HydraSolv is a high powered cleaning and degreasing agent specifically formulated for ceramic, porcelain, and quarry tile floors and their grout lines. It is used as a prespray/pretreatment on tile and grout to loosen, breakdown, dissolve, and emulsify even the grimiest of soils.
HydraBoost CT is a powder, high powered concrete and tile and grout cleaner and degreaser designed to safely and effectively dissolve, break down, dislodge, and emulsify even the grimiest soils from concrete, finished concrete, and ceramic, porcelain, and quarry tile floors and surfaces. Dilution: 15g/Ltr RTU pH: 11-12pH Contains: 2.95kg
Peroxide Activated Alkaline Concrete, Tile & Grout Cleaner and Degreaser. Viper Peroxiblast Powder is a synergistic product breakthrough that cleans and degreases the grungiest concrete, tile and grout floors, fixtures, and walls with a concentrated balance of surfactants and alkaline builders that are oxygen activated. This high performance, heavy-duty concrete, tile and grout cleaner and degreaser safely replaces mineral spirits and...
QCT with OxyBreak™ is a synergistic combination of specialty surfactants, hydrogen peroxide, and D-Limonene that quickly cleans and brightens the grimiest concrete, quarry tile, and ceramic tile and grout floors, fixtures, and walls.
Peroxide Activated Concrete, Tile & Grout Cleaner and Brightener Cleans and brightens even the grungiest concrete, tile or grout, floor, fixture or wall! Peroxibright CTG is a synergistic product breakthrough that cleans and brightens even the grungiest concrete, tile and grout floors, fixtures, and walls. The activated effervescent solution gets into every crevice, crack and pore to emulsify, dissolve and deflocculate even the most...
VIPER CONCRETE & STONE DENSIFIER Viper Concrete and Stone Densifier is ideal for use on softer stones, existing aggregate and concrete of any age. It fills in pores and capillaries in concrete for a smoother surface and to increase surface density to achieve a higher gloss when polishing. Using Viper Concrete and Stone Densifier on concrete before polishing will speed up the results and enhance the resulting shine on the floor.
Ideal pre-sealer with unique chemistry provides an abrasion resistant seal for concrete, stone and terrazzo. Forklift traffic leaves a very low level of tyre mark transfer. Recoats easily and unlike epoxies and urethanes, it can be cleaned and recoated without inter-coat hazing or delamination occurring. Suitable for use as a base seal over old oily floors. Can be applied without special equipment, an Oates poly cotton mop or wax applicator is all that is required.Caution: Before use, wear impervious chemical resistant gloves and safety glasses with side-shields.Note: Before use, dilute according to the application type as per the product label.
Water-based stain protector. It gives subsurface protection to stone, composite stone, marble, unglazed ceramics, smooth trowelled concrete. Can also be used to protect ornaments, sculptures, facades and columns. Invisible - use indoor and outdoor.
Stain protector for all stone and stone composites, concrete subsurface, granite, marble, limestone, sandstone, terrazzo, as well as smooth trowelled concrete. Locks out staining effects of water, food based spills, oil's and fats. Invisible - use indoor and outdoor.