ready to use. No mixing is required. It is the pre-blended version of the chemistry produced by adding \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer\u003c\/a\u003e to pool chlorine, supplied at working strength so that you do not have to handle 12.5% sodium hypochlorite yourself. This 20 litre drum is the production pack for remediation contractors running the product daily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to use does not mean low hazard.\u003c\/strong\u003e Mould Exterminator is a hypochlorite bleach classified as corrosive dangerous goods, and at 20 litres it is above the transport exemption. Read the Safety section below before you open the drum.\u003c\/p\u003e\n\u003ch2\u003eDirections for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove and clean away all wet and dry debris.\u003c\/li\u003e\n\u003cli\u003eApply Mould Exterminator to the affected area. Do not dilute.\u003c\/li\u003e\n\u003cli\u003eEnsure all surfaces come into contact with the product. Apply by spray, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate areas with heavy organic or mould build-up.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWhere spray application is used, ventilate the area and use respiratory protection. Spraying a corrosive hypochlorite solution generates mist, and H335 applies.\u003c\/p\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eIdeal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways. Suitable for natural stone, ceramic and porcelain, concrete and masonry, and timber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use or allow contact on carpets, fabrics or sensitive surfaces.\u003c\/strong\u003e This is Actichem’s own restriction and it matters here, because Mould Exterminator sits alongside carpet and upholstery chemistry in our range. It is a hypochlorite bleach and will strip dye and damage fibres. For mould odour and staining on textiles, ask us for a textile-appropriate product instead.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisinfects\u003c\/strong\u003e bio-contaminated surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKills\u003c\/strong\u003e mould (including roots and hyphae) and removes the staining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — to provide complete mould removal of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the Hypochlorous Acid to penetrate faster and deeper into the inner structure of fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning\u003c\/strong\u003e — Mould Exterminator also provides outstanding cleaning power to remove the accompanying organic grime.\u003c\/li\u003e\n\u003cli\u003eAlmost instant stain removal with no scrubbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page described Mould Exterminator as a safe product and carried no hazard information. That was wrong, and we have corrected it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMould Exterminator is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH335\u003c\/strong\u003e — may cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH290\u003c\/strong\u003e — may be corrosive to metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUH031\u003c\/strong\u003e — contact with acid liberates toxic gas\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; STOT Single Exposure (Respiratory) Category 3\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e11.9\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActive: sodium hypochlorite, less than 10%, with sodium lauryl ether sulphate and a proprietary surfactant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis 20 litre pack is above the transport exemption.\u003c\/strong\u003e The SDS states that Mould Exterminator is not regulated for the transport of dangerous goods in packs of 5 litres or less. A 20 litre drum is above that threshold and is handled as regulated dangerous goods. Allow for this in freight, and store it accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePersonal protective equipment.\u003c\/strong\u003e Elbow-length PVC gloves; chemical goggles wherever there is any chance of eye contact; overalls and a PVC apron. A PVC protective suit may be required where exposure is severe. Access to an eye wash unit and a safety shower is specified by the SDS. Decanting from a 20 litre drum is the highest-splash operation with this product — goggles and apron matter most at that moment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — eyes.\u003c\/strong\u003e Immediately hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — skin.\u003c\/strong\u003e Remove contaminated clothing immediately. Flush skin and hair with running water and soap. Seek medical attention if irritation occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — inhalation.\u003c\/strong\u003e Remove the person from the contaminated area to fresh air and keep them at rest. If breathing is difficult, transport to hospital without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — ingestion.\u003c\/strong\u003e Do NOT induce vomiting. Rinse the mouth with water, give small amounts of liquid, and seek medical advice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage.\u003c\/strong\u003e Store in a cool, dry, well-ventilated area. \u003cstrong\u003eDo not store near acids or oxidising agents.\u003c\/strong\u003e The product may be corrosive to metals — do not decant into or store in unlined metal containers.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMould Exterminator liberates chlorine gas on contact with acid (AUH031).\u003c\/strong\u003e Chlorine gas causes severe respiratory injury and can be fatal in a confined space such as a bathroom, shower recess, sub-floor or plant room — exactly the places this product is used.\u003c\/p\u003e\n\u003cp\u003eNever mix Mould Exterminator with, and never allow it to pool into, run into or share equipment with, any of the following acid products we also supply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eActichem Rust Remover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eActichem Crete Clean\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e and the other tile and grout restorers\u003c\/li\u003e\n\u003cli\u003eAny acid rinse, descaler, toilet bowl cleaner or efflorescence remover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso never mix with ammonia or ammoniated cleaners\u003c\/strong\u003e, which form \u003cstrong\u003echloramine gas\u003c\/strong\u003e with hypochlorite — a gas that causes severe respiratory injury and can be fatal in a confined space such as a bathroom, sub-floor or roof cavity. \u003cstrong\u003eIn our own range that means \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-bust-5-ltr\"\u003eActichem Bust\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-protein-spotter-5l\"\u003eActichem Protein Spotter\u003c\/a\u003e\u003c\/strong\u003e, both alkaline ammoniated spotters commonly carried in the same kit as a chlorine product. It also includes household ammonia and many glass and multi-purpose cleaners. \u003cstrong\u003eNever spray one onto a surface still wet with the other.\u003c\/strong\u003e If an acid step and a chlorine step are both required on the same job, rinse thoroughly with clean water between them and use separate, clearly labelled equipment.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use — do not dilute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear yellow liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eChlorine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003eMiscible in water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e11.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eSodium hypochlorite, less than 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e1 minute disinfection; 10 minutes mould remediation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314, H335, H290, AUH031\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods. The SDS exemption applies only to packs of 5 litres or less, so this 20 litre pack is regulated.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarine pollutant\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.3, issued 25 December 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator 5L\u003c\/a\u003e — the same product in a pack that falls within the transport exemption\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer\u003c\/a\u003e — the additive version, for blending into your own pool chlorine at a lower cost per litre of working solution\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a chlorine-free, peroxide-based alternative. Its SDS classifies it as a non-hazardous chemical and non-dangerous goods, which makes it the better choice in occupied buildings, near textiles, or wherever bleach is unsuitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInformation Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/617_Mould_Exterminator_Actichem.pdf\"\u003eProduct Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/AP726.05-Mould-Exterminator-25122025.pdf\"\u003eSafety Data Sheet — version 1.3, issued 25 December 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eWorking in an occupied building, or near carpet, fabric or finished timber? Talk to Carpet Cleaners Warehouse before you order. A chlorine-free product is often the right call, and we would rather help you choose correctly than sell you the wrong chemistry.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"20LTR","offer_id":43384921948373,"sku":"AP726.20","price":197.51,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Mould-Exterminator-20L.jpg?v=1780551431"},{"product_id":"actichem-grout-restore-60-5ltr","title":"Actichem Grout Restore 60 5ltr","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePhosphoric acid cleaner for hard surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGrout Restore 60 is a detergent-boosted solution containing \u003cstrong\u003e60% active phosphoric acid\u003c\/strong\u003e for the effective and economical removal of cement and grout residues, mineral scale build-ups, and efflorescence. Its powerful blend of acid and penetrating agents provides tough action on general grime and is excellent for grout restoration.\u003c\/p\u003e\n\u003cp\u003eIt is the strongest of the three Actichem acid restorers and the correct choice when Tile \u0026amp; Grout Restore or Grout Restore 20 have not shifted the deposit. It is also the most hazardous — see Safety below.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves grout smear and cement residues efficiently.\u003c\/li\u003e\n\u003cli\u003eTackles rust, efflorescence and years of scale build-up.\u003c\/li\u003e\n\u003cli\u003eDoubles as a maintenance cleaner or a neutraliser following strongly alkaline cleaning.\u003c\/li\u003e\n\u003cli\u003eCompatible with professional hard surface equipment — rotary scrubbers, auto-scrubbers and pressure washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable for ceramic, porcelain and other man-made tiles, and masonry surfaces. Use with care on sandstone, quarry tiles, terracotta, grout and slate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for acid-sensitive surfaces, including engineered stone, terrazzo, marble, limestone, granite and other natural stone. Avoid contact with all ferrous and non-ferrous metals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity before starting.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMineral scale build-up, efflorescence, cement residues and heavy-duty applications — \u003cstrong\u003e1:4 to 1:8\u003c\/strong\u003e (200 to 110 ml per litre)\u003c\/li\u003e\n\u003cli\u003eGrout residues and light-duty applications — \u003cstrong\u003e1:30 to 1:40\u003c\/strong\u003e (30 to 20 ml per litre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication — heavy duty\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply with a mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow the solution to dry.\u003c\/li\u003e\n\u003cli\u003eScrub thoroughly with an applicable nylon scouring\/floor pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 30 minutes reaction time, then re-agitate.\u003c\/li\u003e\n\u003cli\u003eExtract or pick up the resultant slurry with extraction equipment.\u003c\/li\u003e\n\u003cli\u003eNeutralise remaining residues by rinsing thoroughly with a 1:300 solution (30 ml per 10 litres) of Actichem Tile \u0026amp; Grout Cleaner or Proneutro.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eApplication — light duty\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the diluted solution and scrub thoroughly with the applicable pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 30 minutes reaction time and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse well with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGrout Restore 60 is the most hazardous of Actichem’s three acid restorers. Read this section before you open the container, even if you use the other two regularly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur page previously recorded only “Safety profile: Class 8 Corrosive”. That is a transport classification, and it is not wrong — but a transport class tells you nothing about PPE, first aid or what the product reacts with. The full classification is below.\u003c\/p\u003e\n\u003cp\u003eGrout Restore 60 is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2R\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003eless than 1\u003c\/strong\u003e (the SDS value; our page and Actichem’s both previously stated 1 to 1.5)\u003c\/li\u003e\n\u003cli\u003eActive: \u003cstrong\u003ephosphoric acid, 60% w\/w\u003c\/strong\u003e, with a proprietary surfactant at less than 10%\u003c\/li\u003e\n\u003cli\u003ePoisons schedule: Schedule 6 under the WHS classification; listed as Schedule 5 under the SUSMP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a genuine step up from Grout Restore 20.\u003c\/strong\u003e Grout Restore 20 is 20% phosphoric acid, signal word WARNING, and classified as an irritant. Grout Restore 60 is 60% phosphoric acid, signal word DANGER, and classified \u003cem\u003ecorrosive\u003c\/em\u003e — it causes irreversible eye damage and burns skin. Do not carry over the handling habits you use for the 20.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles and a full face shield\u003c\/strong\u003e, neoprene or butyl gloves, safety footwear, overalls and a PVC apron, with access to an eye wash unit and a safety shower. The face shield is specified in addition to goggles, not instead of them. Splash risk is highest when decanting and when pressure washing.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay — H314 means eye damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and footwear immediately. Flush the affected area with running water. Seek medical attention.\u003c\/p\u003e\n\u003ch2\u003eMetals, Mixing and Reactivity\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMetals.\u003c\/strong\u003e The SDS states that Grout Restore 60 is \u003cstrong\u003ecorrosive to aluminium, tin and zinc\u003c\/strong\u003e. Avoid contact with all ferrous and non-ferrous metals. Do not decant into or store in aluminium, galvanised, tin-plated or unlined metal containers. Acid attack on these metals also produces hydrogen, which is flammable, so ventilate confined areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlkali contact liberates heat.\u003c\/strong\u003e The SDS notes that contact with alkali generates heat. The 1:300 neutralising rinse specified in the method is safe because it is dilute. Never pour concentrated alkaline product onto spilled or undiluted Grout Restore 60 to neutralise it — dilute with plenty of water first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNever mix with chlorine.\u003c\/strong\u003e Mixing any acid with hypochlorite liberates chlorine gas, which causes severe respiratory injury and can be fatal in a confined space such as a shower recess, plant room or pool enclosure. Never mix, and never allow contact in a bucket, drain, extraction tank or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer\u003c\/a\u003e working solutions\u003c\/li\u003e\n\u003cli\u003ePool chlorine, any hypochlorite sanitiser, and any oxidiser or bleach-based product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso avoid storage with strong alkalis, oxidising agents and reducing agents. Complete one chemical step, rinse thoroughly with clean water, and use separate clearly labelled equipment before starting the next.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP159.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003eLess than 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003ePhosphoric acid, 60% w\/w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — heavy duty\u003c\/td\u003e\n\u003ctd\u003e1:4 to 1:8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — light duty\u003c\/td\u003e\n\u003ctd\u003e1:30 to 1:40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 to 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods, corrosive. The SDS states the product is not regulated for transport when packaged in 5 litres or smaller, so this 5 litre pack falls within that exemption.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6 (WHS); Schedule 5 (SUSMP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAluminium, tin and zinc; strong alkalis; oxidising and reducing agents; hypochlorite and other chlorine products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 4.3, issued 10 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing Between the Acid Restorers\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-15ltr\"\u003eActichem Grout Restore 60 15 Ltr\u003c\/a\u003e — the same product in the bulk pack. Note that 15 litres is above the SDS transport exemption.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e — 20% phosphoric acid, signal word WARNING, classified as an irritant rather than corrosive. Try this first.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e — urea hydrochloride based, low fuming, WARNING. The usual first choice on man-made tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-5-ltr\"\u003eActichem Tile \u0026amp; Grout Power\u003c\/a\u003e — alkaline. The correct choice on acid-sensitive stone and for greasy or organic soiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-1-ltr\"\u003eActichem Proneutro\u003c\/a\u003e — the neutralising rinse specified in the heavy-duty method above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInformation Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-Grout-Restore-AP159.05.pdf\"\u003eSafety Data Sheet — version 4.3, issued 10 July 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP159.05\u003c\/p\u003e\n\u003cp\u003eGrout Restore 60 is the strongest acid we stock for tile and grout, and it is corrosive. If you are not certain the substrate will tolerate it, contact Carpet Cleaners Warehouse before you order — a milder product that works is always the better outcome than a strong one that etches the floor.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5L","offer_id":43384971395285,"sku":"ST159.05","price":113.58,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Grout-Restore-60-5ltr.jpg?v=1780551434"},{"product_id":"actichem-grout-restore-60-15ltr","title":"Actichem Grout Restore 60 15ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePhosphoric acid cleaner for hard surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGrout Restore 60 is a detergent-boosted solution containing \u003cstrong\u003e60% active phosphoric acid\u003c\/strong\u003e for the effective and economical removal of cement and grout residues, mineral scale build-ups, and efflorescence. Its powerful blend of acid and penetrating agents provides tough action on general grime and is excellent for grout restoration.\u003c\/p\u003e\n\u003cp\u003eIt is the strongest of the three Actichem acid restorers and the correct choice when Tile \u0026amp; Grout Restore or Grout Restore 20 have not shifted the deposit. It is also the most hazardous — see Safety below. This 15 litre pack is the production size, and it is above the SDS transport exemption.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves grout smear and cement residues efficiently.\u003c\/li\u003e\n\u003cli\u003eTackles rust, efflorescence and years of scale build-up.\u003c\/li\u003e\n\u003cli\u003eDoubles as a maintenance cleaner or a neutraliser following strongly alkaline cleaning.\u003c\/li\u003e\n\u003cli\u003eCompatible with professional hard surface equipment — rotary scrubbers, auto-scrubbers and pressure washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable for ceramic, porcelain and other man-made tiles, and masonry surfaces. Use with care on sandstone, quarry tiles, terracotta, grout and slate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for acid-sensitive surfaces, including engineered stone, terrazzo, marble, limestone, granite and other natural stone. Avoid contact with all ferrous and non-ferrous metals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlways pre-test in an inconspicuous location for substrate sensitivity before starting.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMineral scale build-up, efflorescence, cement residues and heavy-duty applications — \u003cstrong\u003e1:4 to 1:8\u003c\/strong\u003e (200 to 110 ml per litre)\u003c\/li\u003e\n\u003cli\u003eGrout residues and light-duty applications — \u003cstrong\u003e1:30 to 1:40\u003c\/strong\u003e (30 to 20 ml per litre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication — heavy duty\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply with a mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow the solution to dry.\u003c\/li\u003e\n\u003cli\u003eScrub thoroughly with an applicable nylon scouring\/floor pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 30 minutes reaction time, then re-agitate.\u003c\/li\u003e\n\u003cli\u003eExtract or pick up the resultant slurry with extraction equipment.\u003c\/li\u003e\n\u003cli\u003eNeutralise remaining residues by rinsing thoroughly with a 1:300 solution (30 ml per 10 litres) of Actichem Tile \u0026amp; Grout Cleaner or Proneutro.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eApplication — light duty\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the diluted solution and scrub thoroughly with the applicable pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 30 minutes reaction time and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse well with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGrout Restore 60 is the most hazardous of Actichem’s three acid restorers. Read this section before you open the drum, even if you use the other two regularly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur page previously recorded only “Safety profile: Class 8 Corrosive”. That is a transport classification, and it is not wrong — but a transport class tells you nothing about PPE, first aid or what the product reacts with. The full classification is below.\u003c\/p\u003e\n\u003cp\u003eGrout Restore 60 is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2R\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003eless than 1\u003c\/strong\u003e (the SDS value; our page and Actichem’s both previously stated 1 to 1.5)\u003c\/li\u003e\n\u003cli\u003eActive: \u003cstrong\u003ephosphoric acid, 60% w\/w\u003c\/strong\u003e, with a proprietary surfactant at less than 10%\u003c\/li\u003e\n\u003cli\u003ePoisons schedule: Schedule 6 under the WHS classification; listed as Schedule 5 under the SUSMP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis 15 litre pack is regulated dangerous goods.\u003c\/strong\u003e The SDS exemption applies only to packs of 5 litres or smaller. Allow for that in freight and in how you store it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a genuine step up from Grout Restore 20.\u003c\/strong\u003e Grout Restore 20 is 20% phosphoric acid, signal word WARNING, and classified as an irritant. Grout Restore 60 is 60% phosphoric acid, signal word DANGER, and classified \u003cem\u003ecorrosive\u003c\/em\u003e — it causes irreversible eye damage and burns skin. Do not carry over the handling habits you use for the 20.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles and a full face shield\u003c\/strong\u003e, neoprene or butyl gloves, safety footwear, overalls and a PVC apron, with access to an eye wash unit and a safety shower. The face shield is specified in addition to goggles, not instead of them. Decanting from a 15 litre drum is the highest-splash operation with this product.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay — H314 means eye damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and footwear immediately. Flush the affected area with running water. Seek medical attention.\u003c\/p\u003e\n\u003ch2\u003eMetals, Mixing and Reactivity\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMetals.\u003c\/strong\u003e The SDS states that Grout Restore 60 is \u003cstrong\u003ecorrosive to aluminium, tin and zinc\u003c\/strong\u003e. Avoid contact with all ferrous and non-ferrous metals. Do not decant into or store in aluminium, galvanised, tin-plated or unlined metal containers. Acid attack on these metals also produces hydrogen, which is flammable, so ventilate confined areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlkali contact liberates heat.\u003c\/strong\u003e The SDS notes that contact with alkali generates heat. The 1:300 neutralising rinse specified in the method is safe because it is dilute. Never pour concentrated alkaline product onto spilled or undiluted Grout Restore 60 to neutralise it — dilute with plenty of water first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNever mix with chlorine.\u003c\/strong\u003e Mixing any acid with hypochlorite liberates chlorine gas, which causes severe respiratory injury and can be fatal in a confined space such as a shower recess, plant room or pool enclosure. Never mix, and never allow contact in a bucket, drain, extraction tank or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer\u003c\/a\u003e working solutions\u003c\/li\u003e\n\u003cli\u003ePool chlorine, any hypochlorite sanitiser, and any oxidiser or bleach-based product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso avoid storage with strong alkalis, oxidising agents and reducing agents. Complete one chemical step, rinse thoroughly with clean water, and use separate clearly labelled equipment before starting the next.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP159.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003eLess than 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003ePhosphoric acid, 60% w\/w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — heavy duty\u003c\/td\u003e\n\u003ctd\u003e1:4 to 1:8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — light duty\u003c\/td\u003e\n\u003ctd\u003e1:30 to 1:40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 to 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods, corrosive. The SDS exemption applies only to packs of 5 litres or smaller, so this 15 litre pack is regulated.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6 (WHS); Schedule 5 (SUSMP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAluminium, tin and zinc; strong alkalis; oxidising and reducing agents; hypochlorite and other chlorine products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 4.3, issued 10 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing Between the Acid Restorers\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60 5 Ltr\u003c\/a\u003e — the same product in a pack that falls within the SDS transport exemption\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-15-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e — 20% phosphoric acid, signal word WARNING, classified as an irritant rather than corrosive. Try this first.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-15-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e — urea hydrochloride based, low fuming, WARNING. The usual first choice on man-made tile.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-15-ltr\"\u003eActichem Tile \u0026amp; Grout Power\u003c\/a\u003e — alkaline. The correct choice on acid-sensitive stone and for greasy or organic soiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-15-ltr\"\u003eActichem Proneutro\u003c\/a\u003e — the neutralising rinse specified in the heavy-duty method above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInformation Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-Grout-Restore-AP159.05.pdf\"\u003eSafety Data Sheet — version 4.3, issued 10 July 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP159.15\u003c\/p\u003e\n\u003cp\u003eGrout Restore 60 is the strongest acid we stock for tile and grout, and it is corrosive. If you are not certain the substrate will tolerate it, contact Carpet Cleaners Warehouse before you order — a milder product that works is always the better outcome than a strong one that etches the floor.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15L","offer_id":43384971526357,"sku":"ST159.15","price":325.93,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Grout-Restore-60-15ltr.jpg?v=1780551435"},{"product_id":"actichem-deostor-extreme-5-ltr","title":"Actichem Deostor Extreme 5 Ltr","description":"\u003cp\u003eDeostor Extreme is Actichem's heavy-artillery odour control concentrate, for the jobs where a normal deodoriser has already failed. It is built for persistent, obnoxious odours - tobacco, curry, cadaverine - and it is highly concentrated. This listing is the 5 litre drum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is never used on its own.\u003c\/strong\u003e Actichem specify it as a booster that is always blended into another odour control product or a wash-down detergent. Used neat or over-applied it causes problems rather than solving them.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eDeostor Extreme employs a high concentration of the most powerful of Elimotech chemistry for rapid neutralisation of the toughest of obnoxious odours. Elimotech reacts and neutralises mal-odours at a micro-molecular level, so trapped, embedded and air-borne odours are neutralised rather than masked. Odour control is only as durable as the source removal that precedes it. Where contaminated material remains in place, odour can return as conditions change — treat the source first and use this to finish the job, not to substitute for it.\u003c\/p\u003e\n\u003cp\u003eEven a thorough disinfection and wash down of an area will not remove all odour molecules. Micro mal-odour particles exist in the air, trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an Odour Control Strategy.\u003c\/p\u003e\n\u003ch2\u003eWhen you actually need Extreme\u003c\/h2\u003e\n\u003cp\u003eReach for it when the odour source is one of the genuinely stubborn ones and a standard Deostor has not held:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy tobacco contamination\u003c\/li\u003e\n\u003cli\u003eCooking odours, particularly curry and other spice oils that have soaked into linings\u003c\/li\u003e\n\u003cli\u003eCadaverine and decomposition odours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor ordinary fire and smoke work, \u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire\u003c\/a\u003e is the right product. For decaying organic matter and waste, use Deostor Organic. Extreme is what you add to those when they are not enough on their own.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAlways used as an additive.\u003c\/strong\u003e Mix it into a ready-to-use Deostor or wash-down solution - never apply it neat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10-30 ml per litre of ready-to-use Deostor solution.\u003c\/li\u003e\n\u003cli\u003e15-40 ml per litre for initial knock-down applications.\u003c\/li\u003e\n\u003cli\u003e10-30 ml per litre of ready-to-use restoration wash-down solution.\u003c\/li\u003e\n\u003cli\u003eLaundering: 5-10 ml per kg of washing.\u003c\/li\u003e\n\u003cli\u003eSevere fire odour: 50 ml Deostor Fire plus 10 ml Deostor Extreme per litre of water.\u003c\/li\u003e\n\u003cli\u003ePhysically remove decaying organic matter or charred items first - no additive out-runs a source left in place.\u003c\/li\u003e\n\u003cli\u003eThe solution must actually reach the offending source. Airless paint sprayers suit larger areas.\u003c\/li\u003e\n\u003cli\u003eWhere organic contaminants are present, co-treat with a biocide and\/or an enzyme-bacteria blend.\u003c\/li\u003e\n\u003cli\u003ePre-test in an inconspicuous location for substrate sensitivity before treating the whole area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo not over-apply.\u003c\/strong\u003e Actichem warn against it explicitly. More is not better with this product.\u003c\/p\u003e\n\u003cp\u003eActichem list Deostor Extreme as compatible with Deostor Fire, Deostor Organic, Fire Fix, Fire Restore and Biosan II. \u003cstrong\u003eDo not add it to oxidising or chlorine solutions without consulting an Actichem technician.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe have corrected this page.\u003c\/strong\u003e It previously described this product as non-hazardous. That was wrong, and we would rather say so than quietly change it. Actichem's current safety data sheet classifies it as set out below.\u003c\/p\u003e\n\u003cp\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification: Eye Irritation Category 2A, Skin Sensitisation Category 1, Flammable Liquid Category 3, Carcinogenicity Category 1B, STOT Single Exposure Category 3.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH226 Flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eH317 May cause an allergic skin reaction\u003c\/li\u003e\n\u003cli\u003eH350 May cause cancer\u003c\/li\u003e\n\u003cli\u003eH336 May cause drowsiness or dizziness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlash point above 23 °C. HAZCHEM 3Y. The concentrate contains ethanol and isopropanol, which is why it is a flammable liquid - store it away from heat and ignition sources and keep the container closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on transport.\u003c\/strong\u003e Actichem state the product is \u003cem\u003enot regulated for transport of dangerous goods in pack sizes of 5 litres or less\u003c\/em\u003e. That exemption is about how it may be shipped. It does not mean the product is non-hazardous, and it does not change how you should store or handle it on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant.\u003c\/strong\u003e This product carries hazard statement \u003cstrong\u003eH350 - may cause cancer\u003c\/strong\u003e, and H317 for skin sensitisation. Treat it accordingly: gloves and eye protection, adequate ventilation, no skin contact, and keep it off anyone not trained to use it. Read the safety data sheet in full and make sure it reaches whoever is actually handling the product, not just whoever ordered it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Deostor-Extreme-AP523.pdf\"\u003eDownload the Actichem safety data sheet for AP523 (PDF, issued 1 October 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deostor Extreme\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP523\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP523.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre (also available in 1 litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrated odour control booster - additive only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFloral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e10-40 ml per litre of ready-to-use solution, depending on the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eAbove 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus\u003c\/a\u003e - smoke and soot odours from timber, paper, protein and synthetic fires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral\u003c\/a\u003e - smoke and soot odours from plastic and synthetic fires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic\u003c\/a\u003e - decaying matter, human and animal waste\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-spray-5-ltr\"\u003eDeostor Spray\u003c\/a\u003e - ready-to-use aerial room spray for small areas\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV\u003c\/a\u003e and \u003ca href=\"\/products\/actichem-odourtak-w-citrus-5-ltr\"\u003eOdourtak W\u003c\/a\u003e - ready-to-use fogging solutions for the finishing step\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeostor or Odourtak?\u003c\/h2\u003e\n\u003cp\u003eThey do different jobs and most fire and odour work uses both. \u003cstrong\u003eDeostor\u003c\/strong\u003e is a concentrate you dilute into your wash-down or knock-down solution - it treats the surfaces and the wash water during remediation. \u003cstrong\u003eOdourtak\u003c\/strong\u003e is ready to use and is fogged into the space afterwards, to reach the air and the cavities the smoke got into. Actichem's own Deostor instructions finish with fogging the area once the restoration is complete.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use Deostor Extreme on its own?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem specify it as an additive, always blended into another odour control product or a wash-down detergent. It is a booster, not a stand-alone treatment.\u003c\/p\u003e\n\u003ch3\u003eHow much do I add?\u003c\/h3\u003e\n\u003cp\u003e10-30 ml per litre of ready-to-use solution for general work, up to 40 ml per litre for initial knock-down. For severe fire odour the published blend is 50 ml Deostor Fire plus 10 ml Deostor Extreme per litre of water.\u003c\/p\u003e\n\u003ch3\u003eWhat if I use more?\u003c\/h3\u003e\n\u003cp\u003eDon't. Actichem warn specifically that over-application causes problems. If the odour is not shifting, the usual reason is that the source is still in place, not that the dose is too low.\u003c\/p\u003e\n\u003ch3\u003eIs it hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a Category 3 flammable liquid, a skin sensitiser, an eye irritant, and it carries hazard statement H350 - may cause cancer. Signal word is DANGER. Read the safety data sheet above and make sure whoever handles it has seen it. It is not regulated for dangerous goods transport in packs of 5 litres or less, but that is a shipping exemption and nothing more.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with bleach or an oxidiser?\u003c\/h3\u003e\n\u003cp\u003eNot without asking Actichem first. They call this out explicitly for chlorine and oxidising solutions.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eWhen a technician tells us they’ve got tobacco, curry or decomposition odour that simply won’t shift, our next question is usually, “Have you actually reached the source?” Deostor Extreme is designed as a booster for the severe jobs, but stronger chemistry still can’t compensate for contaminated material that should have been removed or cleaned. We’ve also learnt not to assume more is better with these products — over-application can leave its own persistent fragrance problem.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether the job needs Extreme or whether a standard Deostor will do, or how to blend it safely with what you already use? Ring Carpet Cleaners Warehouse before you order. This is a potent concentrate and it is worth getting the mix right the first time.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":43847168295125,"sku":"AP523.05","price":288.97,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Deostor-Extreme-5ltr.jpg?v=1780551456"},{"product_id":"actichem-deostor-extreme-1-ltr","title":"Actichem Deostor Extreme 1 Ltr","description":"\u003cp\u003eDeostor Extreme is Actichem's heavy-artillery odour control concentrate, for the jobs where a normal deodoriser has already failed. It is built for persistent, obnoxious odours - tobacco, curry, cadaverine - and it is highly concentrated. This listing is the 1 litre bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is never used on its own.\u003c\/strong\u003e Actichem specify it as a booster that is always blended into another odour control product or a wash-down detergent. Used neat or over-applied it causes problems rather than solving them.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eDeostor Extreme employs a high concentration of the most powerful of Elimotech chemistry for rapid neutralisation of the toughest of obnoxious odours. Elimotech reacts and neutralises mal-odours at a micro-molecular level, so trapped, embedded and air-borne odours are neutralised rather than masked. Odour control is only as durable as the source removal that precedes it. Where contaminated material remains in place, odour can return as conditions change — treat the source first and use this to finish the job, not to substitute for it.\u003c\/p\u003e\n\u003cp\u003eEven a thorough disinfection and wash down of an area will not remove all odour molecules. Micro mal-odour particles exist in the air, trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an Odour Control Strategy.\u003c\/p\u003e\n\u003ch2\u003eWhen you actually need Extreme\u003c\/h2\u003e\n\u003cp\u003eReach for it when the odour source is one of the genuinely stubborn ones and a standard Deostor has not held:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy tobacco contamination\u003c\/li\u003e\n\u003cli\u003eCooking odours, particularly curry and other spice oils that have soaked into linings\u003c\/li\u003e\n\u003cli\u003eCadaverine and decomposition odours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor ordinary fire and smoke work, \u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire\u003c\/a\u003e is the right product. For decaying organic matter and waste, use Deostor Organic. Extreme is what you add to those when they are not enough on their own.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAlways used as an additive.\u003c\/strong\u003e Mix it into a ready-to-use Deostor or wash-down solution - never apply it neat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10-30 ml per litre of ready-to-use Deostor solution.\u003c\/li\u003e\n\u003cli\u003e15-40 ml per litre for initial knock-down applications.\u003c\/li\u003e\n\u003cli\u003e10-30 ml per litre of ready-to-use restoration wash-down solution.\u003c\/li\u003e\n\u003cli\u003eLaundering: 5-10 ml per kg of washing.\u003c\/li\u003e\n\u003cli\u003eSevere fire odour: 50 ml Deostor Fire plus 10 ml Deostor Extreme per litre of water.\u003c\/li\u003e\n\u003cli\u003ePhysically remove decaying organic matter or charred items first - no additive out-runs a source left in place.\u003c\/li\u003e\n\u003cli\u003eThe solution must actually reach the offending source. Airless paint sprayers suit larger areas.\u003c\/li\u003e\n\u003cli\u003eWhere organic contaminants are present, co-treat with a biocide and\/or an enzyme-bacteria blend.\u003c\/li\u003e\n\u003cli\u003ePre-test in an inconspicuous location for substrate sensitivity before treating the whole area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo not over-apply.\u003c\/strong\u003e Actichem warn against it explicitly. More is not better with this product.\u003c\/p\u003e\n\u003cp\u003eActichem list Deostor Extreme as compatible with Deostor Fire, Deostor Organic, Fire Fix, Fire Restore and Biosan II. \u003cstrong\u003eDo not add it to oxidising or chlorine solutions without consulting an Actichem technician.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe have corrected this page.\u003c\/strong\u003e It previously described this product as non-hazardous. That was wrong, and we would rather say so than quietly change it. Actichem's current safety data sheet classifies it as set out below.\u003c\/p\u003e\n\u003cp\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification: Eye Irritation Category 2A, Skin Sensitisation Category 1, Flammable Liquid Category 3, Carcinogenicity Category 1B, STOT Single Exposure Category 3.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH226 Flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eH317 May cause an allergic skin reaction\u003c\/li\u003e\n\u003cli\u003eH350 May cause cancer\u003c\/li\u003e\n\u003cli\u003eH336 May cause drowsiness or dizziness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlash point above 23 °C. HAZCHEM 3Y. The concentrate contains ethanol and isopropanol, which is why it is a flammable liquid - store it away from heat and ignition sources and keep the container closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on transport.\u003c\/strong\u003e Actichem state the product is \u003cem\u003enot regulated for transport of dangerous goods in pack sizes of 5 litres or less\u003c\/em\u003e. That exemption is about how it may be shipped. It does not mean the product is non-hazardous, and it does not change how you should store or handle it on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant.\u003c\/strong\u003e This product carries hazard statement \u003cstrong\u003eH350 - may cause cancer\u003c\/strong\u003e, and H317 for skin sensitisation. Treat it accordingly: gloves and eye protection, adequate ventilation, no skin contact, and keep it off anyone not trained to use it. Read the safety data sheet in full and make sure it reaches whoever is actually handling the product, not just whoever ordered it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Deostor-Extreme-AP523.pdf\"\u003eDownload the Actichem safety data sheet for AP523 (PDF, issued 1 October 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deostor Extreme\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP523\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP523.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e1 litre (also available in 5 litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrated odour control booster - additive only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFloral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e10-40 ml per litre of ready-to-use solution, depending on the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eAbove 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus\u003c\/a\u003e - smoke and soot odours from timber, paper, protein and synthetic fires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral\u003c\/a\u003e - smoke and soot odours from plastic and synthetic fires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic\u003c\/a\u003e - decaying matter, human and animal waste\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-spray-5-ltr\"\u003eDeostor Spray\u003c\/a\u003e - ready-to-use aerial room spray for small areas\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV\u003c\/a\u003e and \u003ca href=\"\/products\/actichem-odourtak-w-citrus-5-ltr\"\u003eOdourtak W\u003c\/a\u003e - ready-to-use fogging solutions for the finishing step\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeostor or Odourtak?\u003c\/h2\u003e\n\u003cp\u003eThey do different jobs and most fire and odour work uses both. \u003cstrong\u003eDeostor\u003c\/strong\u003e is a concentrate you dilute into your wash-down or knock-down solution - it treats the surfaces and the wash water during remediation. \u003cstrong\u003eOdourtak\u003c\/strong\u003e is ready to use and is fogged into the space afterwards, to reach the air and the cavities the smoke got into. Actichem's own Deostor instructions finish with fogging the area once the restoration is complete.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use Deostor Extreme on its own?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem specify it as an additive, always blended into another odour control product or a wash-down detergent. It is a booster, not a stand-alone treatment.\u003c\/p\u003e\n\u003ch3\u003eHow much do I add?\u003c\/h3\u003e\n\u003cp\u003e10-30 ml per litre of ready-to-use solution for general work, up to 40 ml per litre for initial knock-down. For severe fire odour the published blend is 50 ml Deostor Fire plus 10 ml Deostor Extreme per litre of water.\u003c\/p\u003e\n\u003ch3\u003eWhat if I use more?\u003c\/h3\u003e\n\u003cp\u003eDon't. Actichem warn specifically that over-application causes problems. If the odour is not shifting, the usual reason is that the source is still in place, not that the dose is too low.\u003c\/p\u003e\n\u003ch3\u003eIs it hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a Category 3 flammable liquid, a skin sensitiser, an eye irritant, and it carries hazard statement H350 - may cause cancer. Signal word is DANGER. Read the safety data sheet above and make sure whoever handles it has seen it. It is not regulated for dangerous goods transport in packs of 5 litres or less, but that is a shipping exemption and nothing more.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with bleach or an oxidiser?\u003c\/h3\u003e\n\u003cp\u003eNot without asking Actichem first. They call this out explicitly for chlorine and oxidising solutions. \u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eWhen a technician tells us they’ve got tobacco, curry or decomposition odour that simply won’t shift, our next question is usually, “Have you actually reached the source?” Deostor Extreme is designed as a booster for the severe jobs, but stronger chemistry still can’t compensate for contaminated material that should have been removed or cleaned. We’ve also learnt not to assume more is better with these products — over-application can leave its own persistent fragrance problem.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether the job needs Extreme or whether a standard Deostor will do, or how to blend it safely with what you already use? Ring Carpet Cleaners Warehouse before you order. This is a potent concentrate and it is worth getting the mix right the first time.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"1LTR","offer_id":43847168360661,"sku":"AP523.01","price":72.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Deostor-Extreme-1ltr.jpg?v=1780551456"},{"product_id":"actichem-deostor-organic-5-ltr","title":"Actichem Deostor Organic 5 Ltr","description":"\u003cp\u003eDeostor Organic is a concentrated enzyme-based odour control additive for decomposition work. You dilute it into your wash-down or knock-down solution, so it treats the surfaces and the wash water while you are cleaning up. This listing is the 5 litre drum.\u003c\/p\u003e\n\u003cp\u003eIt is matched to the source: Organic is the grade for \u003cstrong\u003erotting organic matter, human and animal waste, and decomposition odours\u003c\/strong\u003e. Use a Deostor Fire grade for smoke and soot.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eDeostor Organic is powered by the innovative Elimotech chemistry for rapid neutralisation of stench caused by rotting organic matter. Elimotech reacts and neutralises mal-odours at a micro-molecular level, so trapped, embedded and air-borne odours are neutralised rather than masked. Odour control is only as durable as the source removal that precedes it. Where contaminated material remains in place, odour can return as conditions change — treat the source first and use this to finish the job, not to substitute for it.\u003c\/p\u003e\n\u003cp\u003eEven a thorough disinfection and wash down of an area will not remove all odour molecules. Micro mal-odour molecules exist in the air, trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an Odour Control Strategy.\u003c\/p\u003e\n\u003cp\u003eDeostor Organic is a deodoriser, not a disinfectant and not a biocide. On a job with biological contamination it works alongside your sanitiser or enzyme-bacteria product - it does not replace either.\u003c\/p\u003e\n\u003ch2\u003eWhich Deostor do I need?\u003c\/h2\u003e\n\u003cp\u003eThe Deostor grades are matched to what caused the odour, not to how strong it is. Picking the wrong one is the most common mistake with this range.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOdour source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eGrade\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSignal word\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDecaying matter, human and animal waste, rotting food\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDeostor Organic (AP520) - this product\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmoke and soot from timber, paper, protein and synthetic fires\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus (AP521)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eWarning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmoke and soot from plastic and synthetic fires\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral (AP522)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDanger - carries H350\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSevere persistent odours: tobacco, curry, cadaverine\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme (AP523)\u003c\/a\u003e - booster, always blended\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDanger - carries H350\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall areas, spot work, no fogging\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/actichem-deostor-spray-5-ltr\"\u003eDeostor Spray (AP524)\u003c\/a\u003e - ready to use\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDanger\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWhere the odour is severe, Organic and Extreme are designed to be used together rather than choosing between them - see the dosing below.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCategory 3 water losses and sewage backflows, after extraction and physical removal.\u003c\/li\u003e\n\u003cli\u003eTrauma, unattended death and hoarding cleans, as part of a wider decontamination process.\u003c\/li\u003e\n\u003cli\u003eAnimal waste and urine contamination in carpet, subfloor and hard surfaces.\u003c\/li\u003e\n\u003cli\u003eBin rooms, waste chutes, grease traps and commercial kitchens.\u003c\/li\u003e\n\u003cli\u003eDecomposing food in fridges, freezers and cool rooms after a power failure.\u003c\/li\u003e\n\u003cli\u003eLaundering contaminated soft furnishings and textiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eSupplied as a concentrate. Always dilute.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral use:\u003c\/strong\u003e 20-40 ml per litre of water (1:50 to 1:25). Use the stronger end for initial knock-down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs an additive:\u003c\/strong\u003e 10-30 ml per litre of your ready-to-use cleaning or restoration solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaundering:\u003c\/strong\u003e 5-10 ml per kilogram of washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSevere odours:\u003c\/strong\u003e 50 ml Deostor Organic plus 10 ml \u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e per litre of water.\u003c\/li\u003e\n\u003cli\u003eApply by pressure sprayer or cold\/wet fog. Airless paint sprayers suit larger areas.\u003c\/li\u003e\n\u003cli\u003ePhysically remove the decaying material first. No deodoriser will out-run a source that is still there.\u003c\/li\u003e\n\u003cli\u003eTreat biological contamination with a biocide and\/or an enzyme-bacteria blend as well - Deostor Organic controls the odour, not the organism.\u003c\/li\u003e\n\u003cli\u003ePre-test in an inconspicuous location before general application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBlends with:\u003c\/strong\u003e Clean Force, Biosan II and other wash-down detergents. \u003cstrong\u003eDo not\u003c\/strong\u003e add it to oxidising or chlorine solutions without checking with an Actichem technician first.\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe have corrected this page.\u003c\/strong\u003e It previously described this product as non-hazardous. That was wrong, and we would rather say so plainly than change it quietly. Actichem's current safety data sheet, issued 29 September 2025, classifies it as follows.\u003c\/p\u003e\n\u003cp\u003eSignal word: \u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification: Eye Irritation Category 2A, Skin Sensitisation Category 1, Flammable Liquid Category 3.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH226 Flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eH317 May cause an allergic skin reaction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlash point above 23 °C. HAZCHEM 3Y. The concentrate contains ethanol and isopropanol, which is why it is a flammable liquid - keep it away from heat and ignition sources and keep the container closed.\u003c\/p\u003e\n\u003cp\u003eH317 means repeated skin contact can sensitise you, and once you are sensitised it does not wear off. Gloves and eye protection, good ventilation, no skin contact. On decomposition work the personal protective equipment the job itself demands will normally exceed what this product needs - but do not let that be a reason to skip it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on transport.\u003c\/strong\u003e Actichem state the product is \u003cem\u003enot regulated for transport of dangerous goods in pack sizes of 5 litres or less\u003c\/em\u003e. That exemption is about how it may be shipped. It does not mean the product is non-hazardous, and it does not change how you store or handle it on site. We think that exemption is where the old wording on this page came from.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202509-Actichem-Deostor-Organic-AP520.pdf?v=1770612673\"\u003eDownload the Actichem safety data sheet for Deostor Organic AP520 (PDF, issued 29 September 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deostor Organic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP520.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrate - dilute before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eAqua blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFloral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:25 (20-40 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched to\u003c\/td\u003e\n\u003ctd\u003eDecaying matter, human and animal waste, rotting organic material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eAbove 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus\u003c\/a\u003e - timber, paper, protein and synthetic fires. Signal word Warning, no carcinogen classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral\u003c\/a\u003e - plastic and synthetic fires. Signal word Danger, carries H350.