Product Search:  

Home |  About Us |  Policies |  Contact Us |  Register for our E-News |  Latest News |  View Cart

 
 

Name:

Email:


 

Chemicals > TIMBER FLOOR

BRIDGEPOINT WOOD FINISH SEMIGLOSS 3.8LTR

Price:

$111.59




QTY:

        
BRIDGEPOINT WOOD FINISH SEMIGLOSS 3.8LTR

  • Designed to be used as a preservation finish over an existing urethane finish over a hardwood floor.
  • A Low solid blend of urethane and acrylic.
  • Serves as the wear coat and protects the original finish of the floor.
  • For use on Hardwood Floors, Cabinets & Furniture.

Extraction Cleaning 

  • Vacuum floor thoroughly.
  • Mask off transitions from wood to other types of floors.
  • Mix one part Heavy Duty Hardwood Cleaner with 4 parts warm water in the cleaning machine. Adding a defoamer like Foamless to the waste tank is recommended for some machines and situations.
  • With the solution pumping, the brush rotating and the vacuum turned on, begin moving the machine forward at a moderate speed. Reverse on the same line at the same speed. Then continue into the next area with the same procedure. Remove any standing solution with an absorbent flat mop.
  • Mix one part Wood Fresh™ Hardwood Cleaner with 4 parts warm water in the cleaning machine
  • Proceed to clean and neutralize the complete floor in the same manner as explained above.
  • The cleaning and preparation steps are important. The dual cleaners both clean and treat the floor to make it more receptive to the Preservation Finish. Apply finish immediately after cleaning approximately 100 sq. mts.

Apply Preservation Finish 

  • Let the customer choose Gloss or Satin finish. Solids may settle to the bottom of the bottle over time. Shake or stir before and during use.
  • The finish may be applied with a dampened flat mop using either a clean cotton terry cloth cover or a microfiber cover. 30 minutes prior to applying the finish the container should be gently rocked to mix the ingredients.   
  • Start in the furthest area from your exit. Apply a small amount of finish in a 1 or 2 meter area, spreading it uniformly as you work your way back toward the exit door.
  • If a second coat is desired, allow one hour before applying.
  • Use abrasive cleaning method when applying finish to cabinets and furniture.

Helpful Hints 

  • Traffic: Allow one hour dry time before allowing stocking feet onto the finish. Allow 24 hours before shoe traffic and replacing furniture. Allow 48 hours before replacing rugs.
  • Prequalify: The system emphasizes the importance of preserving the original finish so hopefully, the customer will never have to go through the messy process of sanding and recoating their hardwood. This system does not make damaged or heavily scratched floors look like new. We suggest you under promise and then over perform.
  • Coverage: Approximately 100 sq. meters per gallon (3.78 ltrs)  


MSDS

Home |  About Us |  Policies |  Contact Us |  Register for our E-News |  Latest News |  View Cart
Copyright 2009  All Rights Reserved. Theme by Practical-Webs