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e - booster for tobacco, curry and cadaverine. Always blended, never neat.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-spray-5-ltr\"\u003eDeostor Spray\u003c\/a\u003e - ready-to-use hand spray for small areas. Do not fog it.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV\u003c\/a\u003e and \u003ca href=\"\/products\/actichem-odourtak-w-citrus-5-ltr\"\u003eOdourtak W\u003c\/a\u003e - ready-to-use fogging deodorisers for finishing the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeostor or Odourtak?\u003c\/h2\u003e\n\u003cp\u003eThey do different jobs and most restoration work uses both.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeostor\u003c\/strong\u003e is a concentrate you dilute into your wash-down or knock-down solution. It treats the surfaces you are cleaning and the water you are cleaning with, while the work is happening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOdourtak\u003c\/strong\u003e is ready to use and is fogged into the space. It treats the air and the cavities the odour reached that you cannot wash.\u003c\/p\u003e\n\u003cp\u003eActichem's own instructions for Deostor end by telling you to fog the area once restoration is complete. Deostor during the clean, Odourtak to finish.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs Deostor Organic hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes, and this page used to say otherwise. Signal word \u003cstrong\u003eWarning\u003c\/strong\u003e: flammable liquid Category 3, serious eye irritation, and skin sensitisation. It is the lowest-hazard grade in the Deostor range, but it is not non-hazardous. Read the safety data sheet above.\u003c\/p\u003e\n\u003ch3\u003eWill it fix a sewage or unattended death job on its own?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a deodoriser. The source has to be physically removed and the area decontaminated with the appropriate biocide or enzyme-bacteria product. Deostor Organic controls what is left once you have done that work properly.\u003c\/p\u003e\n\u003ch3\u003eHow much do I use?\u003c\/h3\u003e\n\u003cp\u003e20-40 ml per litre of water for general use. 40 ml\/L for the first knock-down pass, then drop back. 10-30 ml per litre if you are adding it to a cleaning solution that is already made up.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with my sanitiser?\u003c\/h3\u003e\n\u003cp\u003eIt blends with Clean Force, Biosan II and normal wash-down detergents. Do not put it into an oxidising or chlorine-based solution without checking with an Actichem technician first.\u003c\/p\u003e\n\u003ch3\u003eOrganic or Extreme for a really bad job?\u003c\/h3\u003e\n\u003cp\u003eBoth. Extreme is a booster, not a substitute - it is always blended, never used neat. For a severe organic odour, 50 ml Deostor Organic plus 10 ml Deostor Extreme per litre of water. Note that Extreme carries a Danger signal word and H350, so read its safety data sheet before you introduce it.\u003c\/p\u003e\n\u003ch3\u003eCan I fog it?\u003c\/h3\u003e\n\u003cp\u003eYes - cold or wet fogging suits it, as does a pressure sprayer, and an airless paint sprayer for larger areas. Do not confuse it with Deostor Spray, which Actichem state must not be fogged at all.\u003c\/p\u003e\n\u003ch2\u003eTechnician's note\u003c\/h2\u003e\n\u003cp\u003eThe failure mode we hear about most on decomposition jobs is dosing hard and often instead of removing the source. Enzyme deodorisers work on the odour molecules that are left behind, not on a saturated subfloor or a bin that has not been emptied. Get the material out, get the moisture out, then treat - and fog the space at the end rather than trying to do everything through the wash water.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether you need the Organic grade, a Fire grade, or Extreme as a booster? Tell us what the odour source actually is and we will point you at the right one before you order.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":43847168491733,"sku":"AP520.05","price":221.21,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Deostor-Organic-5ltr.jpg?v=1780551456"},{"product_id":"actichem-deostor-spray-5-ltr","title":"Actichem Deostor Spray 5 Ltr","description":"\u003cp\u003eDeostor Spray is a ready-to-use odour neutraliser for misting and wiping - the one you reach for when the area is too small to justify setting up fogging equipment, or when you cannot leave a residue behind. This listing is the 5 litre pack.\u003c\/p\u003e\n\u003cp\u003eIt is a blend of Elimotech essential oils and volatile, polar solvents. The solvent carrier is what makes it flash off cleanly, and it is also why the product is flammable - see the safety section below before you order.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eDeostor Spray is powered by Elimotech chemistry for rapid neutralisation of mal-odours. Elimotech reacts with and neutralises odour molecules at a micro-molecular level, so trapped, embedded and air-borne odours are neutralised rather than masked. Odour control is only as durable as the source removal that precedes it. Where contaminated material remains in place, odour can return as conditions change — treat the source first and use this to finish the job, not to substitute for it.\u003c\/p\u003e\n\u003cp\u003eEven a thorough disinfection and wash down of an area will not remove all odour molecules. Micro mal-odour molecules exist in the air, trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an Odour Control Strategy.\u003c\/p\u003e\n\u003ch2\u003eWhere it earns its place\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerial room spray\u003c\/strong\u003e - misted through a trigger spray or pressure sprayer as a stand-alone treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall areas\u003c\/strong\u003e - localised spots too small to be worth bringing a fogger to.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-residue work\u003c\/strong\u003e - where you do not want to leave anything behind on the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray and wipe\u003c\/strong\u003e - smooth surfaces, appliances, household items.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjecting\u003c\/strong\u003e - into cushions, upholstery, carpet and soft furnishings, for odour from food and beverage spills, urine, mould or smoke.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eActichem list it as suitable for carpet, wool, upholstery, leather, natural stone, ceramic and porcelain, concrete and masonry, plasterboard, rubber, timber, vinyl and all surfaces. Pre-test in an inconspicuous location regardless - substrate sensitivity varies.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eSupplied \u003cstrong\u003eready to use\u003c\/strong\u003e. No dilution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not wet fog and do not thermal fog.\u003c\/strong\u003e Actichem state this explicitly. If you want to fog a space, use the \u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak\u003c\/a\u003e range, which is formulated for it.\u003c\/li\u003e\n\u003cli\u003eWear suitable respiratory protection when aerosolising Deostor Spray in any quantity.\u003c\/li\u003e\n\u003cli\u003eIt is flammable - take precautions against ignition sources while you are spraying and while it flashes off.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity before treating the whole area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe have corrected this page.\u003c\/strong\u003e It previously described Deostor Spray as non-hazardous. That was wrong, and we would rather say so plainly than change it quietly. Actichem's current safety data sheet, issued 1 October 2025, classifies it as follows.\u003c\/p\u003e\n\u003cp\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification: Eye Irritation Category 2A, Flammable Liquid Category 3.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH226 Flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlash point around 23 °C. HAZCHEM 3Y. Keep it away from heat, sparks and open flame, keep the container closed, and think about ignition sources before you start misting a room with it.\u003c\/p\u003e\n\u003cp\u003eActichem also specify \u003cstrong\u003esuitable respiratory protection when aerosolising it in large quantities\u003c\/strong\u003e, and eye protection is sensible given the H319 classification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on transport.\u003c\/strong\u003e Actichem state the product is \u003cem\u003enot regulated for transport of dangerous goods in pack sizes of 5 litres or less\u003c\/em\u003e. That exemption is about how it may be shipped. It does not mean the product is non-hazardous, and it does not change how you store or handle it on site. We think that exemption is where the old wording on this page came from.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Deostor-Spray-AP524.pdf\"\u003eDownload the Actichem safety data sheet for AP524 (PDF, issued 1 October 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deostor Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP524.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eNone - ready to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003ePurple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFresh floral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eAround 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot suitable for\u003c\/td\u003e\n\u003ctd\u003eWet fogging or thermal fogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus\u003c\/a\u003e - smoke and soot odours from timber, paper, protein and synthetic fires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral\u003c\/a\u003e - smoke and soot odours from plastic and synthetic fires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic\u003c\/a\u003e - decaying matter, human and animal waste\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e - booster for tobacco, curry and cadaverine, always blended, never neat\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV\u003c\/a\u003e and \u003ca href=\"\/products\/actichem-odourtak-w-citrus-5-ltr\"\u003eOdourtak W\u003c\/a\u003e - ready-to-use fogging solutions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpray, Deostor or Odourtak - which one?\u003c\/h2\u003e\n\u003cp\u003eThree different jobs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeostor Spray\u003c\/strong\u003e is ready to use and hand-applied. Small areas, spot work, injecting into soft furnishings, low residue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeostor Fire \/ Organic\u003c\/strong\u003e are concentrates you dilute into a wash-down or knock-down solution. They treat surfaces and the wash water during remediation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdourtak\u003c\/strong\u003e is ready to use and fogged into a space, to reach the air and the cavities. It is the finishing step, and it is the only one of the three you should put through fogging equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I fog it?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem say explicitly: do not wet fog and do not thermal fog Deostor Spray. It is designed to be misted by hand through a trigger or pressure sprayer. If the job needs fogging, use the Odourtak range.\u003c\/p\u003e\n\u003ch3\u003eDo I dilute it?\u003c\/h3\u003e\n\u003cp\u003eNo. It is supplied ready to use.\u003c\/p\u003e\n\u003ch3\u003eIs it hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a Category 3 flammable liquid and a serious eye irritant, signal word DANGER. The page used to say non-hazardous; that was wrong and has been corrected. Read the safety data sheet above and make sure whoever is spraying it has seen it. The fact that it ships unregulated in 5 litre packs is a transport exemption, not a hazard rating.\u003c\/p\u003e\n\u003ch3\u003eWhat protection should the operator wear?\u003c\/h3\u003e\n\u003cp\u003eActichem specify suitable respiratory protection when aerosolising in large quantities. Eye protection is sensible given the H319 classification. Ventilate the space and keep ignition sources away while you work.\u003c\/p\u003e\n\u003ch3\u003eWill it stain or damage the surface?\u003c\/h3\u003e\n\u003cp\u003eActichem list it as suitable for a wide range including carpet, wool, upholstery, leather, stone, timber and vinyl. That is not a substitute for pre-testing in an inconspicuous spot, which they and we both recommend every time.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eThere are plenty of jobs where setting up a fogger makes no sense — a cupboard, a cushion, a small smoke-affected room or one piece of upholstery. That’s where a ready-to-use treatment like Deostor Spray earns its keep. The important distinction is that it’s an aerial and direct-treatment product, not something to put through a thermal fogger, and on restoration work we generally think of it after the major remediation has been completed.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether the job calls for a hand spray, a dilutable Deostor or a fogging product? Ring Carpet Cleaners Warehouse before you order. Getting the application method right matters more than the fragrance, and with this one it also matters for safety.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":43847168557269,"sku":"AP524.05","price":139.37,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Deostor-Spray-5ltr.jpg?v=1780551457"},{"product_id":"actichem-percide-20ltr","title":"Actichem Percide 20ltr (TGA Listed)","description":"\u003cp\u003e\u003cstrong\u003eTGA listed for use against COVID-19 in the ARTG for legal supply in Australia. AUST L 332284.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s Percide is an advanced peroxide-based \u003cstrong\u003ehospital grade disinfectant\u003c\/strong\u003e for the eradication of mould and decontamination of infectious environments.\u003c\/p\u003e\n\u003cp\u003eIts formula penetrates deep into porous surfaces and reacts with mould spores and growth to eradicate them. It also removes the mould stain and brightens the surface being treated. Percide does not encapsulate or hide the mould — it attacks the spores and roots.\u003c\/p\u003e\n\u003cp\u003ePercide also displays strong biocidal activity against bacteria and viruses. Evaluated against the hospital grade disinfectant test and the AOAC hard surface carrier test, it achieves the kill rates tabulated below in 60 seconds.\u003c\/p\u003e\n\u003cp\u003eThis 20 litre drum is the production pack for remediation and biohazard contractors running the product daily.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA note on clearance reports:\u003c\/em\u003e earlier versions of this page said Percide ensures 100% clearance reports on every mould remediation job. Clearance depends on the whole remediation process — containment, source removal, physical removal of contaminated material, drying and independent verification. No product delivers a clearance result on its own. Percide is a very good disinfection and eradication step within that process.\u003c\/p\u003e\n\u003ch2\u003eMould\u003c\/h2\u003e\n\u003cp\u003ePercide’s peroxide formula has several design features that provide consistent, reliable results in mould remediation. It reacts aggressively on contact with mould, eradicating spores and lifting mould out of surface pores.\u003c\/p\u003e\n\u003cp\u003ePercide takes 10 minutes to achieve a greater than 4.4 log reduction against \u003cem\u003eAspergillus brasiliensis\u003c\/em\u003e. With a favourable and economical ready-to-use profile, it is a product of choice.\u003c\/p\u003e\n\u003ch2\u003eTrauma, Black Water, Biohazard Decontamination, CAT3\u003c\/h2\u003e\n\u003cp\u003ePercide’s primary function is rapid, powerful pathogen eradication even in the presence of organic soil. Its deep pore penetration makes it a strong decontamination and restoration tool for trauma, black water and bio-contamination applications.\u003c\/p\u003e\n\u003cp\u003ePercide leaves no oily or toxic residue and can be left as a residual after clean-up is complete. It is active against gram-positive and gram-negative bacteria, moulds, spores, and enveloped and non-enveloped viruses.\u003c\/p\u003e\n\u003ch2\u003eEfficacy — What the Listing Actually Covers\u003c\/h2\u003e\n\u003cp\u003eThese are the organisms and contact times behind the ARTG listing. Keep this table on file — it is what an auditor or a hygienist will ask for.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrganism\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eReduction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eContact time\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspergillus brasiliensis (mould, BS EN 1650)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePenicillium chrysogenum (mould, BS EN 1650)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStaphylococcus aureus\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePseudomonas aeruginosa\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4.4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSalmonella choleraesuis\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;8 log\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEscherichia coli\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;8 log\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProteus vulgaris\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;8 log\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoronavirus (Murine Hepatitis Virus)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolio Type 1 Virus\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;4 log (99.99%)\u003c\/td\u003e\n\u003ctd\u003e1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eContact time is the step that actually disinfects.\u003c\/strong\u003e One minute for bacteria and viruses, ten minutes for mould, and the surface must stay visibly wet for that whole period. On a warm or porous surface that usually means a second pass. A one-minute claim applied for fifteen seconds is not a disinfection.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced peroxide formula\u003c\/strong\u003e — disinfection and mould eradication performance in an easy-to-use form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — the anti-microbial package is combined with super-wetting technology, enabling the biocide to penetrate faster and deeper into fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning and destaining\u003c\/strong\u003e — lifts mould from surface pores and works on mould and bacterial discolouration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates odours\u003c\/strong\u003e — at their source, by anti-microbial action against odour-causing germs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInherently biodegradable\u003c\/strong\u003e — an environmentally responsible choice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo oily or toxic residue\u003c\/strong\u003e — can be left as a residual after clean-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eObserve all safety directions and read the SDS before use.\u003c\/li\u003e\n\u003cli\u003ePercide is suitable on most carpets and fabrics; some delicate fibres, and fibres destabilised by disaster activity, could be affected.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution — read this before you spray a synthetic carpet\u003c\/h3\u003e\n\u003cp\u003ePercide is supplied ready to use, and for hard surfaces \u003cstrong\u003eno dilution is necessary\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn textiles the position is different.\u003c\/strong\u003e Actichem’s product data sheet states that \u003cstrong\u003epolypropylene accepts the undiluted product, but other synthetics require 50% dilution.\u003c\/strong\u003e That distinction did not appear on this page previously and it matters — polypropylene is common in commercial loop pile, but nylon, polyester and wool blends are not polypropylene. Identify the fibre, or dilute 50% and pre-test.\u003c\/p\u003e\n\u003ch3\u003eBoosting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor heavy mould, mix \u003cstrong\u003e9 parts Percide to 1 part \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-boost-5ltr\"\u003ePercide Boost\u003c\/a\u003e\u003c\/strong\u003e for accelerated eradication and cleaning. Use within 6 hours.\u003c\/li\u003e\n\u003cli\u003eFor fogging applications Actichem specify \u003cstrong\u003e20 ml Percide Boost per litre of Percide\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePercide Boost is a corrosive Class 8 dangerous good.\u003c\/strong\u003e Percide is not. See the comparison under Safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove and clean away all wet and dry debris.\u003c\/li\u003e\n\u003cli\u003eApply Percide solution to the affected area, ensuring all surfaces come into contact with it. Apply by spray, wet fog, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate briefly where possible to promote penetration into porous substrates. Thorough agitation will dramatically aid mould and stain removal.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum of 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat for heavy mould conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e after cleaning and disinfection are complete, Percide can be applied as a post-residual treatment for enhanced inhibition of fresh mould growth.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEarlier versions of this page carried no hazard information at all. Percide is a mild product by the standards of this catalogue, but \"mild\" is a conclusion the customer should be able to check, not one we should ask them to assume.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePercide is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods and carries \u003cstrong\u003eno poisons schedule\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH319\u003c\/strong\u003e — causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eGHS: Eye Irritation Category 2 — and nothing else\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: 2P\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e6.2\u003c\/strong\u003e — close to neutral\u003c\/li\u003e\n\u003cli\u003eActive: \u003cstrong\u003ehydrogen peroxide, less than 8%\u003c\/strong\u003e by weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePercide and Percide Boost are not the same hazard\u003c\/h3\u003e\n\u003cp\u003eThese two products are sold together, mixed together and stored together. They are not equivalent, and their pages used to read as though they were.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePercide Boost\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statement\u003c\/td\u003e\n\u003ctd\u003eH319 — serious eye irritation\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eH314 — severe skin burns and eye damage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUN1760, Class 8, PG II\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e6.2\u003c\/td\u003e\n\u003ctd\u003e10.4 – 10.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide, under 8%\u003c\/td\u003e\n\u003ctd\u003ePotassium hydroxide and glycolic acid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies safety glasses with side shields or chemical goggles, chemical protective gloves (neoprene recommended), overalls, a PVC apron, barrier cream and access to an eyewash unit. H319 is the reason for the eye protection — this is a fogging and spraying product, and mist finds eyes. Decanting from a 20 litre drum is the other splash moment.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water for 10 to 15 minutes, removing contact lenses if present. Seek medical attention if pain persists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and wash with soap and water.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003ePercide is a peroxide. The SDS names \u003cstrong\u003ereducing agents, acids, alkalis and combustible organic matter\u003c\/strong\u003e as incompatible. In practice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with hypochlorite\u003c\/strong\u003e — \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eChlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e or pool chlorine. Two oxidisers together buy you nothing and behave unpredictably.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with acids\u003c\/strong\u003e — \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-15-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-15-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e or acid rinses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix with alkalis\u003c\/strong\u003e — other than Percide Boost, at the stated ratio, which is the one designed combination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not leave saturated rags or absorbent material balled up.\u003c\/strong\u003e Peroxide and combustible organic matter is a poor combination even at this concentration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso note that \u003cstrong\u003eanionic detergent residue and organic soil load reduce disinfectant performance.\u003c\/strong\u003e Clean first, rinse, then disinfect — and give it the full contact time.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP610.20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e20 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eARTG listing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eAUST L 332284\u003c\/strong\u003e — hospital grade disinfectant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide, less than 8% w\/w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e6.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — hard surfaces\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — polypropylene\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — other synthetics\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e50%\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact time — disinfection\u003c\/td\u003e\n\u003ctd\u003e1 minute, surface kept wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact time — mould remediation\u003c\/td\u003e\n\u003ctd\u003e10 minutes, surface kept wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoost ratio — heavy mould\u003c\/td\u003e\n\u003ctd\u003e9 parts Percide to 1 part Percide Boost; use within 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoost ratio — fogging\u003c\/td\u003e\n\u003ctd\u003e20 ml Percide Boost per litre of Percide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH319\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eReducing agents, acids, alkalis, combustible organic matter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 8 October 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide 5 Ltr\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-750ml\"\u003ePercide 750 ml\u003c\/a\u003e — the same product in smaller packs\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-boost-5ltr\"\u003eActichem Percide Boost 5 Ltr\u003c\/a\u003e — the activator for heavy mould. Corrosive Class 8 — read its page before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a peroxide product classified non-hazardous, for lighter work with no listing requirement\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-20l\"\u003eActichem Mould Exterminator\u003c\/a\u003e — the chlorine alternative. Corrosive dangerous goods, and not for textiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.ebs.tga.gov.au\/servlet\/xmlmillr6?dbid=ebs\/PublicHTML\/pdfStore.nsf\u0026amp;docid=BA6A26FC8DD4B1D6CA25885500435028\u0026amp;agid=(PrintDetailsPublic)\u0026amp;actionid=1\"\u003eAustralian Register of Therapeutic Goods Certificate\u003c\/a\u003e — AUST L 332284\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Percide-AP610.pdf\"\u003eSafety Data Sheet — version 2.3, issued 8 October 2025\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP610.20\u003c\/p\u003e\n\u003cp\u003eWorking to a scope that specifies a listed hospital grade disinfectant? Percide is listed, and the organism table above is what you can put in the file. If you are not sure whether your scope needs a listed product at all, contact Carpet Cleaners Warehouse before you order.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"20LTR","offer_id":44069895569621,"sku":"AP610.20","price":208.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Percide-20ltr-TGA-Listed.jpg?v=1780551496"},{"product_id":"actichem-actisorb-350g","title":"Actichem Actisorb 350g","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActisorb is a neutral absorption powder with non-scratch abrasives, used in \u003cstrong\u003epoultice\u003c\/strong\u003e form to draw stains out of porous surfaces — and as a mild abrasive booster for grout haze, wax residue and compacted soil.\u003c\/p\u003e\n\u003cp\u003eIt is a fine white to grey powder used in the cleaning and restoration of stone surfaces.\u003c\/p\u003e\n\u003ch2\u003eHow a poultice actually works\u003c\/h2\u003e\n\u003cp\u003eWorth understanding, because it explains every instruction below.\u003c\/p\u003e\n\u003cp\u003eAn oil stain in porous stone is not on the surface — it has soaked in. No amount of surface cleaning reaches it. A poultice works in two stages: \u003cstrong\u003ea solvent dissolves the stain within the stone, and then the absorbent powder draws the dissolved stain up and out as it dries.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhich means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe drying is the working part.\u003c\/strong\u003e A poultice that is rinsed off while still wet has dissolved the stain and left it where it was.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlower drying draws more out.\u003c\/strong\u003e That is why the instructions say to cover it — you are deliberately extending the working time, not protecting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness matters.\u003c\/strong\u003e A thin layer dries before it has drawn anything up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep stains may need more than one application.\u003c\/strong\u003e That is normal, not a failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e — an inert, neutral powder that can be mixed with almost any cleaning liquid to form a poultice. Compatible with solvents and alkalis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate safe\u003c\/strong\u003e — safe on all tile, stone, grout, masonry and cement, including sensitive polished granite, marble and limestone. The neutrality is the point: it carries whatever chemistry you choose without adding any of its own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning booster\u003c\/strong\u003e — the non-scratch abrasives add mechanical action for grout haze, porcelain wax removal and tough build-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eAll man-made and natural stone, concrete, tiles and grout. Use it to lift deep-set stains and oils from fine stone and masonry.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use. Always pre-test\u003c\/strong\u003e in an inconspicuous location for substrate sensitivity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActisorb is a fine powder — wear a dust mask.\u003c\/strong\u003e See the safety section.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eNot applicable. Actisorb can be mixed with almost any liquid to remove stains.\u003c\/p\u003e\n\u003ch3\u003ePoultice — for oil stains in stone and concrete\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMix Actisorb with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-pog-5-ltr\"\u003ePOG\u003c\/a\u003e to a \u003cstrong\u003etoothpaste consistency\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCover the stain with a \u003cstrong\u003e10 to 15 mm thick layer\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAllow to sit for a \u003cstrong\u003eminimum of 2 hours or until dry.\u003c\/strong\u003e Cover with plastic or similar to keep it out of direct sunlight and prolong the drying time.\u003c\/li\u003e\n\u003cli\u003eRinse or brush away.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRead POG’s safety section before you use it here.\u003c\/strong\u003e POG is classified DANGER with H332, AUH019 and Poisons Schedule 6, and a poultice means it sits on a surface for hours, evaporating. Do this in a ventilated space, not in a closed room.\u003c\/p\u003e\n\u003ch3\u003eScourer use — grout smear, cement residue, compacted grime\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMix Actisorb with a tile and grout cleaner to form a wet paste.\u003c\/li\u003e\n\u003cli\u003eScrub with a nylon pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAlternative for larger areas:\u003c\/strong\u003e apply the cleaning solution to the floor, sprinkle Actisorb over it to form a slurry, agitate with a low-speed scrubber using a red pad or brush, then extract the slurry and rinse well.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety: Non-hazardous”. That was wrong\u003c\/strong\u003e and has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP151, version 2.3 issued 9 July 2025, classifies Actisorb as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eWARNING\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH319\u003c\/strong\u003e — causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUH066\u003c\/strong\u003e — repeated exposure may cause skin dryness or cracking\u003c\/li\u003e\n\u003cli\u003eNo poisons schedule. Not a dangerous good.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIn fairness to the product, this is a mild classification\u003c\/strong\u003e — two statements, no schedule, not a dangerous good, and it is chemically inert. It is one of the gentler things in our stone range. But it is not non-hazardous, and there is one aspect that deserves more attention than the classification suggests.\u003c\/p\u003e\n\u003ch3\u003e⚠ It is a fine powder — the dust is the real issue\u003c\/h3\u003e\n\u003cp\u003eThe existing instruction to \u003cstrong\u003ewear a dust mask\u003c\/strong\u003e was already on this page and it is the right advice. Worth expanding on why:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH319 applies to dust in the eye\u003c\/strong\u003e just as much as to liquid. Sprinkling powder onto a floor at waist height puts it in the air at face height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny fine airborne dust is a respiratory irritant\u003c\/strong\u003e, independent of what it is made of.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe slurry method is the dustier one\u003c\/strong\u003e, because you are sprinkling loose powder over a wide area rather than mixing a small quantity into a paste. If you have a choice, mixing the paste in a container is both cleaner and safer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA dust mask and eye protection while handling the dry powder. Once it is a paste, the dust issue is gone.\u003c\/p\u003e\n\u003ch3\u003e⚠ The chemistry it carries is the chemistry that matters\u003c\/h3\u003e\n\u003cp\u003eActisorb is inert. \u003cstrong\u003eThe hazard on any given job comes from whatever you mix it with\u003c\/strong\u003e — and because a poultice sits on the surface for hours, the exposure period is far longer than a normal cleaning application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet of the liquid you are mixing in\u003c\/strong\u003e, and treat the poultice as though that product is present the whole time it is drying. That is exactly what is happening.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Rinse with water, holding the eyelids apart. Seek medical attention if irritation persists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Wash with water. Repeated exposure dries the skin — wash and moisturise rather than letting it accumulate over a working week.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP151.005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e350 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eNeutral absorbent poultice powder with non-scratch abrasive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite to tan powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eNot applicable — mix with a cleaning liquid to a paste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — neutral and inert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eProprietary surfactant 10–30%; EDTA tetrasodium salt (CAS 64-02-8) under 10%; non-hazardous ingredients over 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH319, AUH066\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 9 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-pog-5-ltr\"\u003eActichem POG\u003c\/a\u003e — the citrus solvent used with Actisorb for oil stains in stone and concrete. \u003cstrong\u003eRead its safety section\u003c\/strong\u003e — DANGER, H332, AUH019, Poisons Schedule 6.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-5l\"\u003eActichem Tile \u0026amp; Grout Cream\u003c\/a\u003e — for tile and grout cleaning tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-Actisorb-AP151.pdf\"\u003eActichem Actisorb safety data sheet (AP151, version 2.3, 9 July 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP151.005\u003c\/p\u003e\n\u003cp\u003eFacing an oil stain in stone or concrete and not sure which liquid to poultice with? Send us a photo and tell us the substrate. Poulticing is one of the few genuinely effective ways to get a deep stain out of porous stone, and the choice of solvent is what determines whether it works.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"350G","offer_id":44122346422485,"sku":"AP151.005","price":50.79,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Actisorb-350g.jpg?v=1780551501"},{"product_id":"actichem-tile-and-grout-cream-5l","title":"Actichem Tile and Grout Cream 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Tile \u0026amp; Grout Cream is a thickened solvent gel for the hard-surface jobs that water-based cleaners cannot solve — factory wax coatings on porcelain, grout haze, ground-in grease and oil, paint spots, gum, cosmetics and sticky residues on stone, tile, concrete and masonry.\u003c\/p\u003e\n\u003cp\u003eTwo things make it work. The first is the solvent blend: heavy hydrotreated naphtha and d-limonene, which dissolve waxes, oils and adhesive residues that detergents simply cannot reach. The second is that it is a gel rather than a liquid, so it stays where you put it — including on a vertical surface — and keeps working through a 10 to 20 minute dwell instead of running off. A fine micro-abrasive gives it mechanical bite for grout haze.\u003c\/p\u003e\n\u003cp\u003eIt is a genuinely capable product. It is also, on Actichem's own current safety data sheet, the most hazardous chemical in Actichem's hard-surface range. Please read the safety section below before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do I need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 ml (AP152.005)\u003c\/strong\u003e — spot work, grout haze on a single job, vertical and detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 litre (AP152.05)\u003c\/strong\u003e — full-floor wax stripping, restoration work and regular commercial use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth packs are the same formulation. Note that Actichem's dangerous goods exemption applies to packs of 5 litres or less, which covers both pack sizes offered here.\u003c\/p\u003e\n\u003ch2\u003eImportant Safety Correction\u003c\/h2\u003e\n\u003cp\u003eUntil this page was reviewed, Carpet Cleaners Warehouse described Tile \u0026amp; Grout Cream as non-hazardous, with ingredients \"selected for their low hazard and non-toxic safety profiles\". \u003cstrong\u003eThat was wrong, and we have corrected it.\u003c\/strong\u003e If you have bought this product from us previously and wrote your risk assessment on that basis, please read this section and revise it.\u003c\/p\u003e\n\u003cp\u003eActichem's current safety data sheet — version 2.3, issued 9 July 2025 — classifies Tile \u0026amp; Grout Cream as follows.\u003c\/p\u003e\n\u003ch3\u003eClassification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH360D — May damage the unborn child.\u003c\/strong\u003e Toxic to Reproduction Category 1B. This is the classification that matters most and it is driven by the N-methyl-2-pyrrolidone content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH304 — May be fatal if swallowed and enters airways.\u003c\/strong\u003e Aspiration Hazard Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH226 — Flammable liquid and vapour.\u003c\/strong\u003e Flammable Liquids Category 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317 — May cause an allergic skin reaction.\u003c\/strong\u003e Skin Sensitiser Category 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315 — Causes skin irritation.\u003c\/strong\u003e Skin Corrosion\/Irritation Category 2.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePoisons Schedule 5.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComposition\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNaphtha, petroleum, heavy, hydrotreated (CAS 64742-48-9)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ed-Limonene (CAS 5989-27-5)\u003c\/td\u003e\n\u003ctd\u003e30 – 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eN-methyl-2-pyrrolidone (CAS 872-50-4)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat this means in practice\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkers who are pregnant, or who may become pregnant, should not use this product.\u003c\/strong\u003e H360D is a reproductive toxicity classification, not a precaution. N-methyl-2-pyrrolidone is listed in Schedules 5 and 6 of the Poisons Standard. If your crew includes anyone in that position, plan the job around it — this is a substitution decision, not a personal-protective-equipment decision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation is essential, not advisory.\u003c\/strong\u003e Actichem specifies local exhaust ventilation where natural ventilation is poor, and a gas filter for organic compounds or a combination vapour\/aerosol filter to AS\/NZS 1715 and 1716. Small bathrooms, unventilated commercial kitchens and enclosed plant rooms are exactly where this product is most often used and where the exposure risk is highest. Open the space up, or use forced ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreat it as flammable.\u003c\/strong\u003e H226. Keep it away from heat, sparks, open flame and hot surfaces. Do not use it near a gas hot water service pilot light, a running burnisher motor, or hot work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317 is a sensitiser warning.\u003c\/strong\u003e Repeated skin contact can produce an allergic reaction that then recurs at much lower exposures. Once someone is sensitised to d-limonene, they stay sensitised.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever siphon or transfer by mouth, and never decant into a drink container.\u003c\/strong\u003e H304 means a small quantity aspirated into the lungs can be fatal. Keep it in its labelled container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye and face protection:\u003c\/strong\u003e safety glasses with side shields or chemical goggles. \u003cstrong\u003eBody:\u003c\/strong\u003e overalls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix\u003c\/strong\u003e with oxidising agents, strong acids, nitrates or chlorine bleach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eActichem's own product listing now also carries the DANGER classification. Our previous description was simply out of date.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Choose It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt removes factory wax from porcelain.\u003c\/strong\u003e This is the job it is best known for. New porcelain tile often arrives with a protective wax coating that ordinary cleaners smear rather than remove, leaving a patchy sheen that shows up under raking light. Tile \u0026amp; Grout Cream dissolves it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrout haze.\u003c\/strong\u003e The micro-abrasive content lets it cut cementitious haze without the acid wash that would attack the grout itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stays put.\u003c\/strong\u003e A gel body means full dwell time on vertical surfaces — shower walls, splashbacks, feature stone, graffiti on masonry — where a liquid degreaser would simply run to the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent power without an aggressive pH.\u003c\/strong\u003e Because the cleaning is done by solvents rather than caustic, it can be used on marble, limestone and other acid- and alkali-sensitive stone that a strong degreaser would etch or dull.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt penetrates films.\u003c\/strong\u003e The formulation separates soil and wax films from the substrate so they can be flushed away, rather than emulsifying them into a slurry that redeposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFactory wax coating removal from porcelain and ceramic tile\u003c\/li\u003e\n\u003cli\u003eGrout haze removal from tile and stone\u003c\/li\u003e\n\u003cli\u003eGrease, oil and grime removal from natural stone, polished concrete and tile\u003c\/li\u003e\n\u003cli\u003eStain removal from stone, concrete and tile — sticky residues, paint spots, chewing gum, food and drink staining, cosmetics\u003c\/li\u003e\n\u003cli\u003eGraffiti and adhesive residue on masonry and vertical surfaces\u003c\/li\u003e\n\u003cli\u003eDeep-set grime and grease on marble, fine stone, porcelain and tile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous location. Ready to use — do not dilute.\u003c\/p\u003e\n\u003ch3\u003eFloor surfaces\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVentilate the area before you start.\u003c\/li\u003e\n\u003cli\u003eApply Tile \u0026amp; Grout Cream directly to the affected area.\u003c\/li\u003e\n\u003cli\u003eScrub thoroughly with a slow-speed scrubber fitted with a suitable nylon pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 20 minutes dwell time for penetration and lifting of oily soils or wax films. Do not let it dry out.\u003c\/li\u003e\n\u003cli\u003eScrub again, then rinse well with clean water or a detergent solution.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eVertical surfaces\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply directly to the surface, or onto a non-scratch nylon scouring pad.\u003c\/li\u003e\n\u003cli\u003eSpread over the surface and agitate.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes dwell time.\u003c\/li\u003e\n\u003cli\u003eScrub or agitate, then rinse well with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eAfter the job\u003c\/h3\u003e\n\u003cp\u003eRinse thoroughly. Solvent residue left on a floor will attract soil, can soften some sealers and coatings, and will interfere with any sealer applied afterwards. If you intend to seal the surface, allow it to dry completely and confirm the sealer manufacturer's requirements before application.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility and Cautions\u003c\/h2\u003e\n\u003cp\u003eActichem lists natural stone, ceramic and porcelain, concrete and masonry, rubber and vinyl as suitable surfaces. Some practical qualifications are worth stating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt will remove sealers and coatings as well as wax.\u003c\/strong\u003e That is the same chemistry working. If the floor is sealed and you want to keep the sealer, this is the wrong product. If you are stripping to re-seal, it is the right one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVinyl and rubber:\u003c\/strong\u003e pre-test. Solvent gels can soften some plasticised vinyl and can lift the pattern layer on cheaper sheet vinyl with extended dwell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolished stone:\u003c\/strong\u003e the micro-abrasive is fine, but on a high-gloss honed or polished finish it should be worked with a soft nylon pad rather than an aggressive one, and pre-tested in a hidden area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePainted and powder-coated surfaces:\u003c\/strong\u003e it removes paint spots, which means it can also attack the paint you want to keep. Keep it off skirtings, painted door frames and coated aluminium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjacent carpet and soft furnishings:\u003c\/strong\u003e mask them. A solvent gel on carpet is a difficult problem to reverse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing it in an unventilated room.\u003c\/strong\u003e This is the single most common mistake with this product and the most consequential one, given the classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssuming pH 6 means mild.\u003c\/strong\u003e Actichem publishes a pH of 6 for this product on their marketing material, while the safety data sheet records pH as not applicable — which is correct, because the product is a water-immiscible solvent gel with a relative density of 0.89. There is no meaningful aqueous pH to measure. Do not use the pH figure as a guide to how gentle the product is; the hazard here comes from the solvents, not from acidity or alkalinity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLetting it dry on the surface.\u003c\/strong\u003e Dwell means damp, not dry. A dried film is harder to rinse and can leave a residue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkipping the rinse.\u003c\/strong\u003e Solvent residue attracts soil and defeats any sealer applied afterwards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing it as a general-purpose floor cleaner.\u003c\/strong\u003e It is a stripping and spot-removal product. For routine maintenance cleaning of sealed stone, use a neutral cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring it near ignition sources or in a hot vehicle\u003c\/strong\u003e in an Australian summer. H226.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP152\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAP152.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite gel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eOrange citrus (from the d-limonene content)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e0.89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility in water\u003c\/td\u003e\n\u003ctd\u003eImmiscible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — solvent gel, not an aqueous solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 – 20 minutes (floors); 5 – 10 minutes (vertical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH226, H304, H315, H317, H360D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons Schedule\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport in packs of 5 litres or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eOxidising agents, strong acids, nitrates, chlorine bleach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActichem's safety data sheet records the flash point as \"not available\" while classifying the product as a Category 3 flammable liquid, which implies a flash point between 23 °C and 60 °C. We have asked Actichem to publish the measured value. Until they do, treat the product as flammable and store it accordingly.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does a citrus-smelling cream carry a DANGER classification?\u003c\/h3\u003e\n\u003cp\u003eThe citrus smell is d-limonene, which makes up 30 to 60% of the product. It is a natural terpene solvent, but \"natural\" and \"low hazard\" are not the same thing — d-limonene is a skin sensitiser and an aspiration hazard. The reproductive toxicity classification comes from the N-methyl-2-pyrrolidone content, which is present at under 10% and carries no odour at all. A pleasant smell tells you nothing useful about a product's hazard profile.\u003c\/p\u003e\n\u003ch3\u003eIs there a safer alternative for routine tile and grout cleaning?\u003c\/h3\u003e\n\u003cp\u003eYes, and for most maintenance work you should be using one. Tile \u0026amp; Grout Cream is a stripping and problem-solving product, not a routine cleaner. For regular cleaning of sealed stone and tile, Actichem Stone Soap or a neutral detergent is the right tool. Reserve this product for wax removal, grout haze and stains that nothing milder will shift.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on marble?\u003c\/h3\u003e\n\u003cp\u003eYes — it is one of the reasons the product exists. Because it works by solvent action rather than acid or caustic, it does not etch calcareous stone the way an acidic tile cleaner would. Pre-test on polished finishes and use a soft pad.\u003c\/p\u003e\n\u003ch3\u003eWill it damage grout?\u003c\/h3\u003e\n\u003cp\u003eIt is not acidic, so it does not attack cementitious grout the way an acid haze remover can. It will, however, remove a grout sealer along with everything else. Plan to re-seal.\u003c\/p\u003e\n\u003ch3\u003eWhat ventilation is actually enough?\u003c\/h3\u003e\n\u003cp\u003eActichem specifies local exhaust ventilation where natural ventilation is poor, and respiratory protection with an organic vapour filter to AS\/NZS 1715 and 1716. As a working rule: if you can smell it strongly and the room is enclosed, ventilation is not adequate. Open external doors and windows, use a fan to move air out of the space rather than around it, and take breaks outside the area.\u003c\/p\u003e\n\u003ch3\u003eCan it be diluted to make it go further or make it milder?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a gel formulation supplied ready to use. Adding water to a water-immiscible product breaks the gel and does not reduce the hazard of the solvent that remains.\u003c\/p\u003e\n\u003ch3\u003eDoes the 5 litre pack attract a dangerous goods surcharge?\u003c\/h3\u003e\n\u003cp\u003eActichem's safety data sheet states the product is not regulated for transport of dangerous goods in packs of 5 litres or less, which covers both pack sizes we supply. If a shipping surcharge appears at checkout that you believe is incorrect, contact us before ordering.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-500ml\"\u003eActichem Tile \u0026amp; Grout Cream 500 ml\u003c\/a\u003e — the same formulation in the other pack size. Identical classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-soap-5-ltr\"\u003eActichem Stone Soap\u003c\/a\u003e — the routine maintenance cleaner for sealed stone. Use this for regular work and keep Tile \u0026amp; Grout Cream for the problems.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-sealer-pro-5l\"\u003eActichem Stone Sealer Pro\u003c\/a\u003e — the sealer to apply after stripping. Non-hazardous, water based.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — neutral cleaner recommended for ongoing maintenance of sealed surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eTile \u0026amp; Grout Cream does a job that nothing milder will do: it strips factory wax, grout haze, ground-in grease and adhesive residue from stone, tile, concrete and masonry, on horizontal and vertical surfaces alike, without the acid or caustic attack that would damage the substrate. That capability is worth having in the van.\u003c\/p\u003e\n\u003cp\u003eIt is also a Category 1B reproductive toxicant, an aspiration hazard and a flammable liquid, and it was previously listed on this page as non-hazardous. It is the right product for a specific set of jobs, used with proper ventilation, by someone who has read the safety data sheet. It is the wrong product for routine floor maintenance and the wrong product for anyone who is or may become pregnant.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-TG-CreamAP152.pdf\"\u003eActichem Tile \u0026amp; Grout Cream Safety Data Sheet — version 2.3, issued 9 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf your safe work method statement for this product was written on the basis that it was non-hazardous, it needs to be redone.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP152.05\u003c\/p\u003e\n\u003cp\u003eNot sure whether you need a stripper or a maintenance cleaner? Contact Carpet Cleaners Warehouse before you order. On most hard-floor jobs the milder product is the correct one — and where it is not, we would rather you knew what you were handling.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"EACH","offer_id":44122346455253,"sku":"AP152.05","price":342.76,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Tile-and-Grout-Cream-5L.jpg?v=1780551501"},{"product_id":"actichem-solv-sealer-pro-5l","title":"Actichem Solv Sealer Pro 5L","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eProfessionally formulated solvent-based penetrating sealer providing exceptional protection for porcelain, low porosity tiles and fine stone. It is based on “ultra-small molecule structure” technology which enables it to penetrate into the fine pores of polished porcelain, dense granite and fine stone to create a high-performance sub-surface barrier against water and oil-borne contaminants.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides premium protection for up to 5 years\u003c\/li\u003e\n\u003cli\u003eIndependently performance tested by a NATA approved stone laboratory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual protection\u003c\/strong\u003e — against water and oil-borne contaminants including food and beverage stains, oil and greasy stains, biological growth such as mould and mildew, efflorescence, pollution and weathering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetains newness\u003c\/strong\u003e — formulated for ultimate protection of granite, polished marble, polished porcelain and similar low porosity substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural look\u003c\/strong\u003e — will not discolour or alter the natural look of recommended substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV stable\u003c\/strong\u003e — ideally suited for both indoor and outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVapour permeable\u003c\/strong\u003e — will not trap moisture. Does not hinder the natural passage of water vapour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC content\u003c\/strong\u003e, which makes it more pleasant to use than many solvent sealers. \u003cstrong\u003eLow VOC is not the same as low hazard\u003c\/strong\u003e — see the Safety section below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eFormulated to provide premium protection from staining to all forms of tiles and fine stone, but performs with special distinction on low porosity and dense tile and stone, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished porcelain, unglazed and semi-vitrified ceramics, and grout\u003c\/li\u003e\n\u003cli\u003ePolished and\/or dense granite, marble and fine stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso provides excellent protection to terracotta, Saltillo, slate, quarry tile, terrazzo and grout lines.\u003c\/p\u003e\n\u003ch2\u003eExpected Wear\u003c\/h2\u003e\n\u003cp\u003eSolv Sealer Pro will provide excellent protection for up to 5 years. However, application methods, weather conditions, traffic and harsh cleaning methods will affect wear. \u003cstrong\u003eAvoid the use of solvents, strong acids and strong alkalis for extended sealer life.\u003c\/strong\u003e Cleaning with Actichem Proneutro is recommended. Re-apply every 2 – 3 years where harsh conditions exist.\u003c\/p\u003e\n\u003ch2\u003eConsiderations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot to be used as sub-terrain waterproofing.\u003c\/li\u003e\n\u003cli\u003eDo not apply if the temperature is above 40 °C, or if rain is expected within 2 hours of application.\u003c\/li\u003e\n\u003cli\u003eIf rain has preceded application, allow the surface 24 hours to dry completely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous location for sensitivity to chemicals.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eCoverage varies dramatically with porosity, but is normally:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 – 10 m² per litre per coat\u003c\/strong\u003e — open structure, highly porous substrates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 – 20 m² per litre per coat\u003c\/strong\u003e — dense, less porous substrates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750 linear metres per litre\u003c\/strong\u003e — 2 coats on 3 mm grout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e260 linear metres per litre\u003c\/strong\u003e — 2 coats on 8 mm grout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplication on large concrete areas should be based on a preset coverage rate using a dedicated sprayer or painting equipment. No subsequent removal of excess product is required.\u003c\/p\u003e\n\u003ch3\u003eSurface preparation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew installations must be fully cured before application of Solv Sealer Pro\u003c\/strong\u003e — minimum 48 hours, however some concrete installations may take up to 7 days to cure. Confirm with the structural engineer.\u003c\/li\u003e\n\u003cli\u003eExisting stone and grout must be totally clean, dry and chemical free.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight. \u003cstrong\u003eTemperature must be between 10 °C and 28 °C.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHighly absorbent surfaces may require two coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDilution:\u003c\/strong\u003e ready to use.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply 1 to 2 coats by generously saturating the surface using a polish applicator, roller or sprayer, to an area which can be easily reached (approximately 15 m²).\u003c\/li\u003e\n\u003cli\u003eEnsure even coverage. \u003cstrong\u003eThe surface must be shiny wet with a liquid film for at least 1 minute.\u003c\/strong\u003e For very porous substrates more sealer may need to be applied.\u003c\/li\u003e\n\u003cli\u003eAllow 5 – 10 minutes for the sealer to absorb, then move the excess product with a squeegee to a new section.\u003c\/li\u003e\n\u003cli\u003eIf a second coat is to be applied, wait 20 to 30 minutes and repeat the process.\u003c\/li\u003e\n\u003cli\u003eUsing absorbent towelling or an applicator, wipe off any sealer remaining on the surface within 10 minutes of the last application. Moisten the towel with methylated spirits to remove residues which have dried on the surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAllow 6 hours before returning the area to traffic. Keep dry for 12 hours. Full cure in 24 – 48 hours.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section before your next job. This listing previously recorded only “Safety profile: Class 3 Flammable”. That is a transport classification. It is not wrong, but it is badly incomplete — it tells you nothing about what this product does to a person. It has been corrected.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP169, version 2.3 issued 15 July 2025, classifies Solv Sealer Pro as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the Model WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods, and packs of 5 litres or less are not regulated for transport.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH226\u003c\/strong\u003e — flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH304\u003c\/strong\u003e — may be fatal if swallowed and enters airways\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUH066\u003c\/strong\u003e — repeated exposure may cause skin dryness and cracking\u003c\/li\u003e\n\u003cli\u003eFlash point: \u003cstrong\u003egreater than 24 °C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e3Y\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoisons Schedule: \u003cstrong\u003e5\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ Low VOC is not the same as low hazard\u003c\/h3\u003e\n\u003cp\u003eThe benefits list above notes the low VOC content, and that is true — it is more pleasant to use than many solvent sealers. \u003cstrong\u003eIt does not make the product mild.\u003c\/strong\u003e Solv Sealer Pro contains hydrotreated naphtha at 10–30% and n-butyl acetate at 10–30%, carries a DANGER signal word, and presents a genuine aspiration hazard.\u003c\/p\u003e\n\u003cp\u003eWe have kept the low VOC claim because it is accurate and useful. We have added this note because a pleasant odour is the least reliable guide to how hazardous a solvent is.\u003c\/p\u003e\n\u003ch3\u003e⚠ H304 — the hazard the old wording hid\u003c\/h3\u003e\n\u003cp\u003eH304 means \u003cstrong\u003emay be fatal if swallowed and enters airways\u003c\/strong\u003e. With a hydrocarbon solvent the risk is not poisoning from a large dose. It is that a small amount reaching the lungs — from swallowing, from vomiting after swallowing, or from siphoning by mouth — causes chemical pneumonitis, which can be fatal and can develop hours later.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever siphon or transfer this product by mouth\u003c\/strong\u003e, and never decant it into an unlabelled drink container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it is swallowed, do NOT induce vomiting.\u003c\/strong\u003e Rinse the mouth with water and call a Poisons Information Centre or doctor immediately. Vomiting is what draws it into the lungs.\u003c\/li\u003e\n\u003cli\u003eSymptoms can be delayed. Anyone who has swallowed it needs medical assessment even if they seem fine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlammability\u003c\/h3\u003e\n\u003cp\u003eThe flash point is above 24 °C — higher than \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-defender-sv-5-ltr\"\u003eDefender SV\u003c\/a\u003e at 20 °C, but this is still a flammable liquid. Keep away from ignition sources, hot surfaces and sparks. Vapour is heavier than air and will collect in sub-floors, pits and confined spaces. Ventilate continuously — sealing is extended application over a large area, not a spot treatment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote that the finishing step uses methylated spirits\u003c\/strong\u003e, which is itself flammable. Keep both away from ignition sources, and dispose of solvent-soaked towelling safely rather than bundling it up.\u003c\/p\u003e\n\u003ch3\u003e⚠ It will damage plastics, rubber and coatings\u003c\/h3\u003e\n\u003cp\u003eActichem state that Solv Sealer Pro \u003cstrong\u003ereacts violently with strong oxidisers\u003c\/strong\u003e, is incompatible with caustics, strong acids and nitrates, and \u003cstrong\u003edissolves rubber, many plastics, resins and some coatings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck before you fill a sprayer or start work near vinyl skirting, PVC trims, expansion joints, painted surfaces and rubber-backed matting. \u003cstrong\u003eUse solvent-rated sprayers and applicators only\u003c\/strong\u003e — a standard garden sprayer will fail.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eActichem specify \u003cstrong\u003echemical protective gloves, for example PVC\u003c\/strong\u003e. \u003cstrong\u003eGlove material is not interchangeable across our solvent range.\u003c\/strong\u003e AUH066 means repeated exposure dries and cracks the skin — gloves matter over a full day of sealing, not just for the first application. Also wear chemical goggles or safety glasses with side shields, and use a respirator with an organic vapour filter for extended or indoor work.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed — do NOT induce vomiting.\u003c\/strong\u003e Rinse the mouth with water. Immediately call a Poisons Information Centre or doctor and tell them the product is an aspiration hazard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water, holding the eyelids open. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing. Wash with soap and water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Move to fresh air. Seek medical attention if breathing is difficult or irritation persists.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP169\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres (also available in 15 litres)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eReady-to-use solvent-based penetrating impregnating sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWater white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — non-aqueous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eGreater than 24 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e5–10 m²\/L porous; 10–20 m²\/L dense, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e10 °C – 28 °C, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn to traffic\u003c\/td\u003e\n\u003ctd\u003e6 hours. Keep dry 12 hours. Full cure 24–48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpected life\u003c\/td\u003e\n\u003ctd\u003eUp to 5 years; re-apply every 2–3 years in harsh conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eNaphtha, petroleum, isoparaffin, hydrotreated (CAS 64742-48-9) 10–30%; n-butyl acetate (CAS 123-86-4) 10–30%; fluorinated polymer and proprietary silane, each under 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH226, H304, AUH066\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods; packs of 5 litres or less not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloves\u003c\/td\u003e\n\u003ctd\u003eChemical protective, e.g. PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttacks\u003c\/td\u003e\n\u003ctd\u003eRubber, many plastics, resins and some coatings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTesting\u003c\/td\u003e\n\u003ctd\u003eIndependently performance tested by a NATA approved stone laboratory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 15 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-defender-sv-5-ltr\"\u003eActichem Defender SV\u003c\/a\u003e — solvent-based repellent for \u003cstrong\u003eporous\u003c\/strong\u003e stone, masonry and concrete. Different substrate range, and a lower flash point (20 °C).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eActichem Instaseal\u003c\/a\u003e — a water-based alternative. \u003cstrong\u003eNot classified hazardous\u003c\/strong\u003e, and worth considering where solvent vapour or flammability would be a problem, such as enclosed or occupied areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActichem Proneutro\u003c\/strong\u003e — the recommended neutral cleaner for maintaining sealed surfaces. Using acids or strong alkalis on a sealed floor will shorten sealer life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/AP169.05-Solv-Sealer-Pro-15072025.pdf\"\u003eActichem Solv Sealer Pro Safety Data Sheet — version 2.3, issued 15 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf your risk assessment for this product was written from the “Class 3 Flammable” line alone, it does not cover the aspiration hazard and needs to be redone.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSealing indoors, in an occupied building, or unsure whether a solvent or water-based sealer suits the substrate? Contact Carpet Cleaners Warehouse before you order — on some jobs the water-based option is the right answer, and we would rather tell you that up front.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44122346553557,"sku":"AP169.05","price":361.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Solv-Sealer-Pro-5L.jpg?v=1780551501"},{"product_id":"actichem-instastrip-5l","title":"Actichem Instastrip 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eInstastrip is a total floor stripper and coating remover. It is a heavy-duty stripper designed to remove polish build-up, wax, sealers and UHS burnished finishes, for use with powered scrubbing machinery on a wide variety of floor surfaces. It is exceptionally effective even at high dilution, which makes it the economical choice for routine coating removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe key difference between our two strippers:\u003c\/strong\u003e Instastrip is \u003cem\u003esafe on vinyl and most resilient floors\u003c\/em\u003e. \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-powerstrip-5-ltr\"\u003ePower Strip\u003c\/a\u003e is not — it is a solvent stripper for stone, concrete and terrazzo and will damage vinyl and linoleum. Choose by substrate first, strength second.\u003c\/p\u003e\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cp\u003eInstastrip is safe for use on vinyl and most resilient floors, and quickly softens and emulsifies old, worn and discoloured finishes for easy removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstastrip must not be used to remove sealer and polish finishes from sealed timber floors\u003c\/strong\u003e, as it may affect the timber seal and require sanding to rectify the floor.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra low foam\u003c\/strong\u003e — the low-foaming formulation ensures extraction machinery is not damaged by foam entering the vacuum motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast action\u003c\/strong\u003e — begins to liquefy coating immediately on contact with the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabour saving\u003c\/strong\u003e — minimal scrubbing is required, so time and labour are minimised.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e — suitable on vinyl, linoleum and resilient floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow odour\u003c\/strong\u003e — no harsh ammonia fumes or high-VOC solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the SDS before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location.\u003c\/li\u003e\n\u003cli\u003eUse at \u003cstrong\u003e1:10\u003c\/strong\u003e for light build-ups, up to \u003cstrong\u003e1:4\u003c\/strong\u003e for heavy build-up and UHS burnished coatings.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDirections\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSweep the area thoroughly to remove any soiling that could damage the floor if caught under scrubbing equipment.\u003c\/li\u003e\n\u003cli\u003eApply the solution liberally with a cotton mop, ensuring the area is thoroughly wet. Always work in small, controllable areas.\u003c\/li\u003e\n\u003cli\u003eAllow at least 5 minutes dwell time, then agitate with a low-speed rotary scrubber or auto-scrubber fitted with a black, brown or high-productivity pad.\u003c\/li\u003e\n\u003cli\u003eBe careful that the area does not dry out on the surface.\u003c\/li\u003e\n\u003cli\u003eAfter scrubbing, pick up the slurry and rinse thoroughly with clean water so that all stripper and sealer residues are removed.\u003c\/li\u003e\n\u003cli\u003eAllow the floor to dry before proceeding with the restoration process, and re-strip any areas still carrying polish build-up or missed in the first pass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eOur page has always carried “Safety profile: Class 8 Corrosive” and the dangerous-goods shipping note. Both are correct — but a transport class tells you nothing about PPE, first aid or what the product reacts with, and the published pH was understated. The full classification is below.\u003c\/p\u003e\n\u003cp\u003eInstastrip is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH290\u003c\/strong\u003e — may be corrosive to metals\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; Serious Eye Damage Category 1; \u003cstrong\u003eMetal Corrosion Category 1\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2R\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e13 to 14\u003c\/strong\u003e — our page previously said 12\u003c\/li\u003e\n\u003cli\u003eActives: monoethanolamine 10 to less than 30%; ethylene glycol monobutyl ether 10 to less than 30%; sodium hydroxide below 10%\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN1760, Class 8, Packing Group II\u003c\/strong\u003e, proper shipping name “CORROSIVE LIQUID, N.O.S. (contains sodium hydroxide and monoethanolamine)”. Limited quantity 1 litre — \u003cstrong\u003eevery pack size we sell travels as regulated dangerous goods.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e“Low odour” is not the same as low hazard.\u003c\/strong\u003e Instastrip is genuinely more pleasant to use than an ammoniated stripper — that is a real benefit and it is why people like it. It is also caustic soda and ethanolamine at pH 13 to 14. The absence of a smell removes the warning, not the hazard.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies elbow-length butyl or neoprene gloves, chemical goggles, overalls and a PVC apron, with access to an eyewash unit \u003cstrong\u003eand a safety shower\u003c\/strong\u003e. Use warning signage — a wet stripper floor is both slippery and corrosive to anyone who walks onto it.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush the eye continuously with running water for at least 15 minutes. Obtain medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and footwear immediately and flush with large amounts of water. Caustic burns are often painless at first and deepen over minutes — a splash that does not sting still needs flushing and attention.\u003c\/p\u003e\n\u003ch2\u003eMetals, Storage and Mixing\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e“Corrosive to all metals.”\u003c\/strong\u003e That is the SDS wording, and H290 is on the label. Do not decant into or store in metal containers, do not leave the solution standing on metal thresholds, drains, trims or machine frames, and rinse equipment thoroughly after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e“Do not store near acids or oxidising agents.”\u003c\/strong\u003e Never mix, and never allow contact in a bucket, auto-scrubber tank, drain or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eGrout Restore 20\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eTile \u0026amp; Grout Restore\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eCrete Clean\u003c\/a\u003e or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eRust Remover\u003c\/a\u003e — strong acid meeting strong alkali releases heat fast enough to boil and spit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-perox-5-ltr\"\u003eActichem Perox\u003c\/a\u003e and any other oxidiser\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e, \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eMould Exterminator\u003c\/a\u003e, pool chlorine or any hypochlorite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSequencing a strip and an acid restore on the same floor is normal practice and is fine — provided you complete one, pick up the slurry, rinse thoroughly with clean water, and use separate clearly labelled equipment before starting the other.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e13 to 14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:10 light build-up; up to 1:4 heavy build-up and UHS burnished coatings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003eMinimum 5 minutes, kept wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eUltra low — safe for extraction machinery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActives\u003c\/td\u003e\n\u003ctd\u003eMonoethanolamine 10–30%; ethylene glycol monobutyl ether 10–30%; sodium hydroxide \u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314, H290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN1760, Class 8, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for\u003c\/td\u003e\n\u003ctd\u003eVinyl, linoleum and most resilient floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDo not use on\u003c\/td\u003e\n\u003ctd\u003eSealed timber floors; metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAll metals; acids; oxidising agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.4, issued 31 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing Between the Strippers\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instastrip-15-ltr\"\u003eActichem Instastrip 15 Ltr\u003c\/a\u003e — the same product in the bulk pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-powerstrip-5-ltr\"\u003eActichem Power Strip\u003c\/a\u003e — solvent stripper for solvent sealers and burnish build-up on \u003cstrong\u003estone, concrete and terrazzo\u003c\/strong\u003e. \u003cstrong\u003eNot for vinyl or linoleum.\u003c\/strong\u003e DANGER, H314, benzyl alcohol 30–60%.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-solvstrip-5-ltr\"\u003eActichem Solv Strip\u003c\/a\u003e — the mildest of the three. WARNING rather than DANGER, H319 and H335 only, and \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods. Worth trying first where the coating will yield to it.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the low-foam machine cleaner for the maintenance clean after stripping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe short version:\u003c\/strong\u003e vinyl and resilient → Instastrip. Stone, concrete and terrazzo → Power Strip. Light coatings and the lowest hazard → Solv Strip. Sealed timber → none of them.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-Instastrip-AP400.pdf\"\u003eActichem Instastrip Safety Data Sheet — version 2.4, issued 31 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP400.15\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot sure which stripper suits your floor, or whether the existing coating will lift at 1:10? Contact Carpet Cleaners Warehouse before you order. Stripping the wrong floor with the wrong product is an expensive way to find out.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44122346619093,"sku":"AP400.05","price":82.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Instastrip-5L.jpg?v=1780551502"},{"product_id":"actichem-instaseal-5l","title":"Actichem Instaseal 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eInstaseal is a tough, semi-permanent, water-based floor sealer and base coat using thermoplastic technology. It provides a durable surface for interior or exterior applications.\u003c\/p\u003e\n\u003cp\u003eIt is formulated to protect fine stone flooring, terrazzo, terracotta and concrete from foot traffic and trolley wear in busy public areas, and it resists water blotching, scuffing and black heel marks.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e5 litre\u003c\/strong\u003e pack — around 250 to 400 m² per coat. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-15-ltr\"\u003e15 litre\u003c\/a\u003e suits contractors doing floor work at volume.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTenacious bond\u003c\/strong\u003e — bonds to porous surfaces to form a durable, non-slip surface with a low sheen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide surface suitability\u003c\/strong\u003e — marble and fine stone, concrete, terrazzo, slate, pavers and vinyl flooring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase coat\u003c\/strong\u003e — an ideal foundation for high-gloss acrylic finishes such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eInstagloss\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e — prevents powdering and degradation of concrete and stone floors, and dramatically improves the cleanability of porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified non-hazardous\u003c\/strong\u003e — see the safety section below. In a category where the topcoat carries a reproductive toxicity classification, that is worth knowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy seal first?\u003c\/h2\u003e\n\u003cp\u003ePorous stone and concrete drink polish. Building gloss directly on an absorbent substrate takes more coats, costs more, and gives a poorer result because the finish keeps sinking in rather than levelling.\u003c\/p\u003e\n\u003cp\u003eSealing first solves three things at once:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer topcoats.\u003c\/strong\u003e Two coats of Instaseal cuts the Instagloss requirement from 3–5 coats to 2–3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower cost.\u003c\/strong\u003e Sealer is doing the filling; you are not paying gloss-finish prices to fill pores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower exposure.\u003c\/strong\u003e Instagloss is classified \u003cstrong\u003eH360Df, reproductive toxicity\u003c\/strong\u003e. Fewer coats of it means less handling and less time in the space. \u003cstrong\u003eSealing first is a genuine safety improvement, not just a cost one.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eA topical floor sealer and base coat.\u003c\/p\u003e\n\u003ch3\u003eSlip resistance\u003c\/h3\u003e\n\u003cp\u003eInstaseal displays satisfactory slip resistance when tested to the Australian Standards. \u003cstrong\u003eFor large commercial projects, conduct site-specific slip testing\u003c\/strong\u003e to confirm the rating achieved on the actual substrate. Slip resistance is a property of the coating \u003cem\u003eand\u003c\/em\u003e the floor under it, and a commercial client will expect a tested figure rather than an assurance.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use. Always pre-test in an inconspicuous location.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003ePreparation\u003c\/h3\u003e\n\u003cp\u003eStrip off old polish and wax residues with a floor coatings remover. \u003cstrong\u003eRinse thoroughly with clean water and let the floor dry completely.\u003c\/strong\u003e Sealer applied over residue or a damp floor will not bond, and the only fix is to strip it and start again.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eReady to use. Do not dilute.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply \u003cstrong\u003e2 to 4 coats\u003c\/strong\u003e depending on porosity and expected traffic. \u003cstrong\u003eIf it is functioning as a base coat under Instagloss, 2 coats is the figure\u003c\/strong\u003e, followed by 2 to 3 coats of Instagloss.\u003c\/li\u003e\n\u003cli\u003eApply with a clean polish applicator, spreading a thin coat using slightly overlapping strokes.\u003c\/li\u003e\n\u003cli\u003eAllow \u003cstrong\u003e30 to 40 minutes\u003c\/strong\u003e to dry.\u003c\/li\u003e\n\u003cli\u003eApply subsequent coats \u003cstrong\u003eat right angles to the previous coat\u003c\/strong\u003e for even coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstagloss can go on as soon as the Instaseal is touch dry\u003c\/strong\u003e — you do not need to wait out a full cure between the two products.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllow at least 12 hours before returning the floor to normal use.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRepeated thin coats beat one heavy application.\u003c\/strong\u003e Coverage is 50–80 m² per litre per coat depending on porosity.\u003c\/p\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eMaintain the sealed floor with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eProNeutro\u003c\/a\u003e neutral cleaner. On flat, smooth floors a higher sheen can be obtained by buffing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeutral is the operative word.\u003c\/strong\u003e An alkaline cleaner will progressively soften and dull a thermoplastic sealer, which is why floors maintained with general-purpose detergent stop responding to buffing.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eVerified non-hazardous — and we checked.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP420 records Instaseal as a \u003cstrong\u003enon-hazardous chemical and non-dangerous goods.\u003c\/strong\u003e No signal word, no hazard statements, no poisons schedule, pH 7. The sheet states that all ingredients are non-hazardous.\u003c\/p\u003e\n\u003cp\u003eWe are being explicit because we have been correcting a great many pages in this catalogue that claimed “non-hazardous” when the safety data sheet said otherwise — including \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eInstagloss\u003c\/a\u003e, the topcoat that goes over this product. \u003cstrong\u003eThis one is correct.\u003c\/strong\u003e We read the sheet and confirmed it.\u003c\/p\u003e\n\u003ch3\u003eOne caveat we want to be open about\u003c\/h3\u003e\n\u003cp\u003eThe published safety data sheet for AP420 is dated \u003cstrong\u003e2 July 2021\u003c\/strong\u003e — the oldest current sheet we have found anywhere in the Actichem range, where almost everything else carries a 2025 revision. Its composition section also names no ingredients, CAS numbers or percentages at all, only the statement that all ingredients are non-hazardous.\u003c\/p\u003e\n\u003cp\u003eWe have no reason to think the classification is wrong. But it is a four-year-old document with thinner disclosure than the rest of the range, and \u003cstrong\u003ewe have asked Actichem for a current revision.\u003c\/strong\u003e We would rather tell you that than present it as freshly confirmed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP420.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eWater-based thermoplastic floor sealer and base coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eOpaque blue liquid (SDS); white when dried down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e50–80 m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e2–4; 2 when used as a base coat under Instagloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e30–40 minutes between coats; \u003cstrong\u003e12 hours before normal use\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7\u003c\/strong\u003e (Actichem SDS). This listing previously stated 7.5.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNon-hazardous chemical\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eNone — not applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.2, issued 2 July 2021 — see the caveat above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-15-ltr\"\u003eActichem Instaseal 15 litre\u003c\/a\u003e — the same product in the bulk pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eActichem Instagloss\u003c\/a\u003e — the high-gloss topcoat. \u003cstrong\u003eRead its safety section before you order it\u003c\/strong\u003e — it is classified H360Df, reproductive toxicity.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — the neutral cleaner for maintaining sealed floors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202107-Actichem-Instaseal-AP420.pdf\"\u003eActichem Instaseal safety data sheet (AP420, version 2.2, 2 July 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP420.05\u003c\/p\u003e\n\u003cp\u003ePlanning a floor sealing and finishing job and not sure how many coats of each product you need? Tell us the substrate, the area and the traffic. Getting the coat schedule right first time saves both product and a return visit.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44122346651861,"sku":"AP420.05","price":145.81,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Instaseal-5L.jpg?v=1780551502"},{"product_id":"actichem-performance-plus-5l","title":"Actichem Performance Plus 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Performance Plus is a prespray detergent that brings together three things that have historically pulled against each other: \u003cstrong\u003esoil suspension power, anti-resoiling polymer technology, and the formulation requirements for safe wool cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tension is real. Presprays that clean hard have traditionally been alkaline, and alkali damages wool. Performance Plus is built to clean at a wool-safe pH, which is why it has become the reference product in this category.\u003c\/p\u003e\n\u003cp\u003ePerformance Plus is a direct replacement for PowerClean Performance Plus.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e5 litre\u003c\/strong\u003e pack. At 1:32 that makes 165 litres of prespray solution. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-performance-plus-20-ltr\"\u003e20 litre\u003c\/a\u003e suits contractors running wool work regularly.\u003c\/p\u003e\n\u003ch2\u003eCertifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoolSafe approved.\u003c\/strong\u003e Performance Plus exceeds the requirements for the safe cleaning of wool carpeting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you clean wool and you quote for it, this is worth naming to the customer and worth having on file. A wool carpet claim is one of the more expensive things that can go wrong on a job, and using a certified product is a meaningful part of your defence.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoil suspension\u003c\/strong\u003e — penetrates and breaks down grime, oils and soils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolymer anti-resoiling technology\u003c\/strong\u003e — enhances suspended soil removal and leaves the fibre resisting resoiling. On a commercial contract this is what determines how the carpet looks in week six, not week one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWool friendly\u003c\/strong\u003e — exceeds the requirements for safe wool cleaning, and engineered to work on synthetics too.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSafe on fifth-generation nylon.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low VOC profile\u003c\/strong\u003e — no unpleasant vapours even when heated. This is a genuine and useful property; see the note on sensitive areas below.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to apply\u003c\/strong\u003e through pump-up or Hydroforce sprayers, with a fresh lemon fragrance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eHigh-performance cleaning across domestic, commercial and institutional applications.\u003c\/p\u003e\n\u003ch3\u003eSensitive areas — what we can and cannot claim\u003c\/h3\u003e\n\u003cp\u003eThis listing has long recommended Performance Plus for \u003cstrong\u003ehospitals, aged care facilities, childcare centres and homes with asthma sufferers\u003c\/strong\u003e, on the basis of its “excellent safety profile”. We want to be careful and accurate about that, because the two halves of it are not the same claim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat holds up:\u003c\/strong\u003e the ultra-low VOC profile and low odour are real and are exactly the properties that matter in those settings. Fragrance and solvent vapour are what trigger complaints and symptoms in asthma sufferers and in aged care, and a low-VOC prespray is genuinely a better choice there than a solvent-boosted one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does not:\u003c\/strong\u003e low VOC is not the same as non-hazardous. \u003cstrong\u003ePerformance Plus is a classified hazardous chemical\u003c\/strong\u003e — see the safety section below. The \u003cem\u003econcentrate\u003c\/em\u003e needs handling with care regardless of where you are using it.\u003c\/p\u003e\n\u003cp\u003eThe practical position: it remains a sound choice for sensitive environments, and you should still dilute it away from occupants and wear eye protection while doing so.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAlways pre-test in an inconspicuous location\u003c\/strong\u003e for substrate sensitivity.\u003c\/p\u003e\n\u003ch3\u003eDilution — pump-up sprayer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15–30 ml per litre\u003c\/strong\u003e of water (1:64 to 1:32) depending on soil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy soil:\u003c\/strong\u003e up to 50 ml per litre without causing resoiling or fibre damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDilution — Hydroforce\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:9 tip (yellow):\u003c\/strong\u003e add 750 ml to 1.4 L into a 5 L Hydroforce container and fill with water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:32 tip (brown):\u003c\/strong\u003e dilute 1:1 with water, or add directly into the container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVacuum the area thoroughly. \u003cstrong\u003eThis is not a formality\u003c\/strong\u003e — dry soil left in the pile turns into mud when you prespray it, and then has to be extracted rather than vacuumed.\u003c\/li\u003e\n\u003cli\u003ePrespray the solution onto the carpet. \u003cstrong\u003eDo not allow it to dry.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAgitate and allow \u003cstrong\u003e5 to 15 minutes dwell time.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor synthetic carpets\u003c\/strong\u003e, extract using \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-emulsifier-plus-5-ltr\"\u003eEmulsifier Plus\u003c\/a\u003e or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-extracta-pro-10-kg\"\u003eExtracta Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor wool carpets\u003c\/strong\u003e, extract using \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-5-ltr\"\u003eRinse Pro\u003c\/a\u003e. \u003cstrong\u003eThis is the important one.\u003c\/strong\u003e Rinsing wool with an alkaline product undoes the reason you chose a wool-safe prespray in the first place.\u003c\/li\u003e\n\u003cli\u003eAssist drying with air movers if conditions are humid.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety: Non-Hazardous” and described “outstanding low toxicity and OH\u0026amp;S ratings”. That was wrong\u003c\/strong\u003e and has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP452, version 2.4 issued 11 August 2025, classifies Performance Plus as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage (Serious Eye Damage Category 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation (Skin Corrosion\/Irritation Category 2)\u003c\/li\u003e\n\u003cli\u003eNot a dangerous good. No poisons schedule. pH 7.5 — neutral.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H318 — serious eye damage\u003c\/h3\u003e\n\u003cp\u003eThe highest eye classification in the GHS system. \u003cstrong\u003eDamage, not irritation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote that this product is neutral at pH 7.5\u003c\/strong\u003e, which is a useful reminder: \u003cstrong\u003epH is not a proxy for hazard.\u003c\/strong\u003e A neutral product can still carry the most serious eye classification, because surfactants damage the eye by a different mechanism than acids and alkalis do. Technicians who judge risk by pH alone will get this one wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles when decanting, diluting or filling a sprayer.\u003c\/strong\u003e Those are the moments the concentrate is in the air and at chest height. The working solution at 1:32 to 1:64 is a very different proposition — but people are injured by concentrates, not by working solutions.\u003c\/p\u003e\n\u003ch3\u003eA note on the manufacturer’s documentation\u003c\/h3\u003e\n\u003cp\u003eActichem’s sheet assigns \u003cstrong\u003eH318 and Serious Eye Damage Category 1\u003c\/strong\u003e, but gives the signal word as \u003cstrong\u003eWARNING\u003c\/strong\u003e. Under GHS, a Category 1 eye classification normally carries \u003cstrong\u003eDANGER\u003c\/strong\u003e. We have raised the discrepancy with Actichem.\u003c\/p\u003e\n\u003cp\u003eUntil they clarify it, \u003cstrong\u003ewe advise you to work to the stricter reading\u003c\/strong\u003e and treat the concentrate as a serious eye hazard. We would rather tell you this plainly than quietly pick whichever answer is more convenient.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eAvoid \u003cstrong\u003estrong acids and oxidising agents.\u003c\/strong\u003e In practice that means: do not mix Performance Plus with an acid rinse in the same tank — rinse as a separate step, which is the method anyway.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with water and seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Flush with water. Seek medical advice if irritation occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Do not induce vomiting. Give water and contact a Poisons Information Centre.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP452.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eNeutral, WoolSafe-approved prespray detergent with anti-resoiling polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear yellow liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eLemon citrus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:64 to 1:32 pump-up; up to 50 ml\/L heavy soil; Hydroforce rates above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.5\u003c\/strong\u003e — neutral. Our records state 7.0–7.5, consistent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eEDTA tetrasodium salt (CAS 64-02-8); sodium benzoate (CAS 532-32-1); proprietary surfactants. All under 10%.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWoolSafe approved\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eStrong acids and oxidising agents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eActichem states \u003cstrong\u003eWARNING\u003c\/strong\u003e — see the documentation note above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.4, issued 11 August 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-performance-plus-20-ltr\"\u003eActichem Performance Plus 20 litre\u003c\/a\u003e — the same product in the bulk pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rinse-pro-5-ltr\"\u003eActichem Rinse Pro\u003c\/a\u003e — the WoolSafe-approved acid rinse. \u003cstrong\u003eThe correct rinse partner on wool.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-emulsifier-plus-5-ltr\"\u003eActichem Emulsifier Plus\u003c\/a\u003e — the rinse for synthetic carpet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fibre-shield-5-ltr\"\u003eActichem Fibre Shield\u003c\/a\u003e — carpet protector, applied after an acid rinse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202508-Actichem-Performance-Plus-AP452.pdf\"\u003eActichem Performance Plus safety data sheet (AP452, version 2.4, 11 August 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP452.05\u003c\/p\u003e\n\u003cp\u003eSetting up a wool cleaning process, or quoting work in a hospital, aged care or childcare setting? Talk to us. We can help you put together a prespray and rinse combination that is right for the fibre and defensible if anyone asks what you used.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44122346782933,"sku":"AP452.05","price":89.98,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Performance-Plus-5L.jpg?v=1780551503"},{"product_id":"actichem-fabric-shield-5l","title":"Actichem Fabric Shield SV 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eFabric Shield SV is an advanced \u003cstrong\u003esolvent-based\u003c\/strong\u003e fluorochemical polymer protector for spills and stains. It creates a durable, highly repellent property on each fibre, holding spills at the surface long enough to be removed before they cause permanent staining.\u003c\/p\u003e\n\u003cp\u003eThe point of the solvent carrier is what it lets you protect. \u003cstrong\u003eFabric Shield SV is the product for dry-clean-only fabrics\u003c\/strong\u003e — the ones you cannot safely wet with a water-based protector. That is the reason it exists and the reason it is worth the extra handling care set out below.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e5 litre\u003c\/strong\u003e pack — around twelve lounge suites at the stated coverage, and the better buy if you protect regularly. It is still within the pack-size transport exemption noted below. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fabric-shield-sv-1-ltr\"\u003e1 litre\u003c\/a\u003e suits occasional use or a first trial.\u003c\/p\u003e\n\u003ch2\u003eWhich protector do you need?\u003c\/h2\u003e\n\u003cp\u003eCCW carries three Actichem protectors and they are not interchangeable. Choosing correctly the first time saves a callback.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric Shield SV\u003c\/strong\u003e (this product) — \u003cstrong\u003esolvent\u003c\/strong\u003e based, for upholstery and fabrics including \u003cstrong\u003edry-clean-only\u003c\/strong\u003e goods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fabric-shield-rtu-1-ltr\"\u003eFabric Shield RTU\u003c\/a\u003e\u003c\/strong\u003e — \u003cstrong\u003ewater\u003c\/strong\u003e based, for water-cleanable upholstery and fabrics. It also carries specialty acid-dye stain blockers for red cordial spills, which the solvent version does not. \u003cstrong\u003eIf the fabric can safely be wet, RTU is usually the better choice\u003c\/strong\u003e — it is the lower-hazard product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fibre-shield-1-ltr\"\u003eFibre Shield\u003c\/a\u003e\u003c\/strong\u003e — water based, formulated for \u003cstrong\u003enylon and wool carpet\u003c\/strong\u003e rather than upholstery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced protection\u003c\/strong\u003e — fluorochemical polymer technology against water-based stains, oil-based stains and general grime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits dry-clean-only fabrics\u003c\/strong\u003e — the solvent carrier lets you protect goods that cannot be wet out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e — protects against food and beverage spills and hair and body oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakes routine cleaning easier\u003c\/strong\u003e — soil releases more readily at the next wet extraction, so the fabric cleans up better for longer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide usage\u003c\/strong\u003e — drapes, tablecloths and upholstery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDirections for Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAlways pre-test in an inconspicuous location\u003c\/strong\u003e for substrate sensitivity. Ensure the fabric is clean and free of chemical residue before you protect it — a protector locks in whatever is already there. It can be applied to dry or damp fabric.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately \u003cstrong\u003e400 ml per 5 to 7 seater lounge\u003c\/strong\u003e, or per 15 m².\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eReady to use. No mixing required.\u003c\/li\u003e\n\u003cli\u003eSpray from \u003cstrong\u003e25 to 30 cm\u003c\/strong\u003e away using a smooth back-and-forth motion, overlapping slightly. The fabric should be wetted out. \u003cstrong\u003eDo not over-apply.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrush with a soft brush to spread the protector evenly.\u003c\/li\u003e\n\u003cli\u003eAlign the fabric and speed dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSprayer\u003c\/h3\u003e\n\u003cp\u003eUse a \u003cstrong\u003elow-pressure sprayer with a 65015 jet, up to 60 psi\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicate the sprayer to Fabric Shield SV.\u003c\/strong\u003e This has always been on this page, and the safety data sheet explains why: \u003cstrong\u003ethe product dissolves rubber, many plastics, resins and some coatings.\u003c\/strong\u003e Seals, O-rings and wands that live in a water-based protector will not necessarily survive a solvent one, and a sprayer that has been swapped back and forth is the one that fails mid-job on a customer’s lounge. Label it and keep it separate.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003ePlease read this section before your next job. \u003cstrong\u003eThis listing previously carried no safety information at all.\u003c\/strong\u003e That was an omission on our part, and it mattered, because Fabric Shield SV is one of the more tightly classified products in our protector range.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP473, version 2.3 issued 5 September 2025, classifies it as a \u003cstrong\u003ehazardous chemical and a dangerous good\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH304\u003c\/strong\u003e — may be fatal if swallowed and enters airways (Aspiration Hazard Category 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH226\u003c\/strong\u003e — flammable liquid and vapour (Flammable Liquid Category 3)\u003c\/li\u003e\n\u003cli\u003eFlash point \u003cstrong\u003e54 °C\u003c\/strong\u003e | HAZCHEM \u003cstrong\u003e•3Y\u003c\/strong\u003e | Poisons Schedule \u003cstrong\u003e5\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H304 — aspiration hazard\u003c\/h3\u003e\n\u003cp\u003eFabric Shield SV is \u003cstrong\u003eover 60% hydrotreated heavy naphtha\u003c\/strong\u003e. The danger is not poisoning from a large dose; it is that a small amount reaching the lungs causes chemical pneumonitis, which can be fatal and can develop hours later.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever siphon or transfer by mouth\u003c\/strong\u003e, and never decant into an unlabelled drink container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf swallowed, do NOT induce vomiting.\u003c\/strong\u003e Call a Poisons Information Centre or doctor immediately.\u003c\/li\u003e\n\u003cli\u003eSymptoms can be delayed. Seek assessment even if the person seems fine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H226 — flammable, and how flammable\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFlash point 54 °C.\u003c\/strong\u003e That is worth putting in context rather than treating “flammable” as one undifferentiated category:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-defender-sv-5-ltr\"\u003eDefender SV\u003c\/a\u003e flashes at about \u003cstrong\u003e20 °C\u003c\/strong\u003e — at or below normal room temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabric Shield SV flashes at 54 °C\u003c\/strong\u003e — the highest of our solvent group, and above any normal indoor temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn practice that means Fabric Shield SV will not generate a flammable vapour in an air-conditioned lounge room the way a low-flash solvent will. \u003cstrong\u003eIt is still a flammable liquid.\u003c\/strong\u003e A hot car boot, a shed roof space in a Queensland summer, or a van parked in the sun will reach 54 °C. Keep it away from heat, sparks and open flame, do not smoke while using it, and do not store it in a vehicle over summer.\u003c\/p\u003e\n\u003ch3\u003e⚠ What it attacks\u003c\/h3\u003e\n\u003cp\u003eAvoid contact with \u003cstrong\u003ecaustics, strong acids, oxidising agents and nitrates\u003c\/strong\u003e. The product also \u003cstrong\u003edissolves rubber, many plastics, resins and some coatings\u003c\/strong\u003e — see the sprayer note above, and pre-test any painted, coated or plastic trim adjacent to the fabric you are protecting.\u003c\/p\u003e\n\u003ch3\u003eVentilation and personal protective equipment\u003c\/h3\u003e\n\u003cp\u003eWork with good ventilation — this is a sprayed solvent and you will be applying it across a whole lounge suite. Chemical goggles or safety glasses with side shields, and protective clothing. An eyewash unit should be available where the product is decanted.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed — do NOT induce vomiting.\u003c\/strong\u003e Immediately call a Poisons Information Centre or doctor, and tell them the product is an aspiration hazard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water, holding the eyelids open. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing. Wash with soap and water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Remove to fresh air.\u003c\/p\u003e\n\u003ch3\u003eTransport and storage\u003c\/h3\u003e\n\u003cp\u003eFabric Shield SV is a \u003cstrong\u003eclassified dangerous good\u003c\/strong\u003e, but Actichem’s sheet states it is \u003cstrong\u003enot regulated for transport in pack sizes of 5 litres or less\u003c\/strong\u003e. Both pack sizes we carry fall within that exemption, so ordinary freight applies. That exemption covers transport — it does not change how the product should be stored or handled on site.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP473.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eSolvent-based fluorochemical fabric and upholstery protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear water-white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use — do not dilute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eApprox. 400 ml per 5–7 seater lounge, or per 15 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003eNot applicable — non-aqueous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e54 °C\u003c\/strong\u003e (ASTM D-56)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eNaphtha, petroleum, hydrotreated heavy (CAS 64742-48-9) \u003cstrong\u003eover 60%\u003c\/strong\u003e; proprietary ingredient under 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eCaustics, strong acids, oxidising agents, nitrates. Dissolves rubber, many plastics, resins and some coatings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH226, H304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eClassified dangerous goods. \u003cstrong\u003eNot regulated for transport in pack sizes of 5 litres or less.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e•3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eTightly closed, away from heat and ignition sources, out of direct sunlight. Not in a vehicle over summer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 5 September 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fabric-shield-sv-1-ltr\"\u003eActichem Fabric Shield SV 1 litre\u003c\/a\u003e — the same product in the smaller pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fabric-shield-rtu-1-ltr\"\u003eActichem Fabric Shield RTU\u003c\/a\u003e — the water-based equivalent for water-cleanable fabrics, with added acid-dye stain blockers.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fibre-shield-1-ltr\"\u003eActichem Fibre Shield\u003c\/a\u003e — water-based protector for nylon and wool carpet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-defender-sv-5-ltr\"\u003eActichem Defender SV\u003c\/a\u003e — the other solvent product in this group. Flashes near room temperature, so it needs more care than this one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202509-Actichem-Fabric-Shield-SV-AP473.pdf\"\u003eActichem Fabric Shield SV safety data sheet (AP473, version 2.3, 5 September 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP473.05\u003c\/p\u003e\n\u003cp\u003eNot sure whether the fabric in front of you should take the solvent or the water-based protector? Tell us the fibre and the care label and we will help you choose before you order. Protecting a dry-clean-only fabric with the wrong product is not something you can undo.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44122346914005,"sku":"AP473.05","price":351.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Fabric-Shield-SV-5L.jpg?v=1780551505"},{"product_id":"actichem-tile-and-grout-sealer-pro-5l","title":"Actichem Stone Sealer Pro 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Stone Sealer Pro is a premium water-based penetrating sealer for porous stone, masonry and clay products. It uses high-grade fluorochemical polymers carried on penetrants that draw the protection into the substrate rather than leaving a film on top of it.\u003c\/p\u003e\n\u003cp\u003eThe result is a surface that repels both water-borne and oil-borne contaminants while still looking and behaving like bare stone. It does not gloss, it does not darken, and because it is vapour permeable it does not trap moisture in the substrate — which matters a great deal on external paving, sandstone and anything laid over a slab.\u003c\/p\u003e\n\u003cp\u003eIt is genuinely non-hazardous. Actichem's safety data sheet classifies it as a non-hazardous chemical and non-dangerous goods, with no signal word, no hazard statements and no Poisons Schedule. That is unusual in this range and it is one of the reasons this product is easy to specify for occupied buildings.\u003c\/p\u003e\n\u003cp\u003eProduct code AP172. Also listed in this catalogue under its earlier name, Tile \u0026amp; Grout Sealer Pro.\u003c\/p\u003e\n\u003ch2\u003eWhy Professionals Choose It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual protection.\u003c\/strong\u003e Fluorochemical chemistry repels water-borne and oil-borne contamination — food and beverage staining, oil and grease, biological growth such as mould and mildew, efflorescence, pollution and weathering. Most cheaper sealers handle water only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetrating, not film-forming.\u003c\/strong\u003e The protection sits inside the pore structure. There is no coating to scuff, peel, flake or go milky underfoot, and no annual strip-and-recoat cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural appearance.\u003c\/strong\u003e It will not discolour or alter the natural look of recommended substrates. Where a client wants the stone to still look like stone, this is the correct product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVapour permeable.\u003c\/strong\u003e It does not hinder the natural passage of water vapour, so trapped moisture cannot build up behind the sealer and cause spalling or delamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV stable.\u003c\/strong\u003e Suitable for exterior as well as interior work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependently tested.\u003c\/strong\u003e Performance tested by a NATA-accredited laboratory, and meets the VOC requirements of Green Building Council of Australia Green Star Office Design v3 IEQ-13 — which is what allows it to be specified on Green Star projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-hazardous and water based\u003c\/strong\u003e — usable in occupied premises without the solvent management that a solvent-borne sealer demands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended Substrates\u003c\/h2\u003e\n\u003cp\u003eFormulated for medium to high porosity fine stone, clay and cement products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarble, limestone and travertine\u003c\/li\u003e\n\u003cli\u003eSandstone and bluestone\u003c\/li\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eCement and clay pavers\u003c\/li\u003e\n\u003cli\u003eTerracotta, Saltillo and quarry tile\u003c\/li\u003e\n\u003cli\u003eSlate\u003c\/li\u003e\n\u003cli\u003eConcrete and masonry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuitable for interior and exterior applications — fine stone flooring and walls, outdoor sandstone features, patios, walkways, and concrete and clay paving.\u003c\/p\u003e\n\u003ch3\u003eWhere it is not the right product\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDense, low-porosity surfaces.\u003c\/strong\u003e A penetrating sealer needs somewhere to penetrate. Fully vitrified porcelain and polished granite absorb very little, so coverage will be high and the benefit small.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere the client wants a wet look or a gloss.\u003c\/strong\u003e This sealer deliberately does not change the appearance. If enhancement is the brief, this is the wrong product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver an existing coating or wax.\u003c\/strong\u003e A penetrating sealer cannot penetrate through a film. Strip first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the safety data sheet before use. Always pre-test in an inconspicuous area, including for appearance, before sealing a whole floor.\u003c\/p\u003e\n\u003ch3\u003ePreparation\u003c\/h3\u003e\n\u003cp\u003eThe surface must be clean, free of coatings, wax, sealer residue, efflorescence and grout haze, and thoroughly dry. Sealing over contamination locks it in permanently. Where wax or coating removal is needed, Tile \u0026amp; Grout Cream is the stripping product — allow the surface to dry completely afterwards and confirm no solvent residue remains.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply ready to use. Do not dilute.\u003c\/li\u003e\n\u003cli\u003eSaturate the surface using a polish applicator, roller or low-pressure sprayer. Apply one to three coats depending on porosity.\u003c\/li\u003e\n\u003cli\u003eKeep the surface visibly wet for at least one minute so the penetrants can carry the fluoropolymer into the pore structure.\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 10 minutes absorption, then move excess product across the surface with a squeegee to even it out.\u003c\/li\u003e\n\u003cli\u003eWait 20 to 30 minutes between coats.\u003c\/li\u003e\n\u003cli\u003eWipe off residue after 10 minutes with absorbent toweling. Do not allow excess to dry on the surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCuring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep off foot traffic for 12 hours.\u003c\/li\u003e\n\u003cli\u003eKeep the surface dry for 24 hours.\u003c\/li\u003e\n\u003cli\u003eFull cure in 24 to 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlan the job around those numbers. A sealer rained on or walked over at six hours will not perform as tested.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly porous substrates: approximately 5 – 10 m² per litre\u003c\/li\u003e\n\u003cli\u003eDense substrates: approximately 10 – 20 m² per litre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoverage varies widely with porosity, surface texture and application method. Estimate from a test area on the actual substrate rather than from the figures above.\u003c\/p\u003e\n\u003ch2\u003eExpected Life and Maintenance\u003c\/h2\u003e\n\u003cp\u003eActichem currently states protection of up to 7 years. Carpet Cleaners Warehouse has published a figure of up to 5 years for this product for some time, and we are seeking clarification from Actichem on which figure applies to the current formulation. In the meantime, the practical guidance below is what we would give a contractor over the counter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan on re-sealing every 2 to 3 years where harsh conditions exist\u003c\/strong\u003e — external exposure, high traffic, wet areas, commercial kitchens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication method, weather at time of application, traffic, cleaning regime and stone type all affect wear.\u003c\/strong\u003e Two identical floors sealed on the same day can wear very differently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid solvents, strong acids and strong alkalis\u003c\/strong\u003e on a sealed surface. Nothing shortens sealer life faster than aggressive routine cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean with a neutral product.\u003c\/strong\u003e Actichem ProNeutro is the recommended maintenance cleaner. Stone Soap is also suitable for routine work on sealed stone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA simple field test for whether re-sealing is due: drop water on the surface in several places. If it beads and sits, the sealer is working. If it darkens the stone and soaks in within a minute, it is time to re-seal.\u003c\/p\u003e\n\u003ch2\u003eSafety Information\u003c\/h2\u003e\n\u003cp\u003eActichem's safety data sheet, version 2.1 issued 26 April 2021, classifies Stone Sealer Pro as a \u003cstrong\u003enon-hazardous chemical and non-dangerous goods\u003c\/strong\u003e. There is no signal word, no hazard statement, no Poisons Schedule and no dangerous goods classification. Engineering controls are not required.\u003c\/p\u003e\n\u003cp\u003eTwo points are still worth knowing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn a fire, decomposition products include hydrogen fluoride.\u003c\/strong\u003e This follows from the fluorochemical polymer content and is stated in the safety data sheet. It is not a use hazard, but it is relevant to how you store bulk quantities and it is worth knowing if you are ever asked by a building manager or a fire safety consultant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe surface will be slippery while wet during application.\u003c\/strong\u003e Barricade the area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis safety data sheet was issued in 2021 and is the oldest current sheet in Actichem's range. We have asked Actichem to confirm whether a more recent revision exists.\u003c\/p\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing a surface that is not properly dry.\u003c\/strong\u003e This is the most common cause of a failed seal. Residual moisture blocks penetration and can produce a patchy result that is difficult to correct.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing over grout haze or efflorescence.\u003c\/strong\u003e You will lock it in. Deal with it first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLetting excess dry on the surface.\u003c\/strong\u003e Wipe residue after 10 minutes. Dried excess on a low-porosity area can leave a visible sheen or a white bloom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder-applying to save product.\u003c\/strong\u003e A penetrating sealer only protects what it reaches. A thin single coat on high-porosity terracotta is close to no protection at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturning traffic too early.\u003c\/strong\u003e Twelve hours for foot traffic, 24 hours dry, 24 to 48 hours full cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintaining a sealed floor with a strong alkaline or acidic cleaner.\u003c\/strong\u003e It will strip years off the sealer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP172\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAP172.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWater-based penetrating sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive chemistry\u003c\/td\u003e\n\u003ctd\u003eFluorochemical polymers with penetrants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear, water-white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003eMiscible in water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eNot applicable — non-flammable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoiling point\u003c\/td\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e5 – 10 m²\/L porous; 10 – 20 m²\/L dense\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e1 – 3 depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoot traffic\u003c\/td\u003e\n\u003ctd\u003eAfter 12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003e24 – 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification\u003c\/td\u003e\n\u003ctd\u003eNon-hazardous chemical, non-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons Schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC\u003c\/td\u003e\n\u003ctd\u003eVery low — meets Green Star Office Design v3 IEQ-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActichem's safety data sheet does not publish a numerical VOC figure. We have asked for it, since Green Star documentation often requires the measured value rather than a compliance statement.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill it change the look of the stone?\u003c\/h3\u003e\n\u003cp\u003eNo. Stone Sealer Pro is formulated not to discolour or alter the natural appearance of recommended substrates. If you want a wet-look or colour-enhancing result, you need an enhancing sealer, not this one. Pre-test on the actual stone regardless — some very porous, very light materials can take up a slight tone from any sealer.\u003c\/p\u003e\n\u003ch3\u003eHow many coats do I need?\u003c\/h3\u003e\n\u003cp\u003eOne to three, depending on porosity. The surface tells you: keep applying while the substrate is still drinking it in, stop when it stays wet on the surface. Highly porous terracotta and sandstone typically need two to three; dense bluestone and granite typically one.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on a shower or wet area?\u003c\/h3\u003e\n\u003cp\u003eYes. It is vapour permeable, which is important in a wet area — a film-forming sealer over a wet-area substrate can trap moisture behind it. Note that a penetrating sealer resists staining; it is not a waterproofing membrane and does not replace one.\u003c\/p\u003e\n\u003ch3\u003eIs it slippery?\u003c\/h3\u003e\n\u003cp\u003eBecause it penetrates rather than forming a film, it does not add a slip layer of its own the way a coating sealer can. It will not restore or improve slip resistance either. The surface will be slippery while wet during application — barricade it.\u003c\/p\u003e\n\u003ch3\u003eDoes it stop mould on external paving?\u003c\/h3\u003e\n\u003cp\u003eIt resists biological growth by making the surface repellent and reducing the moisture and contamination that growth needs. It is not a biocide and does not kill existing growth. Clean the surface properly first.\u003c\/p\u003e\n\u003ch3\u003eCan I apply it in the sun or on a hot day?\u003c\/h3\u003e\n\u003cp\u003eAvoid it. On a hot substrate the carrier flashes off before the fluoropolymer is drawn in, which gives poor penetration and a surface residue that is hard to remove. Work in the shade, early or late, and on a substrate that is not hot to the touch.\u003c\/p\u003e\n\u003ch3\u003eWhat do I clean a sealed floor with?\u003c\/h3\u003e\n\u003cp\u003eA neutral cleaner. Actichem ProNeutro is the recommended maintenance product, and Stone Soap is suitable for routine work. Avoid solvents, strong acids and strong alkalis — they will shorten sealer life considerably.\u003c\/p\u003e\n\u003ch3\u003eWhy does this product appear under two names?\u003c\/h3\u003e\n\u003cp\u003eActichem previously marketed AP172 as Tile \u0026amp; Grout Sealer Pro and now markets it as Stone Sealer Pro. It is the same product code and the same formulation. Older safety data sheets and technical literature carry the earlier name.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — the recommended neutral maintenance cleaner for sealed surfaces. Using it is the single biggest thing a client can do to make the seal last.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-stone-soap-5-ltr\"\u003eActichem Stone Soap\u003c\/a\u003e — routine cleaning of sealed natural stone.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-and-grout-cream-5l\"\u003eActichem Tile \u0026amp; Grout Cream\u003c\/a\u003e — the stripping product for wax, coatings and grout haze before sealing. \u003cstrong\u003eClassified DANGER — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-pre-seal-5-ltr\"\u003eActichem Pre-Seal\u003c\/a\u003e — surface preparation ahead of sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-15-ltr\"\u003eActichem Instaseal\u003c\/a\u003e — the alternative where a different sealing approach suits the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStone Sealer Pro replaces PowerClean Sealer Pro in this catalogue.\u003c\/p\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eStone Sealer Pro is the sealer to specify when the brief is long-term stain protection with no change to the appearance of the stone, on a job where solvent management would be a problem. It is water based, non-hazardous, vapour permeable, UV stable, NATA performance tested and Green Star compliant on VOC — a combination that is hard to find in a sealer that also repels oil.\u003c\/p\u003e\n\u003cp\u003eThe result depends almost entirely on preparation and cure time. A clean, dry, fully stripped substrate, enough product to properly saturate the pore structure, excess wiped back, and the full 24 to 48 hours to cure will give years of service. Anything less will not, regardless of how good the chemistry is.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/AP172_Tile__Grout_Sealer_Pro_SDS_2021_26042021.pdf\"\u003eActichem Stone Sealer Pro (T\u0026amp;G Sealer Pro) Safety Data Sheet — version 2.1, issued 26 April 2021\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP172.05\u003c\/p\u003e\n\u003cp\u003eNot sure whether a penetrating sealer or an enhancing sealer suits the stone in front of you, or how much product the job will take? Contact Carpet Cleaners Warehouse before you order. Getting the sealer choice right the first time is far cheaper than stripping a floor that has been sealed with the wrong product.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44123129184469,"sku":"AP172.05","price":350.68,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Stone-Sealer-Pro-5L.jpg?v=1780551506"},{"product_id":"actichem-instagloss-5l","title":"Actichem Instagloss 5L","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eInstagloss is a high-gloss acrylic polymer floor polish. It blends durability and hardness for traffic, black heel mark resistance, and wet-look repairability.\u003c\/p\u003e\n\u003cp\u003eIt is easy to apply and dries to an instant brilliant gloss, which suits institutions, medical facilities, offices, homes, retail outlets and similar. Its levelling properties are good enough that it can be used as a \u003cstrong\u003esingle-step finish\u003c\/strong\u003e, without a base sealer. The high solids content builds quickly, so fewer coats reach the required gloss and protection.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e5 litre\u003c\/strong\u003e pack — around 250 to 400 m² per coat. The \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-15-ltr\"\u003e15 litre\u003c\/a\u003e suits contractors doing floor work at volume.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrilliant wet-look gloss\u003c\/strong\u003e from the first application of two or more coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent repairability\u003c\/strong\u003e — responds well to cleaning and buffing programs, and revives to a deep shine when buffed or burnished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating performance\u003c\/strong\u003e — durability and resistance to traffic marks, black heel marks and scuffing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlip resistance\u003c\/strong\u003e — conforms with the \u003cstrong\u003eAS\/NZS 4586:2004\u003c\/strong\u003e slip resistance classification of new pedestrian surface materials, wet and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber floors\u003c\/strong\u003e — provides a durable protective coating that enhances the natural grain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable for vinyl, linoleum, slate, terrazzo, terracotta, marble and granite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn stone surfaces and polished concrete, apply a base coat of \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eInstaseal\u003c\/a\u003e first.\u003c\/strong\u003e Porous stone will drink polish, and sealing first is both cheaper and gives a better finish than trying to build gloss directly on an absorbent substrate.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use\u003c\/strong\u003e — see the safety section below, which has changed substantially. \u003cstrong\u003eAlways pre-test in an inconspicuous location.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003ePreparation\u003c\/h3\u003e\n\u003cp\u003eStrip off old polish and wax residues with a floor coatings remover. \u003cstrong\u003eRinse the floor thoroughly with clean water and let it dry completely.\u003c\/strong\u003e Polish applied over residue or damp floor will cloud, and the only fix is to strip it and start again.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eReady to use. Do not dilute.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply \u003cstrong\u003e3 to 5 coats\u003c\/strong\u003e depending on the porosity of the surface and expected traffic. \u003cstrong\u003eIf Instaseal has been used as a base coat, 2 to 3 coats will do\u003c\/strong\u003e — and Instagloss can go on as soon as the Instaseal is touch dry.\u003c\/li\u003e\n\u003cli\u003eApply with a clean polish applicator, spreading a thin coat using slightly overlapping strokes.\u003c\/li\u003e\n\u003cli\u003eAllow \u003cstrong\u003e30 to 40 minutes\u003c\/strong\u003e to dry.\u003c\/li\u003e\n\u003cli\u003eApply each subsequent coat \u003cstrong\u003eat right angles to the previous coat.\u003c\/strong\u003e This is what gives even coverage — applying every coat in the same direction builds ridges you will see under lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow at least 12 hours before returning the floor to normal use.\u003c\/strong\u003e Polish that is dry to touch is not yet cured; putting traffic on it early is the most common cause of early failure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRepeated thin, evenly spread coats beat one heavy application.\u003c\/strong\u003e A heavy coat skins over on top while still soft underneath, and that is what produces the soft, marking finish people blame on the product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 50–80 m² per litre per coat, depending on porosity.\u003c\/p\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eMaintain the finish with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eProNeutro\u003c\/a\u003e neutral cleaner. \u003cstrong\u003eNeutral is the operative word\u003c\/strong\u003e — an alkaline cleaner will progressively soften and dull an acrylic polish, which is why floors maintained with general-purpose detergent stop responding to buffing.\u003c\/p\u003e\n\u003cp\u003eBuff regularly with a white, grey or red pad using an electric or battery polishing machine capable of 150 to 1000 rpm.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section before your next job. This listing previously recorded “Safety profile: Non-hazardous”. That was seriously wrong\u003c\/strong\u003e, and this is one of the most significant corrections we have made across our whole range.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP422, version 2.4 issued 5 August 2025, classifies Instagloss as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH360Df\u003c\/strong\u003e — \u003cstrong\u003emay damage the unborn child. Suspected of damaging fertility.\u003c\/strong\u003e (Reproductive Toxicity Category 1B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317\u003c\/strong\u003e — may cause an allergic skin reaction (Skin Sensitiser Category 1B)\u003c\/li\u003e\n\u003cli\u003eNot a dangerous good. No poisons schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H360Df — reproductive toxicity\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the most serious class of hazard statement in the GHS system, and it needs to be read properly rather than skimmed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eH360Df is not an irritation warning. It says the product \u003cstrong\u003emay damage an unborn child\u003c\/strong\u003e, and is \u003cstrong\u003esuspected of damaging fertility\u003c\/strong\u003e. The driver is \u003cstrong\u003edibutyl phthalate\u003c\/strong\u003e (CAS 84-74-2) at under 10% — a plasticiser that is restricted or being phased out in a number of product categories internationally for exactly this reason.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat this means practically:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnyone who is pregnant, may become pregnant, or is trying to conceive should not apply this product.\u003c\/strong\u003e That applies to the applicator and to anyone else in the area while it is being applied and drying. This is a conversation worth having with your team rather than assuming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate the area properly during application and drying.\u003c\/strong\u003e You are coating a whole floor, so the exposed surface area is large and the exposure period is hours, not minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the area clear of occupants during application and the drying period.\u003c\/strong\u003e In a medical facility, a childcare centre, an aged care home or a residence, plan the job around that requirement rather than working around people.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not eat, drink or smoke while applying.\u003c\/strong\u003e Wash before breaks and at the end of the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe are being direct about this because “non-hazardous” on this page may have led people to apply it without ventilation, with others present, or while pregnant.\u003c\/strong\u003e We are sorry. If that describes a job you have done, the sensible step is to speak to a doctor rather than worry about it privately.\u003c\/p\u003e\n\u003ch3\u003e⚠ H317 — skin sensitisation\u003c\/h3\u003e\n\u003cp\u003eSensitisation is cumulative and permanent. \u003cstrong\u003eOnce you are sensitised, you stay sensitised\u003c\/strong\u003e, and thereafter even brief contact can trigger dermatitis. Floor applicators who lay polish week after week are the exposure group this catches. Keep it off your skin as routine, not as a reaction to a rash.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eAvoid \u003cstrong\u003estrong acids, strong oxidisers, permanganates, nitrates, oxidising agents and chlorine bleaches.\u003c\/strong\u003e In practice: do not strip a floor with a chlorine product and then coat over it without a thorough rinse.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Rinse with water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and flush with water. \u003cstrong\u003eIf a rash develops, stop using the product\u003c\/strong\u003e and seek medical advice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Remove to fresh air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Give water and contact a Poisons Information Centre.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP422.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHigh-gloss acrylic polymer floor polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eOpaque white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e50–80 m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e3–5, or 2–3 over an Instaseal base coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying\u003c\/td\u003e\n\u003ctd\u003e30–40 minutes between coats; \u003cstrong\u003e12 hours before normal use\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.5\u003c\/strong\u003e (Actichem SDS). This listing previously stated 7.5; we have asked Actichem to confirm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eEthylene\/acrylic acid copolymer (CAS 9010-77-9) 30–60%; \u003cstrong\u003edibutyl phthalate (CAS 84-74-2) under 10%\u003c\/strong\u003e; tris(2-butoxyethyl) phosphate (CAS 78-51-3) under 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlip resistance\u003c\/td\u003e\n\u003ctd\u003eConforms with AS\/NZS 4586:2004, wet and dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eStrong acids, strong oxidisers, permanganates, nitrates, oxidising agents, chlorine bleaches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eH360Df\u003c\/strong\u003e, H317\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.4, issued 5 August 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-15-ltr\"\u003eActichem Instagloss 15 litre\u003c\/a\u003e — the same product in the bulk pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eActichem Instaseal\u003c\/a\u003e — the base sealer. Verified \u003cstrong\u003enon-hazardous\u003c\/strong\u003e. Using it reduces the number of Instagloss coats needed, which reduces both cost and exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro\u003c\/a\u003e — the neutral cleaner for maintaining the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202508-Actichem-Instagloss-AP422.pdf\"\u003eActichem Instagloss safety data sheet (AP422, version 2.4, 5 August 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP422.05\u003c\/p\u003e\n\u003cp\u003eIf the reproductive toxicity classification is a problem for your team or your site — and in a childcare, medical or aged care setting it reasonably might be — talk to us. We would rather help you find an appropriate alternative than sell you something you should not be using.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44140300763349,"sku":"AP422.05","price":127.11,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Instagloss-5L.jpg?v=1780551507"},{"product_id":"actichem-proneutro-1-ltr","title":"Actichem Proneutro 1 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem ProNeutro is a neutral-pH detergent cleaner designed to remove soil from \u003cstrong\u003epH-sensitive surfaces\u003c\/strong\u003e — fine stone and polymer-coated flooring in particular.\u003c\/p\u003e\n\u003cp\u003eIt uses nanosurfactant technology to deliver cleaning performance at neutral pH while leaving no haziness, streaking or slippery residue. It has become a default maintenance cleaner for a lot of contractors, and the economics are a large part of why.\u003c\/p\u003e\n\u003ch3\u003eWhich pack size do you need?\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e1 litre\u003c\/strong\u003e pack — the right size for trialling ProNeutro or for a single small site. Even at this size it makes up to 400 litres of working solution at autoscrubber dilution. For an ongoing maintenance contract the \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003e5 litre\u003c\/a\u003e or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-15-ltr\"\u003e15 litre\u003c\/a\u003e is far better value per litre of solution.\u003c\/p\u003e\n\u003ch2\u003eWhy neutral pH matters\u003c\/h2\u003e\n\u003cp\u003eThis is the whole point of the product and it is worth being clear about.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcrylic and thermoplastic floor finishes are softened by alkali.\u003c\/strong\u003e A floor coated with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eInstagloss\u003c\/a\u003e or sealed with \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eInstaseal\u003c\/a\u003e and then maintained with general-purpose alkaline detergent will progressively dull, stop responding to buffing, and eventually need stripping and recoating years early. \u003cstrong\u003eThe finish did not fail; the maintenance regime destroyed it.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarble, limestone and travertine are calcium carbonate\u003c\/strong\u003e and are etched by acids. Neutral cleaning is the only safe routine option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber floors\u003c\/strong\u003e are damaged by both extremes and by excess water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you have specified and laid a floor finish, \u003cstrong\u003especifying the maintenance cleaner is part of the job.\u003c\/strong\u003e The most common reason a contractor gets called back to a dulled floor is that the cleaning staff have been using whatever was in the store cupboard.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuinely economical\u003c\/strong\u003e — dilutes to remarkably low rates. See the dilution note below, which is where the real saving is.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast on oily soil\u003c\/strong\u003e — nanosurfactant technology emulsifies oily soil and grime quickly, which suits autoscrubber work where dwell time is measured in seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum residue\u003c\/strong\u003e — no streaks, haziness or slippery residue. That matters on highly polished flooring, and residue that builds up is itself a slip hazard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate safe\u003c\/strong\u003e — fine natural stone, marble, polymer-coated flooring, timber floors and pH-sensitive surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot classified as hazardous\u003c\/strong\u003e — see the safety section. Genuinely relevant where cleaning staff rather than trained technicians will be using it daily.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eMaintenance and medium-duty cleaning of granite, marble, limestone, engineered stone, acrylic polymer-coated flooring, timber flooring and other pH-sensitive surfaces.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use. Always pre-test the cleaning solution\u003c\/strong\u003e on the surface to be cleaned.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor and general cleaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5–10 ml per litre (1:200 to 1:100), by cloth or mop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAutoscrubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAs low as \u003cstrong\u003e1:400\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStain removal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUndiluted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTake the dilution rates seriously.\u003c\/strong\u003e At 1:400 through an autoscrubber, one litre makes 400 litres of working solution. Cleaning staff routinely over-dose because more looks like it should clean better. With a minimum-residue product it does the opposite: excess surfactant is exactly what leaves the film and streaking the product is designed to avoid. \u003cstrong\u003eUse a dosing system or pre-marked measures rather than a free pour.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution with a clean cloth or mop, or through an autoscrubber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinsing is not generally required\u003c\/strong\u003e unless you have used a strong dilution. That is the residue technology doing its job, and it is what makes it practical for daily maintenance.\u003c\/li\u003e\n\u003cli\u003eKeep the container closed for maximum performance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eVerified non-hazardous — and we checked.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for AP662, version 2.2 issued 13 October 2025, records ProNeutro as a \u003cstrong\u003enon-hazardous chemical and non-dangerous goods.\u003c\/strong\u003e No signal word, no hazard statements, no poisons schedule, no GHS classification. pH 7–8. The sheet states all ingredients are non-hazardous.\u003c\/p\u003e\n\u003cp\u003eWe are being explicit because we have been correcting a great many pages in this catalogue that claimed “non-hazardous” when the safety data sheet said otherwise. \u003cstrong\u003eThis one is correct.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne wording change.\u003c\/strong\u003e This listing previously described ProNeutro as having a “totally non-toxic hazard rating”. We have changed that to “not classified as hazardous”, which is what the safety data sheet actually supports. \u003cstrong\u003eNon-hazardous and non-toxic are not the same statement\u003c\/strong\u003e, and we would rather say precisely what has been assessed than something broader that sounds better.\u003c\/p\u003e\n\u003cp\u003ePractically: keep it out of your eyes, and do not drink it. Beyond that it is one of the gentlest products in our range, which is exactly why it suits daily use by general cleaning staff.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Do NOT induce vomiting. Seek medical advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP662.01C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e1 litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eNeutral-pH maintenance detergent for pH-sensitive surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear pink liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eCitrus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:100 to 1:200 general; up to 1:400 autoscrubber; undiluted for stains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7 – 8\u003c\/strong\u003e — neutral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNon-hazardous chemical\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eNone — not applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.2, issued 13 October 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eActichem ProNeutro 5 litre\u003c\/a\u003e — the standard contract pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-15-ltr\"\u003eActichem ProNeutro 15 litre\u003c\/a\u003e — the bulk pack for multi-site contracts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instaseal-5l\"\u003eActichem Instaseal\u003c\/a\u003e — floor sealer and base coat. ProNeutro is the correct maintenance cleaner for sealed floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-instagloss-5l\"\u003eActichem Instagloss\u003c\/a\u003e — high-gloss floor finish. ProNeutro is the correct maintenance cleaner for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202510-Actichem-Proneutro-AP662.pdf\"\u003eActichem ProNeutro safety data sheet (AP662, version 2.2, 13 October 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP662.01C\u003c\/p\u003e\n\u003cp\u003eHanding a sealed or polished floor over to a client’s in-house cleaning staff? Talk to us about setting up a dosing system and a written maintenance regime. It is the single most effective way to make a floor finish last the time you told the client it would.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"1LTR","offer_id":44245718073557,"sku":"AP662.01C","price":28.93,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/Actichem-Proneutro-1-ltr.jpg?v=1780551509"},{"product_id":"actichem-system-7-disc-pad-400mm-16","title":"Actichem System 7 Disc Pad 400mm - 16\"","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Actichem System 7 is a hard floor cleaning system built around a pad with a profiled, multi-material structure that pulls soil out of the pore rather than polishing across the top of it. This is the \u003cstrong\u003eDisc Pad 400 mm (16\")\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt exists to solve a specific and very common problem. Mineral hard floors go grey and unsightly over years, not from surface dirt but from soil and detergent residue built up deep in the surface texture. That build-up survives strong chemicals and it survives abrasive floor pads, because neither reaches into the pore. A conventional pad polishes the top of the soil; System 7 lifts it out.\u003c\/p\u003e\n\u003cp\u003eThe pads are used with Actichem's hard floor chemistry — principally Tile \u0026amp; Grout Cleaner LF for general floor work, and Fire Fix or Fire Restore for fire and smoke restoration.\u003c\/p\u003e\n\u003ch2\u003eWhere It Is Used\u003c\/h2\u003e\n\u003ch3\u003eGeneral hard floor cleaning\u003c\/h3\u003e\n\u003cp\u003eRetail centres, industrial workshops, banks, offices, hospitals, airports — anywhere with heavy foot traffic and mineral hard flooring. The dirt shows worst in high-traffic paths and around entries, and it is the kind of greying that clients assume is permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe larger the area, the stronger the case for System 7.\u003c\/strong\u003e The economics come from covering ground quickly with a pad that keeps working rather than clogging.\u003c\/p\u003e\n\u003ch3\u003eFire and smoke restoration\u003c\/h3\u003e\n\u003cp\u003eThis is where the pads earn their reputation, and it is a significant advance on traditional dry chemical sponges.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey rinse out and are reused,\u003c\/strong\u003e again and again. A soot sponge loads up, gets trimmed back and is eventually thrown away. A System 7 pad is rinsed and returned to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaired with Fire Restore or Fire Fix\u003c\/strong\u003e they form a genuinely effective soot and smoke residue removal system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMany restoration contractors report eliminating the need to repaint some walls entirely\u003c\/strong\u003e using the System 7 pad and Fire Restore combination — which changes the economics of a fire job substantially.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfiled multi-material structure.\u003c\/strong\u003e The combination of materials and the profile of the pad face are what produce the dirt-pulling effect. It is not an abrasive that grinds the surface; it is a structure that grips soil and carries it away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge soil capacity.\u003c\/strong\u003e The pad holds what it lifts instead of pushing it around, which is why the floor comes up clean rather than uniformly grey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-pore action.\u003c\/strong\u003e It reaches into the surface texture that conventional pads skim over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear resistant on structured tile.\u003c\/strong\u003e Textured and structured tiles destroy ordinary pads. This material stays intact on them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinsable and reusable.\u003c\/strong\u003e Both a cost and a waste advantage.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUp to 10,000 m² per set of pads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoosing the Right Size\u003c\/h2\u003e\n\u003cp\u003eThe disc pads fit standard rotary and single-disc floor machines. Match the pad to the machine's stated pad size, not to the machine's overall footprint.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePad\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eImperial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical use\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003e203 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 inch\u003c\/td\u003e\n\u003ctd\u003eSmall rotary machines, restrooms, confined areas, edge work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003e400 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003ctd\u003eThe common commercial size — the standard choice for most single-disc machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003e425 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e17 inch\u003c\/td\u003e\n\u003ctd\u003eLarger machines and open-floor commercial work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003e115 × 250 mm hand pad\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eWalls, vertical surfaces, detail work, edges, stairs and all fire restoration wall work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMost operators need two.\u003c\/strong\u003e A disc pad matched to the machine for the floor area, and hand pads for the edges, corners and anything vertical. On fire restoration work the hand pad does the majority of the job, because most soot damage is on walls and ceilings rather than floors.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFit the disc pad to the machine's driver, or take the hand pad in hand for wall and detail work.\u003c\/li\u003e\n\u003cli\u003eApply the appropriate chemical — Tile \u0026amp; Grout Cleaner LF for general floor soil, Fire Fix or Fire Restore for smoke and soot residue.\u003c\/li\u003e\n\u003cli\u003eWork the surface. Let the pad structure do the work rather than forcing it; the dirt-pulling effect comes from the profile, not from pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse the pad out when it loads up\u003c\/strong\u003e and return it to work. A loaded pad stops lifting and starts smearing — rinsing is what keeps it cutting.\u003c\/li\u003e\n\u003cli\u003eExtract or mop up the released soil rather than letting it dry back onto the floor.\u003c\/li\u003e\n\u003cli\u003eRinse the pads thoroughly at the end of the job and allow them to dry before storage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking with a loaded pad.\u003c\/strong\u003e The single most common error. Once the pad is full it redistributes soil instead of lifting it, and the operator concludes the system does not work. Rinse it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing more pressure instead of rinsing.\u003c\/strong\u003e Pressure does not restore a loaded pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaving released soil to dry on the floor.\u003c\/strong\u003e Lift it before it re-deposits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring pads wet and dirty.\u003c\/strong\u003e Rinse and dry them; they are a reusable asset, not a consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrdering the wrong disc size.\u003c\/strong\u003e Check the machine's pad size — 400 mm and 425 mm look similar on a shelf and only one will fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuying only disc pads for a fire job.\u003c\/strong\u003e Most of that work is vertical. You need hand pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem System 7 Disc Pad 400 mm (16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eS7PAD400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e400 mm diameter disc (16 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eProfiled multi-material structure with dirt-pulling action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReusable\u003c\/td\u003e\n\u003ctd\u003eYes — rinse out and reuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 m² per set of pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability\u003c\/td\u003e\n\u003ctd\u003eTear resistant, including on structured tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable sizes in the range\u003c\/td\u003e\n\u003ctd\u003e203 mm, 400 mm, 425 mm and hand pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended chemistry\u003c\/td\u003e\n\u003ctd\u003eTile \u0026amp; Grout Cleaner LF; Fire Fix and Fire Restore for restoration work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSystem 7 pads are cleaning accessories, not chemicals. No safety data sheet applies to the pad itself — but the chemicals used with it do carry classifications, and those are on the product pages linked below.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is this different from an ordinary floor pad?\u003c\/h3\u003e\n\u003cp\u003eAn ordinary pad is an abrasive that works on the surface — it cuts the top and polishes what is left. System 7's profiled multi-material structure reaches into the pore and pulls soil out, and holds it. On a floor that has gone grey from years of detergent and soil build-up, that difference is the whole result.\u003c\/p\u003e\n\u003ch3\u003eHow many times can I reuse a pad?\u003c\/h3\u003e\n\u003cp\u003eActichem states up to 10,000 m² per set. Actual life depends on the surface — structured and textured tile is harder on any pad — and on whether the pads are rinsed properly and dried before storage. Treat them as equipment rather than consumables and they will earn their cost several times over.\u003c\/p\u003e\n\u003ch3\u003eDo they really replace soot sponges on a fire job?\u003c\/h3\u003e\n\u003cp\u003eThey do the same job and then keep going. A dry chemical sponge loads with soot, gets trimmed back, and is eventually discarded. A System 7 pad is rinsed and returned to work. Restoration contractors using the pads with Fire Restore report eliminating repainting on some walls, which is a far larger saving than the pads themselves.\u003c\/p\u003e\n\u003ch3\u003eWhich chemical should I use with them?\u003c\/h3\u003e\n\u003cp\u003eTile \u0026amp; Grout Cleaner LF for general hard floor cleaning. Fire Fix or Fire Restore for smoke and soot residue. Read the classification on each of those product pages before use — Fire Restore in particular is a corrosive product and its dangerous goods exemption does not make it safe to handle casually.\u003c\/p\u003e\n\u003ch3\u003eWill they damage the floor?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to lift soil rather than abrade the surface, so they are gentler on a finish than an aggressive abrasive pad. Pre-test on polished and sensitive surfaces as you would with any pad and any chemistry.\u003c\/p\u003e\n\u003ch3\u003eCan I use them on textured or structured tile?\u003c\/h3\u003e\n\u003cp\u003eYes — this is one of their strengths. Structured tile shreds ordinary pads. The System 7 material stays tear resistant on it, and the profiled face reaches into the texture where the soil actually is.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my machine?\u003c\/h3\u003e\n\u003cp\u003eMatch the pad to the machine's stated pad size. 400 mm is 16 inch and 425 mm is 17 inch, and they are not interchangeable. If you are unsure, tell us the machine model and we will confirm before you order.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003eSystem 7 Hand Pad 115 × 250 mm\u003c\/a\u003e — walls, edges and detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003eSystem 7 Disc Pad 203 mm (8\")\u003c\/a\u003e — small machines and confined areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003eSystem 7 Disc Pad 425 mm (17\")\u003c\/a\u003e — larger machines and open floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the hard floor chemistry the system is built around.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eActichem Fire Restore\u003c\/a\u003e — smoke and soot residue removal. \u003cstrong\u003eClassified corrosive — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — fire and smoke restoration cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe System 7 pad solves a problem most operators have written off as permanent: mineral hard floors that have gone grey from years of soil and detergent build-up deep in the surface, where strong chemicals and abrasive pads cannot reach.\u003c\/p\u003e\n\u003cp\u003eIt is also, in fire restoration, a genuine improvement on the traditional soot sponge — because it rinses out and keeps working, and because combined with Fire Restore it has taken repainting off the scope of work on jobs where that would once have been unavoidable.\u003c\/p\u003e\n\u003cp\u003eRinse it when it loads up, dry it before storage, and match the disc size to your machine. Used that way a set will cover up to 10,000 m².\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: S7PAD400\u003c\/p\u003e\n\u003cp\u003eNot sure which pad size fits your machine, or whether System 7 will lift the greying on a particular floor? Contact Carpet Cleaners Warehouse before you order — tell us the machine model and the floor type and we will confirm.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"EACH","offer_id":44251959525589,"sku":"S7PAD400","price":89.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-System-7-Disc-Pad-400mm-16.jpg?v=1780551510"},{"product_id":"actichem-system-7-disc-pad-425mm-17","title":"Actichem System 7 Disc Pad 425mm - 17\"","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Actichem System 7 is a hard floor cleaning system built around a pad with a profiled, multi-material structure that pulls soil out of the pore rather than polishing across the top of it. This is the \u003cstrong\u003eDisc Pad 425 mm (17\")\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt exists to solve a specific and very common problem. Mineral hard floors go grey and unsightly over years, not from surface dirt but from soil and detergent residue built up deep in the surface texture. That build-up survives strong chemicals and it survives abrasive floor pads, because neither reaches into the pore. A conventional pad polishes the top of the soil; System 7 lifts it out.\u003c\/p\u003e\n\u003cp\u003eThe pads are used with Actichem's hard floor chemistry — principally Tile \u0026amp; Grout Cleaner LF for general floor work, and Fire Fix or Fire Restore for fire and smoke restoration.\u003c\/p\u003e\n\u003ch2\u003eWhere It Is Used\u003c\/h2\u003e\n\u003ch3\u003eGeneral hard floor cleaning\u003c\/h3\u003e\n\u003cp\u003eRetail centres, industrial workshops, banks, offices, hospitals, airports — anywhere with heavy foot traffic and mineral hard flooring. The dirt shows worst in high-traffic paths and around entries, and it is the kind of greying that clients assume is permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe larger the area, the stronger the case for System 7.\u003c\/strong\u003e The economics come from covering ground quickly with a pad that keeps working rather than clogging.\u003c\/p\u003e\n\u003ch3\u003eFire and smoke restoration\u003c\/h3\u003e\n\u003cp\u003eThis is where the pads earn their reputation, and it is a significant advance on traditional dry chemical sponges.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey rinse out and are reused,\u003c\/strong\u003e again and again. A soot sponge loads up, gets trimmed back and is eventually thrown away. A System 7 pad is rinsed and returned to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaired with Fire Restore or Fire Fix\u003c\/strong\u003e they form a genuinely effective soot and smoke residue removal system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMany restoration contractors report eliminating the need to repaint some walls entirely\u003c\/strong\u003e using the System 7 pad and Fire Restore combination — which changes the economics of a fire job substantially.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfiled multi-material structure.\u003c\/strong\u003e The combination of materials and the profile of the pad face are what produce the dirt-pulling effect. It is not an abrasive that grinds the surface; it is a structure that grips soil and carries it away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge soil capacity.\u003c\/strong\u003e The pad holds what it lifts instead of pushing it around, which is why the floor comes up clean rather than uniformly grey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-pore action.\u003c\/strong\u003e It reaches into the surface texture that conventional pads skim over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear resistant on structured tile.\u003c\/strong\u003e Textured and structured tiles destroy ordinary pads. This material stays intact on them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinsable and reusable.\u003c\/strong\u003e Both a cost and a waste advantage.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUp to 10,000 m² per set of pads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoosing the Right Size\u003c\/h2\u003e\n\u003cp\u003eThe disc pads fit standard rotary and single-disc floor machines. Match the pad to the machine's stated pad size, not to the machine's overall footprint.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePad\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eImperial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical use\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003e203 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 inch\u003c\/td\u003e\n\u003ctd\u003eSmall rotary machines, restrooms, confined areas, edge work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003e400 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003ctd\u003eThe common commercial size — the standard choice for most single-disc machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003e425 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e17 inch\u003c\/td\u003e\n\u003ctd\u003eLarger machines and open-floor commercial work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003e115 × 250 mm hand pad\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eWalls, vertical surfaces, detail work, edges, stairs and all fire restoration wall work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMost operators need two.\u003c\/strong\u003e A disc pad matched to the machine for the floor area, and hand pads for the edges, corners and anything vertical. On fire restoration work the hand pad does the majority of the job, because most soot damage is on walls and ceilings rather than floors.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFit the disc pad to the machine's driver, or take the hand pad in hand for wall and detail work.\u003c\/li\u003e\n\u003cli\u003eApply the appropriate chemical — Tile \u0026amp; Grout Cleaner LF for general floor soil, Fire Fix or Fire Restore for smoke and soot residue.\u003c\/li\u003e\n\u003cli\u003eWork the surface. Let the pad structure do the work rather than forcing it; the dirt-pulling effect comes from the profile, not from pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse the pad out when it loads up\u003c\/strong\u003e and return it to work. A loaded pad stops lifting and starts smearing — rinsing is what keeps it cutting.\u003c\/li\u003e\n\u003cli\u003eExtract or mop up the released soil rather than letting it dry back onto the floor.\u003c\/li\u003e\n\u003cli\u003eRinse the pads thoroughly at the end of the job and allow them to dry before storage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking with a loaded pad.\u003c\/strong\u003e The single most common error. Once the pad is full it redistributes soil instead of lifting it, and the operator concludes the system does not work. Rinse it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing more pressure instead of rinsing.\u003c\/strong\u003e Pressure does not restore a loaded pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaving released soil to dry on the floor.\u003c\/strong\u003e Lift it before it re-deposits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring pads wet and dirty.\u003c\/strong\u003e Rinse and dry them; they are a reusable asset, not a consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrdering the wrong disc size.\u003c\/strong\u003e Check the machine's pad size — 400 mm and 425 mm look similar on a shelf and only one will fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuying only disc pads for a fire job.\u003c\/strong\u003e Most of that work is vertical. You need hand pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem System 7 Disc Pad 425 mm (17\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eS7PAD430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e425 mm diameter disc (17 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eProfiled multi-material structure with dirt-pulling action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReusable\u003c\/td\u003e\n\u003ctd\u003eYes — rinse out and reuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 m² per set of pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability\u003c\/td\u003e\n\u003ctd\u003eTear resistant, including on structured tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable sizes in the range\u003c\/td\u003e\n\u003ctd\u003e203 mm, 400 mm, 425 mm and hand pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended chemistry\u003c\/td\u003e\n\u003ctd\u003eTile \u0026amp; Grout Cleaner LF; Fire Fix and Fire Restore for restoration work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSystem 7 pads are cleaning accessories, not chemicals. No safety data sheet applies to the pad itself — but the chemicals used with it do carry classifications, and those are on the product pages linked below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this pad is 425 mm (17 inch). Our internal SKU for it reads S7PAD430, which does not match the pad size. The product supplied is the 425 mm pad. We are correcting the SKU and have flagged it so no one orders the wrong size on the strength of the code.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is this different from an ordinary floor pad?\u003c\/h3\u003e\n\u003cp\u003eAn ordinary pad is an abrasive that works on the surface — it cuts the top and polishes what is left. System 7's profiled multi-material structure reaches into the pore and pulls soil out, and holds it. On a floor that has gone grey from years of detergent and soil build-up, that difference is the whole result.\u003c\/p\u003e\n\u003ch3\u003eHow many times can I reuse a pad?\u003c\/h3\u003e\n\u003cp\u003eActichem states up to 10,000 m² per set. Actual life depends on the surface — structured and textured tile is harder on any pad — and on whether the pads are rinsed properly and dried before storage. Treat them as equipment rather than consumables and they will earn their cost several times over.\u003c\/p\u003e\n\u003ch3\u003eDo they really replace soot sponges on a fire job?\u003c\/h3\u003e\n\u003cp\u003eThey do the same job and then keep going. A dry chemical sponge loads with soot, gets trimmed back, and is eventually discarded. A System 7 pad is rinsed and returned to work. Restoration contractors using the pads with Fire Restore report eliminating repainting on some walls, which is a far larger saving than the pads themselves.\u003c\/p\u003e\n\u003ch3\u003eWhich chemical should I use with them?\u003c\/h3\u003e\n\u003cp\u003eTile \u0026amp; Grout Cleaner LF for general hard floor cleaning. Fire Fix or Fire Restore for smoke and soot residue. Read the classification on each of those product pages before use — Fire Restore in particular is a corrosive product and its dangerous goods exemption does not make it safe to handle casually.\u003c\/p\u003e\n\u003ch3\u003eWill they damage the floor?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to lift soil rather than abrade the surface, so they are gentler on a finish than an aggressive abrasive pad. Pre-test on polished and sensitive surfaces as you would with any pad and any chemistry.\u003c\/p\u003e\n\u003ch3\u003eCan I use them on textured or structured tile?\u003c\/h3\u003e\n\u003cp\u003eYes — this is one of their strengths. Structured tile shreds ordinary pads. The System 7 material stays tear resistant on it, and the profiled face reaches into the texture where the soil actually is.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my machine?\u003c\/h3\u003e\n\u003cp\u003eMatch the pad to the machine's stated pad size. 400 mm is 16 inch and 425 mm is 17 inch, and they are not interchangeable. If you are unsure, tell us the machine model and we will confirm before you order.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003eSystem 7 Hand Pad 115 × 250 mm\u003c\/a\u003e — walls, edges and detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003eSystem 7 Disc Pad 203 mm (8\")\u003c\/a\u003e — small machines and confined areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003eSystem 7 Disc Pad 400 mm (16\")\u003c\/a\u003e — the common commercial size.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the hard floor chemistry the system is built around.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eActichem Fire Restore\u003c\/a\u003e — smoke and soot residue removal. \u003cstrong\u003eClassified corrosive — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — fire and smoke restoration cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe System 7 pad solves a problem most operators have written off as permanent: mineral hard floors that have gone grey from years of soil and detergent build-up deep in the surface, where strong chemicals and abrasive pads cannot reach.\u003c\/p\u003e\n\u003cp\u003eIt is also, in fire restoration, a genuine improvement on the traditional soot sponge — because it rinses out and keeps working, and because combined with Fire Restore it has taken repainting off the scope of work on jobs where that would once have been unavoidable.\u003c\/p\u003e\n\u003cp\u003eRinse it when it loads up, dry it before storage, and match the disc size to your machine. Used that way a set will cover up to 10,000 m².\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: S7PAD430\u003c\/p\u003e\n\u003cp\u003eNot sure which pad size fits your machine, or whether System 7 will lift the greying on a particular floor? Contact Carpet Cleaners Warehouse before you order — tell us the machine model and the floor type and we will confirm.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"EACH","offer_id":44251959558357,"sku":"S7PAD430","price":95.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-System-7-Disc-Pad-425mm-17.jpg?v=1780551511"},{"product_id":"actichem-system-7-hand-pad-115-x-250mm","title":"Actichem System 7 Hand Pad 115 x 250mm","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Actichem System 7 is a hard floor cleaning system built around a pad with a profiled, multi-material structure that pulls soil out of the pore rather than polishing across the top of it. This is the \u003cstrong\u003eHand Pad 115 × 250 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt exists to solve a specific and very common problem. Mineral hard floors go grey and unsightly over years, not from surface dirt but from soil and detergent residue built up deep in the surface texture. That build-up survives strong chemicals and it survives abrasive floor pads, because neither reaches into the pore. A conventional pad polishes the top of the soil; System 7 lifts it out.\u003c\/p\u003e\n\u003cp\u003eThe pads are used with Actichem's hard floor chemistry — principally Tile \u0026amp; Grout Cleaner LF for general floor work, and Fire Fix or Fire Restore for fire and smoke restoration.\u003c\/p\u003e\n\u003ch2\u003eWhere It Is Used\u003c\/h2\u003e\n\u003ch3\u003eGeneral hard floor cleaning\u003c\/h3\u003e\n\u003cp\u003eRetail centres, industrial workshops, banks, offices, hospitals, airports — anywhere with heavy foot traffic and mineral hard flooring. The dirt shows worst in high-traffic paths and around entries, and it is the kind of greying that clients assume is permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe larger the area, the stronger the case for System 7.\u003c\/strong\u003e The economics come from covering ground quickly with a pad that keeps working rather than clogging.\u003c\/p\u003e\n\u003ch3\u003eFire and smoke restoration\u003c\/h3\u003e\n\u003cp\u003eThis is where the pads earn their reputation, and it is a significant advance on traditional dry chemical sponges.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey rinse out and are reused,\u003c\/strong\u003e again and again. A soot sponge loads up, gets trimmed back and is eventually thrown away. A System 7 pad is rinsed and returned to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaired with Fire Restore or Fire Fix\u003c\/strong\u003e they form a genuinely effective soot and smoke residue removal system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMany restoration contractors report eliminating the need to repaint some walls entirely\u003c\/strong\u003e using the System 7 pad and Fire Restore combination — which changes the economics of a fire job substantially.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfiled multi-material structure.\u003c\/strong\u003e The combination of materials and the profile of the pad face are what produce the dirt-pulling effect. It is not an abrasive that grinds the surface; it is a structure that grips soil and carries it away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge soil capacity.\u003c\/strong\u003e The pad holds what it lifts instead of pushing it around, which is why the floor comes up clean rather than uniformly grey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-pore action.\u003c\/strong\u003e It reaches into the surface texture that conventional pads skim over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear resistant on structured tile.\u003c\/strong\u003e Textured and structured tiles destroy ordinary pads. This material stays intact on them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinsable and reusable.\u003c\/strong\u003e Both a cost and a waste advantage.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUp to 10,000 m² per set of pads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoosing the Right Size\u003c\/h2\u003e\n\u003cp\u003eThe disc pads fit standard rotary and single-disc floor machines. Match the pad to the machine's stated pad size, not to the machine's overall footprint.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePad\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eImperial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical use\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003e203 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 inch\u003c\/td\u003e\n\u003ctd\u003eSmall rotary machines, restrooms, confined areas, edge work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003e400 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003ctd\u003eThe common commercial size — the standard choice for most single-disc machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003e425 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e17 inch\u003c\/td\u003e\n\u003ctd\u003eLarger machines and open-floor commercial work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003e115 × 250 mm hand pad\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eWalls, vertical surfaces, detail work, edges, stairs and all fire restoration wall work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMost operators need two.\u003c\/strong\u003e A disc pad matched to the machine for the floor area, and hand pads for the edges, corners and anything vertical. On fire restoration work the hand pad does the majority of the job, because most soot damage is on walls and ceilings rather than floors.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFit the disc pad to the machine's driver, or take the hand pad in hand for wall and detail work.\u003c\/li\u003e\n\u003cli\u003eApply the appropriate chemical — Tile \u0026amp; Grout Cleaner LF for general floor soil, Fire Fix or Fire Restore for smoke and soot residue.\u003c\/li\u003e\n\u003cli\u003eWork the surface. Let the pad structure do the work rather than forcing it; the dirt-pulling effect comes from the profile, not from pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse the pad out when it loads up\u003c\/strong\u003e and return it to work. A loaded pad stops lifting and starts smearing — rinsing is what keeps it cutting.\u003c\/li\u003e\n\u003cli\u003eExtract or mop up the released soil rather than letting it dry back onto the floor.\u003c\/li\u003e\n\u003cli\u003eRinse the pads thoroughly at the end of the job and allow them to dry before storage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking with a loaded pad.\u003c\/strong\u003e The single most common error. Once the pad is full it redistributes soil instead of lifting it, and the operator concludes the system does not work. Rinse it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing more pressure instead of rinsing.\u003c\/strong\u003e Pressure does not restore a loaded pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaving released soil to dry on the floor.\u003c\/strong\u003e Lift it before it re-deposits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring pads wet and dirty.\u003c\/strong\u003e Rinse and dry them; they are a reusable asset, not a consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrdering the wrong disc size.\u003c\/strong\u003e Check the machine's pad size — 400 mm and 425 mm look similar on a shelf and only one will fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuying only disc pads for a fire job.\u003c\/strong\u003e Most of that work is vertical. You need hand pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem System 7 Hand Pad 115 × 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eS7PADHAND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e115 × 250 mm hand pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eProfiled multi-material structure with dirt-pulling action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReusable\u003c\/td\u003e\n\u003ctd\u003eYes — rinse out and reuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 m² per set of pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability\u003c\/td\u003e\n\u003ctd\u003eTear resistant, including on structured tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable sizes in the range\u003c\/td\u003e\n\u003ctd\u003e203 mm, 400 mm, 425 mm and hand pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended chemistry\u003c\/td\u003e\n\u003ctd\u003eTile \u0026amp; Grout Cleaner LF; Fire Fix and Fire Restore for restoration work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSystem 7 pads are cleaning accessories, not chemicals. No safety data sheet applies to the pad itself — but the chemicals used with it do carry classifications, and those are on the product pages linked below.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is this different from an ordinary floor pad?\u003c\/h3\u003e\n\u003cp\u003eAn ordinary pad is an abrasive that works on the surface — it cuts the top and polishes what is left. System 7's profiled multi-material structure reaches into the pore and pulls soil out, and holds it. On a floor that has gone grey from years of detergent and soil build-up, that difference is the whole result.\u003c\/p\u003e\n\u003ch3\u003eHow many times can I reuse a pad?\u003c\/h3\u003e\n\u003cp\u003eActichem states up to 10,000 m² per set. Actual life depends on the surface — structured and textured tile is harder on any pad — and on whether the pads are rinsed properly and dried before storage. Treat them as equipment rather than consumables and they will earn their cost several times over.\u003c\/p\u003e\n\u003ch3\u003eDo they really replace soot sponges on a fire job?\u003c\/h3\u003e\n\u003cp\u003eThey do the same job and then keep going. A dry chemical sponge loads with soot, gets trimmed back, and is eventually discarded. A System 7 pad is rinsed and returned to work. Restoration contractors using the pads with Fire Restore report eliminating repainting on some walls, which is a far larger saving than the pads themselves.\u003c\/p\u003e\n\u003ch3\u003eWhich chemical should I use with them?\u003c\/h3\u003e\n\u003cp\u003eTile \u0026amp; Grout Cleaner LF for general hard floor cleaning. Fire Fix or Fire Restore for smoke and soot residue. Read the classification on each of those product pages before use — Fire Restore in particular is a corrosive product and its dangerous goods exemption does not make it safe to handle casually.\u003c\/p\u003e\n\u003ch3\u003eWill they damage the floor?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to lift soil rather than abrade the surface, so they are gentler on a finish than an aggressive abrasive pad. Pre-test on polished and sensitive surfaces as you would with any pad and any chemistry.\u003c\/p\u003e\n\u003ch3\u003eCan I use them on textured or structured tile?\u003c\/h3\u003e\n\u003cp\u003eYes — this is one of their strengths. Structured tile shreds ordinary pads. The System 7 material stays tear resistant on it, and the profiled face reaches into the texture where the soil actually is.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my machine?\u003c\/h3\u003e\n\u003cp\u003eMatch the pad to the machine's stated pad size. 400 mm is 16 inch and 425 mm is 17 inch, and they are not interchangeable. If you are unsure, tell us the machine model and we will confirm before you order.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003eSystem 7 Disc Pad 203 mm (8\")\u003c\/a\u003e — small machines and confined areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003eSystem 7 Disc Pad 400 mm (16\")\u003c\/a\u003e — the common commercial size.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003eSystem 7 Disc Pad 425 mm (17\")\u003c\/a\u003e — larger machines and open floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the hard floor chemistry the system is built around.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eActichem Fire Restore\u003c\/a\u003e — smoke and soot residue removal. \u003cstrong\u003eClassified corrosive — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — fire and smoke restoration cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe System 7 pad solves a problem most operators have written off as permanent: mineral hard floors that have gone grey from years of soil and detergent build-up deep in the surface, where strong chemicals and abrasive pads cannot reach.\u003c\/p\u003e\n\u003cp\u003eIt is also, in fire restoration, a genuine improvement on the traditional soot sponge — because it rinses out and keeps working, and because combined with Fire Restore it has taken repainting off the scope of work on jobs where that would once have been unavoidable.\u003c\/p\u003e\n\u003cp\u003eRinse it when it loads up, dry it before storage, and match the disc size to your machine. Used that way a set will cover up to 10,000 m².\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: S7PADHAND\u003c\/p\u003e\n\u003cp\u003eNot sure which pad size fits your machine, or whether System 7 will lift the greying on a particular floor? Contact Carpet Cleaners Warehouse before you order — tell us the machine model and the floor type and we will confirm.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"EACH","offer_id":44251959591125,"sku":"S7PADHAND","price":14.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-System-7-Hand-Pad-115-x-250mm.jpg?v=1780551511"},{"product_id":"actichem-system-7-disc-pad-203mm-8","title":"Actichem System 7 Disc Pad 203mm - 8\"","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Actichem System 7 is a hard floor cleaning system built around a pad with a profiled, multi-material structure that pulls soil out of the pore rather than polishing across the top of it. This is the \u003cstrong\u003eDisc Pad 203 mm (8\")\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt exists to solve a specific and very common problem. Mineral hard floors go grey and unsightly over years, not from surface dirt but from soil and detergent residue built up deep in the surface texture. That build-up survives strong chemicals and it survives abrasive floor pads, because neither reaches into the pore. A conventional pad polishes the top of the soil; System 7 lifts it out.\u003c\/p\u003e\n\u003cp\u003eThe pads are used with Actichem's hard floor chemistry — principally Tile \u0026amp; Grout Cleaner LF for general floor work, and Fire Fix or Fire Restore for fire and smoke restoration.\u003c\/p\u003e\n\u003ch2\u003eWhere It Is Used\u003c\/h2\u003e\n\u003ch3\u003eGeneral hard floor cleaning\u003c\/h3\u003e\n\u003cp\u003eRetail centres, industrial workshops, banks, offices, hospitals, airports — anywhere with heavy foot traffic and mineral hard flooring. The dirt shows worst in high-traffic paths and around entries, and it is the kind of greying that clients assume is permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe larger the area, the stronger the case for System 7.\u003c\/strong\u003e The economics come from covering ground quickly with a pad that keeps working rather than clogging.\u003c\/p\u003e\n\u003ch3\u003eFire and smoke restoration\u003c\/h3\u003e\n\u003cp\u003eThis is where the pads earn their reputation, and it is a significant advance on traditional dry chemical sponges.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey rinse out and are reused,\u003c\/strong\u003e again and again. A soot sponge loads up, gets trimmed back and is eventually thrown away. A System 7 pad is rinsed and returned to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaired with Fire Restore or Fire Fix\u003c\/strong\u003e they form a genuinely effective soot and smoke residue removal system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMany restoration contractors report eliminating the need to repaint some walls entirely\u003c\/strong\u003e using the System 7 pad and Fire Restore combination — which changes the economics of a fire job substantially.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfiled multi-material structure.\u003c\/strong\u003e The combination of materials and the profile of the pad face are what produce the dirt-pulling effect. It is not an abrasive that grinds the surface; it is a structure that grips soil and carries it away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge soil capacity.\u003c\/strong\u003e The pad holds what it lifts instead of pushing it around, which is why the floor comes up clean rather than uniformly grey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-pore action.\u003c\/strong\u003e It reaches into the surface texture that conventional pads skim over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear resistant on structured tile.\u003c\/strong\u003e Textured and structured tiles destroy ordinary pads. This material stays intact on them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinsable and reusable.\u003c\/strong\u003e Both a cost and a waste advantage.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUp to 10,000 m² per set of pads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoosing the Right Size\u003c\/h2\u003e\n\u003cp\u003eThe disc pads fit standard rotary and single-disc floor machines. Match the pad to the machine's stated pad size, not to the machine's overall footprint.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePad\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eImperial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical use\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-203mm-8\"\u003e203 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 inch\u003c\/td\u003e\n\u003ctd\u003eSmall rotary machines, restrooms, confined areas, edge work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003e400 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003ctd\u003eThe common commercial size — the standard choice for most single-disc machines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003e425 mm disc\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e17 inch\u003c\/td\u003e\n\u003ctd\u003eLarger machines and open-floor commercial work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003e115 × 250 mm hand pad\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eWalls, vertical surfaces, detail work, edges, stairs and all fire restoration wall work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMost operators need two.\u003c\/strong\u003e A disc pad matched to the machine for the floor area, and hand pads for the edges, corners and anything vertical. On fire restoration work the hand pad does the majority of the job, because most soot damage is on walls and ceilings rather than floors.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFit the disc pad to the machine's driver, or take the hand pad in hand for wall and detail work.\u003c\/li\u003e\n\u003cli\u003eApply the appropriate chemical — Tile \u0026amp; Grout Cleaner LF for general floor soil, Fire Fix or Fire Restore for smoke and soot residue.\u003c\/li\u003e\n\u003cli\u003eWork the surface. Let the pad structure do the work rather than forcing it; the dirt-pulling effect comes from the profile, not from pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse the pad out when it loads up\u003c\/strong\u003e and return it to work. A loaded pad stops lifting and starts smearing — rinsing is what keeps it cutting.\u003c\/li\u003e\n\u003cli\u003eExtract or mop up the released soil rather than letting it dry back onto the floor.\u003c\/li\u003e\n\u003cli\u003eRinse the pads thoroughly at the end of the job and allow them to dry before storage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eMistakes to Avoid\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking with a loaded pad.\u003c\/strong\u003e The single most common error. Once the pad is full it redistributes soil instead of lifting it, and the operator concludes the system does not work. Rinse it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing more pressure instead of rinsing.\u003c\/strong\u003e Pressure does not restore a loaded pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaving released soil to dry on the floor.\u003c\/strong\u003e Lift it before it re-deposits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoring pads wet and dirty.\u003c\/strong\u003e Rinse and dry them; they are a reusable asset, not a consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrdering the wrong disc size.\u003c\/strong\u003e Check the machine's pad size — 400 mm and 425 mm look similar on a shelf and only one will fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuying only disc pads for a fire job.\u003c\/strong\u003e Most of that work is vertical. You need hand pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem System 7 Disc Pad 203 mm (8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eS7PAD203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e203 mm diameter disc (8 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eProfiled multi-material structure with dirt-pulling action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReusable\u003c\/td\u003e\n\u003ctd\u003eYes — rinse out and reuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 m² per set of pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability\u003c\/td\u003e\n\u003ctd\u003eTear resistant, including on structured tile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable sizes in the range\u003c\/td\u003e\n\u003ctd\u003e203 mm, 400 mm, 425 mm and hand pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended chemistry\u003c\/td\u003e\n\u003ctd\u003eTile \u0026amp; Grout Cleaner LF; Fire Fix and Fire Restore for restoration work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSystem 7 pads are cleaning accessories, not chemicals. No safety data sheet applies to the pad itself — but the chemicals used with it do carry classifications, and those are on the product pages linked below.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is this different from an ordinary floor pad?\u003c\/h3\u003e\n\u003cp\u003eAn ordinary pad is an abrasive that works on the surface — it cuts the top and polishes what is left. System 7's profiled multi-material structure reaches into the pore and pulls soil out, and holds it. On a floor that has gone grey from years of detergent and soil build-up, that difference is the whole result.\u003c\/p\u003e\n\u003ch3\u003eHow many times can I reuse a pad?\u003c\/h3\u003e\n\u003cp\u003eActichem states up to 10,000 m² per set. Actual life depends on the surface — structured and textured tile is harder on any pad — and on whether the pads are rinsed properly and dried before storage. Treat them as equipment rather than consumables and they will earn their cost several times over.\u003c\/p\u003e\n\u003ch3\u003eDo they really replace soot sponges on a fire job?\u003c\/h3\u003e\n\u003cp\u003eThey do the same job and then keep going. A dry chemical sponge loads with soot, gets trimmed back, and is eventually discarded. A System 7 pad is rinsed and returned to work. Restoration contractors using the pads with Fire Restore report eliminating repainting on some walls, which is a far larger saving than the pads themselves.\u003c\/p\u003e\n\u003ch3\u003eWhich chemical should I use with them?\u003c\/h3\u003e\n\u003cp\u003eTile \u0026amp; Grout Cleaner LF for general hard floor cleaning. Fire Fix or Fire Restore for smoke and soot residue. Read the classification on each of those product pages before use — Fire Restore in particular is a corrosive product and its dangerous goods exemption does not make it safe to handle casually.\u003c\/p\u003e\n\u003ch3\u003eWill they damage the floor?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to lift soil rather than abrade the surface, so they are gentler on a finish than an aggressive abrasive pad. Pre-test on polished and sensitive surfaces as you would with any pad and any chemistry.\u003c\/p\u003e\n\u003ch3\u003eCan I use them on textured or structured tile?\u003c\/h3\u003e\n\u003cp\u003eYes — this is one of their strengths. Structured tile shreds ordinary pads. The System 7 material stays tear resistant on it, and the profiled face reaches into the texture where the soil actually is.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my machine?\u003c\/h3\u003e\n\u003cp\u003eMatch the pad to the machine's stated pad size. 400 mm is 16 inch and 425 mm is 17 inch, and they are not interchangeable. If you are unsure, tell us the machine model and we will confirm before you order.\u003c\/p\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-hand-pad-115-x-250mm\"\u003eSystem 7 Hand Pad 115 × 250 mm\u003c\/a\u003e — walls, edges and detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-400mm-16\"\u003eSystem 7 Disc Pad 400 mm (16\")\u003c\/a\u003e — the common commercial size.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-system-7-disc-pad-425mm-17\"\u003eSystem 7 Disc Pad 425 mm (17\")\u003c\/a\u003e — larger machines and open floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the hard floor chemistry the system is built around.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-restore-5ltr\"\u003eActichem Fire Restore\u003c\/a\u003e — smoke and soot residue removal. \u003cstrong\u003eClassified corrosive — read that page before use.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-fire-fix-5ltr\"\u003eActichem Fire Fix\u003c\/a\u003e — fire and smoke restoration cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe System 7 pad solves a problem most operators have written off as permanent: mineral hard floors that have gone grey from years of soil and detergent build-up deep in the surface, where strong chemicals and abrasive pads cannot reach.\u003c\/p\u003e\n\u003cp\u003eIt is also, in fire restoration, a genuine improvement on the traditional soot sponge — because it rinses out and keeps working, and because combined with Fire Restore it has taken repainting off the scope of work on jobs where that would once have been unavoidable.\u003c\/p\u003e\n\u003cp\u003eRinse it when it loads up, dry it before storage, and match the disc size to your machine. Used that way a set will cover up to 10,000 m².\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: S7PAD203\u003c\/p\u003e\n\u003cp\u003eNot sure which pad size fits your machine, or whether System 7 will lift the greying on a particular floor? Contact Carpet Cleaners Warehouse before you order — tell us the machine model and the floor type and we will confirm.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"EACH","offer_id":44251992981717,"sku":"S7PAD203","price":61.77,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-System-7-Disc-Pad-203mm-8.jpg?v=1780551512"},{"product_id":"actichem-hypo-enforcer-mould-stain-remover-1-ltr","title":"Actichem Hypo Enforcer Mould Stain Remover 1 ltr","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem’s Hypo Enforcer is the core proprietary ingredient used to make Mould Exterminator the amazing product that it is. Hypo Enforcer is like a nitrous boost to the chlorine power in Sodium Hypochlorite. On its own, Sodium Hypochlorite will only actually release a small percentage of its real power when applied to a mould-affected surface. This is due to its in-built stabilisation mechanism and its poor wetting ability. When you add Hypo Enforcer, Sodium Hypochlorite comes alive. You will immediately extract every single atom of power out of the Chlorine molecule, and drive that power right down deep into the roots and hyphae of the mould and thoroughly destroy it.\u003c\/p\u003e\n\u003cp\u003eHypo Enforcer is an additive, not a stand-alone mould treatment. It is supplied as a concentrate and is mixed into sodium hypochlorite before use. This 1 litre pack is the trial and small-job size — one litre makes up a single 15 litre batch.\u003c\/p\u003e\n\u003ch2\u003eWhat Hypo Enforcer Is — and What It Is Not\u003c\/h2\u003e\n\u003cp\u003eDespite the name, \u003cstrong\u003eHypo Enforcer contains no hypochlorite and no chlorine of any kind.\u003c\/strong\u003e The Safety Data Sheet (version 1.3, 25 December 2025) lists sodium carbonate, sodium metasilicate pentahydrate, sodium lauryl ether sulphate and two proprietary surfactants. It is an alkaline builder and super-wetting surfactant package. The chlorine comes entirely from the sodium hypochlorite you add to it.\u003c\/p\u003e\n\u003cp\u003eTwo practical consequences follow, and both matter on site:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHypo Enforcer will not kill mould or sanitise anything on its own.\u003c\/strong\u003e It has no biocidal claim. It is a carrier and activator for hypochlorite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe mixed working solution is a hypochlorite solution\u003c\/strong\u003e and carries every hazard hypochlorite carries — including the liberation of chlorine gas on contact with acid — even though the Hypo Enforcer concentrate on its own does not.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eHypo Enforcer + Chlorine’s unique, super-wetting formula provides consistent, reliable results in mould remediation every time. Its powerful stain removal can be seen almost instantly when applied to mould-affected surfaces. Hypo Enforcer + Chlorine penetrates deep into the affected surface and destroys the mould hyphae and root system.\u003c\/p\u003e\n\u003cp\u003eTo be clear about what that does and does not promise: clearance on a remediation job depends on the whole process — containment, source removal, physical removal of contaminated material, drying, and independent verification. No single product delivers a clearance result. Hypo Enforcer is one step in that process, and its job is to make the chlorine step work harder.\u003c\/p\u003e\n\u003ch2\u003eMixing\u003c\/h2\u003e\n\u003cp\u003eActichem’s stated ratio:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAdd 1 litre of Hypo Enforcer to 15 litres of 12.5% sodium hypochlorite (pool chlorine). Mix well.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis 1 litre pack therefore makes up one 15 litre batch of treated hypochlorite. If you are treating chlorine in larger volumes, the \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003e5 litre pack\u003c\/a\u003e treats up to 75 litres and is the better value.\u003c\/p\u003e\n\u003cp\u003eMix in a clean, well-ventilated area, outdoors or under mechanical ventilation. Add the Hypo Enforcer to the hypochlorite, not the other way around, and never mix in a container that has held an acid product. Use only fresh, clean equipment.\u003c\/p\u003e\n\u003cp\u003eIf you would rather not handle 12.5% pool chlorine yourself, Actichem supply the same chemistry pre-blended as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e, which contains sodium hypochlorite at less than 10% together with the same surfactant package. Mould Exterminator is classified as dangerous goods; Hypo Enforcer on its own is not.\u003c\/p\u003e\n\u003ch2\u003eDirections for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-test in an inconspicuous location before treating the whole area.\u003c\/li\u003e\n\u003cli\u003eRemove loose debris and surface contamination.\u003c\/li\u003e\n\u003cli\u003eApply the mixed solution by spray, mop or cloth.\u003c\/li\u003e\n\u003cli\u003eAgitate areas with heavy build-up.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum 1 minute dwell time for disinfection, or 10 minutes for mould remediation.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat where organic loading is heavy.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eIdeal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways. Suitable for natural stone, ceramic and porcelain, concrete and masonry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use on carpets, fabrics or sensitive surfaces.\u003c\/strong\u003e This is Actichem’s own restriction and it is worth stating plainly, because Hypo Enforcer is sold alongside carpet and upholstery chemistry. The mixed solution is a strong hypochlorite bleach and will destroy dyes and damage fibres. For mould odour and staining on textiles, ask us for a textile-appropriate product instead.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisinfects\u003c\/strong\u003e — bio-contaminated surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKills\u003c\/strong\u003e — mould (including roots and hyphae) and removes the staining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — to provide complete sanitisation of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the Hypochlorous Acid to penetrate faster and deeper into the inner structure of the fibre and porous substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning and de-staining\u003c\/strong\u003e — Actichem Enforcer also provides outstanding cleaning power to remove the accompanying organic grime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page carried no safety information at all. That was an omission on our part and we have corrected it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHypo Enforcer is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the Model WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods for transport.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 2; Serious Eye Damage\/Eye Irritation Category 1\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e11.5 – 11.9\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePersonal protective equipment.\u003c\/strong\u003e Elbow-length chemical protective gloves (neoprene or butyl are recommended), and chemical goggles or safety glasses with side shields. H318 means eye contact can cause irreversible damage — goggles are not optional when decanting or mixing. Where spraying produces mist, or where ventilation is limited, use a respirator with a Type A filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — eyes.\u003c\/strong\u003e Wash out immediately with fresh running water for 10 to 15 minutes, holding the eyelids open to ensure complete irrigation. Immediately call a Poisons Information Centre or doctor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirst aid — skin.\u003c\/strong\u003e Immediately remove all contaminated clothing including footwear. Flush skin and hair with running water and soap. Seek medical attention if irritation develops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on SDS versions.\u003c\/strong\u003e The current sheet is version 1.3, issued 25 December 2025. The previous version 1.2, issued 6 April 2023, additionally classified the product Acute Toxicity (Inhalation) Category 3 with \u003cstrong\u003eH331 — toxic if inhaled\u003c\/strong\u003e, and listed sodium tripolyphosphate rather than sodium metasilicate. If you hold the 2023 sheet in your safety file, replace it. If your risk assessment was built on the 2023 classification, review it.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid\u003c\/h2\u003e\n\u003cp\u003eHypo Enforcer is used with sodium hypochlorite, and \u003cstrong\u003ehypochlorite liberates chlorine gas on contact with acid.\u003c\/strong\u003e Chlorine gas causes severe respiratory injury and can be fatal in a confined space such as a bathroom, sub-floor or plant room.\u003c\/p\u003e\n\u003cp\u003eNever mix the Hypo Enforcer working solution — or allow it to pool, run into, or share equipment with — any of the following acid products we also supply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eActichem Rust Remover\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eActichem Crete Clean\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e and the other tile and grout restorers\u003c\/li\u003e\n\u003cli\u003eAny acid rinse, descaler, toilet bowl cleaner or efflorescence remover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso never mix with ammonia or ammoniated cleaners\u003c\/strong\u003e, which form \u003cstrong\u003echloramine gas\u003c\/strong\u003e with hypochlorite — a gas that causes severe respiratory injury and can be fatal in a confined space such as a bathroom, sub-floor or roof cavity. \u003cstrong\u003eIn our own range that means \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-bust-500ml-spray\"\u003eActichem Bust\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-protein-spotter-500ml-spray\"\u003eActichem Protein Spotter\u003c\/a\u003e\u003c\/strong\u003e, both alkaline ammoniated spotters commonly carried in the same kit as a chlorine product. It also includes household ammonia and many glass and multi-purpose cleaners. \u003cstrong\u003eNever spray one onto a surface still wet with the other.\u003c\/strong\u003e This matters especially here, because Hypo Enforcer is mixed on site with sodium hypochlorite — the working solution is a hypochlorite solution, and the same incompatibilities apply to it as to the chlorine product itself. If you are running an acid step and a chlorine step on the same job, rinse thoroughly with clean water between them and use separate, clearly labelled equipment.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP728.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e1 litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAlkaline booster and super-wetting agent for sodium hypochlorite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear, mobile yellow liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolubility\u003c\/td\u003e\n\u003ctd\u003eMiscible in water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e11.5 – 11.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio\u003c\/td\u003e\n\u003ctd\u003e1 litre per 15 litres of 12.5% sodium hypochlorite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage per pack\u003c\/td\u003e\n\u003ctd\u003eTreats 15 litres of 12.5% sodium hypochlorite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e1 minute disinfection; 10 minutes mould remediation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.3, issued 25 December 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eActichem Hypo Enforcer 5 Ltr\u003c\/a\u003e — the same product in the production pack, treating up to 75 litres of hypochlorite\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e — ready-blended hypochlorite version, no pool chlorine handling required\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-remover-5-ltr\"\u003eActichem Mould Remover\u003c\/a\u003e — a chlorine-free, peroxide-based alternative for situations where bleach is unsuitable \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/AP728-Hypo-Enforcer-25122025.pdf\"\u003eActichem Hypo Enforcer Safety Data Sheet — version 1.3, issued 25 December 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRead the SDS for the sodium hypochlorite you are mixing with as well. The working solution is governed by both.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP728.01\u003c\/p\u003e\n\u003cp\u003eNot sure whether Hypo Enforcer, Mould Exterminator or a chlorine-free product is right for the job in front of you? Contact Carpet Cleaners Warehouse before you order. Getting the chemistry right the first time is cheaper than getting it wrong on someone’s property.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"1LTR","offer_id":44285650403541,"sku":"AP728.01","price":79.92,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Hypo-Enforcer-Mould-Stain-Remover-1-ltr.jpg?v=1780551513"},{"product_id":"actichem-airfresh-spray-5-ltr","title":"Actichem Airfresh Spray 5 Ltr","description":"\u003cp\u003eAirfresh Spray is Actichem's ready-to-use aerial odour control spray - the one you reach for when the remediation work is finished and the smell is still hanging in the air. It uses Elimotech essential-oil chemistry to pair with odour molecules and convert them into inert, non-reversible compounds, so the odour is eliminated rather than masked. This listing is the 5 litre pack.\u003c\/p\u003e\n\u003cp\u003eIt is the right product for finishing off a job: localised areas too small to justify fogging equipment, or areas where you want minimum residue. It is the wrong product if the odour source is still physically present - deal with that first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read the safety section below before you order.\u003c\/strong\u003e There is an unresolved discrepancy between Actichem's current product information and the safety data sheet we hold, and we would rather you knew about it than not.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eSimply cleaning an area will not remove odour molecules. Bad odours exist in the air and are trapped in fabrics, carpets and porous materials. Even after a thorough disinfection and wash-down, residual odour compounds persist. In addition to a cleaning routine, you need an odour control strategy.\u003c\/p\u003e\n\u003cp\u003eElimotech works at a micro-molecular level. It pairs with trapped, embedded and airborne odour compounds and forms inert molecules that cannot revert - which is the difference between eliminating an odour and perfuming over it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional odour neutralising technology\u003c\/strong\u003e - patented odour-pairing chemistry, not masking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEssential oil based\u003c\/strong\u003e - Elimotech essential oils with aerial disinfection chemistry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface safe\u003c\/strong\u003e - safe on virtually all water-cleanable hard surfaces, carpets, fabrics and garments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide application\u003c\/strong\u003e - formulated for the stench of rotting organics, human and animal waste, and malodours caused by fire activity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh residual scent\u003c\/strong\u003e - deodorises the treated area and resets the olfactory senses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it earns its place\u003c\/h2\u003e\n\u003cp\u003eAirfresh Spray is primarily a stand-alone aerial room spray, misted through a trigger spray or pressure sprayer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocalised areas\u003c\/strong\u003e - too small to be worth setting up fogging equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-residue work\u003c\/strong\u003e - where a fogged deposit would be unwelcome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray and wipe\u003c\/strong\u003e - smooth surfaces, appliances and household items.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjection\u003c\/strong\u003e - directly into cushions, upholstery, carpeting and soft furnishings, where the odour is inside the item rather than on it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal step\u003c\/strong\u003e - typically used once remediation work is complete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant - this is not a fogging chemical\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo not apply Airfresh Spray with a wet or thermal fogger.\u003c\/strong\u003e It is formulated for spray application. If you need to treat a whole space through fogging equipment, that is the Odourtak range, not this product.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eAirfresh Spray is supplied \u003cstrong\u003eready to use - no dilution required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor light applications it can be diluted 1:1 with water or methylated spirits. When injecting into cushioning, diluting 1:1 to 1:3 with methylated spirits aids spreading through the filling.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove or cover all food, food equipment, and anything that may be adversely affected by solvents.\u003c\/li\u003e\n\u003cli\u003eMist the areas requiring treatment. \u003cstrong\u003eAvoid over-application.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOn surfaces, spray the mist directly on, allow 5-10 minutes reaction time, then wipe dry with an absorbent cloth.\u003c\/li\u003e\n\u003cli\u003eFor soft furnishings, inject directly into the cushioning. Over-application here can deform the filling.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe treated area can usually be reoccupied within 30 minutes.\u003c\/p\u003e\n\u003cp\u003eWear suitable respiratory protection when spraying in large quantities.\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe are being upfront about a discrepancy on this product rather than picking whichever answer suits us.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe safety data sheet Carpet Cleaners Warehouse holds for Airfresh Spray is \u003cstrong\u003eversion 1.1, issued 12 August 2021\u003c\/strong\u003e, under Actichem product code \u003cstrong\u003eRG551\u003c\/strong\u003e. It classifies the product as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-hazardous chemical\u003c\/strong\u003e under the Model WHS Regulations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-dangerous goods\u003c\/strong\u003e under the ADG Code\u003c\/li\u003e\n\u003cli\u003eNo GHS classification, no signal word, no hazard statements\u003c\/li\u003e\n\u003cli\u003eAll ingredients non-hazardous; no personal protective equipment specified as required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat sheet also records the product as \u003cstrong\u003enon-combustible\u003c\/strong\u003e, with flash point and flammability \"not applicable\", a boiling point of 100 degrees C, miscible in water, relative density 1, pH 7-8, clear and colourless with a powder floral odour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere is the problem.\u003c\/strong\u003e Actichem's current product page describes Airfresh Spray as being based on a volatile, polar solvent, recommends dilution with methylated spirits, and warns that the product is flammable and that fire hazards should be avoided. A volatile, methylated-spirits-miscible solvent product is not usually non-combustible with no flash point. The two documents are difficult to reconcile, and the safety data sheet is now five years old.\u003c\/p\u003e\n\u003cp\u003eThere is also a \u003cstrong\u003eproduct code discrepancy\u003c\/strong\u003e: our variant SKU is RG511.05 and Actichem's current product page gives RG511, but the safety data sheet itself says RG551.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat we are doing about it.\u003c\/strong\u003e We have asked Actichem to confirm the current product code and to supply the current safety data sheet. Until they do, we are publishing the sheet we hold, dated, so you can see exactly what it says and how old it is.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat we suggest you do.\u003c\/strong\u003e Treat Airfresh Spray as flammable until Actichem confirm otherwise. Keep it away from ignition sources, and do not assume the absence of a signal word on a 2021 sheet describes the product in the bottle today. If you need a current safety data sheet for a compliance file, ring us and we will chase it for you.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/SDS_Safety_Data_Sheet_Actichem_Airfresh_Spray_Ultimate_Odour_Controller_Deodoriser.pdf\"\u003eDownload the Airfresh Spray Safety Data Sheet (version 1.1, 12 August 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Airfresh Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eRG511 per Actichem's current product page; RG551 on the safety data sheet - confirmation requested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eRG511.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre (Actichem also list a 750 ml pack, not currently stocked)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReady to use - no dilution required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eClear colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFresh floral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7 - 8 (neutral)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActive chemistry\u003c\/td\u003e\n\u003ctd\u003eElimotech essential oils with aerial disinfection chemistry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTrigger spray or pressure sprayer. Not for wet or thermal fogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eNone per the 2021 safety data sheet - see the safety section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNo - not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV Citrus 5 Ltr\u003c\/a\u003e - for fogging a whole space, where Airfresh Spray is for spraying a room.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deozyme-5ltr\"\u003eDeozyme 5 Ltr\u003c\/a\u003e - enzyme digester for organic material that is still present.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deosan-5ltr\"\u003eDeosan 5 Ltr\u003c\/a\u003e - anti-microbial neutraliser where the odour is bacterial.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deofresh-citrus-5-ltr\"\u003eDeofresh Citrus 5 Ltr\u003c\/a\u003e - routine carpet deodorising and fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-spray-n-wipe-5-ltr\"\u003eActichem Spray n Wipe 5 Ltr\u003c\/a\u003e - general surface cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to dilute it?\u003c\/h3\u003e\n\u003cp\u003eNo. Airfresh Spray is supplied ready to use. You can dilute 1:1 with water or methylated spirits for light applications, and 1:1 to 1:3 with methylated spirits when injecting into cushioning to help it spread.\u003c\/p\u003e\n\u003ch3\u003eCan I run it through my fogger?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem specify that it is not to be applied with a wet or thermal fogger. For whole-space fogging, use the Odourtak range.\u003c\/p\u003e\n\u003ch3\u003eIs it hazardous?\u003c\/h3\u003e\n\u003cp\u003eThe safety data sheet we hold, dated August 2021, says no - non-hazardous, non-dangerous goods, no signal word. But Actichem's current product page describes the product as flammable and solvent-based, which that sheet does not support. Until they clarify, treat it as flammable and keep it away from ignition sources.\u003c\/p\u003e\n\u003ch3\u003eHow long before the area can be used again?\u003c\/h3\u003e\n\u003cp\u003eUsually about 30 minutes after treatment.\u003c\/p\u003e\n\u003ch3\u003eWhy did my cushion go out of shape?\u003c\/h3\u003e\n\u003cp\u003eOver-application. Injecting too much solution into filling can deform it. Use less than you think you need and repeat if necessary.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between this and Odourtak?\u003c\/h3\u003e\n\u003cp\u003eApplication method more than chemistry. Airfresh Spray is sprayed or injected into a localised area with minimum residue. Odourtak is fogged through equipment to treat a whole space at once.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eWe think of Airfresh Spray as the product for the last bit of odour you can still detect after the real work has been done. It’s useful in small areas, on surfaces and in soft furnishings where setting up larger odour-control equipment would be unnecessary. If the odour disappears when you spray and comes back the following day, however, that’s usually a sign to go hunting for the remaining source rather than simply spraying the room again.\u003c\/p\u003e\n\u003cp\u003eIt also shouldn’t be wet-fogged or thermal-fogged; it is intended for aerial spray and direct application.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether you need Airfresh Spray, Odourtak, Deozyme or Deosan for the job in front of you? Ring us before you order and we will talk it through.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44285650469077,"sku":"RG511.05","price":76.51,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Airfresh-Spray-5-ltr.jpg?v=1780551514"},{"product_id":"actichem-spray-n-wipe-5-ltr","title":"Actichem Spray n Wipe 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Spray \u0026amp; Wipe is a concentrated multi-surface cleaner built on \u003cstrong\u003esurfactants plus enzymes\u003c\/strong\u003e. The enzyme component is what distinguishes it: it continues breaking down organic matter after the cleaning application has finished, which is why it performs well on the odour sources in washrooms and kitchens rather than just on visible soil.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps working after you leave\u003c\/strong\u003e — Elimotech enzyme technology continues digesting organic matter on the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeals with the source of odour\u003c\/strong\u003e, not the smell. Organic residue in grout, floor junctions and under fittings is what produces washroom odour; digesting it is a different and more durable approach than masking it with fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleans, refreshes and removes organic waste\u003c\/strong\u003e across hard surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-resoiling technology\u003c\/strong\u003e — surfaces resist dirt after cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGECA certified\u003c\/strong\u003e — Good Environmental Choice Australia licence ACT-2024, current until 10 June 2027.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentrated\u003c\/strong\u003e — runs from 1:4 down to 1:80 depending on the task.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA note on what we do and do not claim\u003c\/h3\u003e\n\u003cp\u003eThis listing previously described \u003cstrong\u003e“antimicrobial action”\u003c\/strong\u003e, \u003cstrong\u003e“powerful germ-killing action”\u003c\/strong\u003e, and said the enzymes \u003cstrong\u003e“prevent bacteria from growing”\u003c\/strong\u003e. \u003cstrong\u003eWe have removed that wording.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAntimicrobial and germ-kill claims are regulated in Australia, and we can find no ARTG or APVMA listing for this product. \u003cstrong\u003eEnzymes digest organic matter — they are not a biocide\u003c\/strong\u003e, and removing the organic matter bacteria feed on is a genuinely useful thing that is not the same as killing bacteria. The product does the first; we are not able to evidence the second. We have asked Actichem whether a listing exists.\u003c\/p\u003e\n\u003cp\u003eThe GECA environmental certification is a separate matter and stands — it is an independently audited environmental claim, not a health claim.\u003c\/p\u003e\n\u003cp\u003eWe have also softened \u003cstrong\u003e“non-toxic for the environment”\u003c\/strong\u003e. It is septic safe and GECA certified, which are the accurate claims. The concentrate is a classified hazardous chemical — see the safety section.\u003c\/p\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eAll hard surfaces including walls and floors. Suited to a spray bottle or a mop bucket.\u003c\/p\u003e\n\u003cp\u003eRegular use reduces the need for harsh deep-cleaning chemicals — which is the real economic argument for an enzyme product. Keeping organic load down continuously means you are not periodically reaching for something like \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-surface-clean-hd-5-ltr\"\u003eSurface Clean HD\u003c\/a\u003e at pH 12.9.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeavily soiled surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:4 (200 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLightly soiled surfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:9 (100 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor mopping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:50 (20 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAutoscrubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:80 (12.5 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eKitchens and washrooms\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDilute \u003cstrong\u003e1:9\u003c\/strong\u003e for general cleaning.\u003c\/li\u003e\n\u003cli\u003eApply with a spray bottle or scourer sponge.\u003c\/li\u003e\n\u003cli\u003eWipe or rinse with clean water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow 10 minutes dwell\u003c\/strong\u003e where thorough cleaning of organic load is required. Enzymes work on contact time — wiping immediately gives you the surfactant performance and none of the enzyme benefit you are paying for.\u003c\/li\u003e\n\u003cli\u003eUse \u003cstrong\u003e1:50\u003c\/strong\u003e for mopping floor tiles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHousekeeping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:9\u003c\/strong\u003e for general spray-and-wipe tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:50\u003c\/strong\u003e for floor mopping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGetting the best from an enzyme product\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not mix it with a disinfectant or bleach.\u003c\/strong\u003e Enzymes are proteins; oxidisers and strong biocides denature them. You will have paid for enzyme technology and switched it off in the bucket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use very hot water.\u003c\/strong\u003e Heat denatures enzymes. Warm is fine; boiling is not.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGive it dwell time.\u003c\/strong\u003e This is the single biggest factor in whether the product performs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety profile: Non-hazardous”. That was wrong\u003c\/strong\u003e and has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for RG755, version 1.1 issued 12 August 2021, classifies Spray \u0026amp; Wipe as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage (Category 1)\u003c\/li\u003e\n\u003cli\u003eNo poisons schedule. Not a dangerous good. pH 8.5–8.8.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H318 — serious eye damage\u003c\/h3\u003e\n\u003cp\u003eThe highest eye classification in the GHS system. \u003cstrong\u003eDamage, not irritation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote the pH: 8.5 to 8.8, barely above neutral.\u003c\/strong\u003e That is worth pausing on, because it demonstrates something important — \u003cstrong\u003epH is not a proxy for hazard.\u003c\/strong\u003e A near-neutral product can carry the most serious eye classification, because surfactants damage the eye by a different mechanism than acids and alkalis. Anyone judging risk by pH alone will get this one wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles when decanting or diluting the concentrate.\u003c\/strong\u003e Working solution at 1:9 to 1:80 is a very different proposition, but people are injured by concentrates.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eActichem’s sheet notes incompatibility with \u003cstrong\u003emetal containers\u003c\/strong\u003e — store and decant into polyethylene or polypropylene only.\u003c\/p\u003e\n\u003cp\u003eAs a working rule, and for performance reasons as much as safety: \u003cstrong\u003edo not mix it with anything.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with water, holding the eyelids apart. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Flush with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Do not induce vomiting. Give water and seek medical advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG755.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eConcentrated enzyme and surfactant multi-surface cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear green liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eFresh floral \/ crisp lime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:4 to 1:80 depending on task — see table above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.5 – 8.8\u003c\/strong\u003e (Actichem SDS). This listing previously stated 9.5; we have asked Actichem to confirm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eEthanol (CAS 64-17-5) under 10%; sodium lauryl ether sulphate (CAS 68585-34-2) under 10%; proprietary surfactant and chelating agent under 10% each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eGECA certified\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eMetal containers — store in polyethylene or polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 12 August 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the right hard surface cleaner\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-surface-clean-hd-5-ltr\"\u003e\u003cstrong\u003eSurface Clean HD\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 12.9, \u003cstrong\u003ecorrosive\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eHeavy grease and oil. Not for stone, marble or coated floors.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSpray n Wipe\u003c\/strong\u003e (this product)\u003c\/td\u003e\n\u003ctd\u003epH 8.6, DANGER (H318)\u003c\/td\u003e\n\u003ctd\u003eGeneral washroom, kitchen and housekeeping. \u003cstrong\u003eEnzyme action on organic load and odour.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-neutral-detergent-5-ltr\"\u003e\u003cstrong\u003eNeutral Detergent\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 8.6, DANGER (H318)\u003c\/td\u003e\n\u003ctd\u003eGeneral purpose cleaning without the enzyme component.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003e\u003cstrong\u003eProNeutro\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 7–8, \u003cstrong\u003enon-hazardous\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eStone, marble, timber and coated floors.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202108-Actichem-Spray-n-Wipe-RG755.pdf\"\u003eActichem Spray n Wipe safety data sheet (RG755, version 1.1, 12 August 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG755.05\u003c\/p\u003e\n\u003cp\u003eSetting up a washroom cleaning regime and weighing an enzyme product against a conventional one? Talk to us. Enzymes are the better long-term answer to recurring odour, but only if the dwell time and the dilution are right.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eSpray n Wipe is listed as RG755 on Good Environmental Choice Australia licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, issued to Actichem Pty Ltd on 22 November 2024 against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas and the licence is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e. The certificate covers both the concentrate (RG755) and the ready-to-use form (RG755RTU).\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, so the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a tender requirement. Read the certificate in full as \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e, or contact us for a copy for tender documentation.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44285650534613,"sku":"RG755.05","price":77.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Spray-n-Wipe-5-ltr.jpg?v=1780551515"},{"product_id":"actichem-mould-remover-5-ltr","title":"Actichem Mould Remover 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Mould Remover is a peroxide-based product for removing mould and mildew and the staining they leave behind, formulated for washrooms, change rooms and locker rooms.\u003c\/p\u003e\n\u003cp\u003eIts main practical advantage is what it is \u003cstrong\u003enot\u003c\/strong\u003e: it is not a hypochlorite bleach. That matters more than it sounds — see below.\u003c\/p\u003e\n\u003ch2\u003ePeroxide, not bleach — and why that matters\u003c\/h2\u003e\n\u003cp\u003eMost mould products reach for \u003cstrong\u003esodium hypochlorite\u003c\/strong\u003e. Actichem Mould Remover uses \u003cstrong\u003ehydrogen peroxide\u003c\/strong\u003e (under 5%) instead. Three practical consequences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is safe on natural stone.\u003c\/strong\u003e This is the big one. Bathrooms are full of marble, limestone and travertine, and hypochlorite products — usually strongly alkaline — are a poor match for them. Mould Remover is mildly acidic and does not carry that risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt does not produce chlorine odour\u003c\/strong\u003e, which is the usual complaint after a bathroom mould treatment in an occupied building.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt will not form chloramine gas\u003c\/strong\u003e if it meets an ammoniated cleaner. Bathrooms are exactly where that accident happens, because ammoniated glass and washroom cleaners live in the same trolley as bleach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThat last point is a genuine safety advantage over a bleach-based mould product.\u003c\/strong\u003e It does not mean you should mix it with anything — see the safety section — but it removes one of the more common ways cleaners are injured.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRemoves mould, mildew and the staining they leave.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast\u003c\/strong\u003e — 60 seconds minimum dwell, with longer dwell for stubborn staining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe on natural stone\u003c\/strong\u003e — unlike most hypochlorite mould products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for hard surfaces\u003c\/strong\u003e in washrooms, laundries and kitchens.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNon-flammable.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA note on what we do and do not claim\u003c\/h3\u003e\n\u003cp\u003eThis listing previously described Mould Remover as leaving surfaces \u003cstrong\u003e“germ-free”\u003c\/strong\u003e, as a \u003cstrong\u003e“high-performance sanitiser”\u003c\/strong\u003e, and as providing \u003cstrong\u003e“sanitisation”\u003c\/strong\u003e. \u003cstrong\u003eWe have removed that wording.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTerms like sanitiser, disinfectant and germ-free are regulated in Australia, and we can find no ARTG or APVMA listing for this product. Hydrogen peroxide is a genuine and effective oxidiser against mould and organic contamination — that much is chemistry, and the product does what it says on mould — but \u003cstrong\u003ewe are not prepared to make a regulated efficacy claim we cannot evidence.\u003c\/strong\u003e We have asked Actichem whether a listing exists. If one does, we will publish it and quote the number.\u003c\/p\u003e\n\u003cp\u003eThe existing caveat on this page remains true and is worth repeating: \u003cstrong\u003ethis product is not suitable for use as a disinfectant in medical institutions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable for most hard surfaces in washrooms, laundries and kitchens, \u003cstrong\u003eincluding natural stone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlways pre-test sensitive substrates\u003c\/strong\u003e for chemical sensitivity, and pre-test for colour loss before use on delicate fibres.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use.\u003c\/strong\u003e Pre-test in an inconspicuous location.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cp\u003eReady to use. \u003cstrong\u003eDo not dilute. Do not mix with any other cleaning solution.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-clean and remove organic load first.\u003c\/strong\u003e This is the step that determines the result. Peroxide is consumed by whatever organic matter it meets, so applying it over soap scum and body soil spends the active on the soil rather than the mould.\u003c\/li\u003e\n\u003cli\u003eApply with a sprayer or sponge.\u003c\/li\u003e\n\u003cli\u003eAgitate and allow \u003cstrong\u003e60 seconds minimum dwell time.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRinse the surface with clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat for areas of high organic load. Stubborn mould staining may need additional dwell and agitation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e⚠ Removing mould is not the same as fixing mould\u003c\/h3\u003e\n\u003cp\u003eWorth saying to the customer, because it prevents the callback: \u003cstrong\u003emould grows where there is moisture.\u003c\/strong\u003e Cleaning it off treats the symptom. If the ventilation, the leak or the condensation problem is not addressed, it returns — usually within weeks in a bathroom.\u003c\/p\u003e\n\u003cp\u003eWhere mould is extensive, recurring, or in a residential property following water damage, it is a \u003cstrong\u003eremediation\u003c\/strong\u003e job with an assessment and a moisture strategy, not a cleaning job with a stronger product.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety profile: Non-hazardous”. That was wrong\u003c\/strong\u003e and has been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for RG615, version 1.1 issued 9 August 2021, classifies Mould Remover as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e and \u003cstrong\u003ePoisons Schedule 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage (Eye Damage Category 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation (Skin Corrosion\/Irritation Category 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoisons Schedule 5\u003c\/strong\u003e | not a dangerous good\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H318 — serious eye damage\u003c\/h3\u003e\n\u003cp\u003eThe highest eye classification in the GHS system. \u003cstrong\u003eDamage, not irritation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is \u003cstrong\u003esprayed, in bathrooms, often at or above head height\u003c\/strong\u003e, at surfaces that are frequently tiled and reflective. That is the geometry most likely to put product in an eye, and it is why \u003cstrong\u003echemical goggles are the right protection here, not safety glasses.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf it gets in an eye, wash out immediately with fresh running water for \u003cstrong\u003e10 to 15 minutes\u003c\/strong\u003e and seek medical attention.\u003c\/p\u003e\n\u003ch3\u003e⚠ Poisons Schedule 5\u003c\/h3\u003e\n\u003cp\u003eSchedule 5 brings labelling and storage obligations. Keep it in its original labelled container, store it securely away from food and out of reach of children, and do not decant it into an unlabelled bottle. \u003cstrong\u003eIn a domestic bathroom that last point is not theoretical.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e⚠ Do not mix it with anything\u003c\/h3\u003e\n\u003cp\u003eActichem’s sheet records incompatible materials as \u003cstrong\u003e“none known”\u003c\/strong\u003e. We do not think that is complete for a peroxide product, and we have raised it with them. As a working rule:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever mix it with a hypochlorite or bleach product.\u003c\/strong\u003e Even though this product is not itself a bleach, adding it to one is not something to experiment with in a small enclosed bathroom.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNever mix it with an ammoniated cleaner.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not seal it in a non-vented container.\u003c\/strong\u003e Peroxide solutions decompose slowly and release oxygen, which builds pressure in a sealed vessel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation and personal protective equipment\u003c\/h3\u003e\n\u003cp\u003eBathrooms are small, enclosed and poorly ventilated by design. \u003cstrong\u003eRun the exhaust fan and open a window before you start\u003c\/strong\u003e, not after the smell becomes noticeable. Chemical goggles and protective clothing.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water for 10 to 15 minutes. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately remove contaminated clothing and flush with water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInhalation.\u003c\/strong\u003e Remove from the contaminated area to fresh air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Immediately give a glass of water. Seek medical advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG615.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003ePeroxide-based mould and mildew remover for hard surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear colourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eMild chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use — do not dilute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4 – 6\u003c\/strong\u003e (Actichem SDS) — mildly acidic, which is what makes it safe on natural stone. This listing previously stated 7; we have asked Actichem to confirm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eHydrogen peroxide under 5%; remaining components declared trade secret\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot suitable for\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUse as a disinfectant in medical institutions\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 9 August 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-surface-clean-hd-5-ltr\"\u003eActichem Surface Clean HD\u003c\/a\u003e — heavy duty alkaline hard surface cleaner for pre-cleaning organic load. \u003cstrong\u003eDo not mix the two\u003c\/strong\u003e — use them as separate steps with a rinse between.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-spray-n-wipe-5-ltr\"\u003eActichem Spray n Wipe\u003c\/a\u003e — general washroom and hard surface cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202111-Actichem-Mould-Remover-RG615.pdf\"\u003eActichem Mould Remover safety data sheet (RG615, version 1.1, 9 August 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG615.05\u003c\/p\u003e\n\u003cp\u003eDealing with recurring mould rather than surface mould? Talk to us. Extensive or repeat mould, particularly after water damage, needs a moisture assessment and a remediation approach — and we would rather point you at the right process than sell you product that will not fix it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44285650567381,"sku":"RG615.05","price":46.86,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Mould-Remover-5-ltr.jpg?v=1780551517"},{"product_id":"actichem-neutral-detergent-5-ltr","title":"Actichem Neutral Detergent 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Neutral Detergent is a near-neutral detergent cleaner for removing soil from \u003cstrong\u003epH-sensitive surfaces\u003c\/strong\u003e — fine stone, timber and polymer-coated flooring. It uses nanosurfactant technology to clean without leaving haziness, streaking or slippery residue.\u003c\/p\u003e\n\u003ch2\u003e⚠ Neutral Detergent or ProNeutro? Read this before you order\u003c\/h2\u003e\n\u003cp\u003eCCW carries two products in this category with very similar descriptions, and until now it has been almost impossible to tell them apart from their pages. \u003cstrong\u003eThey are not the same, and the difference matters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNeutral Detergent\u003c\/strong\u003e (this product, RG667)\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003e\u003cstrong\u003eProNeutro\u003c\/strong\u003e\u003c\/a\u003e (AP662)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e8.5 – 8.8\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e7 – 8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER — H318, serious eye damage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNon-hazardous\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eGeneral hard floor maintenance\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eStone, marble, timber and coated floors\u003c\/strong\u003e, and sites where cleaning staff rather than trained technicians handle the concentrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eWhere the surface is genuinely pH-sensitive, or where the concentrate will be handled daily by general cleaning staff, ProNeutro is the better choice\u003c\/strong\u003e — it is closer to neutral and it is not a classified hazardous chemical. Neutral Detergent is a capable maintenance cleaner, but it is the higher-hazard of the two and it is not as close to neutral as its name suggests.\u003c\/p\u003e\n\u003cp\u003eWe are pointing this out rather than leaving you to work it out from two nearly identical pages, because that is what these pages used to do.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical\u003c\/strong\u003e — dilutes to very low rates. See the dilution table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast on oily soil\u003c\/strong\u003e — nanosurfactant technology emulsifies oily soil quickly, which suits autoscrubber work where dwell time is measured in seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow residue\u003c\/strong\u003e — no streaks, haziness or slippery residue. Residue build-up is itself a slip hazard on polished floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits pH-sensitive substrates\u003c\/strong\u003e — fine natural stone, marble, polymer-coated flooring and timber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA note on wording we have removed\u003c\/h3\u003e\n\u003cp\u003eThis listing previously described a \u003cstrong\u003e“totally non-toxic hazard rating”\u003c\/strong\u003e and said the product is \u003cstrong\u003e“totally safe”\u003c\/strong\u003e on fine surfaces. We have changed both.\u003c\/p\u003e\n\u003cp\u003eThe product is a \u003cstrong\u003eclassified hazardous chemical\u003c\/strong\u003e — see the safety section. It is genuinely suitable for pH-sensitive surfaces, and that claim stands. But “totally safe” and “non-toxic” are not statements the safety data sheet supports, and we would rather be precise than enthusiastic.\u003c\/p\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eMaintenance and medium-duty cleaning of granite, marble, limestone, engineered stone, acrylic polymer-coated flooring, timber flooring and other pH-sensitive surfaces.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use.\u003c\/strong\u003e Always pre-test the cleaning solution on the surface to be cleaned.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor cleaning — mop and bucket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:50 (20 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor cleaning — autoscrubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:150 (7 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray and wipe — heavy duty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:80 (15 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray and wipe — general\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:100 (10 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressure washing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:100 (10 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eOver-dosing is the most common mistake with a low-residue product\u003c\/strong\u003e, and it is counterproductive: excess surfactant is exactly what leaves the film and streaking the product is formulated to avoid. Use a dosing system or pre-marked measures rather than a free pour.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply with a clean cloth or mop, or through an autoscrubber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinsing is not generally required\u003c\/strong\u003e unless a strong dilution has been used.\u003c\/li\u003e\n\u003cli\u003eKeep the container closed for maximum performance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety profile: Non-hazardous” and a pH of 7. Both were wrong\u003c\/strong\u003e and have been corrected.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for RG667, version 1.1 issued 12 August 2021, classifies Neutral Detergent as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage (Category 1)\u003c\/li\u003e\n\u003cli\u003eNo poisons schedule. Not a dangerous good. pH 8.5–8.8.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H318 — serious eye damage\u003c\/h3\u003e\n\u003cp\u003eThe highest eye classification in the GHS system. \u003cstrong\u003eDamage, not irritation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote the pH: 8.5 to 8.8, barely above neutral.\u003c\/strong\u003e This product is the clearest demonstration in our range that \u003cstrong\u003epH is not a proxy for hazard.\u003c\/strong\u003e A near-neutral product can carry the most serious eye classification, because surfactants damage the eye by a different mechanism than acids and alkalis do. A technician who judges risk by pH — or by the word “neutral” in the product name — will get this one wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles when decanting or diluting the concentrate.\u003c\/strong\u003e Working solution at 1:50 to 1:150 is a very different proposition, but people are injured by concentrates, not by working solutions.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eActichem’s sheet notes incompatibility with \u003cstrong\u003emetal containers\u003c\/strong\u003e — store and decant into polyethylene or polypropylene only. Do not mix it with anything else.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with water, holding the eyelids apart. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Flush with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Do not induce vomiting. Give water and seek medical advice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG667.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eNear-neutral maintenance detergent for pH-sensitive surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear blue liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eFresh citrus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:150 depending on method — see table above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e8.5 – 8.8\u003c\/strong\u003e (Actichem SDS). This listing previously stated 7; we have asked Actichem to confirm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eProprietary surfactants and chelating agent, each under 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eMetal containers — store in polyethylene or polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 12 August 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the right hard surface cleaner\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-surface-clean-hd-5-ltr\"\u003e\u003cstrong\u003eSurface Clean HD\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 12.9, \u003cstrong\u003ecorrosive\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eHeavy grease and oil. Not for stone, marble or coated floors.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-spray-n-wipe-5-ltr\"\u003e\u003cstrong\u003eSpray n Wipe\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 8.6, DANGER (H318)\u003c\/td\u003e\n\u003ctd\u003eWashroom and kitchen. Enzyme action on organic load and odour.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNeutral Detergent\u003c\/strong\u003e (this product)\u003c\/td\u003e\n\u003ctd\u003epH 8.6, DANGER (H318)\u003c\/td\u003e\n\u003ctd\u003eGeneral hard floor maintenance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003e\u003cstrong\u003eProNeutro\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 7–8, \u003cstrong\u003enon-hazardous\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eStone, marble, timber and coated floors.\u003c\/strong\u003e The lower-hazard choice.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202108-Actichem-Neutral-Detergent-RG667.pdf\"\u003eActichem Neutral Detergent safety data sheet (RG667, version 1.1, 12 August 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG667.05\u003c\/p\u003e\n\u003cp\u003eNot sure whether Neutral Detergent or ProNeutro suits your site? Tell us the floor type and who will be handling the concentrate. On a stone or coated floor with in-house cleaning staff, ProNeutro is usually the better answer — and we would rather say so than sell you the other one.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eNeutral Detergent (RG667) is certified by \u003cstrong\u003eGood Environmental Choice Australia\u003c\/strong\u003e under licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas. The licence was issued on 22 November 2024 and is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a requirement in government and commercial tenders rather than a preference.\u003c\/p\u003e\n\u003cp\u003eThe certificate listing this product is published by GECA and can be read in full at \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. If your tender requires a copy, contact us and we will supply it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44285650600149,"sku":"RG667.05","price":61.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Neutral-Detergent-5-ltr.jpg?v=1780551518"},{"product_id":"actichem-tile-grout-cleaner-lf-15-ltr","title":"Actichem Tile \u0026 Grout Cleaner LF 15 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Tile \u0026amp; Grout Cleaner LF uses cutting-edge technology to simplify and enhance the effectiveness of your tile and hard-surface cleaning operations. It is designed for use with hard surface cleaning equipment. The significant difference with this product is that it is \u003cstrong\u003eultra-low-foaming\u003c\/strong\u003e. Formulated with nano surfactant chemistry for penetration and soil release, it gives the professional cleaner an alkaline cleaning solution that delivers dependable results every time.\u003c\/p\u003e\n\u003cp\u003eThis 15 litre pack is the production size for contractors running machines daily. \u003cstrong\u003eActichem Tile \u0026amp; Grout Cleaner LF replaces Tile \u0026amp; Grout Cleaner Pro.\u003c\/strong\u003e Where older method sheets — including Actichem’s own — specify “T\u0026amp;G Cleaner Pro” as the neutralising rinse after acid restoration, LF is the current product.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional choice\u003c\/strong\u003e — removes grime with ease. Suitable for use on all tile, stone, concrete and grout surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low foaming\u003c\/strong\u003e — keeps foam to a minimum through hard-surface cleaning machines, protecting vacuum motors from being flooded out. This is the single practical reason to choose LF over a general alkaline cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart cleaning power\u003c\/strong\u003e — innovative cleaning chemistry for soils, grease, fats and general grime build-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTile smart\u003c\/strong\u003e — the chemistry provides a “minimum residue” clean, preventing discolouration caused by residue build-up on tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot classified as dangerous goods\u003c\/strong\u003e — which makes it simpler and cheaper to transport than a Class 8 product, and matters more at 15 litres. Note that this is a transport benefit only; see Safety below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable for use on all man-made tiles, natural stone products, clay products, concrete and grout. \u003cstrong\u003eAvoid contact with non-ferrous metals, plated metals, painted surfaces, and flooring coated with an acrylic polymer or wax.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIdeal anywhere there are dirty tiles, concrete, stone or resilient flooring. Especially good in kitchens, dining areas, malls and large commercial areas, and for the maintenance and cleaning of commercial and public areas.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the SDS before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty applications\u003c\/strong\u003e — 1 part Tile \u0026amp; Grout Cleaner LF to 4 to 9 parts water. Hot water will enhance the chemical action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard cleaning applications\u003c\/strong\u003e — 1 part to 50 to 100 parts water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs a neutralising rinse after acid restoration\u003c\/strong\u003e — 1:300 (30 ml per 10 litres).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication — heavy duty\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution with a clean mop and bucket, an auto-scrubber, or a rotary scrubber solution tank. Apply to a limited area at a time. Do not allow the solution to dry.\u003c\/li\u003e\n\u003cli\u003eScrub thoroughly with an applicable nylon scouring floor pad or brush.\u003c\/li\u003e\n\u003cli\u003eAllow 10 to 30 minutes dwell time and re-agitate areas of stubborn soiling.\u003c\/li\u003e\n\u003cli\u003eExtract or pick up the resultant slurry with professional tile extraction equipment and rinse thoroughly with clear water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eApplication — maintenance\u003c\/h3\u003e\n\u003cp\u003eFollow standard cleaning techniques. No clear water rinse is needed when using at 1:100. Ideal through auto-scrubbers and similar equipment.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before.\u003c\/strong\u003e Earlier versions of this page recorded the safety profile as non-hazardous, and stated that because the product is not classified as dangerous goods it is “substantially safer in use and in transport”. \u003cstrong\u003eThe transport half of that is right. The use half is not, and we have corrected it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e“Hazardous chemical” and “dangerous goods” are two separate determinations. A product can be perfectly ordinary to freight and still burn your eyes. Tile \u0026amp; Grout Cleaner LF is one of those.\u003c\/p\u003e\n\u003cp\u003eIt is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the Model WHS Regulations, and it is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 2; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e12.8\u003c\/strong\u003e — our page previously said 12\u003c\/li\u003e\n\u003cli\u003eActives: ethylene glycol monobutyl ether 10 to less than 30%; potassium hydroxide, sodium metasilicate pentahydrate, monoethanolamine, EDTA tetrasodium salt, potassium pyrophosphate and two proprietary surfactants, each below 10%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOn “mildly alkaline”.\u003c\/strong\u003e pH 12.8 is not mild. It is roughly one pH unit — a factor of ten in hydroxide concentration — below \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-15-ltr\"\u003eTile \u0026amp; Grout Power\u003c\/a\u003e, which is a Class 8 corrosive. LF is genuinely gentler than Power on substrates and does not carry H314, but the concentrate still causes serious eye damage. It is the diluted working solution that is mild, not the drum.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies chemical goggles, elbow-length gloves, overalls and a PVC apron. \u003cstrong\u003eThe glove materials named are butyl, PE, EVAL and PE\/Saranex 23 — nitrile is not among them\u003c\/strong\u003e, which is worth knowing given the glycol ether content. Decanting from a 15 litre drum into a solution tank is when concentrate splashes; wear the goggles for it.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and immediately call a Poisons Information Centre or doctor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and wash with soap and water. Seek medical attention if irritation occurs.\u003c\/p\u003e\n\u003ch2\u003eMixing and Compatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIncompatible with strong acids and oxidising agents.\u003c\/strong\u003e This matters here more than usual, because LF is the product specified as the \u003cem\u003eneutralising rinse\u003c\/em\u003e after acid restoration — so acid and alkali are deliberately brought together on the same job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThat is safe at 1:300. It is not safe at concentration.\u003c\/strong\u003e Neutralisation releases heat, and a strong acid meeting a strong alkali in a bucket can boil and spit. Always dilute LF to 1:300 with water first, then apply it to the rinsed floor. Never pour concentrate onto spilled or undiluted acid product.\u003c\/p\u003e\n\u003cp\u003eThe acid products this applies to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-15-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-15-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-15ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eActichem Crete Clean\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eActichem Rust Remover\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso avoid contact with non-ferrous and plated metals — alkali attacks aluminium and the reaction produces hydrogen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP167.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eMauve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eSandalwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e12.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoam\u003c\/td\u003e\n\u003ctd\u003eUltra-low — suitable for auto-scrubbers and extraction equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — heavy duty\u003c\/td\u003e\n\u003ctd\u003e1:4 to 1:9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — standard\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — neutralising rinse\u003c\/td\u003e\n\u003ctd\u003e1:300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 to 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eStrong acids, oxidising agents, non-ferrous and plated metals, painted surfaces, acrylic polymer or wax coatings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 11 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing Between the Hard Floor Chemicals\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF 5 Ltr\u003c\/a\u003e — the same product in the smaller pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-15-ltr\"\u003eActichem Tile \u0026amp; Grout Power\u003c\/a\u003e — pH 14, Class 8 corrosive. Step up to this only when LF will not shift heavy grease, oil or carbon.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-15-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e — acid, for mineral scale, cement smear and efflorescence. Alkaline cleaners will not touch those.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-15-ltr\"\u003eActichem Proneutro\u003c\/a\u003e — the alternative neutralising rinse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe short version:\u003c\/strong\u003e LF is the everyday machine cleaner and the neutralising rinse. Power is the heavy hitter. The restorers are for scale and cement, not grease.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem--TG-Cleaner-LF-AP167.pdf\"\u003eActichem Tile \u0026amp; Grout Cleaner LF Safety Data Sheet — version 2.3, issued 11 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP167.15\u003c\/p\u003e\n\u003cp\u003eRunning LF through an auto-scrubber for the first time, or unsure which dilution suits your machine and soil load? Contact Carpet Cleaners Warehouse — getting the ratio right is the difference between a clean floor and a residue problem.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15LTR","offer_id":44285650698453,"sku":"AP167.15","price":199.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Tile-Grout-Cleaner-LF-15-ltr.jpg?v=1780551519"},{"product_id":"actichem-bathroom-cleaner-5-ltr","title":"Actichem Bathroom Cleaner 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Responsibly Green Bathroom Cleaner is designed for use on all washroom surfaces, including walls, floors and bathroom fittings. It incorporates enzyme and anti-resoiling technology to keep surfaces clean and repel dirt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is the mildly alkaline member of the washroom range\u003c\/strong\u003e, at pH 8.5 to 8.8. Its acid siblings — \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-toilet-bowl-cleaner-5-ltr\"\u003eToilet Bowl Cleaner\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-shower-cleaner-5-ltr\"\u003eShower Cleaner\u003c\/a\u003e — sit at pH 2 to 3 and are the ones to reach for on limescale. Bathroom Cleaner is the everyday maintenance product, and regular use reduces how often you need the harsh, deep-cleaning acids at all.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBoosted with Elimotech enzyme technology to continue cleaning after your work is done.\u003c\/li\u003e\n\u003cli\u003eCleans, refreshes and eliminates organic waste.\u003c\/li\u003e\n\u003cli\u003eDigests organic matter at the source.\u003c\/li\u003e\n\u003cli\u003eDestroys bad odours.\u003c\/li\u003e\n\u003cli\u003eAnti-resoiling technology means surfaces repel dirt.\u003c\/li\u003e\n\u003cli\u003eContains no phosphates.\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly — part of Actichem’s Responsibly Green range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh performance chemistry\u003c\/strong\u003e — quickly and easily breaks down soap scum, limescale and general grime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMould control\u003c\/strong\u003e — regular use suppresses mould growth, discourages regrowth and destroys odour-causing germs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal for every bathroom surface, including walls and floors. Suited for use undiluted or mixed with water in a spray bottle or mop bucket.\u003c\/p\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eSuitable on all bathroom surfaces, including walls, floors, chrome and glass. Being mildly alkaline rather than acidic, it is also the safer choice around natural stone and polished surfaces, where the acid washroom products would etch.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the SDS before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightly soiled surfaces\u003c\/strong\u003e — 1:150 (6 ml per litre)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavily soiled surfaces\u003c\/strong\u003e — 1:100 (10 ml per litre)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToilet bowls, urinals and tough stains\u003c\/strong\u003e — undiluted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eToilet bowls and urinals:\u003c\/strong\u003e squirt directly under the rim or into the urinal so as to cover the entire bowl. Agitate with a toilet brush and flush. Stubborn stains may require 5 to 10 minutes dwell time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShowers, toilets, basins:\u003c\/strong\u003e spray directly onto the area to be cleaned, or apply to a sponge or scourer pad first. Spread and agitate, then rinse with clear water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloors and walls:\u003c\/strong\u003e apply the solution with a clean mop, cloth or sponge. Agitate and allow dwell time for stubborn soils. Rinse with clear water.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page recorded the safety profile as non-hazardous. That was wrong, and we have corrected it against the Safety Data Sheet.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBathroom Cleaner is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the Model WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods and carries no poisons schedule.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH317\u003c\/strong\u003e — may cause an allergic skin reaction\u003c\/li\u003e\n\u003cli\u003eGHS: Serious Eye Damage Category 1; \u003cstrong\u003eSkin Sensitisation Category 1A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e8.5 to 8.8\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: a proprietary additive, a proprietary surfactant, a proprietary chelating agent and a \u003cstrong\u003eproprietary bacterial enzyme\u003c\/strong\u003e — each below 10%\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🔴 H317 is the one to take seriously here\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSkin Sensitisation Category 1A is the strongest sensitisation category\u003c\/strong\u003e, and it behaves differently from ordinary irritation. An irritant hurts the first time. A sensitiser usually does not — it quietly builds an immune response over months or years of contact, and then one day the same product that never bothered you produces dermatitis that will recur every time you touch it afterwards.\u003c\/p\u003e\n\u003cp\u003eThat matters more for this product than for almost anything else in the range, because \u003cstrong\u003ethis is a daily-use washroom cleaner that the method above tells you to apply undiluted, by hand, into toilet bowls\u003c\/strong\u003e. The people most at risk are the ones who have used it longest without gloves.\u003c\/p\u003e\n\u003cp\u003eThe enzyme content is the most likely reason for the classification — proteolytic enzymes are well-recognised respiratory and skin sensitisers in the cleaning industry. \u003cstrong\u003eWear gloves every time, not just on the heavy jobs.\u003c\/strong\u003e If a cleaner in your team has developed hand dermatitis, this is a product worth reviewing with their doctor.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies elbow-length chemical protective gloves — neoprene or butyl recommended — safety glasses with side shields or chemical goggles, barrier cream and access to an eye wash unit. H318 means undiluted product in the eye can cause permanent damage, and squirting under a toilet rim is a splash-back geometry.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water, holding the eyelids apart. Seek medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing and wash thoroughly with soap and water. \u003cstrong\u003eIf a rash, redness or itching develops, stop using the product and seek medical advice\u003c\/strong\u003e — with a Category 1A sensitiser, an early reaction is a warning worth acting on.\u003c\/p\u003e\n\u003ch2\u003eMixing\u003c\/h2\u003e\n\u003cp\u003eThe SDS lists no known incompatible materials. Two practical rules still apply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever mix with an acid washroom cleaner.\u003c\/strong\u003e Bathroom Cleaner is alkaline; \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-toilet-bowl-cleaner-5-ltr\"\u003eToilet Bowl Cleaner\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-shower-cleaner-5-ltr\"\u003eShower Cleaner\u003c\/a\u003e are pH 2 to 3. Mixing them neutralises both and wastes the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever mix with bleach.\u003c\/strong\u003e Hypochlorite destroys the enzyme package, and in a washroom the acid-plus-bleach chlorine gas risk is always one bottle away. Rinse between products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres (also available as a 750 ml applicator bottle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eDeep blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eApple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e8.5 to 8.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — light soiling\u003c\/td\u003e\n\u003ctd\u003e1:150 (6 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — heavy soiling\u003c\/td\u003e\n\u003ctd\u003e1:100 (10 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — toilet bowls, urinals, tough stains\u003c\/td\u003e\n\u003ctd\u003eUndiluted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e5 to 10 minutes on stubborn stains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhosphates\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH318, H317\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 11 August 2021 — the most recent version Actichem publish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-toilet-bowl-cleaner-5-ltr\"\u003eActichem Toilet Bowl Cleaner\u003c\/a\u003e — acidic, pH 2 to 3, for descaling the pan and urinals\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-shower-cleaner-5-ltr\"\u003eActichem Shower Cleaner\u003c\/a\u003e — acidic, for soap scum and hard-water film in the recess\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e — for scale and efflorescence beyond what a washroom cleaner will shift\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e — TGA-listed hospital grade disinfectant, where a listing is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202108-Actichem-Bathroom-Cleaner-RG710.pdf\"\u003eActichem Bathroom Cleaner Safety Data Sheet — version 1.1, issued 11 August 2021\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP710.05\u003c\/p\u003e\n\u003cp\u003eBuilding a washroom programme and not sure which of the three products does which job? Contact Carpet Cleaners Warehouse. In short: Bathroom Cleaner for daily maintenance, the acids for descaling, and a listed disinfectant where the scope calls for one.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eBathroom Cleaner (RG710) is certified by \u003cstrong\u003eGood Environmental Choice Australia\u003c\/strong\u003e under licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas. The licence was issued on 22 November 2024 and is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a requirement in government and commercial tenders rather than a preference.\u003c\/p\u003e\n\u003cp\u003eThe certificate listing this product is published by GECA and can be read in full at \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. If your tender requires a copy, contact us and we will supply it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286072848597,"sku":"RG710.05","price":83.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Bathroom-Cleaner-5-ltr.jpg?v=1780551520"},{"product_id":"actichem-shower-cleaner-5-ltr","title":"Actichem Shower Cleaner 5 ltr","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Responsibly Green Shower Cleaner is designed to be the most effective and versatile product of its kind. Its powerful cleaning action comes from naturally derived organic acids, which makes it a strong choice for sports change rooms and locker rooms in corporate buildings, while the fresh fragrance makes it an attractive option for household shower cleaning.\u003c\/p\u003e\n\u003cp\u003eThe acid system is \u003cstrong\u003eglycolic and citric acid\u003c\/strong\u003e rather than hydrochloric or phosphoric — a real advantage for the operator and for chrome, glass and grout. \u003cstrong\u003eIt does not make the product mild.\u003c\/strong\u003e See Safety below.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful cleaning action that removes soap scum, hard-water stains, biological growth and body fats fast and effectively.\u003c\/li\u003e\n\u003cli\u003eBoosted with enzyme-based odour control to destroy odours in the shower and even in drains.\u003c\/li\u003e\n\u003cli\u003eAnti-resoiling technology means shower surfaces repel dirt, making them easier to keep clean.\u003c\/li\u003e\n\u003cli\u003eEnvironmentally friendly — part of Actichem’s Responsibly Green range.\u003c\/li\u003e\n\u003cli\u003eSeptic safe.\u003c\/li\u003e\n\u003cli\u003eLeaves the shower with a fresh, clean fragrance.\u003c\/li\u003e\n\u003cli\u003eLeaves shower fittings gleaming and spot-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eIdeally suited for cleaning all shower surfaces, including tiles, glass, tapware and grout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use on acid-sensitive surfaces.\u003c\/strong\u003e At pH 2 to 3 this product will etch marble, limestone, travertine and polished natural stone. Shower recesses increasingly use stone and engineered stone — identify the surface before you spray, and pre-test in an inconspicuous location every time.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the SDS before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight soiling\u003c\/strong\u003e — 1:10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy soiling\u003c\/strong\u003e — undiluted to 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote that the heavy-soiling method puts the concentrate on the surface.\u003c\/strong\u003e That is the mode in which eye protection matters most — see Safety.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eUsing a spray bottle, apply Shower Cleaner directly to all surfaces in the shower stall.\u003c\/li\u003e\n\u003cli\u003eAllow 5 minutes contact time before agitating with a clean cloth or soft scrubbing pad.\u003c\/li\u003e\n\u003cli\u003eRinse with clean water and allow to dry.\u003c\/li\u003e\n\u003cli\u003eGlass surfaces can be polished to a dry, streak-free finish using a microfibre cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page carried no hazard information at all.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShower Cleaner is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods and carries no poisons schedule.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 2; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e2 to 3\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: glycolic acid, citric acid, sodium lauryl ether sulphate and two proprietary surfactants — each below 5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eH318 is the statement that matters, and the geometry of the job makes it worse.\u003c\/strong\u003e This is a spray product applied overhead onto tiles and screens in an enclosed cubicle. Spray drift and rebound off a vertical surface go straight back towards the operator’s face. \u003cstrong\u003eWear eye protection.\u003c\/strong\u003e Most people do not, on this product, because it is sold as an everyday consumable and it smells pleasant.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies chemical protective gloves in \u003cstrong\u003ebutyl, neoprene or Viton\u003c\/strong\u003e, safety glasses with side shields or chemical goggles, overalls, barrier cream and access to an eye wash unit. Ventilate the cubicle — a shower recess is a small, enclosed space and aerosol accumulates.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water, holding the eyelids apart to ensure complete irrigation. Seek medical attention without delay — H318 means the damage can be permanent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing. Flush skin with running water and soap. Seek medical attention if irritation persists.\u003c\/p\u003e\n\u003ch3\u003eHow to read the “hospital-grade standard” claim\u003c\/h3\u003e\n\u003cp\u003eOur copy has described Shower Cleaner as destroying germs and bacteria to a hospital-grade standard. \u003cstrong\u003eIn Australia, “hospital grade disinfectant” is a regulated term and requires an ARTG listing. No TGA (ARTG) or APVMA number is published for this product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShower Cleaner is an acidic cleaner with genuine antimicrobial properties from its acid system, and it will reduce biological growth on a shower surface. \u003cstrong\u003eIt is not a listed disinfectant.\u003c\/strong\u003e If your scope, contract or audit requires one, use a listed product — \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e (AUST L 332284) or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-biosan-ii-5ltr\"\u003eBiosan II\u003c\/a\u003e (AUST L 332364) — and keep the listing number on file. We would rather tell you now than have it queried later.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Bleach\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an acid at pH 2 to 3, and a shower recess is where acid and bleach most often meet.\u003c\/strong\u003e Mixing an acid with sodium hypochlorite liberates chlorine gas, and a shower cubicle is about the worst confined space in which to do it.\u003c\/p\u003e\n\u003cp\u003eThe SDS names strong bases as the incompatibility. The chlorine reaction is a property of acidity itself. Never use this product in the same recess, at the same time, or with the same cloth as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-hypo-enforcer-5-ltr\"\u003eHypo Enforcer\u003c\/a\u003e working solutions\u003c\/li\u003e\n\u003cli\u003eAny hypochlorite bleach, pool chlorine or chlorine-based sanitiser\u003c\/li\u003e\n\u003cli\u003eAny ammoniated cleaner — ammonia and hypochlorite form chloramine gas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso avoid mixing with strong alkaline cleaners such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-5-ltr\"\u003eTile \u0026amp; Grout Power\u003c\/a\u003e or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-dualsan-foam\"\u003eDualSan Foam\u003c\/a\u003e. Rinse thoroughly between products, and do not carry an open bottle of this alongside an open bottle of bleach on the same trolley.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG775.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e2 to 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActives\u003c\/td\u003e\n\u003ctd\u003eGlycolic acid and citric acid, each below 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — light soiling\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — heavy soiling\u003c\/td\u003e\n\u003ctd\u003eUndiluted to 1:10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact time\u003c\/td\u003e\n\u003ctd\u003e5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeptic safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eStrong bases; hypochlorite and other chlorine products; ammoniated cleaners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.3, issued 13 January 2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-shower-cleaner-1-ltr\"\u003eActichem Shower Cleaner 1 Ltr\u003c\/a\u003e — the same product in the smaller pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-toilet-bowl-cleaner-5-ltr\"\u003eActichem Toilet Bowl Cleaner\u003c\/a\u003e — the same acid family for the pan and urinals\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-bathroom-cleaner-5-ltr\"\u003eActichem Bathroom Cleaner\u003c\/a\u003e — the mildly alkaline option for the rest of the washroom\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e — for scale and efflorescence beyond what a shower cleaner will shift\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e — TGA-listed hospital grade disinfectant, where a listing is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/RG775-Shower-Cleaner-13012026.pdf\"\u003eActichem Shower Cleaner Safety Data Sheet — version 1.3, issued 13 January 2026\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur previously hosted copy was the March 2021 sheet and has been superseded.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG775.05\u003c\/p\u003e\n\u003cp\u003eCleaning a stone or engineered-stone shower recess, or working to a scope that requires a listed disinfectant? Contact Carpet Cleaners Warehouse before you order — an etched stone screen surround is not a repairable mistake.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eShower Cleaner (RG775) is certified by \u003cstrong\u003eGood Environmental Choice Australia\u003c\/strong\u003e under licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas. The licence was issued on 22 November 2024 and is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a requirement in government and commercial tenders rather than a preference.\u003c\/p\u003e\n\u003cp\u003eThe certificate listing this product is published by GECA and can be read in full at \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. If your tender requires a copy, contact us and we will supply it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286072979669,"sku":"RG775.05","price":70.62,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Shower-Cleaner-5-ltr.jpg?v=1780551521"},{"product_id":"actichem-toilet-bowl-cleaner-5-ltr","title":"Actichem Toilet Bowl Cleaner 5 ltr","description":"\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Responsibly Green Toilet Bowl Cleaner employs a naturally occurring organic acid with a lower corrosive profile than traditional mineral acids, inherent antimicrobial properties, and strong scale-removal power. This formula provides high-performance cleaning and de-staining of toilets and urinals in virtually all facility types whilst protecting the environment. It is also boosted with Elimotech odour-neutralising technology and anti-resoiling chemistry to make future cleans easier.\u003c\/p\u003e\n\u003cp\u003eThe acid system is glycolic and citric acid rather than hydrochloric or phosphoric. That is a real advantage for the operator and for the substrate — but it does not make the product mild. See Safety below.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasily and effectively removes rust, scale, stains and algae.\u003c\/li\u003e\n\u003cli\u003eBoosted with Elimotech technology to continue working after your work is done.\u003c\/li\u003e\n\u003cli\u003eActichem describe the formula as having powerful germ-killing action. See the note under Safety about how to read that claim.\u003c\/li\u003e\n\u003cli\u003eCleans, refreshes and eliminates organic waste.\u003c\/li\u003e\n\u003cli\u003eDigests organic matter at the source.\u003c\/li\u003e\n\u003cli\u003eDestroys bad odours.\u003c\/li\u003e\n\u003cli\u003eAnti-resoiling technology means surfaces repel dirt.\u003c\/li\u003e\n\u003cli\u003ePart of Actichem’s Responsibly Green range.\u003c\/li\u003e\n\u003cli\u003eSeptic safe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eCleaning of toilets and urinals.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003eRead and understand the Safety Data Sheet before use. \u003cstrong\u003eReady to use — do not dilute.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eToilet bowls\u003c\/h3\u003e\n\u003cp\u003eGenerously apply Toilet Bowl Cleaner to the inside of the bowl using the applicator bottle. Scrub the surface with a toilet brush and leave it for 5 to 10 minutes before flushing.\u003c\/p\u003e\n\u003ch3\u003eUrinals\u003c\/h3\u003e\n\u003cp\u003eSqueeze the bottle to cover the urinal area and clean with a toilet brush. Immediately after cleaning, flush generously with water.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read this section even if you have used this product before. Earlier versions of this page recorded the safety profile as non-hazardous. That was wrong, and we have corrected it against the current Safety Data Sheet.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToilet Bowl Cleaner is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e under the WHS Regulations. It is \u003cstrong\u003enot\u003c\/strong\u003e classified as dangerous goods for transport, and it carries no Poisons Schedule.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH315\u003c\/strong\u003e — causes skin irritation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH318\u003c\/strong\u003e — causes serious eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 2; Serious Eye Damage\/Eye Irritation Category 1\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e2 to 3\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: glycolic acid, citric acid, sodium lauryl ether sulphate and a proprietary surfactant, each below 10%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eH318 is the statement that matters here.\u003c\/strong\u003e It means a splash in the eye can cause irreversible damage. This is a ready-to-use product applied by squeeze bottle into a bowl at floor level, which is precisely the geometry that produces upward splash. \u003cstrong\u003eWear eye protection.\u003c\/strong\u003e A great many cleaners do not, on this product, because it is sold as an everyday consumable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the signal word.\u003c\/strong\u003e Actichem’s own product page gives the signal word as “Warning”. Their current Safety Data Sheet, version 1.3 issued 12 January 2026, says \u003cstrong\u003eDANGER\u003c\/strong\u003e. We publish the Safety Data Sheet position, because that is the controlled document.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the published pH.\u003c\/strong\u003e Actichem’s product page currently states pH 8.5. That cannot be right for a product whose actives are glycolic and citric acid; the SDS states 2 to 3, and our own long-standing figure of 2.5 sits inside that range. We publish the SDS range and have raised the discrepancy with Actichem.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies chemical protective gloves in butyl or neoprene, safety glasses with side shields or chemical goggles, overalls, and barrier cream.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Wash out immediately with fresh running water, holding the eyelids apart to ensure complete irrigation. Seek medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Remove contaminated clothing. Flush skin with running water and soap. Seek medical attention if irritation persists.\u003c\/p\u003e\n\u003ch3\u003eHow to read the germ-killing claim\u003c\/h3\u003e\n\u003cp\u003eActichem describe the product as having powerful germ-killing action, and the SDS confirms the acid system has inherent antimicrobial properties. \u003cstrong\u003eHowever, no TGA (ARTG) or APVMA registration number is published for this product.\u003c\/strong\u003e If your scope of work, contract or audit requires a listed disinfectant, this is not the product to specify. Use a TGA-listed product such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e or \u003ca href=\"https:\/\/ccwonline.com.au\/products\/thymox-5-ltr\"\u003eThymox\u003c\/a\u003e and keep the listing number on file. We would rather tell you that now than have it queried during an audit.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Bleach\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an acid at pH 2 to 3, and toilet cleaning is where acid and bleach most often meet.\u003c\/strong\u003e Mixing an acid with sodium hypochlorite liberates chlorine gas. A toilet cubicle is a small, poorly ventilated space, and chlorine gas in a confined space causes severe respiratory injury.\u003c\/p\u003e\n\u003cp\u003eThe SDS lists no specific incompatible materials, and the acids here are weak organic acids rather than mineral acids — but the reaction with hypochlorite is a property of acidity itself, not of any particular acid. Never use this product in the same bowl, at the same time, or with the same brush as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-chlorosan-5-ltr\"\u003eActichem Chlorosan\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-mould-exterminator-5l\"\u003eActichem Mould Exterminator\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAny hypochlorite bleach, pool chlorine or chlorine-based sanitiser\u003c\/li\u003e\n\u003cli\u003eAny ammoniated cleaner — ammonia and hypochlorite form chloramine gas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlush thoroughly between products, and never store an open bottle of this alongside an open bottle of bleach on the same trolley.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG735.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eDeep Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFresh Blossom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e2 to 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActives\u003c\/td\u003e\n\u003ctd\u003eGlycolic acid and citric acid, each below 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e5 to 10 minutes in the bowl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH315, H318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods — not regulated for transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeptic safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.3, issued 12 January 2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-bathroom-cleaner-5-ltr\"\u003eActichem Bathroom Cleaner\u003c\/a\u003e — for the rest of the washroom\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e — TGA-listed disinfectant, where a listing number is required\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e — for scale and efflorescence on the floor and walls, beyond what a bowl cleaner will shift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/RG735-Toilet-Bowl-Cleaner-12012026.pdf\"\u003eActichem Toilet Bowl Cleaner Safety Data Sheet — version 1.3, issued 12 January 2026\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur previously hosted copy was the August 2021 sheet and has been superseded.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG735.05\u003c\/p\u003e\n\u003cp\u003eNeed a washroom product with a published disinfectant listing, or advice on sequencing acid and chlorine steps safely on the same site? Contact Carpet Cleaners Warehouse before you order.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eToilet Bowl Cleaner (RG735) is certified by \u003cstrong\u003eGood Environmental Choice Australia\u003c\/strong\u003e under licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas. The licence was issued on 22 November 2024 and is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a requirement in government and commercial tenders rather than a preference.\u003c\/p\u003e\n\u003cp\u003eThe certificate listing this product is published by GECA and can be read in full at \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. If your tender requires a copy, contact us and we will supply it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286073143509,"sku":"RG735.05","price":62.48,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Toilet-Bowl-Cleaner-5-ltr.jpg?v=1780551522"},{"product_id":"actichem-forest-fresh-5-ltr","title":"Actichem Forest Fresh 5 Ltr","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActichem Forest Fresh\u003c\/strong\u003e is a neutral antibacterial all-purpose detergent, ideal for cleaning and sanitising bacteria-sensitive areas. It uses a combination of germicides that kill bacteria, along with a pleasant perfume, to effectively deodorise and freshen a wide variety of areas. For areas such as sick bays, hospital wards and change rooms, where odour control is an issue, Forest Fresh makes an ideal all-round cleaner for all hard surfaces. It removes the bacteria that cause foul odours, rather than masking them. This listing is the 5 litre pack, Actichem code RG651.05.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKills SARS-CoV-2 (COVID-19 virus) - \u003ca href=\"https:\/\/www.tga.gov.au\/\" rel=\"noopener\" target=\"_blank\"\u003eTGA Australia listing\u003c\/a\u003e AUST L 374141.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt cleans and disinfects in one operation, so it replaces a detergent and a separate sanitiser on most hard-surface routines. At 20 to 40 ml per litre a 5 litre pack makes roughly 125 to 250 litres of working solution.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-bacterial.\u003c\/strong\u003e Will efficiently kill a broad spectrum of bacteria (Commercial Disinfectant Grade), including organisms such as \u003cem\u003ePseudomonas\u003c\/em\u003e, \u003cem\u003eEscherichia coli\u003c\/em\u003e and \u003cem\u003eStaphylococcus aureus\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePotentiated.\u003c\/strong\u003e Contains an effective surfactant and wetting agent, which enhances the ability of the sanitiser to penetrate and destroy the bacteria effectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeodorises.\u003c\/strong\u003e Has a fresh, lingering floral fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile.\u003c\/strong\u003e Cleans and sanitises in one operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQAC-based.\u003c\/strong\u003e Based on a QAC-type disinfectant (alkyl benzyl ammonium chloride, sometimes known as benzalkonium chloride).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface safe.\u003c\/strong\u003e Safe to use on all types of floors, whether sealed or not. Will not dull polished flooring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere Forest Fresh fits\u003c\/h2\u003e\n\u003cp\u003eForest Fresh is a commercial-grade disinfectant and cleaner. It is the right product for routine cleaning and sanitising of hard surfaces in places where bacterial odour is the problem - washrooms, change rooms, sick bays, wards, kitchens, gyms, childcare and aged care floors, waste areas and bin rooms.\u003c\/p\u003e\n\u003cp\u003eIt is the wrong product where you need a \u003cstrong\u003ehospital-grade\u003c\/strong\u003e disinfectant, where you are treating mould rather than bacteria, or where you are deodorising soft furnishings and carpet rather than hard surfaces. Forest Fresh is listed as Commercial Disinfectant Grade, which is not the same thing as hospital grade. If your scope of works calls for hospital grade, use \u003ca href=\"\/products\/thymox-5-ltr\"\u003eThymox\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eSurfaces\u003c\/h2\u003e\n\u003cp\u003eSealed and unsealed floors, natural stone, ceramic and porcelain, concrete and masonry, plasterboard, rubber, timber and vinyl. The neutral pH is what makes it safe on polished floors - it cleans without stripping or dulling the finish, so it suits maintenance routines on sealed and burnished surfaces where an alkaline cleaner would cause problems over time.\u003c\/p\u003e\n\u003cp\u003eAlways pre-test the cleaning solution on the surface to be cleaned.\u003c\/p\u003e\n\u003ch2\u003eDilution\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eRate\u003c\/th\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning and sanitising hard surfaces\u003c\/td\u003e\n\u003ctd\u003e40 ml per litre of water\u003c\/td\u003e\n\u003ctd\u003e1:25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning and sanitising floors, or general deodorising\u003c\/td\u003e\n\u003ctd\u003e20 ml per litre of water\u003c\/td\u003e\n\u003ctd\u003e1:50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhere large amounts of organic matter are present\u003c\/td\u003e\n\u003ctd\u003eHigher than the rates above\u003c\/td\u003e\n\u003ctd\u003eStronger than 1:25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the safety data sheet before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test the cleaning solution on the surface to be cleaned.\u003c\/li\u003e\n\u003cli\u003eApply the solution using clean equipment.\u003c\/li\u003e\n\u003cli\u003eScrub if the soil is stubborn.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllow at least 5 minutes of contact time for maximum anti-bacterial efficiency.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRinse with clear water if desired.\u003c\/li\u003e\n\u003cli\u003eSoak bed pans and similar items in Forest Fresh solution for 5 minutes or longer before rinsing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eThe 5 minute contact time is the step most often skipped, and it is the step that does the disinfecting.\u003c\/strong\u003e Spraying a surface and wiping it dry straight away cleans it but does not sanitise it. The surface has to stay visibly wet with solution for the full five minutes. On a warm day or a porous surface that usually means going back over the area a second time rather than relying on the first application to stay wet.\u003c\/p\u003e\n\u003cp\u003eApply the solution using clean equipment. Quaternary ammonium disinfectants are deactivated by anionic detergent residue, so a mop or cloth still carrying ordinary floor detergent will reduce the effectiveness of the Forest Fresh solution. Rinse equipment out before you change over.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously described Forest Fresh as non-hazardous. That was incorrect and it has been corrected here.\u003c\/strong\u003e Actichem's current safety data sheet, RG651 version 2.4 issued 9 January 2026, classifies the concentrate as a hazardous chemical.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSkin Corrosion \/ Irritation Category 2 - \u003cstrong\u003eH315, causes skin irritation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSerious Eye Damage Category 1 - \u003cstrong\u003eH318, causes serious eye damage\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-dangerous goods. No HAZCHEM code. No poison schedule. Ships unregulated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe classification applies to the concentrate. H318 means a splash of undiluted product in an unprotected eye can cause irreversible damage, and in practice that happens while decanting and diluting rather than while mopping.\u003c\/p\u003e\n\u003cp\u003ePersonal protective equipment specified in the safety data sheet:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChemical goggles, or safety glasses with side shields\u003c\/li\u003e\n\u003cli\u003eElbow-length chemical protective gloves - neoprene or butyl\u003c\/li\u003e\n\u003cli\u003eAccess to an eye wash unit wherever the concentrate is handled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf concentrate enters an eye, wash out immediately with fresh running water for 10 to 15 minutes and seek medical attention. If it contacts skin, remove contaminated clothing and flush the skin and hair with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne discrepancy worth knowing about.\u003c\/strong\u003e Actichem's own product page gives the signal word as Warning. Their current safety data sheet for the same product code says DANGER, and so did the previous version. We publish the safety data sheet position because it is the controlled document, and we have asked Actichem to confirm it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/RG651-Forest-Fresh-09012026.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload the current Forest Fresh safety data sheet (RG651, version 2.4, 09\/01\/2026)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe sheet \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202210-Actichem-Forest-Fresh-RG651.pdf\" rel=\"noopener\" target=\"_blank\"\u003epreviously hosted here (version 2.2, 28\/10\/2022)\u003c\/a\u003e is superseded. The classification is unchanged between the two versions, but use the 2026 sheet.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct code\u003c\/th\u003e\n\u003ctd\u003eRG651\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU (this pack)\u003c\/th\u003e\n\u003ctd\u003eRG651.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct form\u003c\/th\u003e\n\u003ctd\u003eLiquid concentrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eGreen (safety data sheet: clear green liquid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFragrance\u003c\/th\u003e\n\u003ctd\u003eCrisp forest pine (safety data sheet odour descriptor: eucalyptus \/ pine)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003epH\u003c\/th\u003e\n\u003ctd\u003e8.5 as published by Actichem and previously by CCW. SDS v2.4 gives a range of 7.5 to 8.5. Both are shown until Actichem confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003ctd\u003e1:25 to 1:50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYield\u003c\/th\u003e\n\u003ctd\u003eApproximately 125 to 250 litres of working solution per 5 litre pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContact time\u003c\/th\u003e\n\u003ctd\u003eAt least 5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific gravity\u003c\/th\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDangerous goods\u003c\/th\u003e\n\u003ctd\u003eNot classified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal word\u003c\/th\u003e\n\u003ctd\u003eDANGER (SDS v2.4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack sizes\u003c\/th\u003e\n\u003ctd\u003eActichem list a 1 litre chamber, 5 litre and 15 litre. CCW stock the 5 litre and 15 litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVendor\u003c\/th\u003e\n\u003ctd\u003eActichem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe concentrate is a quaternary ammonium chloride disinfectant with isopropanol and two proprietary surfactants, each below 5 per cent per the safety data sheet. The full ingredient list with CAS numbers is in section 3 of the sheet linked above.\u003c\/p\u003e\n\u003ch2\u003eApprovals and certifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTGA listed, AUST L 374141\u003c\/strong\u003e, to kill SARS-CoV-2 and a broad spectrum of bacteria. We reproduce this listing exactly as Actichem publish it, including the organisms named above. It should not be read as covering organisms or viruses that are not named.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGECA certified, licence ACT-2024.\u003c\/strong\u003e Forest Fresh is listed as RG651 on Good Environmental Choice Australia licence ACT-2024, issued to Actichem Pty Ltd on 22 November 2024 against the Cleaning Products standard CPv3.0-2022, with conformance assessed by Bureau Veritas. The licence is current until 10 June 2027, and the certificate names the product without restriction as to pack size.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, which is why the certification often appears as a tender requirement rather than a preference. The certificate is published by GECA and can be read in full as \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. We will supply a copy for tender documentation on request.\u003c\/p\u003e\n\u003ch2\u003ePack sizes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eForest Fresh 5 litre - RG651.05 (this listing)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/actichem-forest-fresh-15-ltr\"\u003eForest Fresh 15 litre - RG651.15\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes Forest Fresh actually kill COVID-19?\u003c\/h3\u003e\n\u003cp\u003eIt is TGA listed under AUST L 374141 to kill SARS-CoV-2, the virus that causes COVID-19. That listing depends on using it correctly: at the right dilution, on a pre-cleaned surface, with at least 5 minutes of contact time. A quick wipe-over does not achieve it.\u003c\/p\u003e\n\u003ch3\u003eWhat dilution should I use?\u003c\/h3\u003e\n\u003cp\u003e1:25, or 40 ml per litre, for cleaning and sanitising hard surfaces. 1:50, or 20 ml per litre, for floors and general deodorising. Go stronger than 1:25 where there is a lot of organic matter present, because soil load consumes the disinfectant before it reaches the bacteria.\u003c\/p\u003e\n\u003ch3\u003eDo I need to rinse it off?\u003c\/h3\u003e\n\u003cp\u003eOnly if you want to. Rinse with clear water if desired. On food contact surfaces, rinse. On floors, most operators leave it to dry so the residual fragrance carries.\u003c\/p\u003e\n\u003ch3\u003eIs it hospital grade?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem list it as Commercial Disinfectant Grade. That is a genuine disinfectant classification and it is appropriate for the great majority of commercial cleaning work, but it is a different category from hospital grade. If your scope of works specifies hospital grade, use \u003ca href=\"\/products\/thymox-5-ltr\"\u003eThymox\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it damage polished or sealed floors?\u003c\/h3\u003e\n\u003cp\u003eNo. The neutral pH is the point of the product. It will not dull polished flooring and it is safe on sealed and unsealed floors alike, which is why it suits maintenance routines where a strongly alkaline cleaner would degrade the finish over time.\u003c\/p\u003e\n\u003ch3\u003eWhy does the label say non-hazardous elsewhere and this page says Danger?\u003c\/h3\u003e\n\u003cp\u003eBecause the earlier wording on this page was wrong and we have corrected it. Actichem's safety data sheet, version 2.4 dated 9 January 2026, classifies Forest Fresh as Serious Eye Damage Category 1 with the signal word DANGER. Their website still shows Warning. The safety data sheet is the controlled document and takes precedence, and we have raised the inconsistency with Actichem.\u003c\/p\u003e\n\u003ch3\u003eHow much does a 5 litre pack make?\u003c\/h3\u003e\n\u003cp\u003eBetween roughly 125 litres at 1:25 and 250 litres at 1:50. For a regular cleaning round the \u003ca href=\"\/products\/actichem-forest-fresh-15-ltr\"\u003e15 litre pack\u003c\/a\u003e works out considerably cheaper per litre of working solution.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eThe mistake we see with disinfectant cleaners isn’t usually the dilution — it’s contact time. A technician can spray a surface with the right product and then wipe it straight back off, effectively turning a disinfecting procedure into a very quick clean. Forest Fresh requires the surface to remain treated long enough for the antimicrobial chemistry to do its job, and stubborn soil should still be physically removed rather than expecting disinfectant chemistry to replace cleaning.\u003c\/p\u003e\n\u003cp\u003eOn heavily contaminated surfaces, organic loading also matters. That’s why serious contamination jobs need more thought than simply “spray, wipe and move on.”\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether Forest Fresh meets the disinfectant requirement in your contract or cleaning specification? Call or email us before you order. We would rather check the grade and the listing with you than have you buy a product that does not satisfy an audit.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286073241813,"sku":"RG651.05","price":62.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Forest-Fresh-5-ltr.jpg?v=1780551523"},{"product_id":"actichem-surface-clean-hd-5-ltr","title":"Actichem Surface Clean HD 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Surface Clean HD is a \u003cstrong\u003ehighly concentrated alkaline degreaser\u003c\/strong\u003e for hard flooring and hard surfaces. It is fast and effective on grease and oil, and its concentration is what makes it economical — it runs from 1:50 down to 1:150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis page has been substantially corrected.\u003c\/strong\u003e It previously described the product as “non-hazardous”, “gentle on floor surfaces” and “totally eco-safe”, and stated a pH of 10.5. \u003cstrong\u003eThe product is a classified corrosive at pH 12.5–12.9.\u003c\/strong\u003e Please read the safety section before your next job.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves oil and grease fast\u003c\/strong\u003e — this is a genuine heavy-duty degreaser, and the alkalinity is exactly why it works.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighly concentrated\u003c\/strong\u003e — one dilution range covers degreasing through to spray-and-wipe, so it replaces several products on a trolley.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-resoiling technology\u003c\/strong\u003e — surfaces resist dirt after cleaning.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo phosphates. Septic safe.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for use in all types of cleaning equipment\u003c\/strong\u003e — but see the metals warning below before choosing where to use it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA note on what we do and do not claim\u003c\/h3\u003e\n\u003cp\u003eThis listing previously said Surface Clean HD leaves surfaces \u003cstrong\u003e“sanitised”\u003c\/strong\u003e and has \u003cstrong\u003e“powerful germ-killing action”\u003c\/strong\u003e. \u003cstrong\u003eWe have removed that wording.\u003c\/strong\u003e Sanitiser and germ-kill claims are regulated in Australia and we can find no ARTG or APVMA listing for this product. We have asked Actichem; if a listing exists we will publish the number.\u003c\/p\u003e\n\u003cp\u003eWe have also removed \u003cstrong\u003e“gentle on floor surfaces”\u003c\/strong\u003e and \u003cstrong\u003e“totally eco-safe”\u003c\/strong\u003e. The product is genuinely phosphate-free and septic safe, and those claims stand. But a corrosive product at pH 12.9 that must be kept away from aluminium is not accurately described as gentle, and we would rather be precise than enthusiastic.\u003c\/p\u003e\n\u003ch2\u003eApplication areas and surface suitability\u003c\/h2\u003e\n\u003cp\u003eAll hard flooring surfaces.\u003c\/p\u003e\n\u003ch3\u003e⚠ Important — keep it off aluminium and copper\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eActichem’s safety data sheet specifically warns against contact with copper, aluminium and their alloys\u003c\/strong\u003e, and classifies the product \u003cstrong\u003eH290 — may be corrosive to metals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn a commercial floor that is not an abstract warning. The things commonly made of aluminium, and commonly at floor level, include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoor thresholds and tracks\u003c\/li\u003e\n\u003cli\u003eSkirting trims and expansion joint covers\u003c\/li\u003e\n\u003cli\u003eLift door sills\u003c\/li\u003e\n\u003cli\u003eKick plates and trolley guards\u003c\/li\u003e\n\u003cli\u003eDrain grates and channel covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlkaline attack on aluminium is fast and visible\u003c\/strong\u003e — it dulls, pits and blooms, and it does not come back. Solution left to dry against a threshold overnight is how it happens. Rinse thoroughly, and do not let the solution pool against metal trim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlways pre-test\u003c\/strong\u003e for substrate sensitivity and dye stability. At pH 12.9 this product is not appropriate for natural stone, polished marble, or acrylic floor finishes — for those, use a neutral cleaner such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003eProNeutro\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use.\u003c\/strong\u003e Always pre-test in an inconspicuous location.\u003c\/p\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor cleaning — mop and bucket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:50 (20 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloor cleaning — autoscrubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:150 (7 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray and wipe — heavy duty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:80 (15 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray and wipe — general\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:100 (10 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressure washing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1:100 (10 ml\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eStart at the weakest dilution that does the work.\u003c\/strong\u003e The three-fold range between autoscrubber and mop-and-bucket dilution is not arbitrary — an autoscrubber applies and recovers solution continuously, so it needs less. Over-dosing an autoscrubber leaves alkaline residue on the floor, which attracts soil and, on a coated floor, damages the finish.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply with a clean cloth, mop, or through an autoscrubber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse well with water when using strong dilutions.\u003c\/strong\u003e At pH 12.9 this is not optional — unrinsed residue keeps working on the floor and on anything metal it is touching.\u003c\/li\u003e\n\u003cli\u003eKeep the container closed for maximum performance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously recorded “Safety profile: Non-hazardous” and a pH of 10.5. Both were wrong\u003c\/strong\u003e, and the pH understatement matters as much as the classification — a technician judging risk by the stated pH would have treated this as an ordinary alkaline cleaner.\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for RG705, version 1.1 issued 11 August 2021, classifies Surface Clean HD as a \u003cstrong\u003ehazardous chemical\u003c\/strong\u003e with the signal word \u003cstrong\u003eDANGER\u003c\/strong\u003e and \u003cstrong\u003ePoisons Schedule 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes \u003cstrong\u003esevere skin burns and eye damage\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH290\u003c\/strong\u003e — may be corrosive to metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoisons Schedule 5\u003c\/strong\u003e | pH \u003cstrong\u003e12.5 – 12.9\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot regulated for transport in 5 litre packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠ H314 — severe skin burns and eye damage\u003c\/h3\u003e\n\u003cp\u003eH314 is a \u003cstrong\u003ecorrosive\u003c\/strong\u003e classification. This product will burn skin, not merely irritate it.\u003c\/p\u003e\n\u003cp\u003eTwo things about alkaline burns that catch people out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey do not hurt straight away.\u003c\/strong\u003e Acid burns announce themselves; alkali burns are often painless at first, so the natural reaction is to finish the job and wash it off later. By then the damage is done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThey keep going.\u003c\/strong\u003e Alkalis saponify skin and continue penetrating until physically removed. A quick rinse is not enough — flush for a sustained period.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChemical goggles and protective clothing whenever the concentrate is handled\u003c\/strong\u003e, and whenever solution is sprayed or pressure-washed. An eyewash unit should be available where it is decanted. \u003cstrong\u003eWorking solution at 1:100 is a very different proposition from the concentrate\u003c\/strong\u003e, but decanting and dosing is where people are injured.\u003c\/p\u003e\n\u003ch3\u003e⚠ Poisons Schedule 5\u003c\/h3\u003e\n\u003cp\u003eSchedule 5 brings labelling and storage obligations. Keep it in its original labelled container, store it securely away from food, and do not decant it into an unlabelled bottle.\u003c\/p\u003e\n\u003ch3\u003eWhat it reacts with\u003c\/h3\u003e\n\u003cp\u003eAvoid \u003cstrong\u003estrong acids, acid chlorides, acid anhydrides and chloroformates.\u003c\/strong\u003e Avoid contact with \u003cstrong\u003ecopper, aluminium and their alloys.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn practice: \u003cstrong\u003enever mix Surface Clean HD with an acidic cleaner\u003c\/strong\u003e — and note that many washroom and tile cleaners are acidic. Use them as separate steps with a thorough rinse between.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Hold the eyelids apart and flush continuously with running water. Seek medical attention without delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately remove contaminated clothing and flush with large amounts of water. Seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwallowed.\u003c\/strong\u003e Do not induce vomiting. Give water and seek medical attention without delay.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG705.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHighly alkaline concentrated degreaser and hard surface cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear tan liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003eCrisp floral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:150 depending on method — see table above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12.5 – 12.9\u003c\/strong\u003e as concentrate (Actichem SDS). This listing previously stated 10.5; we have asked Actichem to confirm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e1.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey components\u003c\/td\u003e\n\u003ctd\u003eSodium metasilicate pentahydrate (CAS 10213-79-3) under 10%; sodium benzoate (CAS 532-32-1) under 10%; proprietary chelating agent and surfactants under 10% each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eStrong acids, acid chlorides, acid anhydrides, chloroformates. \u003cstrong\u003eCopper, aluminium and their alloys.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e, H290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNot regulated for transport in 5 litre packs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.1, issued 11 August 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the right hard surface cleaner\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSurface Clean HD\u003c\/strong\u003e (this product)\u003c\/td\u003e\n\u003ctd\u003epH 12.9, \u003cstrong\u003ecorrosive\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eHeavy grease and oil. Not for stone, marble or coated floors.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-spray-n-wipe-5-ltr\"\u003e\u003cstrong\u003eSpray n Wipe\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 8.6, DANGER (H318)\u003c\/td\u003e\n\u003ctd\u003eGeneral washroom and hard surface cleaning.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-neutral-detergent-5-ltr\"\u003e\u003cstrong\u003eNeutral Detergent\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 8.6, DANGER (H318)\u003c\/td\u003e\n\u003ctd\u003eGeneral purpose neutral-range cleaning.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-proneutro-5-ltr\"\u003e\u003cstrong\u003eProNeutro\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003epH 7–8, \u003cstrong\u003enon-hazardous\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eStone, marble, timber and coated floors.\u003c\/strong\u003e The right choice for pH-sensitive surfaces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReach for the mildest product that will do the job.\u003c\/strong\u003e Surface Clean HD is the heavy artillery and should be used where the soil genuinely warrants it, not as a default floor cleaner.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202108-Actichem-Surface-Cleaner-HD-RG705.pdf\"\u003eActichem Surface Clean HD safety data sheet (RG705, version 1.1, 11 August 2021)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG705.05\u003c\/p\u003e\n\u003cp\u003eSetting up a cleaning regime for a commercial site and not sure which product suits which floor? Talk to us. Matching the cleaner to the substrate is the single most effective way to make a floor last, and the most common cause of expensive damage is a strong product used where a neutral one belonged.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eSurface Clean HD (RG705) is certified by \u003cstrong\u003eGood Environmental Choice Australia\u003c\/strong\u003e under licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas. The licence was issued on 22 November 2024 and is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a requirement in government and commercial tenders rather than a preference.\u003c\/p\u003e\n\u003cp\u003eThe certificate listing this product is published by GECA and can be read in full at \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. If your tender requires a copy, contact us and we will supply it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286074454229,"sku":"RG705.05","price":133.49,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Surface-Clean-HD-5-ltr.jpg?v=1780551524"},{"product_id":"actichem-window-cleaner-5-ltr","title":"Actichem Window Cleaner 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Window Cleaner is a spray-on, wipe-off hard surface cleaner engineered for windows, mirrors and other smooth surfaces. It emulsifies oil residues, soil deposits and organic staining and dries to a clean, non-streak finish.\u003c\/p\u003e\n\u003cp\u003eIt is built on polymeric detergents, which is what delivers the non-smear result — the usual cause of streaking is detergent residue drying on the glass, and this formulation is designed not to leave it.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-smear results\u003c\/strong\u003e — polymeric chemistry gives strong cleaning action without the residue that causes streaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast drying\u003c\/strong\u003e — the selected alcohols and solvents evaporate rapidly, so you can work at pace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough on grime\u003c\/strong\u003e — emulsifiers effective on grease and oily deposits, not just dust and fingerprints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e — also works as a general spray-and-wipe hard surface cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low VOC, hypoallergenic formula\u003c\/strong\u003e with a subtle fragrance. On long window runs in occupied buildings this matters more than it sounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerified non-hazardous\u003c\/strong\u003e — see the safety section below. In a range where most products carry a classification, that is worth knowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere to use it\u003c\/h2\u003e\n\u003cp\u003eWindows, glass facades, mirrors, marble and granite, on domestic and commercial buildings. Also suited to melamine, glass, decorative stone and stainless steel bench tops and equipment in kitchens, restaurants and hotels.\u003c\/p\u003e\n\u003ch3\u003eImportant — this is an alkaline cleaner\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWindow Cleaner is pH 10.5.\u003c\/strong\u003e That is more alkaline than most people expect from a glass cleaner, and it is the most useful practical fact on this page.\u003c\/p\u003e\n\u003cp\u003eGlass does not care. Some of the things around glass do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodised aluminium window frames\u003c\/strong\u003e — alkaline cleaners can etch or bloom the anodised finish. Keep the product off the frames and wipe up overspray promptly rather than letting it dry there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow films and tints\u003c\/strong\u003e — check the film manufacturer’s guidance. Many tint warranties specify neutral cleaners only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror backing\u003c\/strong\u003e — the silvering on the reverse of a mirror is vulnerable to alkaline attack. \u003cstrong\u003eSpray the cloth, not the mirror\u003c\/strong\u003e, and never let product run down to the bottom edge where it can wick behind the backing. That is what causes the black creeping edge on older bathroom mirrors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolished marble\u003c\/strong\u003e — while the product is listed as suitable for marble and granite, treat highly polished marble with the usual care and pre-test.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNone of this makes it a difficult product. It makes it one worth pre-testing on the first job at a new site.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRead the safety data sheet before use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger spray, undiluted\u003c\/strong\u003e — spray a fine mist onto the surface and dry to a gloss finish with a clean, soft, lint-free cloth or paper towel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional squeegee work\u003c\/strong\u003e — dilute \u003cstrong\u003e20 ml per litre of water (1:50)\u003c\/strong\u003e. Apply with a window washer and squeegee off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 1:50 dilution for squeegee work is a large difference in cost per window. If you are doing commercial glass at volume, running it neat from a trigger bottle is fifty times the chemical cost for no additional result.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eVerified non-hazardous — and we checked.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem’s safety data sheet for RG559, version 1.2 issued 9 January 2026, records Window Cleaner as a \u003cstrong\u003enon-hazardous chemical and non-dangerous goods.\u003c\/strong\u003e No signal word, no hazard statements, no poisons schedule. The sheet states all ingredients are non-hazardous.\u003c\/p\u003e\n\u003cp\u003eWe are being explicit because we have been correcting a great many pages in this catalogue that claimed “non-hazardous” when the safety data sheet said otherwise — including the closely related \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-windowgleam-5-ltr\"\u003eWindowgleam\u003c\/a\u003e, which is classified WARNING with H319. \u003cstrong\u003eThis one is correct.\u003c\/strong\u003e We read the sheet and confirmed it.\u003c\/p\u003e\n\u003cp\u003eNon-hazardous does not mean careless. It is applied as a fine mist, usually at or above head height, often while you are looking up at the glass — which is the geometry most likely to put product in an eye. \u003cstrong\u003eSafety glasses are worth wearing on a long window run\u003c\/strong\u003e, and are worth insisting on for anyone working from a ladder, where an eye full of cleaner is a fall risk as much as an eye injury.\u003c\/p\u003e\n\u003ch3\u003eWindow Cleaner or Windowgleam?\u003c\/h3\u003e\n\u003cp\u003eCCW carries both, and the practical difference is now clear:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eWindow Cleaner\u003c\/strong\u003e (this product, RG559)\u003c\/td\u003e\n\u003ctd\u003epH 10.5\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNon-hazardous.\u003c\/strong\u003e Ultra-low VOC, hypoallergenic. Ready to use, or 1:50 for squeegee work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-windowgleam-5-ltr\"\u003e\u003cstrong\u003eWindowgleam\u003c\/strong\u003e\u003c\/a\u003e (AP555)\u003c\/td\u003e\n\u003ctd\u003epH 10.3\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eWARNING — H319\u003c\/strong\u003e, causes serious eye irritation. Same dilution structure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSimilar pH, similar application, similar dilution — but \u003cstrong\u003ethis one is not a classified hazardous chemical and the other is.\u003c\/strong\u003e Where either will do the job, and particularly where cleaning staff rather than trained technicians are handling it, Window Cleaner is the lower-hazard choice.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eRG559.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAlkaline glass and hard surface cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eClear colourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdour\u003c\/td\u003e\n\u003ctd\u003ePowder soft — subtle fragrance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eReady to use by trigger spray; \u003cstrong\u003e1:50 (20 ml\/L)\u003c\/strong\u003e for squeegee application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.5\u003c\/strong\u003e — alkaline. See the surface notes above. This listing previously stated 10.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNon-hazardous chemical\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eNone — not applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eNone applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\n\u003ctd\u003eNon-dangerous goods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 1.2, issued 9 January 2026 — the most current sheet in the Actichem range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-windowgleam-5-ltr\"\u003eActichem Windowgleam\u003c\/a\u003e — the alternative glass cleaner. Classified WARNING with H319 — see the comparison above.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-spray-n-wipe-5-ltr\"\u003eActichem Spray n Wipe\u003c\/a\u003e — enzyme-based washroom and hard surface cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-surface-clean-hd-5-ltr\"\u003eActichem Surface Clean HD\u003c\/a\u003e — heavy duty degreaser for tougher build-up. Corrosive — read its safety section.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202601-Actichem-Window-Cleaner-RG559.pdf\"\u003eActichem Window Cleaner safety data sheet (RG559, version 1.2, 9 January 2026)\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: RG559.05\u003c\/p\u003e\n\u003cp\u003eWorking on a building with tinted or filmed glass and not sure whether an alkaline cleaner is appropriate? Ask us before the first job rather than after. We would rather answer the question than help you replace a film.\u003c\/p\u003e\n\u003ch2\u003eEnvironmental certification\u003c\/h2\u003e\n\u003cp\u003eWindow Cleaner (RG559) is certified by \u003cstrong\u003eGood Environmental Choice Australia\u003c\/strong\u003e under licence \u003cstrong\u003eACT-2024\u003c\/strong\u003e, against the Cleaning Products standard CPv3.0-2022. Conformance was assessed by Bureau Veritas. The licence was issued on 22 November 2024 and is current until \u003cstrong\u003e10 June 2027\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, so the certification is often a requirement in government and commercial tenders rather than a preference.\u003c\/p\u003e\n\u003cp\u003eThe certificate listing this product is published by GECA and can be read in full at \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. If your tender requires a copy, contact us and we will supply it.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286152573141,"sku":"RG559.05","price":45.21,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Window-Cleaner-5-ltr.jpg?v=1780551525"},{"product_id":"actichem-deostor-fire-citrus-5-ltr","title":"Actichem Deostor Fire - Citrus 5 Ltr","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDeostor Fire - Citrus is a concentrated enzyme-based odour control additive for fire and smoke work. You dilute it into your knock-down spray or your wash-down solution, so it treats the surfaces and the wash water while you are remediating. This listing is the 5 litre drum.\u003c\/p\u003e\n\u003cp\u003eIt is matched to the fuel that burned: the Citrus grade is for smoke and soot odours from \u003cstrong\u003etimber, paper, protein and synthetic fires\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eDeostor Fire is available in Citrus or Floral base - it is powered by the innovative Elimotech chemistry for rapid neutralisation of odours caused by smoke and soot. Elimotech reacts and neutralises mal-odours at a micro-molecular level, so trapped, embedded and air-borne odours are neutralised rather than masked. Odour control is only as durable as the source removal that precedes it. Where contaminated material remains in place, odour can return as conditions change — treat the source first and use this to finish the job, not to substitute for it.\u003c\/p\u003e\n\u003cp\u003eEven a thorough disinfection and wash down of an area will not remove all odour molecules. Micro smoke odour particles exist in the air, trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an Odour Control Strategy.\u003c\/p\u003e\n\u003ch2\u003eCitrus or Floral? Check the hazard data, not just the fragrance\u003c\/h2\u003e\n\u003cp\u003eThese are sold as a fragrance choice, but \u003cstrong\u003ethey are not equivalent products from a safety point of view\u003c\/strong\u003e and it is worth knowing before you choose.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDeostor Fire - Citrus (AP521)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDeostor Fire - Floral (AP522)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched to\u003c\/td\u003e\n\u003ctd\u003eTimber, paper, protein and synthetic fires\u003c\/td\u003e\n\u003ctd\u003ePlastic and synthetic fires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWarning\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDanger\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarcinogenicity\u003c\/td\u003e\n\u003ctd\u003eNot classified\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory 1B - H350 may cause cancer\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRespiratory\u003c\/td\u003e\n\u003ctd\u003eNot classified\u003c\/td\u003e\n\u003ctd\u003eSTOT Cat 3 - H335 may cause respiratory irritation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlso\u003c\/td\u003e\n\u003ctd\u003eFlammable liquid Cat 3, eye irritant, skin sensitiser\u003c\/td\u003e\n\u003ctd\u003eFlammable liquid Cat 3, eye irritant, skin sensitiser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBoth are classified from Actichem's own safety data sheets, issued September 2025. If the fire was mixed-fuel and either grade would work, that difference is worth weighing.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eSupplied as a concentrate. Always dilute.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral use:\u003c\/strong\u003e 20-40 ml per litre of water (1:50 to 1:25), depending on how heavy the odour is.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial knock-down on job entry:\u003c\/strong\u003e 40 ml per litre (1:25).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs an additive:\u003c\/strong\u003e 10-30 ml per litre of ready-to-use restoration solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaundering:\u003c\/strong\u003e 5-10 ml per kg of washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSevere odour:\u003c\/strong\u003e 50 ml Deostor Fire plus 10 ml \u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e per litre of water.\u003c\/li\u003e\n\u003cli\u003ePhysically remove charred material first. No additive out-runs a source left in place.\u003c\/li\u003e\n\u003cli\u003eApply by pressure sprayer or cold\/wet fog. Airless paint sprayers suit larger areas.\u003c\/li\u003e\n\u003cli\u003ePre-test in an inconspicuous location for substrate sensitivity before treating the whole area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditive compatibility.\u003c\/strong\u003e Actichem list Deostor Fire as suitable to add to Fire Restore, Fire Fix, most laundry detergents, and carpet and upholstery prespray and in-tank solutions. \u003cstrong\u003eDo not add it to oxidising or chlorine solutions without consulting an Actichem technician.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem's own instructions finish the job by fogging the treated area once the restoration process is complete - see the \u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak\u003c\/a\u003e range for that step.\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe have corrected this page.\u003c\/strong\u003e It previously described this product as non-hazardous. That was wrong, and we would rather say so plainly than change it quietly. Actichem's current safety data sheet, issued 29 September 2025, classifies it as follows.\u003c\/p\u003e\n\u003cp\u003eSignal word: \u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification: Eye Irritation Category 2A, Skin Sensitisation Category 1, Flammable Liquid Category 3.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH226 Flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eH317 May cause an allergic skin reaction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlash point above 23 °C. HAZCHEM 3Y. The concentrate contains ethanol and isopropanol, which is why it is a flammable liquid - keep it away from heat and ignition sources and keep the container closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOf the two Deostor Fire grades, this is the lower-hazard one.\u003c\/strong\u003e Citrus carries no carcinogen classification and no respiratory classification. The Floral grade carries both. Where either fragrance would suit the fuel, that is a real reason to choose Citrus.\u003c\/p\u003e\n\u003cp\u003eLower hazard is not no hazard. H317 means repeated skin contact can sensitise you, and once you are sensitised it does not wear off. Gloves and eye protection, good ventilation, no skin contact. Read the safety data sheet in full and make sure it reaches whoever is actually handling the product, not just whoever ordered it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on transport.\u003c\/strong\u003e Actichem state the product is \u003cem\u003enot regulated for transport of dangerous goods in pack sizes of 5 litres or less\u003c\/em\u003e. That exemption is about how it may be shipped. It does not mean the product is non-hazardous, and it does not change how you store or handle it on site. We think that exemption is where the old wording on this page came from.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202509-Actichem-Deostor-Fire-Citrus-AP521.pdf?v=1770612673\"\u003eDownload the Actichem safety data sheet for Deostor Fire - Citrus AP521 (PDF, issued 29 September 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deostor Fire - Citrus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP521\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP521.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre (also available in 1 litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrate - dilute before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eCitrus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:25 (20-40 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched to\u003c\/td\u003e\n\u003ctd\u003eSmoke and soot odours from timber, paper, protein and synthetic fires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWARNING\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eAbove 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus\u003c\/a\u003e - timber, paper, protein and synthetic fires. Signal word Warning, no carcinogen classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral\u003c\/a\u003e - plastic and synthetic fires. Signal word Danger, carries H350.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic\u003c\/a\u003e - decaying matter, human and animal waste\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e - booster for tobacco, curry and cadaverine. Always blended, never neat.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-spray-5-ltr\"\u003eDeostor Spray\u003c\/a\u003e - ready-to-use hand spray for small areas. Do not fog it.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV\u003c\/a\u003e and \u003ca href=\"\/products\/actichem-odourtak-w-citrus-5-ltr\"\u003eOdourtak W\u003c\/a\u003e - ready-to-use fogging solutions for the finishing step\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeostor or Odourtak?\u003c\/h2\u003e\n\u003cp\u003eMost fire work uses both. \u003cstrong\u003eDeostor\u003c\/strong\u003e is a concentrate you dilute into your knock-down or wash-down solution - it treats surfaces and the wash water during remediation. \u003cstrong\u003eOdourtak\u003c\/strong\u003e is ready to use and is fogged into the space afterwards, to reach the air and the cavities the smoke got into.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCitrus or Floral?\u003c\/h3\u003e\n\u003cp\u003eMatch it to the fuel: Citrus for timber, paper, protein and synthetic fires; Floral for plastic and synthetic fires. On a mixed-fuel fire where either would do, note that Floral carries a carcinogen and respiratory classification and Citrus does not - see the comparison above.\u003c\/p\u003e\n\u003ch3\u003eHow much do I use?\u003c\/h3\u003e\n\u003cp\u003e20-40 ml per litre of water depending on odour severity, or 40 ml per litre for initial knock-down. As an additive to a ready-to-use restoration solution, 10-30 ml per litre.\u003c\/p\u003e\n\u003ch3\u003eCan I fog it?\u003c\/h3\u003e\n\u003cp\u003eYes - Actichem list cold and wet fogging as a suitable application for Deostor Fire, as well as pressure spraying. That is different from Deostor Spray, which must not be fogged.\u003c\/p\u003e\n\u003ch3\u003eIs it hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes. Signal word DANGER. It is a Category 3 flammable liquid, an eye irritant, a skin sensitiser, a respiratory irritant, and it carries H350 - may cause cancer. The page used to say non-hazardous; that was wrong and has been corrected. The fact that it ships unregulated in packs of 5 litres or less is a transport exemption, not a hazard rating.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with bleach or an oxidiser?\u003c\/h3\u003e\n\u003cp\u003eNot without asking Actichem first. They call this out explicitly for chlorine and oxidising solutions.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eOn a heavy fire job, one of the first battles is simply getting the odour under enough control for the restoration work to proceed. Deostor Fire can be used for that initial knockdown, then carried through the wash-down by adding it to the restoration cleaning solution. The mistake we see is treating that first odour reduction as proof the source is gone — if soot and fire residues remain, the odour problem hasn’t been finished.\u003c\/p\u003e\n\u003cp\u003eFor the variants, Citrus is aimed particularly at protein, paper and timber fire odours, while Floral is aimed at plastic and synthetic fire odours.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure which grade the job calls for, or how to blend it with what you already run? Ring Carpet Cleaners Warehouse before you order. On this range the fragrance choice carries a safety difference as well as a performance one, and it is worth two minutes on the phone.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286186848469,"sku":"AP521.05","price":221.21,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Deostor-Fire-Citrus-5-ltr.jpg?v=1780551527"},{"product_id":"actichem-deostor-fire-floral-5-ltr","title":"Actichem Deostor Fire - Floral 5 Ltr","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDeostor Fire - Floral is a concentrated enzyme-based odour control additive for fire and smoke work. You dilute it into your knock-down spray or your wash-down solution, so it treats the surfaces and the wash water while you are remediating. This listing is the 5 litre drum.\u003c\/p\u003e\n\u003cp\u003eIt is matched to the fuel that burned: the Floral grade is for smoke and soot odours from \u003cstrong\u003eplastic and synthetic fires\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eDeostor Fire is available in Citrus or Floral base - it is powered by the innovative Elimotech chemistry for rapid neutralisation of odours caused by smoke and soot. Elimotech reacts and neutralises mal-odours at a micro-molecular level, so trapped, embedded and air-borne odours are neutralised rather than masked. Odour control is only as durable as the source removal that precedes it. Where contaminated material remains in place, odour can return as conditions change — treat the source first and use this to finish the job, not to substitute for it.\u003c\/p\u003e\n\u003cp\u003eEven a thorough disinfection and wash down of an area will not remove all odour molecules. Micro smoke odour particles exist in the air, trapped in fabrics, carpets and porous materials. In addition to a cleaning routine, you need an Odour Control Strategy.\u003c\/p\u003e\n\u003ch2\u003eCitrus or Floral? Check the hazard data, not just the fragrance\u003c\/h2\u003e\n\u003cp\u003eThese are sold as a fragrance choice, but \u003cstrong\u003ethey are not equivalent products from a safety point of view\u003c\/strong\u003e and it is worth knowing before you choose.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDeostor Fire - Citrus (AP521)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDeostor Fire - Floral (AP522)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched to\u003c\/td\u003e\n\u003ctd\u003eTimber, paper, protein and synthetic fires\u003c\/td\u003e\n\u003ctd\u003ePlastic and synthetic fires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eWarning\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDanger\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarcinogenicity\u003c\/td\u003e\n\u003ctd\u003eNot classified\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory 1B - H350 may cause cancer\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRespiratory\u003c\/td\u003e\n\u003ctd\u003eNot classified\u003c\/td\u003e\n\u003ctd\u003eSTOT Cat 3 - H335 may cause respiratory irritation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlso\u003c\/td\u003e\n\u003ctd\u003eFlammable liquid Cat 3, eye irritant, skin sensitiser\u003c\/td\u003e\n\u003ctd\u003eFlammable liquid Cat 3, eye irritant, skin sensitiser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBoth are classified from Actichem's own safety data sheets, issued September 2025. If the fire was mixed-fuel and either grade would work, that difference is worth weighing.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eSupplied as a concentrate. Always dilute.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral use:\u003c\/strong\u003e 20-40 ml per litre of water (1:50 to 1:25), depending on how heavy the odour is.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial knock-down on job entry:\u003c\/strong\u003e 40 ml per litre (1:25).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs an additive:\u003c\/strong\u003e 10-30 ml per litre of ready-to-use restoration solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaundering:\u003c\/strong\u003e 5-10 ml per kg of washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSevere odour:\u003c\/strong\u003e 50 ml Deostor Fire plus 10 ml \u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e per litre of water.\u003c\/li\u003e\n\u003cli\u003ePhysically remove charred material first. No additive out-runs a source left in place.\u003c\/li\u003e\n\u003cli\u003eApply by pressure sprayer or cold\/wet fog. Airless paint sprayers suit larger areas.\u003c\/li\u003e\n\u003cli\u003ePre-test in an inconspicuous location for substrate sensitivity before treating the whole area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditive compatibility.\u003c\/strong\u003e Actichem list Deostor Fire as suitable to add to Fire Restore, Fire Fix, most laundry detergents, and carpet and upholstery prespray and in-tank solutions. \u003cstrong\u003eDo not add it to oxidising or chlorine solutions without consulting an Actichem technician.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActichem's own instructions finish the job by fogging the treated area once the restoration process is complete - see the \u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak\u003c\/a\u003e range for that step.\u003c\/p\u003e\n\u003ch2\u003eSafety - please read before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe have corrected this page.\u003c\/strong\u003e It previously described this product as non-hazardous. That was wrong, and we would rather say so plainly than change it quietly. Actichem's current safety data sheet, issued 30 September 2025, classifies it as follows.\u003c\/p\u003e\n\u003cp\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGHS classification: Eye Irritation Category 2A, Skin Sensitisation Category 1, Flammable Liquid Category 3, STOT Respiratory Irritation Category 3, Carcinogenicity Category 1B.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eH226 Flammable liquid and vapour\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eH317 May cause an allergic skin reaction\u003c\/li\u003e\n\u003cli\u003eH335 May cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003eH350 May cause cancer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlash point above 23 °C. HAZCHEM 3Y. The concentrate contains ethanol and isopropanol, which is why it is a flammable liquid - keep it away from heat and ignition sources and keep the container closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant - this grade carries a carcinogen classification.\u003c\/strong\u003e Deostor Fire - Floral is classified Carcinogenicity Category 1B, hazard statement \u003cstrong\u003eH350 - may cause cancer\u003c\/strong\u003e, along with H335 for respiratory irritation and H317 for skin sensitisation. The Citrus grade carries none of those three. If either fragrance would suit the job, that is a real reason to choose Citrus.\u003c\/p\u003e\n\u003cp\u003eWhere Floral is the right call, treat it accordingly: gloves and eye protection, respiratory protection when spraying or fogging, good ventilation, no skin contact. Read the safety data sheet in full and make sure it reaches whoever is actually handling the product, not just whoever ordered it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA note on transport.\u003c\/strong\u003e Actichem state the product is \u003cem\u003enot regulated for transport of dangerous goods in pack sizes of 5 litres or less\u003c\/em\u003e. That exemption is about how it may be shipped. It does not mean the product is non-hazardous, and it does not change how you store or handle it on site. We think that exemption is where the old wording on this page came from.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202509-Actichem-Deostor-Fire-Floral-AP522.pdf\"\u003eDownload the Actichem safety data sheet for AP522 (PDF, issued 30 September 2025)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eActichem Deostor Fire - Floral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActichem product code\u003c\/td\u003e\n\u003ctd\u003eAP522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCW SKU\u003c\/td\u003e\n\u003ctd\u003eAP522.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litre (also available in 1 litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eConcentrate - dilute before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003ePink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eFloral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003e1:50 to 1:25 (20-40 ml per litre)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched to\u003c\/td\u003e\n\u003ctd\u003eSmoke and soot odours from plastic and synthetic fires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\u003ctd\u003eAbove 23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM\u003c\/td\u003e\n\u003ctd\u003e3Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the odour control range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-citrus-5-ltr\"\u003eDeostor Fire - Citrus\u003c\/a\u003e - timber, paper, protein and synthetic fires. Signal word Warning, no carcinogen classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-fire-floral-5-ltr\"\u003eDeostor Fire - Floral\u003c\/a\u003e - plastic and synthetic fires. Signal word Danger, carries H350.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-organic-5-ltr\"\u003eDeostor Organic\u003c\/a\u003e - decaying matter, human and animal waste\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-extreme-5-ltr\"\u003eDeostor Extreme\u003c\/a\u003e - booster for tobacco, curry and cadaverine. Always blended, never neat.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-deostor-spray-5-ltr\"\u003eDeostor Spray\u003c\/a\u003e - ready-to-use hand spray for small areas. Do not fog it.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/actichem-odourtak-sv-citrus-5-ltr\"\u003eOdourtak SV\u003c\/a\u003e and \u003ca href=\"\/products\/actichem-odourtak-w-citrus-5-ltr\"\u003eOdourtak W\u003c\/a\u003e - ready-to-use fogging solutions for the finishing step\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDeostor or Odourtak?\u003c\/h2\u003e\n\u003cp\u003eMost fire work uses both. \u003cstrong\u003eDeostor\u003c\/strong\u003e is a concentrate you dilute into your knock-down or wash-down solution - it treats surfaces and the wash water during remediation. \u003cstrong\u003eOdourtak\u003c\/strong\u003e is ready to use and is fogged into the space afterwards, to reach the air and the cavities the smoke got into.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCitrus or Floral?\u003c\/h3\u003e\n\u003cp\u003eMatch it to the fuel: Citrus for timber, paper, protein and synthetic fires; Floral for plastic and synthetic fires. On a mixed-fuel fire where either would do, note that Floral carries a carcinogen and respiratory classification and Citrus does not - see the comparison above.\u003c\/p\u003e\n\u003ch3\u003eHow much do I use?\u003c\/h3\u003e\n\u003cp\u003e20-40 ml per litre of water depending on odour severity, or 40 ml per litre for initial knock-down. As an additive to a ready-to-use restoration solution, 10-30 ml per litre.\u003c\/p\u003e\n\u003ch3\u003eCan I fog it?\u003c\/h3\u003e\n\u003cp\u003eYes - Actichem list cold and wet fogging as a suitable application for Deostor Fire, as well as pressure spraying. That is different from Deostor Spray, which must not be fogged.\u003c\/p\u003e\n\u003ch3\u003eIs it hazardous?\u003c\/h3\u003e\n\u003cp\u003eYes. Signal word DANGER. It is a Category 3 flammable liquid, an eye irritant, a skin sensitiser, a respiratory irritant, and it carries H350 - may cause cancer. The page used to say non-hazardous; that was wrong and has been corrected. The fact that it ships unregulated in packs of 5 litres or less is a transport exemption, not a hazard rating.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with bleach or an oxidiser?\u003c\/h3\u003e\n\u003cp\u003eNot without asking Actichem first. They call this out explicitly for chlorine and oxidising solutions.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eOn a heavy fire job, one of the first battles is simply getting the odour under enough control for the restoration work to proceed. Deostor Fire can be used for that initial knockdown, then carried through the wash-down by adding it to the restoration cleaning solution. The mistake we see is treating that first odour reduction as proof the source is gone — if soot and fire residues remain, the odour problem hasn’t been finished.\u003c\/p\u003e\n\u003cp\u003eFor the variants, Citrus is aimed particularly at protein, paper and timber fire odours, while Floral is aimed at plastic and synthetic fire odours.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure which grade the job calls for, or how to blend it with what you already run? Ring Carpet Cleaners Warehouse before you order. On this range the fragrance choice carries a safety difference as well as a performance one, and it is worth two minutes on the phone.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44286186881237,"sku":"AP522.05","price":221.21,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Deostor-Fire-Floral-5-ltr.jpg?v=1780551527"},{"product_id":"actichem-forest-fresh-15-ltr","title":"Actichem Forest Fresh 15 Ltr","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActichem Forest Fresh\u003c\/strong\u003e is a neutral antibacterial all-purpose detergent, ideal for cleaning and sanitising bacteria-sensitive areas. It uses a combination of germicides that kill bacteria, along with a pleasant perfume, to effectively deodorise and freshen a wide variety of areas. For areas such as sick bays, hospital wards and change rooms, where odour control is an issue, Forest Fresh makes an ideal all-round cleaner for all hard surfaces. It removes the bacteria that cause foul odours, rather than masking them. This listing is the 15 litre bulk pack, Actichem code RG651.15.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKills SARS-CoV-2 (COVID-19 virus) - \u003ca href=\"https:\/\/www.tga.gov.au\/\" rel=\"noopener\" target=\"_blank\"\u003eTGA Australia listing\u003c\/a\u003e AUST L 374141.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt cleans and disinfects in one operation, so it replaces a detergent and a separate sanitiser on most hard-surface routines. At 20 to 40 ml per litre, 15 litres of concentrate makes roughly 375 to 750 litres of working solution.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-bacterial.\u003c\/strong\u003e Will efficiently kill a broad spectrum of bacteria (Commercial Disinfectant Grade), including organisms such as \u003cem\u003ePseudomonas\u003c\/em\u003e, \u003cem\u003eEscherichia coli\u003c\/em\u003e and \u003cem\u003eStaphylococcus aureus\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePotentiated.\u003c\/strong\u003e Contains an effective surfactant and wetting agent, which enhances the ability of the sanitiser to penetrate and destroy the bacteria effectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeodorises.\u003c\/strong\u003e Has a fresh, lingering floral fragrance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile.\u003c\/strong\u003e Cleans and sanitises in one operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQAC-based.\u003c\/strong\u003e Based on a QAC-type disinfectant (alkyl benzyl ammonium chloride, sometimes known as benzalkonium chloride).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface safe.\u003c\/strong\u003e Safe to use on all types of floors, whether sealed or not. Will not dull polished flooring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy the 15 litre pack\u003c\/h2\u003e\n\u003cp\u003eAt standard dilution the 15 litre pack yields somewhere between 375 and 750 litres of working solution. For a contract cleaning round, a facility with its own cleaning staff, or any site getting through disinfectant weekly, that is a materially lower cost per litre than buying three 5 litre jerricans.\u003c\/p\u003e\n\u003cp\u003eIt is the wrong pack if Forest Fresh is an occasional product for you. Fifteen litres takes up real shelf space and is harder to handle safely than a 5 litre. If you use it now and then, buy the \u003ca href=\"\/products\/actichem-forest-fresh-5-ltr\"\u003e5 litre pack\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eIf you do run the 15 litre, set up a proper decanting station with a tap or a drum pump and a marked measuring jug. It is faster, more accurate on dilution, and it removes the operation where the eye splash risk described under Safety actually occurs.\u003c\/p\u003e\n\u003ch2\u003eWhere Forest Fresh fits\u003c\/h2\u003e\n\u003cp\u003eForest Fresh is a commercial-grade disinfectant and cleaner. It is the right product for routine cleaning and sanitising of hard surfaces in places where bacterial odour is the problem - washrooms, change rooms, sick bays, wards, kitchens, gyms, childcare and aged care floors, waste areas and bin rooms.\u003c\/p\u003e\n\u003cp\u003eIt is the wrong product where you need a \u003cstrong\u003ehospital-grade\u003c\/strong\u003e disinfectant, where you are treating mould rather than bacteria, or where you are deodorising soft furnishings and carpet rather than hard surfaces. Forest Fresh is listed as Commercial Disinfectant Grade, which is not the same thing as hospital grade. If your scope of works calls for hospital grade, use \u003ca href=\"\/products\/thymox-5-ltr\"\u003eThymox\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eSurfaces\u003c\/h2\u003e\n\u003cp\u003eSealed and unsealed floors, natural stone, ceramic and porcelain, concrete and masonry, plasterboard, rubber, timber and vinyl. The neutral pH is what makes it safe on polished floors - it cleans without stripping or dulling the finish, so it suits maintenance routines on sealed and burnished surfaces where an alkaline cleaner would cause problems over time.\u003c\/p\u003e\n\u003cp\u003eAlways pre-test the cleaning solution on the surface to be cleaned.\u003c\/p\u003e\n\u003ch2\u003eDilution\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eRate\u003c\/th\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning and sanitising hard surfaces\u003c\/td\u003e\n\u003ctd\u003e40 ml per litre of water\u003c\/td\u003e\n\u003ctd\u003e1:25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning and sanitising floors, or general deodorising\u003c\/td\u003e\n\u003ctd\u003e20 ml per litre of water\u003c\/td\u003e\n\u003ctd\u003e1:50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhere large amounts of organic matter are present\u003c\/td\u003e\n\u003ctd\u003eHigher than the rates above\u003c\/td\u003e\n\u003ctd\u003eStronger than 1:25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the safety data sheet before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test the cleaning solution on the surface to be cleaned.\u003c\/li\u003e\n\u003cli\u003eApply the solution using clean equipment.\u003c\/li\u003e\n\u003cli\u003eScrub if the soil is stubborn.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllow at least 5 minutes of contact time for maximum anti-bacterial efficiency.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRinse with clear water if desired.\u003c\/li\u003e\n\u003cli\u003eSoak bed pans and similar items in Forest Fresh solution for 5 minutes or longer before rinsing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eThe 5 minute contact time is the step most often skipped, and it is the step that does the disinfecting.\u003c\/strong\u003e Spraying a surface and wiping it dry straight away cleans it but does not sanitise it. The surface has to stay visibly wet with solution for the full five minutes. On a warm day or a porous surface that usually means going back over the area a second time rather than relying on the first application to stay wet.\u003c\/p\u003e\n\u003cp\u003eApply the solution using clean equipment. Quaternary ammonium disinfectants are deactivated by anionic detergent residue, so a mop or cloth still carrying ordinary floor detergent will reduce the effectiveness of the Forest Fresh solution. Rinse equipment out before you change over.\u003c\/p\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis listing previously described Forest Fresh as non-hazardous. That was incorrect and it has been corrected here.\u003c\/strong\u003e Actichem's current safety data sheet, RG651 version 2.4 issued 9 January 2026, classifies the concentrate as a hazardous chemical.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSignal word: DANGER\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSkin Corrosion \/ Irritation Category 2 - \u003cstrong\u003eH315, causes skin irritation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSerious Eye Damage Category 1 - \u003cstrong\u003eH318, causes serious eye damage\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-dangerous goods. No HAZCHEM code. No poison schedule. Ships unregulated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis matters more with the 15 litre pack than with the 5 litre.\u003c\/strong\u003e The classification applies to the concentrate, and H318 means a splash of undiluted product into an unprotected eye can cause irreversible damage. The operation where that actually happens is decanting - lifting, tipping and pouring a 15 litre jerrican into a bucket or measuring container. Goggles, gloves and an eye wash unit are not optional at the decanting station.\u003c\/p\u003e\n\u003cp\u003ePersonal protective equipment specified in the safety data sheet:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChemical goggles, or safety glasses with side shields\u003c\/li\u003e\n\u003cli\u003eElbow-length chemical protective gloves - neoprene or butyl\u003c\/li\u003e\n\u003cli\u003eAccess to an eye wash unit wherever the concentrate is handled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf concentrate enters an eye, wash out immediately with fresh running water for 10 to 15 minutes and seek medical attention. If it contacts skin, remove contaminated clothing and flush the skin and hair with running water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne discrepancy worth knowing about.\u003c\/strong\u003e Actichem's own product page gives the signal word as Warning. Their current safety data sheet for the same product code says DANGER, and so did the previous version. We publish the safety data sheet position because it is the controlled document, and we have asked Actichem to confirm it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/RG651-Forest-Fresh-09012026.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload the current Forest Fresh safety data sheet (RG651, version 2.4, 09\/01\/2026)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe sheet \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202210-Actichem-Forest-Fresh-RG651.pdf\" rel=\"noopener\" target=\"_blank\"\u003epreviously hosted here (version 2.2, 28\/10\/2022)\u003c\/a\u003e is superseded. The classification is unchanged between the two versions, but use the 2026 sheet.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct code\u003c\/th\u003e\n\u003ctd\u003eRG651\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU (this pack)\u003c\/th\u003e\n\u003ctd\u003eRG651.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct form\u003c\/th\u003e\n\u003ctd\u003eLiquid concentrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eGreen (safety data sheet: clear green liquid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFragrance\u003c\/th\u003e\n\u003ctd\u003eCrisp forest pine (safety data sheet odour descriptor: eucalyptus \/ pine)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003epH\u003c\/th\u003e\n\u003ctd\u003e8.5 as published by Actichem and previously by CCW. SDS v2.4 gives a range of 7.5 to 8.5. Both are shown until Actichem confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003ctd\u003e1:25 to 1:50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYield\u003c\/th\u003e\n\u003ctd\u003eApproximately 375 to 750 litres of working solution per 15 litre pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContact time\u003c\/th\u003e\n\u003ctd\u003eAt least 5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific gravity\u003c\/th\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDangerous goods\u003c\/th\u003e\n\u003ctd\u003eNot classified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal word\u003c\/th\u003e\n\u003ctd\u003eDANGER (SDS v2.4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack sizes\u003c\/th\u003e\n\u003ctd\u003eActichem list a 1 litre chamber, 5 litre and 15 litre. CCW stock the 5 litre and 15 litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVendor\u003c\/th\u003e\n\u003ctd\u003eActichem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe concentrate is a quaternary ammonium chloride disinfectant with isopropanol and two proprietary surfactants, each below 5 per cent per the safety data sheet. The full ingredient list with CAS numbers is in section 3 of the sheet linked above.\u003c\/p\u003e\n\u003ch2\u003eApprovals and certifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTGA listed, AUST L 374141\u003c\/strong\u003e, to kill SARS-CoV-2 and a broad spectrum of bacteria. We reproduce this listing exactly as Actichem publish it, including the organisms named above. It should not be read as covering organisms or viruses that are not named.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGECA certified, licence ACT-2024.\u003c\/strong\u003e Forest Fresh is listed as RG651 on Good Environmental Choice Australia licence ACT-2024, issued to Actichem Pty Ltd on 22 November 2024 against the Cleaning Products standard CPv3.0-2022, with conformance assessed by Bureau Veritas. The licence is current until 10 June 2027, and the certificate names the product without restriction as to pack size.\u003c\/p\u003e\n\u003cp\u003eGECA is a Type 1 ecolabel operating to ISO 14024, which means the assessment is made by an independent body against a published standard rather than by the manufacturer. Certified cleaning products can contribute to Green Star and WELL building ratings, which is why the certification often appears as a tender requirement rather than a preference. The certificate is published by GECA and can be read in full as \u003ca href=\"https:\/\/www.geca.eco\/s\/ACT-2024.pdf\" target=\"_blank\" rel=\"noopener\"\u003elicence ACT-2024\u003c\/a\u003e. We will supply a copy for tender documentation on request.\u003c\/p\u003e\n\u003ch2\u003ePack sizes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/actichem-forest-fresh-5-ltr\"\u003eForest Fresh 5 litre - RG651.05\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eForest Fresh 15 litre - RG651.15 (this listing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes Forest Fresh actually kill COVID-19?\u003c\/h3\u003e\n\u003cp\u003eIt is TGA listed under AUST L 374141 to kill SARS-CoV-2, the virus that causes COVID-19. That listing depends on using it correctly: at the right dilution, on a pre-cleaned surface, with at least 5 minutes of contact time. A quick wipe-over does not achieve it.\u003c\/p\u003e\n\u003ch3\u003eWhat dilution should I use?\u003c\/h3\u003e\n\u003cp\u003e1:25, or 40 ml per litre, for cleaning and sanitising hard surfaces. 1:50, or 20 ml per litre, for floors and general deodorising. Go stronger than 1:25 where there is a lot of organic matter present, because soil load consumes the disinfectant before it reaches the bacteria.\u003c\/p\u003e\n\u003ch3\u003eDo I need to rinse it off?\u003c\/h3\u003e\n\u003cp\u003eOnly if you want to. Rinse with clear water if desired. On food contact surfaces, rinse. On floors, most operators leave it to dry so the residual fragrance carries.\u003c\/p\u003e\n\u003ch3\u003eIs it hospital grade?\u003c\/h3\u003e\n\u003cp\u003eNo. Actichem list it as Commercial Disinfectant Grade. That is a genuine disinfectant classification and it is appropriate for the great majority of commercial cleaning work, but it is a different category from hospital grade. If your scope of works specifies hospital grade, use \u003ca href=\"\/products\/thymox-5-ltr\"\u003eThymox\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWill it damage polished or sealed floors?\u003c\/h3\u003e\n\u003cp\u003eNo. The neutral pH is the point of the product. It will not dull polished flooring and it is safe on sealed and unsealed floors alike, which is why it suits maintenance routines where a strongly alkaline cleaner would degrade the finish over time.\u003c\/p\u003e\n\u003ch3\u003eWhy does the label say non-hazardous elsewhere and this page says Danger?\u003c\/h3\u003e\n\u003cp\u003eBecause the earlier wording on this page was wrong and we have corrected it. Actichem's safety data sheet, version 2.4 dated 9 January 2026, classifies Forest Fresh as Serious Eye Damage Category 1 with the signal word DANGER. Their website still shows Warning. The safety data sheet is the controlled document and takes precedence, and we have raised the inconsistency with Actichem.\u003c\/p\u003e\n\u003ch3\u003eHow long will 15 litres keep?\u003c\/h3\u003e\n\u003cp\u003eActichem do not publish a shelf life for Forest Fresh and we will not invent one. Stored sealed and upright, out of direct sunlight, in the polyethylene or polypropylene container it ships in, it is a stable product. Buy the 15 litre because you will use it within a reasonable period, not to sit on for years.\u003c\/p\u003e\n\u003ch2\u003eWhat we see in the field\u003c\/h2\u003e\n\u003cp\u003eThe mistake we see with disinfectant cleaners isn’t usually the dilution — it’s contact time. A technician can spray a surface with the right product and then wipe it straight back off, effectively turning a disinfecting procedure into a very quick clean. Forest Fresh requires the surface to remain treated long enough for the antimicrobial chemistry to do its job, and stubborn soil should still be physically removed rather than expecting disinfectant chemistry to replace cleaning.\u003c\/p\u003e\n\u003cp\u003eOn heavily contaminated surfaces, organic loading also matters. That’s why serious contamination jobs need more thought than simply “spray, wipe and move on.”\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eNot sure whether Forest Fresh meets the disinfectant requirement in your contract or cleaning specification, or whether the 15 litre is the right pack for your usage? Call or email us before you order. We would rather check the grade and the listing with you than have you buy a product that does not satisfy an audit.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15LTR","offer_id":44293168922837,"sku":"RG651.15","price":155.16,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Forest-Fresh-15-ltr.jpg?v=1780551527"},{"product_id":"actichem-tile-grout-power-5-ltr","title":"Actichem Tile \u0026 Grout Power 5 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Tile \u0026amp; Grout Power is the heavy-duty alkaline cleaner in the hard floor range. Removing grease, oils and general grime is what it does exceptionally well. It is also versatile, which is why cleaning specialists use it on tiles, natural stone and concrete that need an extra brutal hit to get a result. As well as grease and oily grime, it quickly removes carbon build-up from almost any hard surface.\u003c\/p\u003e\n\u003cp\u003eIt is the \u003cstrong\u003ealkaline\u003c\/strong\u003e counterpart to Actichem’s acid restorers. Where the acid products dissolve mineral scale, cement smear and efflorescence, Tile \u0026amp; Grout Power attacks organic soil — grease, oil, carbon and food residue. It is also the correct choice on acid-sensitive stone, where an acid restorer would etch the surface.\u003c\/p\u003e\n\u003cp\u003eThis product is an excellent replacement for PowerClean TileClenz PRO.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadical cleaning strength\u003c\/strong\u003e — high caustic content provides power cleaning of ceramic tiles and grout, terracotta, concrete and other resilient surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — a high-tech surfactant system, combined with speciality penetrating agents and a powerful alkali blend, delivers top cleaning performance across a broad spectrum of soil types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease and oils\u003c\/strong\u003e — cleans with special distinction on oily and greasy soils, carbon build-ups and automotive soiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow odour formula\u003c\/strong\u003e — makes it easier to use in occupied buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuited to food premises\u003c\/strong\u003e — used in food preparation areas, food factories and bakeries. See the rinsing note under Safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-concentrate\u003c\/strong\u003e — highly economical dilution ratios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eIdeally suited for use on all resilient flooring, including concrete floors, ceramic tiles, terracotta and grout lines. Excellent in applications such as industrial kitchens, refuse compactor areas, workshop floors, food processing facilities, bakeries and public eating areas. It is safe on all man-made tiles, natural stone products, grout and concrete at recommended dilutions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use or allow Tile \u0026amp; Grout Power to contact painted surfaces, non-ferrous metal surfaces — especially aluminium — or polymer-coated flooring.\u003c\/strong\u003e Caustic attacks aluminium readily, and the reaction produces hydrogen.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the SDS before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eTile \u0026amp; Grout Power is corrosive. Use chemical goggles, gloves, protective clothing and warning signage — see Safety below for the full SDS specification.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep clean applications\u003c\/strong\u003e — 1 part Tile \u0026amp; Grout Power to 10 to 20 parts water (100 to 50 ml per litre)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard cleaning applications\u003c\/strong\u003e — 1 part to 80 to 120 parts water (12 to 8 ml per litre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution with a mop and bucket, an auto-scrubber, or a pressure washer.\u003c\/li\u003e\n\u003cli\u003eAgitate heavily soiled areas using a stiff brush, an auto-scrubber, or a slow-speed rotary scrubber.\u003c\/li\u003e\n\u003cli\u003eAllow 10 minutes dwell time and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eOur page has always described Tile \u0026amp; Grout Power as corrosive, and that is correct. What it did not carry was the signal word, the hazard statements, the transport classification, the full PPE specification or first aid. Those are below.\u003c\/p\u003e\n\u003cp\u003eTile \u0026amp; Grout Power is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e14\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: potassium hydroxide 10 to less than 30%; sodium hydroxide, sodium metasilicate pentahydrate, monoethanolamine and potassium pyrophosphate, each below 10%\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN1760, Class 8, Packing Group II.\u003c\/strong\u003e Limited quantity threshold 1 litre — every pack size we sell is above it and travels as regulated dangerous goods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003epH 14 is the top of the scale.\u003c\/strong\u003e This is caustic soda and caustic potash chemistry. It saponifies fat, which is exactly why it removes grease so well — and skin is largely fat and protein. Caustic burns are often painless at first and deepen over minutes, so a splash that does not sting is not a splash you can ignore.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles, elbow-length PVC gloves, overalls and a PVC apron\u003c\/strong\u003e, with access to an eye wash unit and a safety shower. Use warning signage — a wet caustic floor is a hazard to anyone who walks onto it.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Flush continuously with running water for at least 15 minutes, holding the eyelids apart. \u003cstrong\u003eTransport to hospital without delay.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately flush with large amounts of water and remove contaminated clothing. Transport to hospital or a doctor.\u003c\/p\u003e\n\u003ch3\u003eFood premises — rinse properly\u003c\/h3\u003e\n\u003cp\u003eThis product is used in bakeries, food factories and public eating areas, and it works well there. It is a \u003cstrong\u003ecleaner, not a sanitiser\u003c\/strong\u003e, and at pH 14 it must be rinsed thoroughly with potable water before any food contact surface returns to service. Where a disinfection step is also required, complete the clean, rinse, and then apply a TGA-listed disinfectant such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTile \u0026amp; Grout Power is a strong alkali. The acid restorers we sell for the same floors are its chemical opposite.\u003c\/strong\u003e Mixing a strong acid with a strong alkali releases a great deal of heat very quickly, which can boil and spit corrosive liquid out of the bucket. Avoid contact with acids and oxidising agents.\u003c\/p\u003e\n\u003cp\u003eNever mix, and never allow contact in a bucket, drain, extraction tank or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e — 60% phosphoric acid\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eActichem Crete Clean\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eActichem Rust Remover\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAny acid rinse, descaler or efflorescence remover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSequencing on the same floor is common and is fine — if you rinse.\u003c\/strong\u003e Alkaline clean, rinse thoroughly with clean water, then acid restore, then neutralise. What is not fine is a shared bucket, a shared auto-scrubber tank, or an unrinsed floor between steps.\u003c\/p\u003e\n\u003cp\u003eAlso avoid contact with aluminium and other non-ferrous metals. Caustic attack on aluminium produces hydrogen, which is flammable.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP163.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eOdourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — deep clean\u003c\/td\u003e\n\u003ctd\u003e1:10 to 1:20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — standard clean\u003c\/td\u003e\n\u003ctd\u003e1:80 to 1:120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActives\u003c\/td\u003e\n\u003ctd\u003ePotassium hydroxide 10–30%; sodium hydroxide, sodium metasilicate, monoethanolamine, potassium pyrophosphate each \u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN1760, Class 8, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids, oxidising agents, aluminium and other non-ferrous metals, painted surfaces, polymer-coated flooring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 14 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing Between the Hard Floor Chemicals\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-15-ltr\"\u003eActichem Tile \u0026amp; Grout Power 15 Ltr\u003c\/a\u003e — the same product in the bulk pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-5-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the lower-hazard everyday cleaner, and the 1:300 neutralising rinse used after acid restoration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-5-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e — acid. Use for mineral scale, cement smear and efflorescence. Tile \u0026amp; Grout Power will not shift those.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-5-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-5ltr\"\u003eGrout Restore 60\u003c\/a\u003e — stronger acid restorers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe short version:\u003c\/strong\u003e greasy, oily, carbon or food soil is an alkaline job. Chalky, scaly, cementitious or rust-stained soil is an acid job. Acid-sensitive stone is always an alkaline job.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-TG-Power-AP163.pdf\"\u003eActichem Tile \u0026amp; Grout Power Safety Data Sheet — version 2.3, issued 14 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP163.05\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot sure whether the soil in front of you is an alkaline problem or an acid one? Send us a photo before you order. Using the wrong one wastes a trip, and on the wrong substrate it does permanent damage.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"5LTR","offer_id":44293168955605,"sku":"AP163.05","price":82.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Tile-Grout-Power-5-ltr.jpg?v=1780551528"},{"product_id":"actichem-tile-grout-power-15-ltr","title":"Actichem Tile \u0026 Grout Power 15 ltr","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eActichem Tile \u0026amp; Grout Power is the heavy-duty alkaline cleaner in the hard floor range. Removing grease, oils and general grime is what it does exceptionally well. It is also versatile, which is why cleaning specialists use it on tiles, natural stone and concrete that need an extra brutal hit to get a result. As well as grease and oily grime, it quickly removes carbon build-up from almost any hard surface.\u003c\/p\u003e\n\u003cp\u003eIt is the \u003cstrong\u003ealkaline\u003c\/strong\u003e counterpart to Actichem’s acid restorers. Where the acid products dissolve mineral scale, cement smear and efflorescence, Tile \u0026amp; Grout Power attacks organic soil — grease, oil, carbon and food residue. It is also the correct choice on acid-sensitive stone, where an acid restorer would etch the surface.\u003c\/p\u003e\n\u003cp\u003eThis 15 litre pack is the production size. At 1:80 to 1:120 for standard cleaning it makes well over a thousand litres of working solution. This product is an excellent replacement for PowerClean TileClenz PRO.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadical cleaning strength\u003c\/strong\u003e — high caustic content provides power cleaning of ceramic tiles and grout, terracotta, concrete and other resilient surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetration\u003c\/strong\u003e — a high-tech surfactant system, combined with speciality penetrating agents and a powerful alkali blend, delivers top cleaning performance across a broad spectrum of soil types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease and oils\u003c\/strong\u003e — cleans with special distinction on oily and greasy soils, carbon build-ups and automotive soiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow odour formula\u003c\/strong\u003e — makes it easier to use in occupied buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuited to food premises\u003c\/strong\u003e — used in food preparation areas, food factories and bakeries. See the rinsing note under Safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-concentrate\u003c\/strong\u003e — highly economical dilution ratios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication Areas and Surface Suitability\u003c\/h2\u003e\n\u003cp\u003eIdeally suited for use on all resilient flooring, including concrete floors, ceramic tiles, terracotta and grout lines. Excellent in applications such as industrial kitchens, refuse compactor areas, workshop floors, food processing facilities, bakeries and public eating areas. It is safe on all man-made tiles, natural stone products, grout and concrete at recommended dilutions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not use or allow Tile \u0026amp; Grout Power to contact painted surfaces, non-ferrous metal surfaces — especially aluminium — or polymer-coated flooring.\u003c\/strong\u003e Caustic attacks aluminium readily, and the reaction produces hydrogen.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRead and understand the SDS before use.\u003c\/li\u003e\n\u003cli\u003eAlways pre-test in an inconspicuous location for substrate sensitivity to chemicals.\u003c\/li\u003e\n\u003cli\u003eTile \u0026amp; Grout Power is corrosive. Use chemical goggles, gloves, protective clothing and warning signage — see Safety below for the full SDS specification.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eDilution\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep clean applications\u003c\/strong\u003e — 1 part Tile \u0026amp; Grout Power to 10 to 20 parts water (100 to 50 ml per litre)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard cleaning applications\u003c\/strong\u003e — 1 part to 80 to 120 parts water (12 to 8 ml per litre)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply the solution with a mop and bucket, an auto-scrubber, or a pressure washer.\u003c\/li\u003e\n\u003cli\u003eAgitate heavily soiled areas using a stiff brush, an auto-scrubber, or a slow-speed rotary scrubber.\u003c\/li\u003e\n\u003cli\u003eAllow 10 minutes dwell time and re-agitate.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eOur page has always described Tile \u0026amp; Grout Power as corrosive, and that is correct. What it did not carry was the signal word, the hazard statements, the transport classification, the full PPE specification or first aid. Those are below.\u003c\/p\u003e\n\u003cp\u003eTile \u0026amp; Grout Power is classified as a \u003cstrong\u003eHAZARDOUS CHEMICAL\u003c\/strong\u003e and \u003cstrong\u003eDANGEROUS GOODS\u003c\/strong\u003e under the Model WHS Regulations and the ADG Code. It is a \u003cstrong\u003ePoisons Schedule 6\u003c\/strong\u003e substance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal word: \u003cstrong\u003eDANGER\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH314\u003c\/strong\u003e — causes severe skin burns and eye damage\u003c\/li\u003e\n\u003cli\u003eGHS: Skin Corrosion\/Irritation Category 1B; Serious Eye Damage Category 1\u003c\/li\u003e\n\u003cli\u003eHAZCHEM code: \u003cstrong\u003e2X\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003epH as supplied: \u003cstrong\u003e14\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eActives: potassium hydroxide 10 to less than 30%; sodium hydroxide, sodium metasilicate pentahydrate, monoethanolamine and potassium pyrophosphate, each below 10%\u003c\/li\u003e\n\u003cli\u003eTransport: \u003cstrong\u003eUN1760, Class 8, Packing Group II.\u003c\/strong\u003e Limited quantity threshold 1 litre — this 15 litre drum is well above it and travels as regulated dangerous goods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003epH 14 is the top of the scale.\u003c\/strong\u003e This is caustic soda and caustic potash chemistry. It saponifies fat, which is exactly why it removes grease so well — and skin is largely fat and protein. Caustic burns are often painless at first and deepen over minutes, so a splash that does not sting is not a splash you can ignore.\u003c\/p\u003e\n\u003ch3\u003ePersonal protective equipment\u003c\/h3\u003e\n\u003cp\u003eThe SDS specifies \u003cstrong\u003echemical goggles, elbow-length PVC gloves, overalls and a PVC apron\u003c\/strong\u003e, with access to an eye wash unit and a safety shower. Use warning signage — a wet caustic floor is a hazard to anyone who walks onto it. Decanting from a 15 litre drum is the highest-splash operation with this product; do it at bench height with the apron on, not on the floor.\u003c\/p\u003e\n\u003ch3\u003eFirst aid\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEyes.\u003c\/strong\u003e Flush continuously with running water for at least 15 minutes, holding the eyelids apart. \u003cstrong\u003eTransport to hospital without delay.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkin.\u003c\/strong\u003e Immediately flush with large amounts of water and remove contaminated clothing. Transport to hospital or a doctor.\u003c\/p\u003e\n\u003ch3\u003eFood premises — rinse properly\u003c\/h3\u003e\n\u003cp\u003eThis product is used in bakeries, food factories and public eating areas, and it works well there. It is a \u003cstrong\u003ecleaner, not a sanitiser\u003c\/strong\u003e, and at pH 14 it must be rinsed thoroughly with potable water before any food contact surface returns to service. Where a disinfection step is also required, complete the clean, rinse, and then apply a TGA-listed disinfectant such as \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-percide-5ltr\"\u003eActichem Percide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eNever Mix With Acid\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTile \u0026amp; Grout Power is a strong alkali. The acid restorers we sell for the same floors are its chemical opposite.\u003c\/strong\u003e Mixing a strong acid with a strong alkali releases a great deal of heat very quickly, which can boil and spit corrosive liquid out of the bucket. Avoid contact with acids and oxidising agents.\u003c\/p\u003e\n\u003cp\u003eNever mix, and never allow contact in a bucket, drain, extraction tank or on the floor, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-15ltr\"\u003eActichem Grout Restore 60\u003c\/a\u003e — 60% phosphoric acid\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-15-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-15-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-crete-clean-5-ltr\"\u003eActichem Crete Clean\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-rust-remover-5-ltr\"\u003eActichem Rust Remover\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAny acid rinse, descaler or efflorescence remover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSequencing on the same floor is common and is fine — if you rinse.\u003c\/strong\u003e Alkaline clean, rinse thoroughly with clean water, then acid restore, then neutralise. What is not fine is a shared bucket, a shared auto-scrubber tank, or an unrinsed floor between steps.\u003c\/p\u003e\n\u003cp\u003eAlso avoid contact with aluminium and other non-ferrous metals. Caustic attack on aluminium produces hydrogen, which is flammable.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct code\u003c\/td\u003e\n\u003ctd\u003eAP163.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e15 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFragrance\u003c\/td\u003e\n\u003ctd\u003eOdourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH as supplied\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — deep clean\u003c\/td\u003e\n\u003ctd\u003e1:10 to 1:20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDilution — standard clean\u003c\/td\u003e\n\u003ctd\u003e1:80 to 1:120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDwell time\u003c\/td\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActives\u003c\/td\u003e\n\u003ctd\u003ePotassium hydroxide 10–30%; sodium hydroxide, sodium metasilicate, monoethanolamine, potassium pyrophosphate each \u0026lt;10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWHS classification\u003c\/td\u003e\n\u003ctd\u003eHazardous chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\u003ctd\u003eDANGER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHazard statements\u003c\/td\u003e\n\u003ctd\u003eH314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHAZCHEM code\u003c\/td\u003e\n\u003ctd\u003e2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport\u003c\/td\u003e\n\u003ctd\u003eDangerous goods — UN1760, Class 8, Packing Group II. DG shipping surcharge applies.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\n\u003ctd\u003eSchedule 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncompatible with\u003c\/td\u003e\n\u003ctd\u003eAcids, oxidising agents, aluminium and other non-ferrous metals, painted surfaces, polymer-coated flooring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDS referenced\u003c\/td\u003e\n\u003ctd\u003eVersion 2.3, issued 14 July 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing Between the Hard Floor Chemicals\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-power-5-ltr\"\u003eActichem Tile \u0026amp; Grout Power 5 Ltr\u003c\/a\u003e — the same product in the smaller pack\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-cleaner-lf-15-ltr\"\u003eActichem Tile \u0026amp; Grout Cleaner LF\u003c\/a\u003e — the lower-hazard everyday cleaner, and the 1:300 neutralising rinse used after acid restoration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-tile-grout-restore-15-ltr\"\u003eActichem Tile \u0026amp; Grout Restore\u003c\/a\u003e — acid. Use for mineral scale, cement smear and efflorescence. Tile \u0026amp; Grout Power will not shift those.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-20-15-ltr\"\u003eActichem Grout Restore 20\u003c\/a\u003e and \u003ca href=\"https:\/\/ccwonline.com.au\/products\/actichem-grout-restore-60-15ltr\"\u003eGrout Restore 60\u003c\/a\u003e — stronger acid restorers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe short version:\u003c\/strong\u003e greasy, oily, carbon or food soil is an alkaline job. Chalky, scaly, cementitious or rust-stained soil is an acid job. Acid-sensitive stone is always an alkaline job.\u003c\/p\u003e\n\u003ch2\u003eSafety Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/files\/202507-Actichem-TG-Power-AP163.pdf\"\u003eActichem Tile \u0026amp; Grout Power Safety Data Sheet — version 2.3, issued 14 July 2025\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSKU: AP163.15\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDG shipping surcharge applies.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot sure whether the soil in front of you is an alkaline problem or an acid one? Send us a photo before you order. Using the wrong one wastes a trip, and on the wrong substrate it does permanent damage.\u003c\/p\u003e","brand":"Actichem","offers":[{"title":"15LTR","offer_id":44293333385429,"sku":"AP163.15","price":221.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2179\/6391\/products\/Actichem-Tile-Grout-Power-15-ltr.jpg?v=1780551529"}],"url":"https:\/\/ccwonline.com.au\/collections\/applied-products.oembed?page=16","provider":"Carpet Cleaners Warehouse","version":"1.0","type":"link"}